Capture context change without using UDF
Hi,
I need to find context change of a field without using UDF.
I know we can do it in an UDF by comparing with ResultList.CC.
But do we have any graphical constant that notifies a context change?
regards,
Piyush
Hi,
There is no graphical constant by which you can identify a context change without using UDF. However, if you leave the context of the field at the level of the immediate parent and map accordingly, you can handle the contexts directly in your GUI mapping. This however would also depend on your mapping requirements.
Regards,
Shiladitya
Similar Messages
-
Mapping query for context change without UDF
Hi,
My requirement is as below:
Input queues are
4319, 4319,4320,4321,4321
M1,M1,M1,M2,M2,M2
Required output is
4319,4320,CC,4321
COntext change is to be inserted when there is a change in value in second queue.
regards, Anirudh.Hi,
Have you tried using the formatByExample as specified?
input1-->removeContext--> concat --> splitByValue:ValueChanged --> collapseContext --> substring (2..6) --> formatByExample (1) --> Target
input2-->removeContext--> /
input1-->removeContext--> concat --> splitByValue:ValueChanged --> collapseContext --> substring (0..2) --> splitByValue:ValueChanged -->formatByExample (2)
input2-->removeContext--> /
code explanation
input1 and input 2 when concatted outputs M12319,M12319,M12320,M22321,M22321,M22321
The upper part of the code does this: M12319,M12320,M22321, when you use the substring it outputs now 2319,2320,2321
The lower part of the code does this: M12319,M12320,M22321, when you use the substring it outputs
M1,M1,M2, then you use splitByValue. The output is now M1,M1,CC,M2.
When you input the code from the upper part and lower part into a formatByExample node, the output becomes
2319,2320,CC,2321
Hope this helps, -
Capture who changed data using Forms Personalization & changed to what data
Dear All,
When the data is changed to a new data (say the price has been changed), I need to capture
a) the original data
b) newly changed data
c) who changed the data
into a newly created custom table using FORMS PERSONALIZATION.
How do I do using FORMS PERSONALIZATION?
Thanks.
MatthewHey guys, I did it.... and it does work. Here is what I did.
I created a table to capture the required data.
CREATE TABLE XYKA_PRICE_CHANGE_DTLS
LIST_LINE_ID NUMBER,
PRODUCT_ID VARCHAR2(240),
PRODUCT_ATTR_VAL_DISP VARCHAR2(4000),
NEW_PRICE NUMBER,
DIV_NAME VARCHAR2(240),
PRICE_CHANGED_BY VARCHAR2(6),
PRICE_CHANGED_TIME DATE,
OLD_PRICE NUMBER
Create two procedures which needs to enter data into this XYKA_PRICE_CHANGE_DTLS table. We will pass values from FORMS PERSONALIZATION by calling this
procedure in the ACTION tab.
CREATE OR REPLACE procedure PRICE_CHANGE_DETAILS(price IN number,updated_by IN varchar2,disp IN varchar2,prod_id IN varchar2,line_id IN number,head_id in number,old_price in number) AS
v_name varchar2(240);
BEGIN
select name into v_name from qp_secu_list_headers_v where list_header_id = head_id;
insert into XYKA_PRICE_CHANGE_DTLS(NEW_PRICE, PRICE_CHANGED_BY,ITEM_NUMBER,PRICE_CHANGED_TIME,PRODUCT_ID,LIST_LINE_ID,PRICE_LIST_NAME,OLD_PRICE) values (price,updated_by,disp,sysdate,prod_id,line_id,v_name,old_price);
COMMIT;
END;
CREATE OR REPLACE procedure APPS.PRICE_CHANGE_DTLS(price IN number,updated_by IN varchar2,disp IN varchar2,prod_id IN varchar2,line_id IN number,head_id in number,old_price in number) AS
V_PRICE_CHANGED_TIME date;
V_PRODUCT_ID varchar2(240);
V_LIST_LINE_ID number;
V_count number := 0;
BEGIN
select count(*) into v_count from XYKA_PRICE_CHANGE_DTLS
WHERE LIST_LINE_ID = line_id AND PRODUCT_ID = prod_id AND NEW_PRICE = price;
if nvl(v_count,0) = 0 THEN
PRICE_CHANGE_DETAILS(price,updated_by,disp,prod_id,line_id,head_id,old_price);
else
null;
end if;
END;
In fact, I want to capture the current price and the changed price in pricing which is OPERAND field in qp_list_lines_v table (OM MANAGER > PRICING > PRICE
LISTS > PRICE LIST SETUP)
In the FORM PERSONALIZATION, enter the seq and the description
Seq 1
Description GLOBAL_VARIABLE
Level Function
In the CONDITION tab
Trigger Event WHEN-NEW-ITEM-INSTANCE
Trigger Object LIST_LINES.OPERAND
Processing Mode Not in Enter-Query Mode
Level Site
In the ACTION tab
Seq 1
Type Property
Description Operand Value
Language All
Object Type Global Variable
Target Object XX_EXIST_OPERAND_VALUE
PropertyName VALUE
Value ${item.list_lines.operand.value}
Seq 2
Type Property
Description USER
Language All
Object Type Global Variable
Target Object XX_USER_ID
PropertyName VALUE
Value =fnd_global.user_id
Seq 2
Description CONDITION & PASSING PARAMETER
Level Function
In the CONDITION tab
Trigger Event WHEN-VALIDATE-RECORD
Trigger Object LIST_LINES
Condition ${item.list_lines.operand.value} <>${global.XX_EXIST_OPERAND_VALUE.value}
Processing Mode Not in Enter-Query Mode
Level Site
In the ACTION tab
Seq 1
Type Builtin
Description PASSING_VALUE
Language All
Builtin Type Exceute a Procedure
Argument ='begin PRICE_CHANGE_DTLS('''||${item.list_lines.operand.value}||''','''||${global.XX_USER_ID.value}
||''','''||${item.list_lines.product_attr_val_disp.value}||''','''||${item.list_lines.product_id.value}
||''','''||${item.list_lines.list_line_id.value}
||''','''||${item.list_lines.list_header_id.value}||''','''||${global.XX_EXIST_OPERAND_VALUE.value}
||''');end'
Click APPLY NOW button. Save it and the close this FORMS PERSONALIZATION. Go back to the navigation and then click on the module. Try changing the price.
Your current and the newly changed price along with who changed it, time etc will be inserted into XYKA_PRICE_CHANGE_DTLS table.
Edited by: e-brain on Sep 14, 2009 11:21 AM
Edited by: e-brain -
Business area in FI changing without using substitutions
Hi all,
Is it possible to change the business area when we post a clearing document?
For example, we need to pay the line item that have business area 3000. Then we use transaction F110 to create a payment then a clearing docuement will be created with business area 3000. Can we configure it to change to Business area 1000 when we do the payment.
I tried to implement a FI substitution but Business area field cannot be changed(OSS Note 42615). we can do that by changing standard program but it is not recommended by SAP.
Any idea on how to do this? Configuration, BTE or any user exits? Point will be rewarded for any helpful answer.
Thanks,
ChaiphonHi,
Post in Expert Forums » SAP Solutions » ERP Financials forum too, they may help you.
Regards,
Satya -
Making a configuration change without using admin console
I am using the Platform Edition of App Server 7 so I don't have access to the web-based admin console.
I need to make a configuration change and the only directions I have are for the admin console.
Can anybody give me some pointers on what file to edit to acomplish the procedure below?
8. Log in to the Sun ONE Application Server administration console.
9. Select the application server Instance on which you installed the Identity Server.
10. Click JVM Settings and then JVM Options.
11. In the JVM Option field, enter the following string: -Dhttp.keepAlive=false
12. Click Add and then Save.I think I've found it...
The file is server.xml and it is located at:
/var/opt/SUNWappserver7/domains/domain1/server1/config
There is a section under <java-config> with about 14 lines containing various <jvm-options>
I'll try adding this directive to the end of the <jvm-options> as follows:
<jvm-options>-Dhttp.keepAlive=false</jvm-options> -
Context change not working during test
Hi all,
I've made a mapping. With several context changes. They all work fine when testing them in the message mapping and the operation mapping. But when I'm testing the actual scenrio all the target fields where a context change is used the target value is missing.
What is going wrong?HI, thanks for the quick post. But the missing parts are already in the sxmb_moni. A download will not help in my situation. I thnk
-
How to Change BOM and Document Lab/office only without using chagne number
Hello expert.
Is there any Function Module for change BOM and DOCUMENT lab/office only without using change nuber. or
Please let me what are the tables i have to update for change BOM and Document Lab/office in report.
Regards
srinivasNirav,
The Integer type UDF is the answer.
If you have a large amount of values to convert, you might create a new Integer UDF ("UDF_INT"), and use a GlobalChange to move them. Example: where "UDF_NUM" is not equal to " ", "UDF_INT" = "UDF_NUM".
This will put your values in the new field without decimals.
-Tom -
Hi
I need a udf to add context change
Can anyone help me?
Regards
NehaA search on help.sap.com is the answer.
http://help.sap.com/saphelp_nw04/helpdata/en/b1/83a09f668320419dbe00a741e0fe6a/content.htm
addContextChange();
Appends a context change to the list. This can also be achieved if you append the constant ResultList.CC by using addValue().
Regards
Bhavesh -
How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?
Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Change Filename using XSLT mapping without variable subtitution
Hi,
My scenario is IDOC to file...i am using XSLT mapping, i want to change the filename format to OUT_<Purchase Number>_<DDMMYYYYhhmmss>_KKKK.txt, i cannot use UDF function as i do XSLT mapping i also i cannot use variable substitution as the target structure doesn't have PO and timestamp as tag elements. Can i acheive using writing a adapter module? I appreciate if anyone could help me with this..
Many thanks>
Ravibabu Adari wrote:
> Hi,
> If i go with Option1: what changes i need to do in the file adapter to tell the adapter to pick the filename from XSLT ?
> If i go with Option2: To which element to the target structure should i map the filename using UDF ? do i have to add additional element to the target structure? what changes i need to do in the file adapter to tell the adapter to pick the filename from Message mapping ?
>
> Many thanks
Hi,
in both cases you need to enable file adapter specific properties and enable the file name...
for this you need to use the dynamic configuration properties for the same...
usage of this option using udf in message mapping is rather easy than to use in XSLT...for this you dont need to change the structure in the message mapping...message mapping is just needed for execution of the udf.. thats it..
HTH
Rajesh -
How can change my code without using if else in procedure
Hai ,
I have wrote code like this
if RPTFORMNTH='M' then
SELECT coalesce(SUM(IN_RWEEKS),0),
INTO C2_COL1
FROM HS_CASEDTA_DTLS_TB
WHERE UPPER(VR_HAUNM) like NVL(case when HAUNM='0' then null else UPPER(HAUNM) END , UPPER(VR_HAUNM))||'%'
AND IN_ULBOBJID=ULBOBJID AND CH_FLAG!='D'
AND VR_RPTFORMNTH=VR_RPTFORMNTH
AND IN_YEAR=IN_YEAR;
ELSE
SELECT
coalesce(SUM(IN_RWEEKS),0),
INTO C2_COL1
FROM HS_CASEDTA_DTLS_TB
WHERE UPPER(VR_HAUNM) like NVL(case when HAUNM='0' then null else UPPER(HAUNM) END , UPPER(VR_HAUNM))||'%'
AND IN_ULBOBJID=ULBOBJID AND CH_FLAG!='D'
AND
TO_DATE(('01/'||VR_RPTFORMNTH||'/'||IN_YEAR),'DD/MM/YYYY')
BETWEEN to_date('04/' || to_char(RPTYEAR-1),'MM/YY')
AND add_months(to_date(RPTFORMNTH || to_char(RPTYEAR),'MonYYYY'),1)-1;
END IF;
My query is without using if else and replicate data in if and else how can i modify code.Observe that only where condition i want changes that's why i used if else without that how can i modify where clause with that two conditions.Please give me guidance.
Regards ,
rajendar.hi,
I think you want your condition to change inside the where clause so you could have only one select statement. If that is so try this:
SELECT coalesce(SUM(IN_RWEEKS),0),
INTO C2_COL1
FROM HS_CASEDTA_DTLS_TB
WHERE 1 = CASE WHEN RPTFORMNTH='M' THEN
CASE WHEN UPPER(VR_HAUNM) like NVL(case when HAUNM='0' then null else UPPER(HAUNM) END , UPPER(VR_HAUNM))||'%'
AND IN_ULBOBJID=ULBOBJID AND CH_FLAG!='D'
AND VR_RPTFORMNTH=VR_RPTFORMNTH
AND IN_YEAR=IN_YEAR
THEN 1
ELSE 0
END
ELSE -- RPTFORMNTH !='M'
CASE WHEN UPPER(VR_HAUNM) like NVL(case when HAUNM='0' then null else UPPER(HAUNM) END , UPPER(VR_HAUNM))||'%'
AND IN_ULBOBJID=ULBOBJID AND CH_FLAG!='D'
AND TO_DATE(('01/'||VR_RPTFORMNTH||'/'||IN_YEAR),'DD/MM/YYYY')
BETWEEN to_date('04/' || to_char(RPTYEAR-1),'MM/YY')
AND add_months(to_date(RPTFORMNTH || to_char(RPTYEAR),'MonYYYY'),1)-1
THEN 1
ELSE 0
END
ENDMessage was edited by:
Bobbydj
hi Are, after belatedly reading Rob's post, I think his post is better. I was only looking at your highlighted code, but he took the most common conditions inside the where clause. -
Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!
iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC". -
Capturing data changes in alv using classes
Hello All,
Currently am working on alv report using classes..,In this report am displaying 3 grids in the output in 3 different containers(cl_gui_custom_container)...,Am able to handle the data changes done in the grid at the run time using event data_changed ...,
Now the requirement + problem is ...if i do the changes in all the grids ,,,,,and if i click(hotspot event) on any of the rows/records in any of the grids ...,, I need to be able to capture all the data changes done in all the other grids....,,
for example:-
if i modify some records in all the 3 grids ,,, and if I click any of the row in any of the grid at a time,,, all the changes done in all the grids should be captured.....( in simple words one click all changes )
I tried using data_changed event....., am only able to capture the changes of the grid on which i clicked ( ie.hotspot event) but not the changes which i have done on other grids.....Pls. help me out with the possibilities
Hope am clear..
Thanks
JohnHi friend,
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'UPDATE'.
CALL METHOD r_grid->get_selected_rows
IMPORTING
ET_INDEX_ROWS =
et_row_no = it_rows.
LOOP AT it_rows INTO wa_rows.
*****modify the first container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
IMPORTING
ET_INDEX_ROWS =
et_row_no = it_rows1.
LOOP AT it_rows1 INTO wa_rows1.
*****modify the second container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
IMPORTING
ET_INDEX_ROWS =
et_row_no = it_rows2.
LOOP AT it_rows2 INTO wa_rows2.
*****modify the third container data***********
endloop.
endcase.
Now we can create three container and three different grid class object but we are using same method.
UPDATE buttton is common to all three containers.
But one important point when u change the records in container we must select the rows then only selected rows r come to the internal table otherwise it is not come.
CREATE OBJECT r_container
EXPORTING
container_name = 'CONTAINER_1'
CREATE OBJECT r_container2
EXPORTING
container_name = 'CONTAINER_2'
CREATE OBJECT r_container3
EXPORTING
container_name = 'CONTAINER_3'
CREATE OBJECT r_grid
EXPORTING
i_parent = r_container
CREATE OBJECT r_grid1
EXPORTING
i_parent = r_container2
CREATE OBJECT r_grid2
EXPORTING
i_parent = r_container3
NOW WE CAN CALL THE METHOD.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid2.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid3
I thing it should be possible.But u must remeber u must select the records when u modifie in three containersBUT UPDATE button is common to all three containers.
Regards,
MURALII -
ALV issue - capturing user changes in editable fields using custom button?
Hi,
I created a custom button in ALV tool bar. And also in my ALV grid I have couple of fields Editable option. User can change values for these 2 fields.
My question is -
After changing values for these editable fields(more than 1 record) , user will click on custom button and then I have to update all the user changed values in to my internal table(lt_tab) and then I have to process logic.
Problem is when user click on Custom button in ALV tool bar it is not having the changed values in lt_tab table.
Only when user clicks some thing on ALV grid records or fields then it is getting all the changed values in to lt_tab.
Can any one tell me how I can get changed values when user clicks on custom button?
1. Can we place custom button in ALV Grid? instead of ALV tool bar?
or
How I can capture user changes when they click on custom button?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
TABLES
T_OUTTAB = lt_tab
Please check this logic-
CASE r_ucomm.
WHEN '&IC1'.
- It_tab having all changed field values
WHEN 'custom button'.
lt_tab - not having any changed values - showing all initial lt_tab values.
I highly appreciate your answers on this.
Thanks.
Rajesh.Hi,
Use this code, its working:-
*& Form ALV_DISPLAY
* SUB-ROUTINE ALV_DISPLAY IS USED TO SET THE PARAMETERS
* FOR THE FUNCTION MODULE REUSE_ALV_GRID_DISPLAY
* AND PASS THE INTERNAL TABLE EXISTING THE RECORDS TO BE
* DISPLAYED IN THE GRID FORMAT
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = v_rep_id " report id
i_callback_pf_status_set = 'PF' " for PF-STATUS
i_callback_user_command = 'USER_COMMAND' " for User-Command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout " for layout
it_fieldcat = it_field " field catalog
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort " sort info
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant " variant name
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final " internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form USER_COMMAND
* SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
* AND EXECUTE THE APPROPIATE CODE
* -->LV_OKCODE used to capture the function code
* of the user-defined push-buttons
* -->L_SELFIELD text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
* when the function code is EXECUTE then process the selected records
WHEN 'EXECUTE'. "user-defined button
* to reflect the data changed into internal table
DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data.
ENDIF.
* refresh the ALV Grid output from internal table
l_selfield-refresh = c_check.
ENDCASE.
ENDFORM.
This will reflect all the changes in the internal table. Now you can include your logic as per your requirement.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
How to move the changes from one system to other without using CMS
Hi
In our project they are migrating NWDI 6.40 to NWDI 7.0.
During migration CMS won't be available.
Could you plesae tell what are the different options are there to move the WebDynpro changes from (NWDS) Development to Quality system and then production system without using CMS server?
If i will create a development package and import this packgae in Quality package will my new changes also be available in Quality server?
Thanks & Regards
SusmitaHi Susmita
I wasn't completely sure, but from your description of your problem, it seemed like you would have access to your DTR during your upgrade. The following solution assumes as much. If this is not the case, you'll need to do things slightly differently, but the solution will still be possible.
Depending on the scope and size of your changes, it may be practical for your developers to deploy directly from their NetWeaver Developer Studio (or for a designated administrator to install the NWDS and do the same). To do so, from the Development Configurations perspective, create a new NWDS project for each of the DCs you want to deploy. Then right-click the project and choose from one of the deployment options. (Deploy new archive and run will allow you to see if your deployment has taken effect.) When deploying, the target server is the one set up as your J2EE engine in the NWDS properties - you'll consequently have to modify this when the target server for your deployment changes (from QA to production, or vice versa).
Note that this is only applicable in certain situations, and only as a short term stopgap measure. This sort of practice - developers or administrators deploying haphazardly to servers other than those intended for development - is precisely what the NWDI is designed to prevent (and is one of very few things it's fairly good at doing). For instance, if your QA and production systems are attached as TEST and PROD runtimes systems respectively in your NWDI, a full assembly and subsequent full deployment would usually occur to these servers when deploying with the NWDI. This is a much stronger guarantee of consistency than the build that will be performed within your local NWDS to deploy your changes. (Conversely, the rigidity of the assembly is perhaps the NWDI's greatest design flaw.)
(Also, Snehal: thanks for the information on the sapmake_util blog. It's not something I've encountered before and looks very useful.)
James
Maybe you are looking for
-
Did you hit this error before in javafx MediaPlayer?
Hi,All I 'd like to make a javafx mediaplayer to play mp3 ,and I found some of mp3 wouldn't be supported by javafx mediaplayer,I don't know how can I solve this bug? I posted a mp3 file to the public network ,if you are interested in this issue, you
-
Extended desktop - choosing location of menu bar?
Is there a way to make the menu bar -- for Finder and (especially) apps -- appear on the "second monitor" instead of the built-in monitor of my new iMac? If not in Tiger, is this possible with Leopard? Why? I'll want to use the built-in for TV/video
-
I have the following 2 questions regarding 1099s. One has to do with the fact that I read somewhere that after you have added tax number information to a vendor (s), that there is a program that you need to run so that SAP will flag the appropriate
-
I got my camera memory card stuck inside the CD drive... help?
I tried to put the memory card into the right slot but i wasn't looking and it went in the wrong slot and i can't see it....
-
Need to know the highest version of labview that was released for HPUX
Does anyone know the highest version of labview that was released for HPUX operating system ?