Capture data in 1D barcode upon merging XML with XDP?

Hi,
The scenario is:
Forms Server 7.2.2 is being used for merging XML data with an XDP file to render a PDF (displaying a pre-filled form to user).
On the XDP, there is a 1D Barcode and few fields are mapped to this barcode (the barcode is intended to capture form identification information).
Upon merging, the barcode should capture the data of those fields (data is being fetched from a db and fed as XML to Forms server). This is required as the pre-filled form will be printed and then mailed to another location, where the barcode will be read using a decoder to capture form indentification.
Will the 1D barcode captures data from those fields, after merging XML with XDP?
The form is NOT Reader Extended. Is Reader Extending a necessity for enabling 1D barcode to capture data?
Is this also applicable for 2D barcodes?
Thanks a lot for your help! :)

Thank you Hodmi,
I had forgotten to define the Record name parameter in the PDF Output Options.
As the XML structure changed, not upating this parameter was preventing the process from working.
Now it is working just fine. Thank you!
Marcos

Similar Messages

Merging XML and XDP files

Hello!
I must build this POC for a client and the idea is merge XML and XPD files to feed a LiveCycle Output process and create PDF files.
I've built the XDP files and the XML to start things, now I need to figure out how to create the process to merge them in Workbench.
Is there any tutorial to help me with this task?
Thank you for any ideas!
Marcos

Thank you guys for helping a beginner in trouble.
I hope I will soon be able to help others here and help the comnunity.
Right now, I've so much to learn!
Thank you!
Marcos, Brazil

Capture data from a barcode reader

Hi,
I would like to know if anyone knows any way of integrate a barcode reader with a web application.
I need to create a web page to confirm the reception of letters, and i use the barcode reader to read the letter number. So the web page need to received the barcode number and make the automatic submit.
Thanks in advanced,
Ricardo

1:
get the comm stuff working first
2:
then work on connection to the web application.
3:
a browser in a client that runs,applets,javascript and displays
html.
the web server does all the real work
you can write your own client that will replace the browser and still
conenct to the web application
4:
i'd say a signed applet would work

Submit XML or XDP

I created a PDF form using livecycle. I can pick up the data submitted to my url as http post (using ASP Request.Form() ).
My question is: how do I pick up the data submitted when I submit as XML or XDP? Any sample in ASP gratefully received.

Live Cycle Forms can handle submissions from any of those formats and will return the data as XML. If you are using ASPs you can access the FormServer API by making a SOAP call.
Anthony
Adobe Developer
See you at Adobe MAX!
http://www.adobe.com/events/max/

Capturing data from a RS232 device

how do I capture data from an RS232 device to my APEX application. Precisely, I am using a barcode scanner and I need to know how to get the barcode data into an item (say P12_barcode) in my application. I have tried the keyboard wedge and the problem is that I have to set the input focus each time I need to collect the barcode of an item, so I have to switch to RS232 mode but how do I get this barcode data now?
Please HELP...

Thanks a trillion for this reply! wether your reply was helpful is an understatement in this matter!
That is the type of Barcode scanner I am using man... they call it USB Keyboard emulation. It scans into note pad, word processors and text items freely.
In my design for a solution to this problem, I have on paper, your type of solution but I lack the ability to set the focus on the desired Text Field when my cash_sales page loads.
Secondly you said "I did have to set it to include a "Enter" after each scan" that touched upon another bug in me: I had always wanted the form to submit after each scan so that my procedure can use it against the items database and display the item in my Current Transaction Report. How did you set it to include a "Enter" after each scan? Is it on the scanner or at the page item level?
Precisely I am using Metrologic MS9520 barcode scanner a.k.a Honeywell MS9520 barcode scanner!
If I can set a cursor in my Px_Barcode text item after loading my CASH_SALES page and automatically submit the page after a scan(without clicking any button) then my nightmare is over...and you become my Virgo 2009 Hero.
Happy September :)

Need to merge xml o/p from different sources to generate BIP Report from OA page

Hi,
Currently in our product Quoting , we are using many VO queries to generate the Report
Now we have created one data template file to combine all VO queries to generate xml o/p
The problem we are facing is that we didn't added Contracts VO query in our DT file so we need to merge
xml o/p coming from DT file and Contracts VO and pass to Process Template XDO api to generate the report
Please tell how to merge the xml o/p in OAF ?

Thanks Shridhar for reply , you provided code for xml coming from two VO
but I am having scenario where getting one xml o/p from data template file and seconf xml o/p getting from contracts api as -
ByteArrayOutputStream l_docXML = new ByteArrayOutputStream(1024);
// Here getting xml o/p from DT file
l_docXML = (ByteArrayOutputStream)this.getDataTemplateXML(transaction,"ASO","ASOPD",parameters1,null);
// Here getting xml o/p from contacts api
ContractTermsXMLGenerator.writeXML(PrintQuote,
                    (OutputStream) l_conXML,
   true,
   documentType,
   new Number(params[8]),
   new Number("0"));
// code to merge two xml into one xml m_docXML
try{
             if (l_conXML.size() > 0)
                  DOMParser dp = new DOMParser();
                  l_docIP = new ByteArrayInputStream(l_docXML.toByteArray());
                  dp.parse(l_docIP);
                  XMLDocument xDoc = dp.getDocument();
                  l_conIP = new ByteArrayInputStream(l_conXML.toByteArray());
                  dp.parse(l_conIP);
   XMLDocument cDoc = dp.getDocument();
   Node cNode = cDoc.getDocumentElement();
                  if (cNode != null)
                       Node xDocConNode = xDoc.adoptNode(cNode);
                       Node conData = xDoc.createElement("CONTRACT_DATA");
                       conData.appendChild(xDocConNode);
                       xDoc.getDocumentElement().appendChild(conData);
                     xDoc.print(m_docXML);
                     writeLog("GenerateCLMDoc::XMLMerge Complete");
           catch(Exception e)
       writeLog("GenerateCLMDoc:: Doc contract XML Merge - " + e.getMessage());
                  throw e;
    finally{
                    l_docIP.close();
                    l_conIP.close();
Please check if it is correct code , do I need to change it with code provided by you
can we chat over any messenger ?
once again thanks for your reply

How we can populate the form data from 2D barcode

Hi All,
Can anyone tell me how we can populate the form data from 2D barcode, will this can be done through script(javascript)?.
Thanks & Regards,
Faisal Afzal

I was hoping someone could put me in the right direction here. I am basically doing the same . I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
Thanks

LR4 imports videos but gets the capture date wrong (1-1-1970)...

Hi,
LR4b on Win7 Home Premium x64, clean system reinstalled today.
I managed to successfully import my M4V videos (previously recognized, imported and managed with LR3) under LR4
even though it complains each time that Quicktime is not there (well, thank you for the info Adobe but this is on purpose that I don't want to install bloatware)
However, upon completion of the videos importation, no valid capture date is assigned to them, and they all show as 1-1-1970. Plain wrong. More tragically, files were renamed to this 1970 nonsense, so I lost the original capture date which was part of their filename. What a mess.
Each M4V video comes from a Quicktime Mjpeg .mov file, converted to more efficient H264 with FFMpeg.
Each M4V video has an associated JPEG sidecar (as originally taken by the camera) which has the correct EXIF capture time and date.
LR4 makes absolutely no use of the jpeg sidecar files, thus defeating their very purpose!
My silly (?) idea:
if LR4 for whatever reason is not able to extract a capture date from a video file, it should at least try:
1/ to extract the capture date from sidecar files, e.g. XMP or companion JPEG (which are indeed copied along, but obviously of no use to the software);
2/ to use as a last resort the file date for the video file (this is probably exposed to LR via filesystem functions)
Or perhaps just warn that files can not be imported since no 'date' metadata is retrievable... better than importing stuff with silly metadata...

Hi Anthony,
If you drag a folder of images into the viewing window of iPhoto a roll will be created with the Folders name.
Same thing if you use "add to library" and choose the folder of images to import.
Lori

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Unable to capture data from Serial port using LVRT2010 in single core pentium 4 machine

I am using application written in Labview using windows Labview
Runtime environment 2010. Application creates a tunnel to intercept data from
Serial port.
My problem is, Currently, I am using single core Pentium
processor. When I am trying to intercept the data between COM1 and COM7 (COM 7
is a virtual port) it is not able to capture data.
When I am running Labview RT environment using dual core
processor machine it is running normally. I wonder whether it could be the compatibility issues with
single core Pentium processor.

Hi Magnetica
Are both of the machines running the same runtime engine,
drivers ect?
Have you had RT applications running on this
machine before?
Is the development computer a 64bit machine?
The processor is a supported model (See link below).
http://zone.ni.com/devzone/cda/tut/p/id/8239
Regards
Robert
National Instruments UK & Ireland

Importing from iMovie 06, lose capture dates

When I import old iMovie 06 movies, the capture dates gets lost. Here is one of the original clips in iMovie 06:
However, after importing in iMovie 11, the capture dates are lost. I tried many variations, like import the iMovie 06 project, or cd to the *.iMovieProject directory and import the actual clips, etc.
Now, good iMovie11 clips have the capture date imbedded in the file name (as in clip-2010-03-14 hh;mm;ss.dv). However, the ones imported from iMovie 06 end up in iMovie 11 with simple names such as clip55.dv. So it's not surprising I cannot see the capture dates in iMovie 11.
So I looked inside the *.iMovieProject directory hoping to find the capture dates either in the file name or in a plist, but I couldn't (nothing in the plists below)
... Jan 23 2010 Cache/Thumbnails.plist
... Jan 23 2010 Cache/Timeline Movie Data.plist
... Jan 23 2010 Cache/Timeline Movie.mov
... Nov 8 2009 Media/Clip55.dv
etc
Finally, I opened Clip55.dv in QuickTime and looked at MovieInspector, but I could not see any capture date (similar to exif in jpegs).
So obviously I missed them. My question is where in the iMovie 06 project can I find them? If accessible, I can write a script to fix the clips imported in iMovie11 by changing their names. I tried it manually, and it worked.
Thanks in advance

Hi - Couple of things.
Click on the offending clip that you imported from iMovie in your FCP Bin and type Command + 9 to see the item properties. Either report those item properties, or if easier, take a screen shot of the item properties and post that.
Then click any where on the timeline you are having trouble with and type Command + 0 (Zero) to see the sequence settings. Either report those settings or take a screen shot of the Sequence Settings window and post that.
In order for FCP to use the video without rendering, both the items properties of the source clip, and the sequence settings must match - and both must be within standard production parameters.
Also, you can click on the source clip in the FCP Bin, then control-click on the clip and select Reveal in Finder from the drop down menu. Once that file is revealed, open it in Quicktime 7 and see if if plays correctly there.
Hope this helps.
MtD

Importing clips from iMovie HD does not preserve capture date

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Capturing data from ALV grid

Dear experts.
Can anyone help me to capture data from ALV grid to pass to a BAPI FM.
My ALV grid has the check box as first column and I want to capture only the rows in the grid with these checkboxes checked. I would prefer to do it without OO.
Regards
Sathar

Loop at the table used for ALV data where <checkbox-field> = 'X'.
Best,
Jim

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

How to display no data found in RTF template ? XML Publisher

Hi
I have xml file, how to display no data found in RTF template ? XML Publisher ?
This is the XML File
<?xml version="1.0" encoding="UTF-8"?>
<INVALIDSERIALPRODUCT>
<P_ORG_CODE></P_ORG_CODE><P_DATE_RANGE_FROM></P_DATE_RANGE_FROM><P_DATE_RANGE_TO></P_DATE_RANGE_TO><P_ITEM_NUMBER>VIR</P_ITEM_NUMBER><P_LOT_NUMBER></P_LOT_NUMBER><P_RMA_NUMBER_FROM></P_RMA_NUMBER_FROM><P_RMA_NUMBER_TO></P_RMA_NUMBER_TO><P_CUSTOMER_NAME></P_CUSTOMER_NAME><P_EMAIL></P_EMAIL>
<G_SNQ>
<USER_NAME>NSAWHNEY</USER_NAME>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:52:23.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000016</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:53:06.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>011000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:09:16.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number does not exist in Axway Track-n-Trace</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000021</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:11:09.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:46:04.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:08:21.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>00000000004 </SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Unknow Error </REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000101</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T19:32:00.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000107</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T02:49:40.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000092</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T07:52:22.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000031</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:24:27.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000034</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:30:28.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Catchall fault scope has been executed</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000010</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T03:36:18.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000158</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T04:19:48.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
</G_SNQ>
</INVALIDSERIALPRODUCT>
thanks
nks

This is the General XML forum.
The homepage description says :
Discussion of the general XML language, standards (XSLT, XQuery, XMLSchema, etc.) and application management issues, suggestions and tips.
The BI Publisher forum is here :BI Publisher
So please mark this post as answered and ask again over there.

Capture data in 1D barcode upon merging XML with XDP?

Similar Messages

Maybe you are looking for