Caps Lock key problem please help me

Sir
i want to check the caps lock key on or off
how can i do?
Please help me
Thanks in advance

Toolkit.getDefaultToolkit().getLockingKeyState(...);

Similar Messages

  • Caps lock key problem

    In Mack Book pro - the CAPS lock key will have to be kept pressed for a long time. There is no way to get rid of this. Any of you if you face this problem please let me know how to solve this.

    See this similar discussion: Is there a way to disable this behavior? It is amazingly annoying.

  • Lion - num lock and caps lock keys problem

    Since installing lion I have to have num lock key and caps lock key turned on to type normally (otherwise I get all numbers if num lock off, or all caps if cap lock off). It's like the keys' functions have been reversed. (2.16 GHz MacBook).
    Any help much appreciated.

    CHi Chubrock
    if you run Windows 8 and I guess you have backlit keyboard for your GT70 ONE, please try to download new firmware here, and give it a try, I guess the worng firmware installed in your system ,  please choose the firmware with backlit KB and install , good luck
    http://www.msi.com/product/nb/GT70-0NE.html#/?div=Firmware&nbos=win8

  • Caps Lock Key Problem or Feature?

    just wondering if this is a new feature on Penryn Macbooks, but if i hit the CAPS LOCK Key too fast it doesnt activate or turn on, if i hit it slower, like leave the finger on it a bit longer it does, is this the same for everyone?

    Anyone else confirm this? and also does anyone find it annoying?

  • Problem that starts with *apparent* sticking caps lock key

    I have a mid-2009 MacBook Pro (two weeks outside of AppleCare, of course!).  Last night, it appeared the caps lock key was sticking. It would type in all caps even when I hit the button and the green indicator light went off. Moments later, I noticed that the option that shows you all the windows on the same screen was suddenly going very, very slow. I tried to restart but it started in safe mode - twice. It finally started correctly on the third or fourth reboot. I hoped it was a fluke.
    Unfortunately it's happening again and rebooting doesn't seem to fix it - I can't put in my password to login because it thinks I'm typing in all caps.
    Any ideas, please?  Thanks.

    This may enter the Apple Hall of Fame for stupid posts.  I spent a couple hours last night restarting the computer, trying restore etc....and really doing anything I could from clinton's link in order to identify the problem.  I'd even called our local store to let them know I would be there first thing in the morning (I'm boarding a plane in a few minutes and really needed my laptop for this trip).
    So after doing all of those things + removing the caps lock key to see if it was somehow manually stuck, I go the store this morning.  Virtual panic.  I needed a presentation off the laptop for a workshop tomorrow and I hadn't backed up since I created it...
    I enter the store, I begin to explain the situation in detail, I open up the laptop....
    And the guy at the store says "Did you notice your shift key is stuck down?".  Why No, I hadn't noticed that!  With a tiny wiggle and a tap, that key popped back into place and the computer worked fine.  The Safe Mode was happening because the shift key was down.

  • I can't get a capital c when I press the shift key, but I can get one with the with the caps lock key.  Help

    I can't get a capital c when I press the shift key, but I can get one with the with the caps lock key.  Help

    Hi
    How its going?
    I understand that you are not able to get the capital letter c.
    I want you to change the keyboard and if you have got the warranty please replace at no charge.
    Chetan

  • Laptop freezes at HP logon screen, edit to post Caps lock key blinks 5 times

    Hi,
    This is an edit to my original post,
    I have also noticed the caps lock key blinks 5 times in fairly
    quick succession then there is about a second delay then
    it keeps repeating the same pattern,also the number
    lock key is also on
    Don`t no if this has any importance?
    Thanks again
    I hope I`m posting in the right place, please forgive me if I`m not
    I have a HP Probook 4535s  (now out of warranty)
    When I turn it on it freezes at the Hp start up screen
    It does`nt matter which "F" key I press after a few
    seconds it starts to beep (not in the identifying a
    problem way) This includes the "Esc" key
    Whatever key I have pressed it goes from just
    text to having a white box around the text
    but does nothing
    I have reseated the RAM and them replaced
    it I have also replaced the HDD, although it
    is maller than the original all with the
    same results, so am at a loss.
    Any help and guidence would be most appreciated
    Oh sorry I have also removed the battery and held
    down the power button to purge it
    Thank you in advance for reading my post
    Best regards
    Neil
    ps I have not got the recovery disks (lost when we moved)

    Sorry to hear that. Please refer to the Blank Screen LED Error Codes document from HP Support. It sounds like a "General system board failure." The explanation says to contact HP for assistance. The motherboard might need to be replaced, and you will probably require the assistance of a technician to fix the problem. 
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • How to activate the keyboard caps lock key?

    Hai,
    I am in a situation to activate the keyboard caps lock key
    through coding. I don't know how to solve this problem in
    solaris environment. If any knows please help me.
    Thanks in advance,
    Devarajan.

    Dear William Bill,
    Thanks for your reply,
    Ya, I have already configured the softkey template for Call back feature and tested the same.
    I am getting the call back notification if user is busy, but "Dial" softkey is not working wherein cancel and exit softkeys are working properly in call back notification ( i mean call back return message).
    Kindly help me here and thanks in advance.

  • Caps Lock Key not displayed when active on Key board for HP P7 1410

    How can I tell if my Caps Lock Key is active??

    Hello Again,
    If you click on the link below it shows you how to sync, and the instructions are pretty standard with other wireless devices we have. The little receiver that you have plugged into the computer might not have a button on it, but there should be a sync button on the bottom side of the keyboard.  
    Also after doing some research I was able to find out that less and less of our wireless keyboards are coming with the standard caps lock light. Also if the wording itself doesn't come up on the screen when you press the button and the keyboard is functioning as such then the keyboard doesn't provide that function.
    How To Sync
    Please respond at your earliest convenience.
    Thanks 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Black screen caps lock key blinks

    Laptop screen is blank and the caps lock key blinks 3 times over and over..Tried doing what was suggested, taking out and reinstalling the memory card..also blew out the dust and didn't fix the problem ..I think it's Windows 7 installed.

    Hi there @Philvasquez 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I am sorry to here that you are getting this particular error code and that your initial troubleshooting has not helped.
    I assume that you were looking through this page, and followed it.
    Computer does not start and the LEDs blink or the computer beeps
    LEDs blink 3 times
    Memory
    Module error not functional
    If you have followed the process within that page, related to a memory problem, and it is still doing the same thing, then you are looking at two possibilities. One or more of the memory modules in your notebook is defective, or the main board has a faulty connection.
    You can try testing the memory individually or by swapping them (if there  are two) into the different memory sockets. Doing this you can isolate if one memory chip or the other is defective, or if it is a socket problem.
    Once you know which problem it is , you will likely need to get replacement memory, or a replacement board, or in a worst case both.
    See the following, for more details on the compatible parts and type of memory that are supported.
    HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance an...
    2 customer-accessible/upgradable memory module slots
    Supports dual-channel memory 
    Supports up to 8192 GB of system RAM
    You could also try calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Elitebook9470 not turning on,scroll and cap lock keys light up

    I have an elitebook9470 which is about 2 years old. When I turn my laptop on the keys light up but the monitor remains blank. Then the scroll and caps lock keys light up however nothing appears on the monitor. I have charged my laptop and I am unsure if it is related to low power. I have tried attaching the laptop to an external monitor but no signal appears. Any help regarding this will be appreaciated. thanks for your help.
    Regards
    nush

    Hi @Nush 2015 ,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Even though this is a Commercial product, try performing a hard reset.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Here is a link on computer does not start.
    You could reset the BIOS with this document selecting the reloading the BIOS default settings.
    Hope this helps you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Satelite P50-A-14E - Caps lock key is not working

    Hi all,
    My CAPS LOCK key is not working on my Satelite P50-A-14E series laptop. Just realized while writing an email that is not working so is more or less sudden. Nothing has been spilled on it. Here is what I've checked so far:
    - green light indicating that CAPS is LOCKED illuminates while pressing the key from on screen keyboard
    - keyboard backlight doesn't start when I press the key but It works for the key itself when pressing any other key.
    - tried a clean boot but no result.
    Thanks a lot for your help.

    Hi
    > Just realized while writing an email that is not working so is more or less sudden.
    Did you test the CAPS LOCK button using different software: internet browser, word or another editor?
    How about the usage of external keyboard?
    From my point of view there are two possible malfunctions: either there is some problem with the software you are using or the internal keyboard simply malfunctions and in such case the keyboard replacement will solve the problem.
    You could test the external USB keyboard. In case the USB external keyboard CAPS LOCK button would functions, then the internal keyboard has to be replaced for sure.

  • Trackpad and caps lock key

    The trackpad on my macbook has stopped working, as has the click button. i am having to use a usb mouse. Also the Caps lock key has reversed itself, when the light is on, Caps lock is off. The light is on as I am typing this. THE LIGHT IS OFF NOW. Any help on how I can get either fixed?
    (macbook, snow leopard)

    First, try resetting the SMC:
    http://support.apple.com/kb/HT3964
    Second, remove the battery and then start up just from AC power. Does your trackpad work without the battery installed? If so, you may be one of the many whose battery seems to have warped out of shape.
    If even without the battery installed your trackpad doesn't work, google up +macbook trackpad origami+, which will suggest a trick to deal with the opposite problem, that there's too little space between the trackpad and the battery.

  • Yoga 13 Caps Lock key

    Anyone know of a way to disable the caps lock key on the Yoga 13? I'm forever hitting it by mistake...
    Solved!
    Go to Solution.

    Hi Grumpguts,
    Welcome to the forum,
    please try to below steps :
    1. Press Windows+C to open the Windows Charm Screen-> Go to Search to open the Apps Search Field.
        Now, just type regedit.exe in the search field.
    2. You will find an option on the left side of the registry editor calledHKEY_LOCAL_MACHINE. Expand it.
    3. Go to SYSTEM and expand it.
    4. Choose CONTROL and expand it
    5. Choose KeyBoard Layout and expand it.
    6. In the right side of the screen Right click-> Go to New-> Select Binary Value.
    7. Name it Scancode Map.
    8. Double click on it and write the value 00000000 00000000 02000000 00003A00 00000000 and press OK.
    9. Close the Registry Editor and Reboot.
    hope the information helps
    Regards,
    Ayman

  • HP Dv6z-7200 Notebook blinking caps lock key, red wifi button

    I re-did the thermal paste on my computer (Dv6z-7200, AMD A10-4600m, Radeon 7670m, 6Gb RAM ) and i put it back together, and the screen does not come on, the power button lights up, the wifi key is red and then the caps lock key blinks indefinetly, and the fan comes on. Lucky for me my buddy has the same laptop so I took out the motherboard on mine and put it in his' with his' hard drive, RAM, wlan, etc. and it still didn't work. So it must be the motherboard, right? Could it be something with the BIOS? If it is the motherboard that is fried, could someone direct me to where i can get a new one? I tried the hp part surfer website, but could not find it. Thank you -Zach

    Hi Nayj424,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Compaq Presario CQ62-102TX Notebook and getting a blank or black screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Problem: oad.log file empty.

    I have installed ias9i (1.0.2.2) on AIX cluster (4 cards). Installation went successfuly. Discoverer proceses started but I can't log into discoverer viwer. The message is: "Unable to bind oad" So I followed all advaices published on metalink: 1. Nsl

  • Removing email address from auto populate box in ICal invites

    I deleted a contact/email address from my address book but his name/email still shows up in ical as choice for invites. His address is not in my mail's "previous recipients" list and is removed from contacts. How do I stop it from being a choice to p

  • Web page displays much too small

    I'm trying to develop a web page to display on the Pre, but no matter what I set the size of the page to it shows up very small on the Pre. Here's the raw html. Changing the font size to large didn't seem to change anything. No matter what it shows u

  • Filter in web dynpro ALV grid error

    The filter in the ALV web dynpro seems to work like *<condition>*. let's say if you have 4 entries in the table 30,230,300,1230 applying the filter value '30' will select all of them making the filter function virtually useless. Is there a way to cha

  • Question regarding scripts

    Hi, I have scripts for Address Book. In which file should I put them in order to see those scripts in my applescript menu? Thanks a lot. Manuel.