Capture date change event of Time Refresh Control

Hi,
Is there any possible way by which we can capture the date change event from the time refresh control of iGrid?

Hi,
Ok lets do it this way.
I have a page in which i am having radio button for date selection say YTD, MTD and so.
In the page i have a frame in which an iGrid is coming up with some data based on the time period selected on the page.
Now if i change the date from the time refresh control of the iGrid in the frame i want to uncheck the radio button seleted on the page as now its not YTD or MTD or whatever selected previously.
Is there any possible way to do this?

Similar Messages

How to limit data range in a Line chart with Time Refresh Control

Hi All,
I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
For example, I would like to limit the user to navigate in a data range of 8 hours.
Is this posible?
Thanks in advance

Hi Pedro,
as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
Hope this helps,
Sascha

Capture data changes to Control Data

Hi,
I want to replicate any data changes made to the config/control data of SPRO to a non-SAP system. Would there be user exits or change pointers for these transactions? How can I confirm this? If this is not possible then what options are available in SAP ECC?
Eagerly awaiting a response..
Thanks in advance

Dear folk,
In SAP we have two tables CDPOS and CDHDR for the changed data to be maintained.
CDHDR-Header data
CDPOS-Item data.
Based on ur requirement , u can check these tables by giving the table name and field name.
to the appropriate fields in the CDHDRa nd CDPOS.
Revert if u need any help regarding this.
Regards
Abhilash.

How does Sybase Replication Server capture data changes?

Hello,
as far as I know Sybase Replication Server is a central component in a HANA-based enviroment when it comes to replicate data towards HANA engine.
I scan briefly through a white paper of Sybase, but I gives no technical description how the Sybase Replication Server captures data change on the source database.
Can someone gives here explanation?
All the best,
Guido

Hello Marc,
thanks for fair and hornest answer!
I'm currently involved in SAP based project where we are migrated business on DB level, which is some kind of operation a heart. I personally have huge respect for this approach.
Caputring the changes on DB level is a appoarch, but I personally think that you need to capture event on business object level. For exammple the SAP good old workflow knows events for business objects. Also in a ESA-driven application you should have some kind on eventing for business objects.
For the time being the current approach might working for a kind of Proof-of-Concept,
but on a mid and long-term based you need to RETHINK!
All the best & Merry Christmas & Happy new year
Guido

No Data Change event generated for a XControl in a Type Def.

Hello,
Maybe I am missing something but the Data Change event of a XControl is not called when the XControl is used in a Type Def. or Strictly Type Def. (see the attached file).
There may be some logics behind it but it eludes me. Any idea of why or any idea of a workaround still keeping the Type Def. ?
Best Regards.
Julian
Windows XP SP2 & Windows Vista 64 - LV 8.5 & LV 8.5.1
Attachments:
XControl No Data Change event.zip ‏45 KB

Hi TWGomez,
Thank you for addressing this issue. It must be a XControl because it carries many implemented functions/methods (though there is none in the provided example).
Also consider that the provided non-working example is in fact a reduction of my actual problem (in a 1000-VI large application) to the smallest relevant elements. In fact I use a typedef of a mix of a lot of different XControls and normal controls, some of them being typedef, strictly typedef or normal controls and other XControls of XControls (of XControls...) in a object oriented like approach...
Hi Prashant,
I use a typedef to propagate its modifications automatically everywhere it is used in the application (a lot of places). As you imply a XControl would do the same, though one would like to construct a simple typedef when no additional functionality is wanted.
The remark "XControl=typedef+block diagram" is actually very neat (never thought of it that way) because it provides a workaround by transforming every typedef into a XControl. Thanks very much, I will explore this solution.
One issue remains: All normal controls update their displayed value when inserted into a typedef but not XControls. Data change event is not triggered. I known that XControls have some limitations (no array of XControls) but I would say, like TWGomez, that this is a “bug” considering the expected functionality.

Data Change event triggering Process hangs in Process chain

HI Folks,
In a daily running Process chain we have a Data Change event triggering Process , to trigger broadcasting settings
This process is running for a long time , with no progress
in SM50 , there are 2 process
Process 1 : RSRD_BROADCAST_STARTER Status : OnHold Reason : SLEEP
Process 2 : SAPLRSRD_X_RUNTIME Status : OnHold Reason : RFC
I tried to change the Parallel Processing setting as Number of Processes = 1
But still the process is hanging.
Any inputs will be a great help.
Thanks
Sonal......
P.S : SAP_BW 700 0022 SAPKW70022 SAP NetWeaver BI 7.0 and EP 6.0
Edited by: Sonal Patel on Feb 2, 2010 1:47 PM

Hi sonal,
I would suggest you to uninstall all the components and start all new again, n please make sure you have the following order :-
1) install GUI 710 along with BEx 7.0 and 3.x complete.
2) install BW AddOn (bw350gui710_8-10004473.exe latest one from Service market Place).
3) Install BI AddOn (bi710sp11_1100-10004472.exe latest one from Service market Place).
4) Install SAP precalc server (xPreCalServer10_1-10004472.exe, latest one from Service market Place).
In service market place you can get the components from Downloads ->Support Packages and Patches -> Entry by Application Group -> "SAP Frontend Components"
Also, plz make sure that you restart your Server OS after each and every installation.
This would solve your problem.
Rgds,
Sreekul Nair

Data change Event for Information Broadcasting

Hello Forum
This is regarding problem with "Data change Event for Information Broadcasting".
We have integrated the evening in a separate chain which is scheduled after the transaction data load.
In the settings for the event we have mentioned the infoprovider name based on which the reports are to be distributed.
Now, when the process chain is executed it does not distributes any reports though the data is changed in the infoprovider.
However when executed again its distributing it,any ideas what the problem is ?
Regards
Ashish

Hi,
Check out the t.code RSRD_LOG.
have a check at the below link for monitoring via email
http://help.sap.com/saphelp_nw04/helpdata/en/44/5b2341144ba52fe10000000a155106/frameset.htm

HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH

Hi,
HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH?
Thanks

emekaco wrote:
Hi,
HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH?
ThanksSTOP SHOUTING!
now, while displaying the form generate some random number, or take the current time in millis or whatever. Put that number in a hidden field. Insert that unique number along with the real data into the database, but before you do check if the number already exists. If it does you can be pretty sure this is a resubmit of the same data, so don't allow it. This is one way of many to prevent resubmission of existing data.
A good way to prevent a refresh from resubmitting altogether is to do a redirect to a result page right after you deal with the POST request. When the user presses refresh then, he/she will refresh the redirect and not the form submit.

Capturing data changes in alv using classes

Hello All,
Currently am working on alv report using classes..,In this report am displaying 3 grids in the output in 3 different containers(cl_gui_custom_container)...,Am able to handle the data changes done in the grid at the run time using event data_changed ...,
Now the requirement + problem is ...if i do the changes in all the grids ,,,,,and if i click(hotspot event) on any of the rows/records in any of the grids ...,, I need to be able to capture all the data changes done in all the other grids....,,
for example:-
if i modify some records in all the 3 grids ,,, and if I click any of the row in any of the grid at a time,,, all the changes done in all the grids should be captured.....( in simple words one click all changes )
I tried using data_changed event....., am only able to capture the changes of the grid on which i clicked ( ie.hotspot event) but not the changes which i have done on other grids.....Pls. help me out with the possibilities
Hope am clear..
Thanks
John

Hi friend,
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'UPDATE'.
             CALL METHOD r_grid->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows.
LOOP AT it_rows INTO wa_rows.
*****modify the first container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows1.
LOOP AT it_rows1 INTO wa_rows1.
*****modify the second container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows2.
LOOP AT it_rows2 INTO wa_rows2.
*****modify the third container data***********
endloop.
endcase.
Now we can create three container and three different grid class object but we are using same method.
UPDATE buttton is common to all three containers.
But one important point when u change the records in container we must select the rows then only selected rows r come to the internal table otherwise it is not come.
CREATE OBJECT r_container
    EXPORTING
      container_name              = 'CONTAINER_1'
CREATE OBJECT r_container2
    EXPORTING
      container_name              = 'CONTAINER_2'
CREATE OBJECT r_container3
    EXPORTING
      container_name              = 'CONTAINER_3'
CREATE OBJECT r_grid
    EXPORTING
      i_parent          = r_container
CREATE OBJECT r_grid1
    EXPORTING
      i_parent          = r_container2
CREATE OBJECT r_grid2
    EXPORTING
      i_parent          = r_container3
NOW WE CAN CALL THE METHOD.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid2.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid3
I thing it should be possible.But u must remeber u must select the records when u modifie in three containersBUT UPDATE button is common to all three containers.
Regards,
MURALII

Capturing data of the previous time interval with Oracle Stream(HotLog)

I read from 10g Oracle manual that Oracle Steam can capture data within specified time interval with begin_data and end_data options.
For example :
BEGIN
DBMS_CDC_PUBLISH.CREATE_CHANGE_SET(
change_set_name => 'set_cns',
description => 'set_cns...',
change_source_name => 'HOTLOG_SOURCE',
stop_on_ddl => 'y',
begin_date => sysdate,
end_date => sysdate + 1);
END;
However if I set begin_date to previous time from now, Oracle doesn't caputre data anymore in this case.(HotLog method)
(I set begin_date => sysdate - 1/24
end_date => sysdate + 1/24.)
Does anybody know to capture the previous time interval with Oracle Stream?

Change C2 to:
cursor c2(passing_date IN date) IS
SELECT MONITOR_ID, SAMPLE_ID,
               COLL_TIME, DEW_POINT
    FROM ARCHIVE_DATA
    WHERE COLL_TIME < passing_date
    ORDER BY COLL_TIME desc;And rather than populating a table with the three records, you could just select the three records using: where COLL_TIME between Prev3_time and Prev1_time

Pre-fill the OLAP cache for a query on Data change event of infoprovider

Hi Gurus,
I have to pre-fill the OLAP cache for a query,which has bad performance.
I read a doc 'Periodic Jobs and Tasks in SAP BW'
which suggested sum steps to do this
i hav created the setting for Bex broadcasting for scheduling job Execution with data change in info provider
thereafter doc says "an event has to be raised in the process chain which loads the data to this InfoProvider.When the process chain executes the process u201CTrigger Event Data Change (for Broadcaster)u201D, an event is raised to inform the Broadcaster that the query can be filled in the OLAP cache."
how can this b done please provide with sum proper steps
Answers are always appreciated.
Thanks.

Hi
U need to create a process chain or use the existing process chain which you are using to load your current solution, just add event change process type in the process chian and inside it add the info provider which are going to be affected.
Once you are done with this go to the broadcaster and create new setting for that query...you will see the option for event data chainge in infoprovider just choose that and create the settings.
hope it helps

Event structure does not capture mouse click event on toolbar activeX control

Hi
We have a toolbar activeX control on FP. It works perfectly on my computer, but on my coworkers deskyop, somehow the event structure doesn't capture mouse click event.
Any idea? Thanks a lot for any help.
Anne

It's a standard activeX control. I attach a simple vi .
thanks for any help.
Attachments:
toolbar test.vi ‏41 KB

Capture LOV Change Event

Hi,
I need to capture lov change ( where user changes default value ) event and display it as an warning message ( ' Default value has been changed' ) on next screen. Can someone please help me on this.
Thanks
Amar

Amar,
if (pageContext.isLovEvent())
   if("Lov1".equals(pageContext.getParameter(SOURCE_PARAM)) && "lovValidate".equals(pageContext.getParameter(EVENT_PARAM))
                                                                                          && "lovUpdate".equals(pageContext.getParameter(EVENT_PARAM)))
     //write your logic here
The pageContext.isLovEvent method returns true if the event value is
1) LOV_UPDATE-meaning the user selected a value from the LOV modal window.
2)LOV_VALIDATE-meaning the user tabbed out of the LOV input field on the base page.Regards,
Gyan
Regards,
Gyan

Date change based on time of day...

Hello All,
I am new to Java and creating stamps in Adobe. I have been requested to create a stamp that puts the date based on the current date and time. Anything that is stamped after 3:00pm needs to show the bussiness day. Based on the dynamic stamps default in acrobat I am able to create the a stamp with the current date but can not figure out how to create the IF/Then statment to test for the current time and adjust the to the new date if needed. Please help!
Current Sript:
event.value = (new Date()).toString();
AFDate_FormatEx("mmm dd, yyyy");
event.value = "Date " + event.value;
Thanks!
William

I've done exactly this for a client of mine last year, although it was not on BC (but it wont matter). It was for a childrens character series, we had 4 times of the day and even seasons where the website would change colors, get lighter and darker (sun cycle) and play different sounds (frogs at night, birds during the day).
Just have 2-3 different CSS files and load each one according to the time of day or handle everything in Javascript.
PM me and I can give you the URL of the site I am talking about.

Urgent Help need - How to capture client change event

Dear Gurus,
I am not able to track whether user has changed any field in the table or not. I am using IWDNodeElement.isChangedByClient to capture , but it is always returning me false.
PLEASE HELP.
Sample code
wdContext.nodeTravelTable().moveFirst();
          try
               for(int i = 1; i <= tblSize; i++)
                    wdComponentAPI.getMessageManager().reportSuccess("Currency is " + wdContext.currentCurrency_travelTableElement().getCElement());
                    wdComponentAPI.getMessageManager().reportSuccess("Is client changed" + wdContext.currentTravelModeElement().isChangedByClient());
                    if(wdContext.currentTravelModeElement().isChangedByClient())
Thanks in Advance.
Best Regards,
Prasad PMV
PS:Max points will be awarded for any kind of help

Reply by Thomas Chadzelek
I would not recommend to use the changed()/isChanged() methods. They represents "dirty flags" used by our framework in certain situations ("delta handling"). I don't think that applications need access to it, except in certain situations. Anyway, these flags are set whenever an attribute is changed and reset at the end of the roundtrip.
isChangedByClient() represents a different set of "dirty flags" whose reset is under the application's control. They are set whenever a user changes an attribute (through the Web Dynpro client), but not when server-side code does such a change.
In NW04, these flags are quite coars-grained. A node element is marked as changed when any of its attributes has been changed.

Capture date change event of Time Refresh Control

Similar Messages

Maybe you are looking for