Context change not working during test

Hi all,
I've made a mapping. With several context changes. They all work fine when testing them in the message mapping and the operation mapping. But when I'm testing the actual scenrio all the target fields where a context change is used the target value is missing.
What is going wrong?

HI, thanks for the quick post. But the missing parts are already in the sxmb_moni. A download will not help in my situation. I thnk

Similar Messages

Context change not working

hi,
i am doing a maping between an xsd and message type with structure which has:
1.nested structure
2.source field occurs more than once in thses netsed structure.
fields not having multiple occurence have the same value as in source but the one having mulitple occurence are having different fields.
my context handling not working.
i m using splitByValue and changing the context of source field to its immediate header which is again not working.
can anyone help in this regards
i appreciate quick reply which is needed-thanks

okay Mark,
i will try to explain,
target
<Root>
><Parent Node1> 1..unbounded
><childe node1> 0..1
><childe node2> 0..1
><Parent Node2> 0..unbounded "item of parent node1"
><childe node3> 0..1
><childe node4> 0..1
><Parent Node3> 0..unbounded ""item of parent node2"
><childe node1> 0..1
><childe node2> 0..1
source
<Root>
><Parent Node> 0..unbounded
><childe node1> 0..1
><childe node2> 0..1
><childe node3> 0..1
><childe node4> 0..1
when i try to check the context at parentNode1,2,3 its occurences gets affected.
like if supoose parent node1 is suppose to occur3 times along with its items i.e parentNode2, parentNode3; it occurs 3 times but in the 2nd and 3rd occurences there are no items in it.
rest the child nodes are mapped wth context chnge to its immediate header using splitVal.
let me knw if nt clear
thnx al

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

Microphone not working during call

microphone not working during phone call. both microphone and headphone mic not working during normal phone call. microphone works during facetime call. any suggestions?

Hi there naxster,
You may find the troubleshooting steps in the article below helpful.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
-Griff W.

Policies assigned to groups - membership changes not working

I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on group membership.
If I change a user from one group to another group this change does not reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

What you observed is the expected behavior.
ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
Try Updating the published policy to see if that works. From the docs:
Updating a Published Policy
Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
>>>
From: laurabuckley<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/15/2009 7:16 AM
Subject: Policies assigned to groups - membership changes not working
I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on
group membership.
If I change a user from one group to another group this change does not
reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT
an option in my environment. All security assignments MUST happen at a
group level.
laurabuckley
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=395870

Validation not working during Mass Change of Vendor Line Items

Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep

Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.

NavigateToURL Works During Testing But Not Once Published

Trying to create a simply hyperlink in Flash. Works perfectly during testing. But when I upload to the net, clicking the link takes me to www.thirdnewhope.com/iamtnh.blogspot.com rather than to just www.iamthn.blogspot.com. I've tried changing allowscriptaccess to always. That doesn't work either. I am stumped :-(
AS3 code:
button_1.addEventListener(MouseEvent.CLICK, goClick);
function goClick(evt:MouseEvent):void {
   var url:String = "http://www.iamtnh.blogspot.com";
   var req:URLRequest = new URLRequest(url);
   navigateToURL(req, "_blank");
HTML code:
<div id="flashContent">
            <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="560" height="400" id="events2013" align="middle">
                <param name="movie" value="events2013.swf" />
                <param name="quality" value="high" />
                <param name="bgcolor" value="#000000" />
                <param name="play" value="true" />
                <param name="loop" value="true" />
                <param name="wmode" value="window" />
                <param name="scale" value="showall" />
                <param name="menu" value="true" />
                <param name="devicefont" value="false" />
                <param name="salign" value="" />
                <param name="allowScriptAccess" value="sameDomain" />
                
                <object type="application/x-shockwave-flash" data="events2013.swf" width="560" height="400">
                    <param name="movie" value="events2013.swf" />
                    <param name="quality" value="high" />
                    <param name="bgcolor" value="#000000" />
                    <param name="play" value="true" />
                    <param name="loop" value="true" />
                    <param name="wmode" value="window" />
                    <param name="scale" value="showall" />
                    <param name="menu" value="true" />
                    <param name="devicefont" value="false" />
                    <param name="salign" value="" />
                    <param name="allowScriptAccess" value="sameDomain" />
                
                    <a href="http://www.adobe.com/go/getflash">
                        <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
                    </a>
                
                </object>
                
            </object>
        </div>

WOW!!! Knew it would be something simple causing so much pain :-) Thank you kglad!!!

Color Context does not work properly

Hi,
I'm using MII 12.1
ColorContext does not work properly with Lights and Multilights. I did not test other grids.
For every match it shows black colored lights.
Is there a way to solve this problem?
Thanks.

Cemil,
There was a bug in the early versions of 12.1 for color contexting. Color context changes were made in the display template were not being saved. I would strongly urge you to upgrade to SP5 patch 1. However, if you want a very crude way to test if your contexting is working the way you want it to:
1. Export your display template
2. Find the color context section of the xml and change the settings to the desired color coding
3. Import your modified display template
4. Test
I do not recommend this as a short term or long term solution. It is a hack and should be recognized as such. But it will allow to test your configured display template's behavior.
Regards,
Mike

IPhone 4 Mic & Speaker not Working during Call

Hello All,
I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
Waiting for reply....

Do the basic troubleshooting steps described in the User Guide:
1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If restoring as new doesn't help, there is a hardware failure.

Lotus Notes password change not working

Hi,
I'm integrating Lotus Notus and currently we are able to create users in the Domino server, so we have many doubts:
Lotus Notes Id Files are created in the Domino server, but this Id Files needs to be copied in the users own laptops or desktop pc's. What is the best way we can give the user the Id File?
For password changes: I have test password change from OIM self-service, I mean, I create a user, then I provision the user account to Lotus and finally I login with the user account to OIM user self-service interface and try to change password, connector log says everything is ok and the user Id file is correctly modified but, in Domino's server, Lotus internet/http password is not modified, so it is correct? I expect the http/internet password to be changed too. For test purposes I have to copy the new Id file from the Domino server and paste it in the client pc where Lotus Notes client is installed, I put the new password and I'm able to login, but http/internet password is not changed.
So I don't know if this is a limitation from the connector or if I miss something in order to be able to perform password changes, I have read many times connector documentation but this is not clear for me. I also have read oracle waveset Domino connector documentations but seems to work in a different way OIM do.
Please help me
Regards.

Hi SaikatDas,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation
Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue, it is related to the IIS, so I’m afraid that it is not the correct forum for this issue. therefore, I suggest you can post this issue directly to the IIS forum:http://forums.iis.net/
, maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Context IDs not working in merged projects

I can’t seem to get context sensitivity to work. I have
a master project: OG and two slave projects: rbc and MAINT. I used
the TOC tab in the OG project to merge the rbc and MAINT chms. The
merged TOC and index appear to be working OK.
Next I edited the OG BSSCDefault.h file so it looks like
this:
#define Operator_s_Guide 1
#define MSW 3
#define AAA 4
Then I edited the OG.ali file:
Operator_s_Guide=HTML\operators_guide.htm
MSW=redirect.xhtm#MSW
AAA=redirect.xhtm#AAA
I updated the redirect.xhtml file
<html>
<head><title>Redirect Page</title>
<script>
var Code = window.location.hash.substring(1);
var URL= "";
if (Code == "AAA") URL="its:rbc.chm::\HTML\AAA.htm";
else if (Code == "MSW")
URL="its:MAINT.chm::\HTML\banner.htm";
if (URL != "")
window.location.replace(URL)
else if (Code != "")
alert("Redirection code not defined: "+ Code);
</script>
</head>
<body>
</body>
</html>
redirect.xhtml appears in OG Baggage files and the [FILES}
section of the OG.hhp.
When I test using the RoboHelp CSH tool, ID 1 (local to
OG.chm) works. IDs 3 and 4 open the OG.chm but the topic is
“The Page cannot be displayed”.

Hi,
In your redirect.xhtml file, be sure to use forward slashes
rather than backslashes in the paths to the slave topics. For
example, these are right:
if (Code == "AAA") URL="its:rbc.chm::/HTML/AAA.htm";
else if (Code == "MSW")
URL="its:MAINT.chm::/HTML/banner.htm";
but backslashes will break the redirect mechanism.
Pete

ICE edit, in context editor not working?

I can't seem to activate the in context editor for the site newmovers.businesscatalyst.com. The 'Edit' button is there, and when I click it the link changes to /icecube but nothing else happens. I contacted BC's support team and was told "I suspect the reason why the edit button is not working is, you have custom code placed on the pages."
It works on my other sites, just not here.
Has anyone else had an issue like this? I wasn't aware everyone else was using non-custom code for their sites! Is it possible that I have some Javascript or other code that is disrupting?
Any help greatly appreciated!

After some back & forth, the BC support team was right that it was my code which was breaking the ICE:
I had two div's with the same id on my home page. Not sure why that broke the in context editor, but maybe this will help someone else out down the road.

Why hyperlink color change not working with Safari?

With several sites I visit when I click on their text link lists I see a colored symbol change to let remind me I visited that site. Unfortunately this only works when I use Firefox or IE, not Safari. Is there a reason this does not work with Safari? Is there anything I can do? thanks.
Safari 3.2.1

Hi ..
YouTube content requires Flash.
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video. If you still have problems, try troubleshooting Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

SAP Netweaver 2004 [and] I.E 7 CONTEXT Menu not working??

Hello there,
Installed: SAP NetWeaver 7.0 (2004s) SPS 15
For some reason when I use Internet Explorer7 browsing the SAP Netweaver Portal. At the Content Administration>>RightClick on <Portal Content> is not working?
Like I mean, I am unable to open up the tiny context menu where you get the options: [New, Open, Refresh, Change ID]
But, when I use Firefox 3 everything is working fine. I can see the context menu opening up, but not in the case of I.E 7.
I got the latest Java SDK installed: j2sdk1.4.2.18
Please note: I previously had j2sdk1.4.2.09 which didnt fix the above issue. So, I thought upgrading the Java SDK would fix my issue.. but, it did not.
My O.S: Windows XP SP2.
Any of you had this issue in the past ? Found solution?
Can you please let me know?
Thanks
Dino.
Edited by: Dino R. on Jul 24, 2008 12:46 AM
Edited by: Dino R. on Jul 24, 2008 12:46 AM
Edited by: Dino R. on Jul 24, 2008 12:53 AM

Hi Dino,
The problem is not with the SAP NetWeaver 7.0 (2004s) SPS 15 but with the browser Internet Explorer7. We have also faced this problem then we installed IE 6. And it started giving the context menu.
regards,
Swati

Satellite A205-replaced HDD and recovery CD not working; media test failure

Please help,
My wife's computer crashed, it all started with windows\system32\en file corrupt or missing. Took it in to the geek squad and diagnostics test said hard drive corrupt.
(Trying to recover the data is another problem to solve later)
To save money I ordered a new HDD (WD320GB) installed the new HDD, inserted the recovery disc and get the following message:
Pre-boot execution Environment (PXE) v2.1
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
Operating System not found
I can see the new HDD in the BIOS, I've changed the boot order to start with CD/DVD drive but still get the message above.
What now?
Thanks for any help that I can get.

I want to say thanks to all who helped. The problem with recovery CD's not working was the DVD drive.
I was able to get a used DVD drive really cheap and was able to reinstall to factory condition.
Just for kicks once the install and all updates were completed I stuck the old DVD drive back in and still didn't work. So other than alot of time online and looking around for a DVD drive that would fit the laptop, I spent less than $10 for DVD drive and $65 for another hard drive which is good news, the bad news is my wife couldn't live anylonger without Facebook and bought another laptop, HP this time.
Well my daughter will have a Tosh to do her school projects.
Now to figure out what caused the crash, loss of data and DVD not to work in the first place.
Thanks again for all your help.
Happy New Year

Context change not working during test

Similar Messages

Maybe you are looking for