Capture excise invoice before goods receipt

Do we have any advantages of capturing excise invoice before goods receipt ?

In terms of distribution of labor, yes. It gives more control to the excise personnel in your org rather than allow the control to the stores personnel who may or may not have sufficient knowlegde to handle these legal documents.

Similar Messages

Enter Invoice before Goods Receipt

Hi
I have scenario:
I receipt Invoice and I want to enter invoice to SAP system.
After goods coming, I will receipt goods by MIGO.
I want to enter MIGO reference to invoice above.
Regards,

Hi
You can do it , but if you carry out Invoice before Goods receipt then how will have the reference of the GR during it?
To carryout this , you have to remove the GR_bsd IV indicator in Invoice Tab of Purchase order.
You may have this indicator flowing to PO for the vendor from the Purchasing view of vendor mastr data
You can carry out GRN later but can not have any reference to the it in the Invoice already processed.
Regards

Invoice before Goods Receipt in Intercompany

Hi all!
We are setting up the Intercompany Purchasing between B1 and R/3 with local stock.
In this scenario, a delivery sent from R/3 creates a draft goods receipt in B1. When the goods arrives you must manually open the draft goods receipt and add it as a "real" goods receipt. This will do the actual posting to the inventory.
When R/3 creates the invoice, it will become a purchase invoice in B1.
At this moment it is assumed that the draft goods receipt is stored as a "real" goods receipt as the purchase invoice will be based on the goods receipt.
If the goods receipt doesn't exist, the purchase invoice will have no base reference and a posting is done to the inventory by the purchase invoice. If you later creates the "real" goods receipt (when the goods arrives), you will make a new posting to the inventory and you end up with:
a) doubled inventory
b) goods receipt with no target
c) purchase invoice with no base document
To prevent this I think the solution is to ensure that the invoice in R/3 is not created before the "real" goods receipt is created in B1.
What is the best practice to ensure this?
Regards
Lars Jönson

Hi Lars,
to be able to post the purchase invoice into B1, it's a prerequisite that a base document (goods receipt) was created and posted. In the standard scenario "local stock" B1iSN does not add an purchase invoice without an existing base document "goods receipt".
B1 raises an DI error "Base Document mismatch..." and B1iSN will take the purchase invoice message into the B1iSN error inbox.
This is how the scenario is defined.
To be able to post the invoice into B1, you can activate an error action for all invoicing messages named "Mark4AutomaticRetrial" within B1iSN. Now you can resend these messages out of the B1iSN error inbox automatically using the maintenance option B1iSN Tools -> Action Handling -> Cfg DA: Automatic Resend once an hour or once a day.
With this option the invoices will be posted automatically, when the B1 draft document is transferred into a goods receipt posting (after the items arrived physially and the quality checks are done).
Best regards
Bastian
P.S.: you can find details how-to set up error action in B1iSN Guide 05 - Operations, chapter 2

Create PO related invoice - before goods receipt/confirmation

Hi all, sorry to ask this very basic question as our system is not working at the moment and I cannot test this out and have very little experience creating PO related invoice in SRM.
First of all, we are operating on SRM 4. I would like to find out whether it is possible to create an invoice with reference to a PO before we create the goods receipt.
The reason why I ask this question is because I was reading up on the IMS functionality that is available from SRM 5 onwards and it listed the functionalities that are available that weren't in the earlier releases. One point mentioned was on the ability to receipt invoice prior to confirmation of goods receipt. I also read from the help document that we can enter invoice with reference to PO for which confirmations have already been entered or for which no confirmations are expected. There is no mention on situations when the confirmation is not done yet.
Appreciate your advice on the above.
Cheers!
SF

Sorry all, I think I am confusing everyone. May be it's because the question is too basic. There is nothing fancy with the PO here. It's a PO initiated from SRM with goods receipt and invoice receipt indicator turned on BUT NOT GR-BASED invoice indicator. I just want to know whether it is possible for me to create an invoice with reference to the PO in SRM if I have not yer done the goods receipt. If I do this in ECC/R3, the invoice would have been blocked (if tolerance allowed).
Even though I know that this should be possible in SRM but because some statements in the SAP help documentation sort of implies that it might not be the case and I do not want to assume it. Plus I have not worked with creating PO related invoices in SRM before and so just want to confirm that it is working. It doesn't help when I was trying to test this scenario in our own system that the system outputs a message relating to backend communication not working.
However, I finally got a chance to test this in another client' site and found that it is possible to create an invoice with reference to a PO even before the goods receipt is posted. Though I have yet to find out why I am getting a different error in our own system, I am happy for now that it is working.
Thanks all for your reply!
Regards
SF

Incoming invoice before goods receipt

Hi friends.
In the standard process of VMS the action for good receipt (GORE) is executed before the action for incoming invoice (INIV). Is there the possibility of doing the way inverse (INIV before GORE). I know that the vehicle belongs to the material type VEHI with valuation category X so it is a single batch. And the batch is created at goods receipt so I'm not quite sure if it is possible to register the incoming invoice previous to the goods receipts.
Thanks.
Pedro

Hi Pedro,
in VMS, the batch is not created when the goods receipt (GORE) is executed. The batch is created at an earlier point of time: It happens during vehicle creation (CREA) already. If you don't create the vehicles via CREA but via CRE1, the batch is not yet created yet but in this case action REAL (which is in this case supposed to be executed prior to ORD1) creates the batch. All this statements are true for the valuation type creation as well.
The VMS actions and the VMS framework in my opinion don't enforce the action sequence GORE->INIV. From a VMS perspective, INIV->GORE is possible as well. Of course you need to set up the action matrices in a way that this is allowed.
It's the standard MM settings which need to be done in a way that INIV->GORE is possible. As far as I know you have to make sure that in the vendor master (view "purchasing data") the "Indicator: GR-Based Invoice Verification"-flag is NOT set. The same flag also exists in the info record (ME12) where it also needs to be removed.
I don't know if further customizing and / or master data settings in MM is required to enable INIV->GORE.
Kind regards,
Steffen

EDI Invoice before Goods receipt

Hello ,
Purchase orders are created in the system with GR based IV checked and the purchase orders are sent by EDI to the vendor .
The vendor ships the material and also send the EDI invoice . Since GR is not posted in the system by that time , EDI invoice is failing in our system .
We have explored the option of turning off GR based IV and have only GR checked so that Goods receipt and Invoice receipt can happen in parallel.. but business wants to have GR based IV .
Is there a way to delay the posting of EDI invoices in our system ? It is not a perfect solution , but this will minimise the EDI invoice failures in our system .
Thanks
Mani

Hello,
This is a common situation faced by many custmers. EDI Invoices can be created without GR. So LIV fails. This can reset for LIV (RKBP-RBSTAT = 1) by using MIR6. You can automate this by developing and running a custom program for MIR6 prior to LIV job.
Thanks,
Venu

Invoice before Goods receipt for SA

Hello ,
we have one scheduling agreement, this scheduling agreement we can make directly Invoice(this is not a GR based Invoice).
The scheduling agreemnt we had made Invoice directly after that we made the GR. how the system will calculates the values in GR.
for example.SA#price 2 INR per KG
Inforecord maintained.
Schedule lines for 18.10.2007 and 26.10.2007, i made the for the invoices for 100 quantity before the GR,
after that i made GR for system will update the purchase order price history table correctly for 50 quantity(means vlaue 100INR), after that i receive the 160 quantity pur ord history table wrongly update by value (qty is taken correctly).
we havnot change the SA price and inforecord.
in this situtation how system behaves plz guide me.

Give me hints?

System is allowing to do invoice verification before goods receipt.

Dear Friends,
I need your help in following scenario, as my system is allowing to do invoice verification before goods receipt.
To test these scenario.I have created one PO. For this PO I done goods receipt. I done invoice verification by putting invoice date as past date, posting date system date means current date. I want to stop this as system is allowing invoicing verification to be done before goods receipt.
Also, I tried after un-ticking GR based IV.
Please suggest me the solution how to stop this. Please help this is urgent.
With Best Regards,
Rajesh

Hi Rajesh,
A)
In goods-receipt-based (GR-based) invoice verification, the invoice relates not to the purchase order, but to individual deliveries. That is to say, the reference document for the invoice is not the PO but the delivery note or the goods receipt document.
Whether you use this approach depends on your billing arrangement with the vendor. This method can be advantageous, for example, when you know the order will be fulfilled by means of many partial deliveries.
Prerequisites
Before you can use GR-based invoice verification, the following prerequisites must be satisfied:
The indicator for GR-based invoice verification (GR-based IV) must be selected for the relevant item in the purchase order (item detail screen).
<b>
A goods receipt must occur before the invoice is entered in the system.</b>
B) If you are carrying out invoice verification with reference to PO, system will not check for the GR. The entire PO amount can be posted.
Hope this clarifies.
Thanks,
Viswanath

Capturing Excise Invoice (EI) at depot

Hi gurus
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
With Regards
baalakrushnan.da

Hi Ashok,
After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
How can this invoice be selected in J1IJ, if we follow this route.
Is this the correct process or I am making some mistake in the J1IG step.
Regards,
Debarshi

Problem in capturing excise invoice

Dear Experts,
I am facing problem at the time of capturing excise invoice in J1IEX.
A message always displays is "Excise Details are not maintanied for Vendor 9000232"
Message no. 8I565
When i am entering excise invoice with reference to PO, without PO or even the Goods Receipt.
Can anybody tell me how to overcome this error.
Thanks & Regards
Prasant Sekhar

hi,
In J1id maintain vendors excise details
Regards
Kedar

Capture excise invoice for GR without PO

Hi,
I am trying to capture the Excise Invoice for a material without PO.
All J1ID entries are maintained for Material, Chapter ID, Vendor, plant etc.
The procedure followed is below:
1. Received the material with Mvt Type 503 Q through MIGO > Goods Recipts > Other. Excise Invoice tab is maintained as 'No Excise' while doing receipt.
2. Posted Part-1 using T-Code : J1I5.
When I am trying to Capture Vendor Excise using T-Code J1IEX > Capture Excise Invoice > Good Receipt (R05) and enter the Material Document Number (created by step 1), system is giving an error
"Document xxxxx xxxxx does not contain any selectable items"
Did I follow the correct procedure ? Is there any other method for capturing this entries ? Am I missing any configs or master data maintenance ?
Please give your valuable suggestions
regards
Arun.

Dear Arun R,
You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
Hope this will help you out.
Regards
AKS

CIN : Excise invoice before Commercial Invoice

Hi All,
Please tell me how to configure TAXINN and CIN settings in case, when we want to create excise invoice before commercial invoice.
I know this can be done but don't know how, please help.
Thanks and regards
Amit

Hi Amit.,
TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from Maintenance screen, which you can Masterthe SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
REWARD if helpfull
Thanks & Regards
Narayana

Capture Excise Invoice J1IEX

Hi,
We post GR selecting the "NO EXCISE ENTRIES", later when we try to Capture the Excise invoice with reference to Goods receipt, system will allows to capture it, but while posting the same, it gives following error;
No Part I exists for availing credit in excise invoice 5000000298 2008
Message no. 4F112
Please suggest.
Thanks
Shp

Hai,
1.As u did the GR with no excise entries, u have to update the registers RG23A or RG23C part1 by Tcode J1I5. After doing this, capture Excise invoice wrt GR doc & post the excise invoice.
2.To update the registers by TCode J1I5 - Update of registers,
enter the following
Company, plant, Excise group, Material document, GR posting date, select the classification ROP - Receipt of material from outside under any other provision, Date & respective registers. & execute.

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Capture Excise Invoice w.r .t Without Purchase order

HI
When i try to post J1IEX i.e Capture Excise Invoice w.r .t Without Purchase order i am getting the following error message :
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '            1.000-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application
Please help me to solve this issue
Thanks & Regards,
Mani

Hi,
check in cin-basic settings- co code settings , there will be a check box "Rounding duty on procurement" , pls tick mark this and check it..
otherwise check in debit / credit selection for EWPO trans type . as per blw in - Logistics General  Tax on Goods Movements  India  Account Determination  Specify Excise Accounts per Excise Transaction
EWPO           Credit     CENVAT clearing account
EWPO           Debit     RG 23 AED account
EWPO           Debit     RG 23 BED account
EWPO           Debit     RG 23 ECS Account
EWPO           Debit     RG 23 NCCD account
EWPO           Debit     RG 23 SED account and ECS and SE CESS
Edited by: Jayakumar Raju A.S on Aug 19, 2009 6:36 PM

Capture excise invoice before goods receipt

Similar Messages

Maybe you are looking for