Capture Excise on Purchase through 1st Level and 2nd Level

Dear all,
Please clear about the Functionality to Capture Excise on Purchase through 1st Level and 2nd Level Dealer Invices in details please.
Regards,
Vishal

hi,
for dealer invoice we first do j1iex here we capture the excise duties
then we do migo &
again we do j1iex to post the excise invoice.

Similar Messages

TS1424 Any attempt at purchasing through Itunes Store and all of a sudden it keeps telling my apple id is disabled, even though it is not.

Any attempt at purchasing through Itunes Store and all of a sudden it keeps telling my apple id is disabled, even though it is not.

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

HT4539 I want to download all the music I purchased through my iphone and computer from the first date i had iphone to date, and keep it in both my computer and iphone.

Need help, I want to download all the music I purchased through my iphone and computer from the first date i had iphone to date, and keep it in both my computer and iphone.

You cannot synch the other way, with the exception of songs purchased on iTunes.
What you need to do is move the iTunes library from the computer to which you've been synching your phone and put it on your new MacBook.

Schema level and table level supplemental logging

Hello,
I'm setting up bi- directional DML replication between two oracle databases. I have enabled supplemental logging database level by running this command-
SQL>alter database add supplemental log data (primary key) columns;
Database altered.
SQL> select SUPPLEMENTAL_LOG_DATA_MIN, SUPPLEMENTAL_LOG_DATA_PK, SUPPLEMENTAL_LOG_DATA_UI from v$database;
SUPPLEME SUP SUP
IMPLICIT YES NO
-My question is should I enable supplemental logging table level also(for DML replication only)? should I run the below command also?
GGSCI (db1) 1> DBLOGIN USERID ggs_admin, PASSWORD ggs_admin
Successfully logged into database.
GGSCI (db1) 2> ADD TRANDATA schema.<table-name>
what is the deference between schema level and table level supplemental logging?

For Oracle, ADD TRANDATA by default enables table-level supplemental logging. The supplemental log group includes one of the following sets of columns, in the listed order of priority, depending on what is defined on the table:
1. Primary key
2. First unique key alphanumerically with no virtual columns, no UDTs, no functionbased
columns, and no nullable columns
3. First unique key alphanumerically with no virtual columns, no UDTs, or no functionbased
columns, but can include nullable columns
4. If none of the preceding key types exist (even though there might be other types of keys
defined on the table) Oracle GoldenGate constructs a pseudo key of all columns that
the database allows to be used in a unique key, excluding virtual columns, UDTs,
function-based columns, and any columns that are explicitly excluded from the Oracle
GoldenGate configuration.
The command issues an ALTER TABLE command with an ADD SUPPLEMENTAL LOG DATA clause that
is appropriate for the type of unique constraint (or lack of one) that is defined for the table.
When to use ADD TRANDATA for an Oracle source database
Use ADD TRANDATA only if you are not using the Oracle GoldenGate DDL replication feature.
If you are using the Oracle GoldenGate DDL replication feature, use the ADD SCHEMATRANDATA command to log the required supplemental data. It is possible to use ADD
TRANDATA when DDL support is enabled, but only if you can guarantee one of the following:
● You can stop DML activity on any and all tables before users or applications perform DDL on them.
● You cannot stop DML activity before the DDL occurs, but you can guarantee that:
❍ There is no possibility that users or applications will issue DDL that adds new tables whose names satisfy an explicit or wildcarded specification in a TABLE or MAP
statement.
❍ There is no possibility that users or applications will issue DDL that changes the key definitions of any tables that are already in the Oracle GoldenGate configuration.
ADD SCHEMATRANDATA ensures replication continuity should DML ever occur on an object for which DDL has just been performed.
You can use ADD TRANDATA even when using ADD SCHEMATRANDATA if you need to use the COLS option to log any non-key columns, such as those needed for FILTER statements and KEYCOLS clauses in the TABLE and MAP parameters.
Additional requirements when using ADD TRANDATA
Besides table-level logging, minimal supplemental logging must be enabled at the database level in order for Oracle GoldenGate to process updates to primary keys and
chained rows. This must be done through the database interface, not through Oracle GoldenGate. You can enable minimal supplemental logging by issuing the following DDL
statement:
SQL> alter database add supplemental log data;
To verify that supplemental logging is enabled at the database level, issue the following statement:
SELECT SUPPLEMENTAL_LOG_DATA_MIN FROM V$DATABASE;
The output of the query must be YES or IMPLICIT. LOG_DATA_MIN must be explicitly set, because it is not enabled automatically when other LOG_DATA options are set.
If you required more details refer Oracle® GoldenGate Windows and UNIX Reference Guide 11g Release 2 (11.2.1.0.0)

How to load item level and location level member in demantra

This is in context where we are not using any integration of demantra with either Ebiz or E1 system.
Data is present in flat file.
As per i know, integration interface can only export the data for item level and location level but can not import data for these level.
the second thing i know is that when we create data model then load_data.bat file should have been created in Demand Planner/Desktop directory. But this didn't got created. So i am not able to use load_data.bat file for uploading data.
The third place ,i think is from worksheet thru edit method ( i am not sure about this).
But i want to upload the data in bulk for item level and location level. Can it be done without any customization i.e without creating any sql loader file etc ??

Hi Abhishek,
The standard practice to load data for items/ locations and sales is through the DATA MODEL definition only. One should use LOAD_DATA.BAT file in normal scenario for loading data into Demantra staging tables from tEXT files.
In case you are having trouble with loading data using LOAD_DATA.BAT file, then do the following:
- modify your DM definition to Data tables instead of flat files
- use SQL loader to upload data in correct format into Demantra's staging tables "T_SRC_XXX"
- Run EBS Full Download workflow to download data into demantra's main tables.
Integration interfaces should not be used to load basic sales data into Demantra.
Hope this helps.
Thanks
Raj
(http://oracledemantra.blogspot.com)

DIFFERENCE BETWEEN SINGLE LEVEL AND MULTI LEVEL COSTING

Sir,'
Please explain the difference between Single Level and Multi Level Costing in Detail
thanking You

While using material ledger, we can use the single level or multi-level price determination for valuation of inventory.
Procurement processes are used in Product Cost Controlling to determine procurement costs and to present those costs. Purchase Order, for example, is single-level procurement and Production is multilevel procurement.
Single-level material price determination calculates the periodic unit price for a material. The standard price and the cumulative single-level differences of the period are taken into account. Single-level material price determination takes into account the differences that arise directly when a material is procured.
Multilevel price determination calculates the periodic unit price for a material. The standard price, the single-level differences cumulated in the period, the differences between planned and actual prices, as well as input material differences (multilevel differences) are all taken into account.
Single-level material price determination is a prerequisite for Multi-level price determination.

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Dunning Old dinning level and dunning level

Hi experts,
I have one issue in dunning. the issue is where the dunning history for particular customer shows as old dunning level as 3 and dunning level as 2.
i have checked the customer master there is change in the dunning procdure. But the document and master data shows the correct dunning level with the new procdure.
so i didnt understand what is the OLD dunning level and dunning level for the same cusomer. the issue is only with one customer.
I have also checked with old procdure with same customer in table MHNK. there are some notices done. but how come the current invoice shows the old dunning level for the same invoice.
can any once explain me how to proceed.
Regards
Ashok

Hi
Thnks for the reply so we need to apply this note for making the old dunning level and dunning level makes equal after you run the program.
Also one more doubt, since i have observed that the dunning after the parameters entered. looks like this
Parameters were maintained
Dunning selection executed, job deleted
Dunning notice printed, job deleted.
the above doesnt means that they will update the old dunning level right.
Regards
Ashok

Split data of 1st shift and 2nd shift

Hi,
I have an SSRS report that displayed the production data. It consist of data from 1st-Shift and 2nd-Shift . My SSRS has a parameter with FromDate and Todate, Time. the default date is today's date. My requirements is to
obtain the data of 1st shift and 2nd shift on the same day and displayed into one report with separate column for 1st shift and 2ns shift. The 1st shift is always start at 6:00AM and end at 2:00PM while the 2nd shift start at 2:00PM and end at 10:00PM
Btw, This report is run every hour. THe objective is to gather how the production perform.
Any help is very much appreciated. Thanks
Sample DDL
Create table #sample
(ID nvarchar(5), DateandTime datetime, qty int)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 00:33:18.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 05:20:57.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-29 23:09:33.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 03:45:08.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 04:53:55.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:00:06.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:15:41.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 06:07:08.000',1)
Declare @timezoneOffset int, @D1 datetime, @D2 datetime, @Stime nvarchar(8), @ETime nvarchar(8),@FromDatetime datetime, @ToDatetime datetime
Set @timezoneOffset=8
Set @D1='2014-05-30'
Set @D2='2014-05-30'
set @Stime='06:00 AM'
set @Etime='02:00 PM'
Set @FromDatetime= @D1 +''+@Stime
Set @ToDatetime= @D2 +''+@Etime
SELECT *
FROM #sample
WHERE DATEADD(HOUR,convert(int,@timezoneOffset), dateandtime) BETWEEN (@Fromdatetime) AND (@ToDatetime)

May I ask you assistance to fix this error.
i wanted this code to have a timezoneoffset.
Also , i would like to ask if this is acceptable in between 6:00 and 16:00, if more than 16:00 (this is 4:00PM) this would be now under shift 2.
case when DATEPART(hour,DateandTime)
between 6 and
16 then 1
else 2 end
as shiftID,
I tried trid this but got an error:
CASE WHEN DATEADD(HOUR,convert(int,@timezoneOffset), DateandTime)
between 6 and
16 then 1
else 2 end
as shiftID2

What are Header Level, Item Level and Schedule Level data?

Hi ,
Can anyone plz explain me what are Header Level, Item Level and Schedule Level Data in the R/3 system , means what actually is the data structure they contain. If is there any document or links available plz do send. Urgent.
Thanks
Prashant singhal

Hi Prashant,
check this link.
[Extractors;
Regards,
Harold.

[svn] 696: Added package level and class level javadoc, where is was missing.

Revision: 696
Author: [email protected]
Date: 2008-02-29 11:49:08 -0800 (Fri, 29 Feb 2008)
Log Message:
Added package level and class level javadoc, where is was missing.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AnonymousObjectGraph.jav a
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Array.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtEmbed.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtResource.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/LineNumberMapped.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Model.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MovieClip.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Primitive.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Script.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/XML.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/XMLList.java
Added Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/package.html

Hi,
The javadoc is generated to directory /home/usr/doc and I have added a package.html as mentioned. But no change found.
There is also no package directory in the /doc.
My original problem is that in the index.html, there are three frames, the right hand side frame showing the overwiew. In the overview page, there is the table of packages with two columns, the left columns showing the package name, while the right column showing blank.
How to generate comments to the right column in the table in the right hand side frame in the index.html?
Thanks,
Wing

1st Gen and 2nd Gen - help me?

Ok so i'm confused here...
The 1st gen and 2nd gen iPod touches both have the same 128mb of RAM yes...
So why is it that the 1st gen is apparently incapable of running iOS 4?
Yes, i understand that multi-tasking, and wallpapers(?) are too memory-intensive for the devices with such a small amount of RAM.
But come on, surely something like folders isn't totally 100% impossible for the 1st gen??
I know that the second gen is running @ 121Hz faster than the first but i would've thought that folders require the use of the memory over the processor?

I make no judgements about whether these devices are iOS 4 capable or not. Nor do I offer an opinion about the policy of which devices do, and which do not, upgrade. Nevertheless, it is Apple's policy, and I unfortunately I don't think you're gonna get the answer you seek here... Sorry.
You could try a Genius Bar or AppleCare, but only if you seek a Monty Python-style ‘Argument Clinic’...

Count at bin level and quant level?

what is the difference between cycle count at bin level and quant level?
Thx

If you use cycle counting inventory at quant level, the system does not set the inventory block for the entire storage bin. It sets the block instead for the quant to be inventoried.
You count only the selected materials, not all materials in the storage bin. If you manage storage bins with mixed storage, these storage bins are accessible for stock movements with other quants.
There can be open transfer orders for all materials that were not flagged for cycle counting in the inventory document. You can also create transfer orders for these materials during the inventory.
The system saves the inventory data at quant level.
In a stock movement, if you move a quant from one storage bin to another, the system deletes the quant in the source storage bin and creates a new quant in the destination storage bin.
Because the system stores the inventory data for the cycle counting inventory at quant level in the quant data, any inventory data that you previously entered is lost in this type of stock transfer.

Difference b/w mat level and Sku level in AFS

hi
in AFS terminology what does the term material level and SKU level mean? and what does SKU valve mean?

Hi
AFS materials are attached with Grids in which using characteristics ,dimensional values are entered.
Ex Shirt is manufactured in different sizes say L,XL,S,M and colours say blue,green and white.
Size and colour as used as dimensions(characters)and l,xl,blue... used as dimensional values.
If stock of shirt is say 25 pcs.out of which L Blue is 10 and XL green is 15 pcs.
When we note stock at material level ,we say as 25
at Grid level we say L BLUE shirt is 10 pcs which SKU level.
Hope I am clear.
Regards,
Raj.K

Infoobject for technical level and professionel level

Now, we want to create infoobject for technical level (e.g. high, middle, primary) and professionel level(e.g. high, middle, primary), should we create these kind of infoobject with time dependent, e.g. let's say, last year person A has technical level with middle, but this year start person A was promoted to high level.
1) should we consider about this kind of infoobjects with time dependent?
2) should we make 0datefrom and 0dateto as attr. of infoobject technical level and professionel level?
which idea is correct? Pls share your experience. Thanks!
Edited by: hi ni on Apr 19, 2008 5:37 AM

Hi Nilesh,
For overall release, please tick the overall release indicator for the PR document type.
Path > MM>PUR>PR>Define Document Types. For the particular document type tick the overall release indicator.
This can be done to the particular release group as well
Path->MM>PUR>PR>Release Procedure>Procedure with Classification>Set Up Procedure with Classification. For the particular release group tick the Overall release indicator.
Regards,
Raj

Capture Excise on Purchase through 1st Level and 2nd Level

Similar Messages

Maybe you are looking for