Captivate 8 - Issue with interactions when publishing to html5

Has anyone else had difficulty with the built-in learning interactions when publishing to html5? Are they incompatible? We've had a few hiccups with things as we do all publishing to html5 and there seem to be some disconnects.

Thanks Shriyansh. I've emailed you with a link to download the project along with the following additional details:
Browsers I'm testing for compatability (all are up-to-date as far as I know):
- Also, the slides that were repeating yesterday aren't repeating today
Chrome 38.0.2125.104 m
Internet Explorer 11.0.9600.17358
Safari for Windows 5.1.7
Firefox 33.0 (Captivate says Firefox doesn't support the content so I'm not expecting a solution for FF, however, firefox repeats the first slide very consistently)
Publish settings (pretty much the defaults):

Similar Messages

No audio in accordion interaction after publishing as HTML5 in Captivate 7

Hi guys,
we have a problem with the accordion interaction in Captivate 7. After publishing it as an HTML5 project the audio (mp3) doesn't play on the accordion interaction slide. The interaction itself looks great and clean, and the audio plays fine in .swf and preview, but it doesn't play when published as HTML5.
Any suggestions? Do you need more info? Let me know.
Thanks so much again,
Nat

Add the file to your Captivate install directory Gallery > Interactions folder. (Make a backup copy of the original file in case you need it later.)
E.g. C:\Program Files\Adobe\Adobe Captivate 6 x64\Gallery\Interactions
Make a note of the name of the interaction. Then open a new Captivate project and from the Insert menu, select Interactions.
Find the interaction in the screen and insert it into the slide.
Then configure the interaction, publish and test.

Close window not working when publishing as HTML5 on Adobe Connect using CP8

Hi all,
I'm trying to get a button that closes the project/window at the end of a video. I am using CP8.
I can get it to work when publishing as SWF to Adobe Captivate.
It also works when publishing as HTML5 but not on an LMS (Adobe Connect).
I have tried various methods including
- On success execute a Javascript = window.close()
- On success - exit
- On success execute advanced action = Assign cpCmdExit with 1
I also tried adjusting the slide settings On Exit: exit and the publishing settings Project End Options: Action: Close project.
Nothing works.
Any ideas?
Many thanks,
Aimee

Hi Aimee,
Can you test this to close the course window:
Insert 2 buttons or smart shape used as buttons (as Finish course buttons).
On the first button apply an action to execute javascript and in the script window, use this script: parent.close()
On the second button apply an action to execute javascript and in the script window, use this script: top.window.close()
Upload the published project on your LMS and check if any of these works for you.
Thanks
Himanshu

Audio not working on one slide when publishing to HTML5

I'm in Captivate 8. In one slide in my project no slide audio will play when published to html5. I've tested in Chrome and IE 11. In Chrome, I see the 'speaker' icon that appears when audio or video is running but no sound comes up. (The speaker appears for the length of the audio file ~5 sec) All other slides are fine, and the slide audio plays correctly if I use F3 or F10 to preview the slide inside Captivate.
The slide in question is a 'menu' only reached via an advanced action. I know the advanced action is not the culprit - if I change it to jump to a different slide, the audio on that slide plays without problem.
Similarly, I've verified that if I place this audio file on a different slide, it plays fine, but if I add a different audio file to this slide the problem remains. If I create a button on the problem slide to trigger the audio it plays, (but is unhelpful since I want the audio to play automatically when the user enters the slide).
I've tried removing/re-adding the audio, recreating the slide from a copy, setting the audio to play via an "on enter" advanced action, and adding a play trigger to the advanced action that jumps to this slide. Nothing I've tried gets the audio to play.
I'd welcome any suggestions of what might be happening or how to fix this.
Thank you,
Jenny Nilsson

Hi Lieve,
Thank you, yes, if I view using f12 the audio works correctly.
The "exitBranch" action is associated with a continue button at the end of each branch. If all branches have been visited, it jumps to a new slide, if there are unvisited branches, it jumps back to the menu slide where the audio is not working. (If I edit the action to jump somewhere else the audio will work for the different slide.)
The action was created from a shared action and my colleague and I have used it in multiple other modules without this error.
Thanks,
Jenny N

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

Issue with services being published in SR

Hi Experts,
We have an issue with services being published in SR
1. Service is created and published from ECC to Service registry
2. End points are created in Soa manager
But the service state is shown as u2018Modelledu2019 instead of u2018Configured u2019 in SR
Thanks,
Sowmya.

Hi Sowmya,
If you want it to appear in the SR as 'Configured', change your procedure to as follows:
- Create Service in ECC
- Configure endpoints in SOAMANAGER
- Then Publish Endpoint binding URL (as it appears in SOAMANAGER) in SR. You can do this Publishing in SOAMANAGER as well. The idea to configure the endpoint before publishing to get the 'Configured' state.
Some additional reading:
[http://help.sap.com/saphelp_nw73/helpdata/en/47/d38f14b8fc3c83e10000000a42189c/content.htm]
Regards, Trevor
Edited by: Trevor Naidoo on Jun 24, 2011 12:48 PM

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.

Drag and drop interactivity- do it for me button not working when published to HTML5

I've made a drag & drop interactivity, I am adding a button where the user can get the correct answers for that interactivity.
using advance actions / Standard action / and apply custom effect (right to left ease) in captivate 7.
The problem I'm experiencing is that the button works fine when reviewing as SWF but when I publish as HTML5, it is not running.
I am attaching screen shots for it.
Thanks,

Sorry advance actions screen as below:
The idea when user click on "do it for me" button, drag source move to drop target automatically.
Thanks

Captivate 7 Screen Captures (scrolling) not showing when published in HTML5

I am using Captivate 7 and when I publish in HTML5 my screen captures (of the screen scrolling) do not show -- I get a blank screen for a couple of seconds --, even though they show when I preview for the Web in HTML5. They also show when I play them locally, but not from my server. Here is a link to a short video that has this problem -- click the fast forward button seven times after clicking play to get to a screen scroll. http://streaming.missioncollege.org/library/media/Tutorials/Title/index.html

I was using Internet Explorer 9. This morning I tried 10 & 11 with the same results. It works fine in Chrome and on a Mac with Safari. I do not have my iPad with me today, but I tried it this weekend and had the same problem, though I just updated my OS, so I will try again. If it does not work well on an iPad then I might as well output as FLASH. I will try my iPad again tonight and report back tomorrow. Thanks.

Captivate 8 browser issue with HTML 5 published course

Hi, I'm troubleshoot a new issue. I have published a responsive course in HTML 5 and posted it to our LMS. The course played fine last week in Chrome but now seems to have a few issues. I wanted to know if anyone had any ideas if it's a browser compatibility issue or possible more to-do with the course publish settings. The course doesn't automatically play anymore. I have to click play on the playbar to start the course, the videos are slower, and the click boxes are not clickable.
Any ideas?

You may want to check out Jim's solution here.
http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
Sreekanth

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Issue with Backflush when Consuming Fractions

I am having an issue with back-flushing I was hoping Guru's could help me .
Here is the issue:
In the BOM for every 1 EA of X(Parent) we need .025 EA of Y(Child)
The parent part is X. Using CS03 and typing in a quantity of 20 pcs everything looks perfect. I would consume component Y .500 of a sheet.
If you review MFBF for 20 pcs. of X it wants to consume 1.00 of Y. (1 whole sheet instead of .5)
I know I could put a rounding value of 40 on the X to fix this but that would not be an option for this particular process. Measurements of each of these is not exactly the same and very critical.
Is there an issue with SAP consuming fractions? It seems to round up to 1 whole sheet when it should only consume .500 of a sheet. Do you know of a way to fix this?
Any info would be greatly appreciated
Thanks,
Safi

For some reason which is unknown for me, this topic is very hard to manage within SAP.
We face exactly the same issue producing Tanks from steel sheets.
Base Unit of Measure was EA for Sheets . SO, we create a copy of EA called ED (each with decimals) , allowing up to three decimals and assign it as an alternate UoM to the material. In Bom, we had, for instance, 3.6 ED to produce a tank.
But, in reservations the quantities are stored as Base Unit of measure and without decimals, regardless the fact that you a have an alternative UoM , etc etc.
So, if you consume the component based on MIGO and reservations, SAP will propose 4 EA (o 4 ED ! which is even stranger - because of double conversion between base and alternative UoM) . If you consume by backflush, you dont even realise that the GI is being carried out in that way.
We are still waiting for some solution after we sent a message, describing the issue. It is advisable to search the SAP Notes to see if there is some solution .
So far, alternative UoM is not the solution.
You must change the base unit of measure to ED or have some manual procedure of checking the quantities.
Of course, EA can be redefined with decimal parts, also, but this normally can lead to some other problems (other parts managed striclty in EA, i. e. a tank, could be managed in fractions, 0.75 of a tank !!! etc. )

Issues with Images when used w/ Caption Widget & Book File Size Q

Hi Everyone,
I was having issues with images not showing up and determined it was the caption widget causing the issue. I now have one of two issues happening consistently. Either the image does not show at all or just the caption box with bkgd gray and caption text shows, but without the image.
Anyone else have this issue?
Ay ideas would be greatly appreciated. I wasw just about finished with this project when this started!
Also, the size of the book is considerably larger than I realized.It is 81 mb. . . How does this compare to any of your books?
THANKS SO MUCH!
Belinda

Belinda,
I can't speak to your main issue, as I cannot recreate the problem over here.
As a guess, have you checked to make sure you're not running out of harddrive space? iBA can consume space quickly, and behaves oddly when it begins to run out of room.
But as far as filesize goes, I can only wish for an 81 MB book. Mine is currently a little over 2 GB and growing. Tonight I had to split it into 2 volumes just so iBooks Author can run at a reasonable pace. I was getting tired of waiting 1-2 minutes after dragging a video around on the page before I could get control of the program again.
You should note that Apple is expecting large filesizes for this new Multi-Touch format. The docs on iTunesConnect say the largest allowed upload size for a book is 16GB 2BG (see link below)
Message was edited by: mudmas

Issue with memory when trying to do a restore on iPad 2

I'm had a few issues with my iPad and am trying to do a restore, I start OK but then after a while I get a "can not be restore. The disk you are attempting to use is full" the PC I am using does not have a large C drive and space is limited but I do have a large external drive attached with loads of space. Is there any method of using the external hard drive when restoring?
I hope this makes sence, iPad now been down for over a week and issues getting me down.

The restore must be done within iTunes on your PC while iTunes is running so - No - you cannot restore using the external drive. You might try moving some of the stuff on your C drive to the external drive to free up space and then restore your iPad.

Error message - Captivate has stopped working - when publishing to MP4

I get and error message that Captivate has stopped working when I try to publish to an MP4. I am using Captivate 6. How do I solve this problem?

Hi Shivers,
What is the Exact version of Captivate you are using (Go to Help > About Adobe Captivate) ?
Please try to clear the cache of Captivate ( Go to Edit > Prefrences > General Settings)
See Screenshot
Please clear cache from computer as well..
Go to Start>Run>Type %temp% and then click on ok
Delete all the files from that folder(Some of the files which are in used will not get deleted , Ignore them)
Then try to Run as Admin and check if this works
Thanks and Regards
Himanshu Satija

Captivate 8 - Issue with interactions when publishing to html5

Similar Messages

Maybe you are looking for