Captivate 5.5 Review message no longer wraps in Review area caption box

Has anyone else experienced this issue? I logged it as a bug when someone else in my company reported the same issue to me. I searched for it on the Internet and didn't get any hits. We tested to see if it was just for converted projects from 4 to 5.5 or for new ones as well. It's not working for new ones. This problem did not exist in version 5.
Basically the text won't wrap so the text displays completely across the screen (no matter what size the Review Area caption size is), cutting off the text at both ends for longer feedback messages.
Workaround: You can work around this issue by forcing a carriage return in your feedback messages by pressing Enter at an appropriate place in the message. You'll probably have to fool around with that a bit to determine the best place.

So, here is my workaround:
On the Quiz Review slide, I created two captions, one for passing, and one for failing. I set both of them to be hidden. I then created a conditional Advanced Action called ExamCaption and set one expression to show the Pass Caption if cpQuizInfoPointsscored was above or at my passmark, and set another expression to show the Fail Caption if cpQuizInfoPointsscored was below my pass mark. I also set each expression to hide the other non applicable caption for good measure.
I set the On Enter action to ExamCaption for this slide.
Reading Lilybiri's blog, I also replaced the Captivate Pass/Failure captions with just a space for each, so that nothing is shown.
Only problem is, the captions fade out after 3 seconds, the duration of the slide, despite being set to No Transition. I therefore increased the length of the slide to 60 seconds. If anyone has a better workaround, please let me know.
Hope that helps!

Similar Messages

Quiz Review Message

I am new to Captivate and I'm having trouble with my non
graded quiz inside my program. I can't get the review message for
the remediation if the answer was wrong to come up. I have know way
of knowing if I'm setting it up wrong or if there is a glitch in my
program. I found the tab for feedback like "Try Again" but I need a
larger space to put the information that contained the correct
answer. Can someone please run down the steps to making this work?
Thanks!

In a survey question, (Captivate 3) there is an advanced
option for answer choices that allows you to check 'show feedback
message'. I believe this would allow you to provide as much
feedback as you wanted - and then the user can continue on to the
next question/section.
I'm sure there are other ways to do this as well- it seems
Captivate always has about 4 ways to do 1 thing.

Multiple reviewers cannot open CREV files in Adobe Captivate Reviewer 1.0 after the first review

We are using Captivate 4.0 with Captivate Reviewer 1.0 for review and comments. The problem we are having just started within the last month...
We place the CREV file and folder on the network so that multiple reviewers can access. All have Adobe Captivate Reviewer 1.0 installed.
When the first person opens the CREV file, they are told that the folder is already in use, and that they must create another.
Once a new folder is created a user may open the CREV file and make comments and save them. However, subsequent reviewers cannot open the CREV file to add their comments. Subsequent reviewes must create anothe folder and then they can open and review the file and add comments.
However, because the CREV file is now saving comments in a different folder, reviewers cannot see each others comments. The last module we did where everthing worked correctly and multiple reviewers could open and comment the same file without any issues was about one month ago on 07/29. We have no idea if something has changed since then that would render Captivate Reviewer 1.0 inoperable, but we'd like to see if anyone else has seen and/or resolved this issue...
Thanks,
James

No, I've had WIndows 7 since it was released through MSDN. Adobe Captivate 4, released in January 2009, was the most recent version of Captivate available when Windows 7 was released to MSDN and Technet subscribers in August 2009. Captivate 5 was not released until May 2010, almost 9 months after Windows 7 was released to the public.
Captivate 4 has a message at startup mentioning that one should run it as administrator, which is a Windows 7 feature involving User Account Control. We bought it sometime after Windows 7 was released but before Captivate 5 was released, otherwise we would have bought Captivate 5.
Captivate 4 has worked for us on Windows Server 2008, Windows 7, Windows Vista, and Windows XP. For it to work on Windows Vista and up, we had to make sure a particular update was applied.
The problem is that it works when it feels like it, and the rest of the time it just freezes at startup. Deleting the app data folder seemed to help, so perhaps it had issues with state corruption. These issues have plagued this application from day 1 on every OS we've used it on.

Sun java convergence error - Message no longer exist

Hi
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:44:36, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (not compiled)
SunOS 5.10 Generic_141445-09 i86pc i386 i86pc
We moved mailboxes from one server to another. After that we have problems with some accounts. Users see their messages in Sun Java Convergence but can't open and read it. Error appears: Message no longer exist. We tried reconstruct command but it didnt helped.
Thanks in advance

luk4s1984 wrote:
Did you also transfer across the mboxlist database? Were both the source/destination Messaging Server instances down when you performed the move?I didn't move mboxlist database and bouth source and destination instances were up.This method of migrating mailboxes is bound to cause problems. Why did you choose to use this method rather then use the rehostuser command?
Did you change the users mailhost: parameter?I didn't changed mailhost.Do both the source and destination systems have the same hostname?
What exact reconstruct command(s) did you run?reconstruct -aIf you run "reconstruct -r user/<uid>" for one of the accounts reporting problems, are any errors reported?
Check the imap and http log files when the error occurs -- do you see any errors?There is no errors in imap and http logs.Interesting. Which emails return "message no longer exists"?
Newly delivered (unread) emails, emails delivery prior to migration, emails delivered after migration or some combination of all three?
Regards,
Shane.

Messages no longer working on Macbook Air

since the latest software update on my Macbook Air my messages no longer functions. No incoming messages even when they are there on my iPhone. Jabber showed up and i disabled that and ensured imessage account was enabled.

Hello sirrobert,
Thank you for using Apple Support Communities.
For more information, take a look at:
Messages (Mavericks): Set up your accounts
http://support.apple.com/kb/PH15055?viewlocale=en_US
Messages (Mountain Lion): Fix iMessage issues
http://support.apple.com/kb/PH12065
Have a nice day,
Mario

IPad messages no longer works after ios7 upgrade

After upgrading to ios7 on my iPad messages no longer works.
After I enter To: I am unable to get to the message field to enter the message.
Reboot does not solve the issue,

This issue has been resolved!

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Webmail - Message no longer exists

We are experiencing a problem that users of the Webclient experience the error:
"Message no longer exists" the message however does exist en with a refresh can be viewed normally.
As such we gather that this error means "Message does not exist yet" or something similar instead.
It happens to a wide variety of users using a variety of browsers.
We currently use:
$ /webmail/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:05:22, Oct 12 2007; 32bit)
Linux ripley 2.6.9-67.0.1.ELsmp #1 SMP Fri Nov 30 11:57:43 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
Any thoughts/suggestions are more than welcome.

Sorry to raise this issue again, but I am now experiencing the same issue.
We run:
imsimta version
Sun Java(tm) System Messaging Server 7.0-3.01 64bit (built Dec 9 2008)
libimta.so 7.0-3.01 64bit (built 09:24:13, Dec 9 2008)
Using /opt/sun/comms/messaging64/config/imta.cnf
SunOS mailstore-sby1.its.utas.edu.au 5.10 Generic_138889-06 i86pc i386 i86pc
and Communications Express:
showrev -p | grep SUNWuwc
Patch: 122794-24 Obsoletes: 118541-43, 117288-99, 117820-13, 119157-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Patch: 122794-28 Obsoletes: 118541-43, 117288-99, 117820-13, 119157-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
I note that the patches referenced in this thread relate to much earlier versions of MS (6.3), so I would have expected these patches to be incorporated in 7.0.
We can reproduce this problem in the following way:
From Comms Express:
Select "Address Book" - search for an address - select the address to bring up the "compose" window.
Enter subject
Enter body of message
Select "attach" and attach a file to the message.
Select "Save Draft" a couple of times.
Sometimes, selecting "Save Draft" will bring up the dialogue box with "Message no longer exists" after a couple of times.
When selecting "Send", a dialogue box with "Message no longer exists" will appear.
The only way to overcome this problem once it has arisen seems to be to logout/login to comms express.
If I perform this procedure without first going into "Address Book", the problem does not seem to exist.
Any suggestions?
Dave.

Why is Messages no longer showing up under my iCloud account in the "Internet Accounts" window?

Why is Messages no longer showing up under my iCloud account in the "Internet Accounts" window? I recently deleted it and added it back, but then Messages went away. On my iPhone, it shows me logged in under my iCloud account and my cell phone number is synced with that iCloud account. Yet, on my Mac it isn't showing up.
I've already tried removing and adding the iCloud back several times.

The Messages app is supposed to grab the information from the "Internet Accounts." Messages has always included the ability to separately add Google, Yahoo, AOL, or other messages accounts; but, it has always grabbed the iCloud account information from the "Internet Accounts" section. Except for now, when the Messages option has disappeared from the iCloud account under "Internet Accounts."

TS2755 Messages no longer works with iOS 6.

Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att take techline 15 minutes and imessage and text messages working ok

Error when starting managed server Message Too Long

          Hi,
          I'm trying to setup clustering with WLS6.1sp2.
          I use the jdk include with wls
          2 servers in the cluster OS=AIX
          1 Adminserver running on Solaris 8
          When I start a managed server on one of the clustered machines
          I see the following error.
          Starting Cluster Service ....
          <Mar 20, 2002 10:38:38 AM CET> <Notice> <WebLogicServer> <ListenThread listening
          on port 7001, ip address 10.160.3.74>
          <Mar 20, 2002 10:38:39 AM CET> <Error> <Cluster> <Error sending multicast message:
          java.io.IOException: Message too long
          java.io.IOException: Message too long
          at java.net.PlainDatagramSocketImpl.send(Native Method)
          at java.net.PlainDatagramSocketImpl.send(PlainDatagramSocketImpl.java:77)
          at java.net.DatagramSocket.send(DatagramSocket.java:341)
          at weblogic.cluster.FragmentSocket.sendThrottled(FragmentSocket.java:133)
          at weblogic.cluster.FragmentSocket.send(FragmentSocket.java:91)
          at weblogic.cluster.MulticastSender.fragmentAndSend(MulticastSender.java(Compiled
          Code))
          at weblogic.cluster.MulticastSender.send(MulticastSender.java:149)
          at weblogic.cluster.AnnouncementManager.sendAnnouncement(AnnouncementManager.java:140)
          at weblogic.cluster.AnnouncementManager.startX(AnnouncementManager.java:91)
          at weblogic.cluster.AnnouncementManager.start(AnnouncementManager.java:51)
          at weblogic.cluster.ClusterService.startCommunication(ClusterService.java:192)
          at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:540)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
          at weblogic.Server.main(Server.java:35)
          >
          <Mar 20, 2002 10:38:39 AM CET> <Notice> <Cluster> <Listening for multicast messages
          (cluster wlsHomebankingCluster) on port 7001 at address 237.200.200.1>
          <Mar 20, 2002 10:38:39 AM CET> <Notice> <WebLogicServer> <Started WebLogic Managed
          Server "s01ap007" for domain "axa" running in Production Mode>
          Also deploying doesn't seem to succeed could this be coused by this error
          I hope someone can help me.
          Best regards,
          Peter Van der Goten


          Because I found the answer via Mr. yunyee who also had this problem on an AIX machine
          I will post this also here.
          The problem was that the upd_sendspace variable was set on
          a mutch to low value (9126) or something in this range
          It had to be set on 32769.
          this was done with no -o udp_sendspace=32769
          Best regards,
          Peter
          "Peter Van der Goten" <[email protected]> wrote:
          >
          >Hi,
          >I'm trying to setup clustering with WLS6.1sp2.
          >I use the jdk include with wls
          >2 servers in the cluster OS=AIX
          >1 Adminserver running on Solaris 8
          >
          >When I start a managed server on one of the clustered machines
          >I see the following error.
          >Starting Cluster Service ....
          ><Mar 20, 2002 10:38:38 AM CET> <Notice> <WebLogicServer> <ListenThread
          >listening
          >on port 7001, ip address 10.160.3.74>
          ><Mar 20, 2002 10:38:39 AM CET> <Error> <Cluster> <Error sending multicast
          >message:
          >java.io.IOException: Message too long
          >java.io.IOException: Message too long
          > at java.net.PlainDatagramSocketImpl.send(Native Method)
          > at java.net.PlainDatagramSocketImpl.send(PlainDatagramSocketImpl.java:77)
          > at java.net.DatagramSocket.send(DatagramSocket.java:341)
          > at weblogic.cluster.FragmentSocket.sendThrottled(FragmentSocket.java:133)
          > at weblogic.cluster.FragmentSocket.send(FragmentSocket.java:91)
          > at weblogic.cluster.MulticastSender.fragmentAndSend(MulticastSender.java(Compiled
          >Code))
          > at weblogic.cluster.MulticastSender.send(MulticastSender.java:149)
          > at weblogic.cluster.AnnouncementManager.sendAnnouncement(AnnouncementManager.java:140)
          > at weblogic.cluster.AnnouncementManager.startX(AnnouncementManager.java:91)
          > at weblogic.cluster.AnnouncementManager.start(AnnouncementManager.java:51)
          > at weblogic.cluster.ClusterService.startCommunication(ClusterService.java:192)
          > at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:540)
          > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:203)
          > at weblogic.Server.main(Server.java:35)
          >>
          ><Mar 20, 2002 10:38:39 AM CET> <Notice> <Cluster> <Listening for multicast
          >messages
          >(cluster wlsHomebankingCluster) on port 7001 at address 237.200.200.1>
          ><Mar 20, 2002 10:38:39 AM CET> <Notice> <WebLogicServer> <Started WebLogic
          >Managed
          >Server "s01ap007" for domain "axa" running in Production Mode>
          >
          >Also deploying doesn't seem to succeed could this be coused by this error
          >
          >I hope someone can help me.
          >Best regards,
          >Peter Van der Goten
          >

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". Has anyone else seen this?

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?

The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

Do you have a license for InDesign?

Does Adobe Send allow you to select how many days your files can be downloaded - as with Adobe Send Now? Also, why don't I see the virus scanning message any longer with "Send" versus "Send Now"?

Does Adobe Send allow you to select how many days your files can be downloaded - as with Adobe Send Now? Also, why don't I see the virus scanning message any longer with "Send" versus "Send Now"?

We relied upon the "days available for download" to get people to take
action more quickly. The "virus scanning" progress bar was simply another
way of knowing this activity was actually taking place - unless this is
written somewhere in the Adobe Send User Guide.....wherever that is.
On Tue, Dec 2, 2014 at 12:09 PM, bob.treitman <[email protected]>

Captivate 5.5 Review message no longer wraps in Review area caption box

Similar Messages

Maybe you are looking for