Capitalise/close/delete asset under construction with zero value

Hi,
I have an AUC (aset under construction) with a zero value but I am unable to clear it as such.
How can I remove the open AUC from the reports and close/delete it?
Thanks
Keeley

Hi,
Go to t-code AS02. On the "*deactivation on" field under "General" Tab enter the current date or the last posting date recorded for the asset. Save the changes.
Regards,
Melu

Similar Messages

Asset under construction with MM

I try to enter a service sheet by ts ML81N. The purchase order is for limits with Account Assignment Category 'A' -asset- and Item Category is 'Service'. The asset class is 'asset under construction' (line item settlement).
The problem is when I go to ts ML81N, I cannot receive the purchase order because the screen appears with all the fields with status 'no change' (only display them).
Any idea if is necessary to active anything in customizing AA in order to do this kind of process??
Thanks,
Cecilia

hi,
When Purchase order comes in display mode, click on create service entry sheet. (Shift+F1), then click service selection.
regards,
Rama Mohan Bangaru

Steps for completing Asset under Construction

hi,
i have created the AUC asset class with line settlement checked.
will somebody be kind enough to show me the futher steps involved in customization along with postings and settlement procedure....
regards
sayeed

Hi,
You can manage the asset under construction in the system in two different ways, depending on the types of functions that you need. The asset under construction can be either a normal asset record, or a master record with line item management. As a result, the transfer from the asset under construction to completed fixed assets can be handled in one of two ways:
·        Summary transfer from a normal asset master record to the receiver assets (transaction type 348/349)
·        Line item settlement of an asset under construction that has line item management
The Investment Management (IM) component is recommended for handling large-scale capital investments. Using the IM component, you can manage a capital investment in parallel: for financial accounting purposes as an asset under construction, and for controlling purposes as an internal order or project. For more information, see the documentation for the Investment Management component.
Assets under Construction Without Line Item Management
The procedure corresponds to the procedure for the transfer between two assets within the same company code (see Posting the Splitting or Moving of an Asset). Before carrying out a full transfer of an asset under construction, you have to reverse any down payments that were posted in the current fiscal year. Down payments are ignored for a partial transfer.
Special transaction types for the transfer of assets under construction allow for transfers to be displayed in the asset history sheet as acquisitions to fixed assets.
Assets under Construction with Line Item Management
In the FI-AA component, you can accumulate costs under purely technical aspects in an asset under construction. You do not need to consider the later creation of fixed assets at this point. During the construction phase, you can accumulate all acquisitions for an investment in a single asset. These acquisitions include
·        External activity (acquisition from vendor)
·        Internal activity (internal order)
·        Stock material (withdrawal from warehouse)
in a single asset. When using this 'collective management' of assets under construction, it is possible to manage the individual acquisitions as open items over the course of several fiscal years. At completion, the line items must be cleared and then distributed to the various receivers. The system activates open item management when an asset under construction is created, if you set the corresponding indicator in the asset class. In addition, you have to assign a settlement profile to the company codes involved, in Customizing for Asset Accounting, in order for the line item settlement to work (see Define Settlement Profile in the Implementation Guide). The main function of the settlement profile is to specify the allowed receivers (such as, assets or cost centers).
Hope this helps you. Let me know if you need any other information.
Rgds
Manish

Asset Under Construction Issue

Hi,
I am facing problems while settling of Auc.
I created one asset with asset class of AuC. In Auc master i have given the Capex order type's internal order. After i posted few entries for Order. while entering of fi entries to order i didn't selected any asset number just i posted the fi entries with 40 and 50 posting key.
After i settled the order in KO88. It was settled.
After i run AIBU t code then system is saying no line items existed for order.
Without line items how can i settle the order.
Please explain me from start to end of Auc Settlement Process and Converting to asset of Auc. It is very very very urgent for me.
Sateesh

Hi
This works like this:
First we create Asset class for asset under construction with investment measure.
Assign GL accounts to that asset class
Create one asset master under that asset class
create secondary cost element with catagory external settlement.
create internal order type and select settlement with assets are optional.
create internal order
post entries to internal order
that particular internao order will capture the total cost for particual asset under construction.
once you finished that construction you will settle to one asset or multiple assets using external secondary cost element in assessment cycle.

Creating asset under construction

when i try to create asset under construction with the asset class 4000(asset under construction) i am getting the below error
Number range 40 not in the number allocation range
Message no. AA203
i checked in the trans code- OAOA also but i have already assigned 40 as the number range in it.
please help me with this issue..

Check the diagnosis for the message. It will clear your doubts.
Also check the procedure of the message, there you will find the link (AS08) to maintain the number range.

Internal Orders with AUC ( Assets under construction) Config steps

Dear Experts,
Can you send me the step by step configuration for Internal order with Asset Under Construction
Thanks
Sanjai

Hi nick,
you can maintain this in the settlementrule of the internal order, Type ANL
Best regards
Horst

Mass Capitalisation Asset under Construction to Final Asset

Dear all
Is there any process to mass capitalise Assets under Construction to Final Assets. My client has many assets under construction which need to be settled to a final asset on a periodic basis. They are currenly using t-codes AIBU and AIAB however is there a way to do this for many AuC at one go. Thank you.
Regards
PRG

Hi
You can try using an LSMW for AIAB and AIBU...
I dont think we have any T codes for MASS settlements, unless you have IM active and you use WBS or IO for AUC... In that case, you can use CJ8G or KO8G
br, Ajay M

Error in dep run - Asset under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!
with regards,
Prabhakar

Hi,
I had the similar situation couple of months back. I followed below mentioned process and it worked out well.
1) Maintain GL account for depreciation in AO90
2) restart depreciation run for the relevant period
3) change the depreciation key to 0000
4) repeat depreciation run for the same period (It will post a reverse entry in the same month itself. So the net impact of depreciation in the same month is zero).
By the way I have a suggestion to prevent this issue in future.
You may not be able to detect this issue on test run if you execute on foreground mode because the test run execution is restricted to 1000 assets. If the error is on 1001th asset, you will not know.
Hence, always execute depreciation test run on background mode, check for any errors and execute production run only if there are no errors.
Hope this helps....
Best Regards,
Madhu

Assign value to asset under construction

Hi Sirs,
I would like to know what i have to do to solve the problem with value for asset under construction. When I create asset with tr. AS91 in area for Takeover values, the field for ***.acquis.val. is not active.
Thank you in advance.
Regards,
Dani

Hi Dani
I assume that you have maintained the takeover date and period for last depreciation posted in the old system. Apart from this you have to make sure that the capitalisation date in asset master should be prior to takeover date, In order for system to recognize that asset is a takeover asset this is very important. when all the input fields are greyed , this means system does not determine it to be an old asset which it derives from cap date.
Rgds,
Zub

Asset under construction not completely credited

Hi,
We are getting the message "asset under construction not completely credited" when trying to process an actual settlement for an internal order. We have checked all our settlement rules and read SAP Note 726031 but we are still getting stuck on this error. It may have something to do with a 2c USD balance on the AUC that doesn't want to clear. The local (AUD) balance is zero. We tried posting a 2c USD transaction to the Order but that didn't work either.
Thanks
Bill

Hello,
Check the AUC balances and also check the settlement rule upto which period it is maintained. If the to period is ended with value and remove the " To period" and settle the values.
Thanks
Lakshmi Narayana

TCode MIR7: Dump while deleting Parked Invoice with zero value

Hi,
We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7.
In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows:
Error analysis
    Short text of error message:
    No document found
    Long text of error message:
    Technical information about the message:
    Message class....... "FI"
    Number.............. 124
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLFMPR" or "LFMPRU05"
    "FM_CO_DOCUMENT_DELETE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which actions and input led to the error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLFMPR" - in
     "FM_CO_DOCUMENT_DELETE".
    The main program was "SAPLMR1M ".
    In the source code you have the termination point in line 34
    of the (Include) program "LFMPRU05".
Any help.
Regards,
CMC Team.

Hi,
Check following SAP notes:-
1173846 (MM) Termination when deleting prepaid logistics invoices
Reason and Prerequisites
This problem is caused by a program error.
1224772 (MM) Error message FI24 when deleting parked invoices
Reason and Prerequisites
This is due to a program error. The total amount of the parked invoice is '0'.
Regards,
Anand Raichura

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

Capitalize borrowing costs to asset under construction u2013 IAS23

Dear experts,
According to IAS 23 we are required to calculate interest on capital invested in an asset under construction.
Borrowing costs that are directly attributable to the acquisition, construction or production of a qualifying asset form part of the cost of that asset. Where funds are borrowed specifically, costs eligible for capitalization are the actual costs incurred less any income earned on the temporary investment of such borrowings. Where funds are part of a general pool, the eligible amount is determined by applying a capitalization rate to the expenditure on that asset. The capitalization rate will be the weighted average of the borrowing costs applicable to the general pool. The amount of borrowing costs that an entity capitalizes during a period shall not exceed the amount of borrowing costs it incurred during that period.
Detail scenario
The construction of a qualifying asset is controlled by an investment measures that are managed as projects - WBS elements and settled to an asset under construction periodically. The calculated interest shall update only the determine depreciation area set on the interest profile (OPIB).
The borrowing operations are managed by money market transaction on TRM (Prod. Category 550 Interest rate instrument).
Using the interest calculation function (CJZ2 - Individual Processing or CJZ1 - Collective Processing) we encountered several problems/ restrictions.
1 u2013 When funds are borrowed specifically to a qualifying asset for example, an interest rate instrument as a money market transaction on TRM should be capitalized according to the actual incurred borrowing cost and not by a capitalization rate. How to assign the value to the WBS element?
2 u2013 When funds are part of a general pool, although we can calculate and update the effective interest rate for each borrowing transaction (TMEZ) how to determine the weighted average capitalization rate by company code and define it on the Reference Interest Rates (OBAC) to be used in the interest calculation?
3 u2013 Even if the capitalization rate is defined and updated manually in the reference interest rate for the interest calculation, how to limit the amount of borrowing costs that will be capitalized during the period? The calculated interest in period shall not exceed the amount of borrowing costs it incurred during that period.
Is there any other functionality to support interest calculation and capitalization of borrowing costs to asset under construction according to IAS23 requirements?
Please advice.

Hi,
The interest rates for capitalization and for appropriation can be collected in separate cost centers and apportioned to WBS . If you incur interests at the group level,then using accrual apportion the relevant portion to the respective C/Codes.
For arriving the weighted average i assume you take the planned interest.For restricting the planned to the actual ones use the " Budget Manager" functionality,give the actual value,set zero tolerance.This will help restricting to the actuals.
Hope this helps.
Regards
Ramesh

Settlement of an Internal Order to Asset Under Construction

We are running SAP 4.7 and Iam trying to settle an Internal order to AUC and I get the following error
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 18000 (chart of depreciation SEEF). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
**Please take note that the costs which have come on the internal oder are through GR( Goods receipt) and not down payment. Also note that last month, the order settled without any problems!**

Hi,
thanks for your answer.
I want to do that because of some french tax rules.
These rules say that goods, hours or services produced internally for the contruction of an asset can be "delivered" to itself.
So you can register output tax based on the value produced but you have also to register input tax for the same amount.
Finally the balance for VAT amount is 0.
I was interested to know if that was possible to automize. If not, there is still the possibility to make a separate postings at month end or year end.
Best Regards

Capitalise/close/delete asset under construction with zero value

Similar Messages

Maybe you are looking for