Capture image - 0xc0000000f
I'm currently trying to capture two different images onto my imaging server using Windows Deployment Services on a Windows Server 2012 Standard, with the latest updates. When booting to PXE and selecting the capture image (which is from Windows 8.1 media)
it crashes into the Windows Boot Manager and gives the status error of 0xc000000f. I've tried reloading the capture image with the same thing, the boot image from just fine for deployment. I've tried capturing from Windows 7, 8, and 8.1 with zero success.
This started occuring once I replaced the boot and capture images with the Windows 8.1 boot.wim.
Any suggestions?
Hi，
First I ‘d like to know where did you get the DVD installation media?
If it is a Windows 8.1 update1, please do not use it as a boot image of the deployment, because it contains the PE5.1.
I suggest to use a lower edition PE, PE5.0, that’s to say use another Windows DVD installation to get the boot.wim file.
We will keep track of this issue and report it.
Regards
v-yamliu
Similar Messages
-
Unable to capture image using MDT 2012
After running my Sysprep and Capture task using MDT 2012, MDT begins to capture the image and makes it all the way to ~94% and then stops and returns several errors. Any idea as to what may be causing this? Below are the errors returned during the capture
task and the ZTIBackup.log:
Error creating an image of drive C:, re=2
ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Create WIM.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The execution of the group (capture Image) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Create WIM. Execution of task sequence failed.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
ZTIBackup.log:
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context=""
type="1" thread="" file="ZTIBackup">
<![LOG[OriginalPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup"
context="" type="1" thread="" file="ZTIBackup">
<![LOG[Search for Drive: OriginalPartitionIdentifier SELECT * FROM Win32_LogicalDisk WHERE Size = '299999686656' and VolumeName = '' and VolumeSerialNumber = '2A688632']LOG]!><time="14:01:12.000+000" date="08-15-2014"
component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Found Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property OSDisk is now = C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[BackupDrive not specified searching for backup drive]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[BackupDrive defaulting to Destination Logical Drive: C:]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Checking to see if we can store the backup locally]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Drive C: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Local store path = C:\StateStore]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Total used space: 160595120]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Available space at C:\StateStore: 132373320]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Local store not permitted]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Network store path set to blank]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Network store path set to: \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Backup file name already set to: CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Using the backup path: \\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Validating connection to \\OCS-MDT\CCBShare$\Captures]LOG]!><time="14:01:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Already connected to server OCS-MDT as that is where this script is running from.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[Beginning backup of drive C:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[About to run command: "\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE]LOG]!><time="14:01:13.000+000"
date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Command has been started (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1568)]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > ImageX Tool for Windows]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Files/folders excluded from image capture by default:]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$windows.~bt]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$windows.~ls]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \winpepge.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Windows\CSC]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Recycled]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \Recycler]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \$Recycle.Bin\*]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \System Volume Information]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \pagefile.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > \hiberfil.sys]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Turning on VERIFY option for network share]LOG]!><time="14:01:13.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > Scanning files and directories...]LOG]!><time="14:01:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 0% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 17 minutes (process ID 1568)]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 1% ] Capturing progress ]LOG]!><time="14:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 2% ] Capturing progress: 2:22:22 hrs remaining ]LOG]!><time="14:21:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 3% ] Capturing progress: 2:23:19 hrs remaining ]LOG]!><time="14:22:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 4% ] Capturing progress: 2:23:01 hrs remaining ]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 23 minutes (process ID 1568)]LOG]!><time="14:24:11.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 5% ] Capturing progress: 2:39:46 hrs remaining ]LOG]!><time="14:27:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 6% ] Capturing progress: 2:43:14 hrs remaining ]LOG]!><time="14:28:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 7% ] Capturing progress: 2:43:42 hrs remaining ]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 29 minutes (process ID 1568)]LOG]!><time="14:30:39.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 8% ] Capturing progress: 2:41:26 hrs remaining ]LOG]!><time="14:32:08.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 9% ] Capturing progress: 2:43:24 hrs remaining ]LOG]!><time="14:34:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 10% ] Capturing progress: 2:41:57 hrs remaining ]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 35 minutes (process ID 1568)]LOG]!><time="14:36:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 11% ] Capturing progress: 2:38:33 hrs remaining ]LOG]!><time="14:37:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 12% ] Capturing progress: 2:35:51 hrs remaining ]LOG]!><time="14:39:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 13% ] Capturing progress: 2:33:30 hrs remaining ]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 40 minutes (process ID 1568)]LOG]!><time="14:41:00.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 14% ] Capturing progress: 2:30:39 hrs remaining ]LOG]!><time="14:42:28.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 15% ] Capturing progress: 2:28:39 hrs remaining ]LOG]!><time="14:44:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 16% ] Capturing progress: 2:28:06 hrs remaining ]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 45 minutes (process ID 1568)]LOG]!><time="14:46:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 17% ] Capturing progress: 2:30:58 hrs remaining ]LOG]!><time="14:50:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 18% ] Capturing progress: 2:42:16 hrs remaining ]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 56 minutes (process ID 1568)]LOG]!><time="14:57:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 19% ] Capturing progress: 2:55:09 hrs remaining ]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 62 minutes (process ID 1568)]LOG]!><time="15:03:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 20% ] Capturing progress: 3:03:46 hrs remaining ]LOG]!><time="15:07:09.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 21% ] Capturing progress: 3:10:17 hrs remaining ]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 70 minutes (process ID 1568)]LOG]!><time="15:11:41.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 22% ] Capturing progress: 3:12:08 hrs remaining ]LOG]!><time="15:13:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 23% ] Capturing progress: 3:11:13 hrs remaining ]LOG]!><time="15:15:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 24% ] Capturing progress: 3:08:56 hrs remaining ]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 76 minutes (process ID 1568)]LOG]!><time="15:17:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 25% ] Capturing progress: 3:06:17 hrs remaining ]LOG]!><time="15:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 26% ] Capturing progress: 3:03:27 hrs remaining ]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 81 minutes (process ID 1568)]LOG]!><time="15:22:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 27% ] Capturing progress: 3:00:07 hrs remaining ]LOG]!><time="15:24:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 28% ] Capturing progress: 2:56:19 hrs remaining ]LOG]!><time="15:25:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 29% ] Capturing progress: 2:54:19 hrs remaining ]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 89 minutes (process ID 1568)]LOG]!><time="15:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 30% ] Capturing progress: 2:52:44 hrs remaining ]LOG]!><time="15:32:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 31% ] Capturing progress: 2:50:14 hrs remaining ]LOG]!><time="15:34:29.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 32% ] Capturing progress: 2:47:25 hrs remaining ]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 95 minutes (process ID 1568)]LOG]!><time="15:36:38.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 33% ] Capturing progress: 2:44:17 hrs remaining ]LOG]!><time="15:38:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 34% ] Capturing progress: 2:40:58 hrs remaining ]LOG]!><time="15:40:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 35% ] Capturing progress: 2:37:40 hrs remaining ]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 101 minutes (process ID 1568)]LOG]!><time="15:42:17.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 36% ] Capturing progress: 2:34:21 hrs remaining ]LOG]!><time="15:44:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 37% ] Capturing progress: 2:31:09 hrs remaining ]LOG]!><time="15:46:18.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 38% ] Capturing progress: 2:28:17 hrs remaining ]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 107 minutes (process ID 1568)]LOG]!><time="15:48:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 39% ] Capturing progress: 2:25:45 hrs remaining ]LOG]!><time="15:51:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 40% ] Capturing progress: 2:23:10 hrs remaining ]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 112 minutes (process ID 1568)]LOG]!><time="15:53:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 41% ] Capturing progress: 2:20:18 hrs remaining ]LOG]!><time="15:54:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 42% ] Capturing progress: 2:17:13 hrs remaining ]LOG]!><time="15:56:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 43% ] Capturing progress: 2:14:21 hrs remaining ]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 118 minutes (process ID 1568)]LOG]!><time="15:59:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 44% ] Capturing progress: 2:11:48 hrs remaining ]LOG]!><time="16:01:55.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 45% ] Capturing progress: 2:09:52 hrs remaining ]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 126 minutes (process ID 1568)]LOG]!><time="16:07:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 46% ] Capturing progress: 2:09:09 hrs remaining ]LOG]!><time="16:10:37.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 47% ] Capturing progress: 2:08:08 hrs remaining ]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 131 minutes (process ID 1568)]LOG]!><time="16:12:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 48% ] Capturing progress: 2:06:21 hrs remaining ]LOG]!><time="16:15:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 49% ] Capturing progress: 2:04:12 hrs remaining ]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 136 minutes (process ID 1568)]LOG]!><time="16:17:26.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 50% ] Capturing progress: 2:01:44 hrs remaining ]LOG]!><time="16:20:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 51% ] Capturing progress: 1:59:26 hrs remaining ]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 141 minutes (process ID 1568)]LOG]!><time="16:22:36.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 52% ] Capturing progress: 1:57:05 hrs remaining ]LOG]!><time="16:24:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 53% ] Capturing progress: 1:54:22 hrs remaining ]LOG]!><time="16:26:15.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 54% ] Capturing progress: 1:51:34 hrs remaining ]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 147 minutes (process ID 1568)]LOG]!><time="16:28:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 55% ] Capturing progress: 1:48:56 hrs remaining ]LOG]!><time="16:30:23.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 56% ] Capturing progress: 1:46:05 hrs remaining ]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 152 minutes (process ID 1568)]LOG]!><time="16:33:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 57% ] Capturing progress: 1:43:42 hrs remaining ]LOG]!><time="16:35:25.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 58% ] Capturing progress: 1:41:18 hrs remaining ]LOG]!><time="16:37:12.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 59% ] Capturing progress: 1:38:41 hrs remaining ]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 157 minutes (process ID 1568)]LOG]!><time="16:38:57.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 60% ] Capturing progress: 1:36:02 hrs remaining ]LOG]!><time="16:40:19.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 61% ] Capturing progress: 1:33:11 hrs remaining ]LOG]!><time="16:41:53.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 62% ] Capturing progress: 1:30:13 hrs remaining ]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 162 minutes (process ID 1568)]LOG]!><time="16:43:58.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 63% ] Capturing progress: 1:27:20 hrs remaining ]LOG]!><time="16:46:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 64% ] Capturing progress: 1:24:48 hrs remaining ]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 168 minutes (process ID 1568)]LOG]!><time="16:49:52.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 65% ] Capturing progress: 1:22:51 hrs remaining ]LOG]!><time="16:51:34.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 66% ] Capturing progress: 1:20:36 hrs remaining ]LOG]!><time="16:52:56.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 67% ] Capturing progress: 1:17:48 hrs remaining ]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 174 minutes (process ID 1568)]LOG]!><time="16:55:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 68% ] Capturing progress: 1:15:29 hrs remaining ]LOG]!><time="16:56:51.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 69% ] Capturing progress: 1:12:55 hrs remaining ]LOG]!><time="16:58:32.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 70% ] Capturing progress: 1:10:29 hrs remaining ]LOG]!><time="16:59:44.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 71% ] Capturing progress: 1:07:56 hrs remaining ]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 179 minutes (process ID 1568)]LOG]!><time="17:00:45.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 72% ] Capturing progress: 1:05:07 hrs remaining ]LOG]!><time="17:02:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 73% ] Capturing progress: 1:02:13 hrs remaining ]LOG]!><time="17:04:24.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 74% ] Capturing progress: 59:21 mins remaining ]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 186 minutes (process ID 1568)]LOG]!><time="17:07:21.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 75% ] Capturing progress: 57:19 mins remaining ]LOG]!><time="17:08:59.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 76% ] Capturing progress: 54:21 mins remaining ]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 191 minutes (process ID 1568)]LOG]!><time="17:12:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 77% ] Capturing progress: 52:42 mins remaining ]LOG]!><time="17:14:16.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 78% ] Capturing progress: 50:16 mins remaining ]LOG]!><time="17:16:48.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 79% ] Capturing progress: 48:22 mins remaining ]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 197 minutes (process ID 1568)]LOG]!><time="17:18:10.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 80% ] Capturing progress: 46:27 mins remaining ]LOG]!><time="17:18:47.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 81% ] Capturing progress: 44:11 mins remaining ]LOG]!><time="17:19:20.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 82% ] Capturing progress: 41:31 mins remaining ]LOG]!><time="17:20:31.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 83% ] Capturing progress: 38:07 mins remaining ]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 202 minutes (process ID 1568)]LOG]!><time="17:23:49.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 84% ] Capturing progress: 35:48 mins remaining ]LOG]!><time="17:26:06.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 85% ] Capturing progress: 33:25 mins remaining ]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 207 minutes (process ID 1568)]LOG]!><time="17:28:43.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 86% ] Capturing progress: 31:18 mins remaining ]LOG]!><time="17:30:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 87% ] Capturing progress: 29:37 mins remaining ]LOG]!><time="17:31:54.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 88% ] Capturing progress: 27:55 mins remaining ]LOG]!><time="17:32:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 89% ] Capturing progress: 25:04 mins remaining ]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 213 minutes (process ID 1568)]LOG]!><time="17:34:07.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ Console > [ 90% ] Capturing progress: 22:52 mins remaining ]LOG]!><time="17:35:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 91% ] Capturing progress: 20:47 mins remaining ]LOG]!><time="17:36:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 92% ] Capturing progress: 18:33 mins remaining ]LOG]!><time="17:37:14.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 93% ] Capturing progress: 16:14 mins remaining ]LOG]!><time="17:38:22.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ Console > [ 94% ] Capturing progress: 13:54 mins remaining ]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread=""
file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 218 minutes (process ID 1568)]LOG]!><time="17:39:40.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI Heartbeat: command has been running for 224 minutes (process ID 1568)]LOG]!><time="17:45:04.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Return code from command = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Error creating an image of drive C:, rc = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
<![LOG[ZTIBackup COMPLETED. Return Value = -1073741819]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = -1073741819 0xC0000005]LOG]!><time="17:45:05.000+000" date="08-15-2014" component="ZTIBackup" context="" type="3" thread=""
file="ZTIBackup">Not sure what's going on here. Possibly a corrupt drive? Or the target drive is full?
Try running the imagex command manually from a F8 cmd window (in WinPE)
"\\OCS-MDT\CCBShare$\Tools\X64\imagex.exe" /capture /compress maximum C: "\\OCS-MDT\CCBShare$\Captures\CCB01-8_15_14.wim" "CCB01CDrive" /flags ENTERPRISE
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Unable to capture images since upgrade to MDT 2013
I recently updated MDT 2012 to MDT 2013 to enable support for Windows 8.1. Under MDT 2012 I was able to both capture and deploy images without an issue. Since upgrading to MDT 2013 I've had nothing but grief. When I launch my Sysprep and Capture task I am
returned with the following error:
Error creating an image of drive D:, rc=2ZTI ERROR -Non-zero return code by ZTIBackup, rc=2Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Create WIM.
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The execution of the group (Capture Image) has failed and the execution has been aborted.
An action failed.
Operation aborted (Error: 80004004; Source Windows)
Failed to run the last action Create WIM. Execution of task sequence failed.
The system cannot find the file specified. (Error 00000002; Source: Windows)
Task Sequence Engine Failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error TAsk Sequence Manager failed to execute task sequence. Code 0x80004005
Once the machine boots up again I check the BDD log located in C:\Windows\Temp\DeploymentLogs and notice the following error:
<![LOG[ Console > Error opening file [\\rmh-vm-mdt2012\DeploymentShare$\Captures\WINDOWS.8.1.REF.wim].]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1"
thread="" file="ZTIBackup">
<![LOG[ Console > Access is denied. ]LOG]!><time="10:23:55.000+000" date="02-06-2014" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
My issue appears to be a permissions problem. For troubleshooting purposes I've given Everyone full access to \DeploymentShare$ however the problem continues to persist.
I'm not sure where to go from here. Hoping someone can help.
Thanks.Additionally, ensure that the share itself is marked R/W access.
As a test, boot to WinPE and try to create a file, any file on the share.
However, Lordy86 may have the correct solution :^).
Keith Garner - keithga.wordpress.com -
WDS capture image on a Windows 2012 R2 server fails with a winload error
Hello,
I have been fighting with this problem for days now. I have to install
30 Win8.1 Pro PC's with WDS. The WDS service is running on a Win2012 R2
server. I added the Win 8.1 Pro boot and install images and created a capture image.
Now when I boot the reference computer I get a Boot Manager message saying that winload.exe is missing or corrupt. The original boot wim works
correctly.I removed and added the WDS role a couple of times, I tried the procedure with a 32 bit Win7 boot image, and that worked, But when I added the capture image created from the original Win8.1 boot.wim, that spoiled both capture images. I tried
the same thing with a Win2012 R2 Standard server after removing and adding the WDS role again, but the capture image generated the same error as above. .I see that since about mid-April many people has the same problem.Different solutions are suggested, but
none of them worked for me. One of them is to mount and unmount the capture image, that didn't help for me.
Any help is appreciated.
Thanks
GaborDo I understand correctly that if you deploy original wim file to your testPC1 it works all right, but if you deploy an image that you captured on buildPC to testPC1 then you get the winload.exe error ?
Are you formatting (deleting all the partitions) on testPC1 during the
deployment of captured image ? Can you check and confirm if the HDD seting for AHCI or IDE (yes, its still around) is the same option on both stations? -
Capture images (JPEG) from IP-Camera
Hey there!
I have been trying to capture images from an IP-Camera. I understand that this has to be done by using a custom DataSource and I have tried many many example found here on the net, but with no results.
I think I've tried every piece of code found here at this forum regarding this subject.. :/
The best I could do was not getting an error while creating a custom DataSource from a BufferedStream..but the when I try to configure/realize the Processor - created with Manager.createProcessor(customdatasource) - it gives me an error which, I think, has something to do with unrecognized content..
I could post all the examples I tried but I think it would be too much of a confusion so...does anyone have a full working example of code to achieve this? WITH the frame grabber class? plizzzzzzzzz?
Thanks,
EddI felt Captfoss' solution was inspired and so gave it a go. The following builds a video from an ip cam jpg stream using a version of Sun's JpegImagesToMovie.java. It is hacked together quickly and with scope for improvement, but it works, proves the idea, and is a good example.
Run as:- java JpegImagesToMovie -w 320 -h 240 -f 30 -o file:test.avi
* @(#)JpegImagesToMovie.java 1.3 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
* Some public domain modifications by Andy Dyble for avi etc by self and from
* other internet resources 19/11/2008. Reads editable 20 ip cam network jpg files.
* Supported formats tested for compression options. This code could be much improved
* further to these amendments. Absolutely no warranties. www.exactfutures.com
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
import javax.media.format.JPEGFormat;
* This program takes a list of JPEG image files and convert them into
* a QuickTime movie.
public class JpegImagesToMovie implements ControllerListener, DataSinkListener {
public boolean doIt(int width, int height, int frameRate, Vector inFiles, MediaLocator outML, String outputURL)
ImageDataSource ids = new ImageDataSource(width, height, frameRate, inFiles);
Processor p;
try {
System.err.println("- create processor for the image datasource ...");
p = Manager.createProcessor(ids);
} catch (Exception e) {
System.err.println("Yikes! Cannot create a processor from the data source.");
return false;
p.addControllerListener(this);
// Put the Processor into configured state so we can set
// some processing options on the processor.
p.configure();
if (!waitForState(p, p.Configured)) {
System.err.println("Failed to configure the processor.");
return false;
// Set the output content descriptor to QuickTime.
if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI"))
p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.MSVIDEO));
if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.QUICKTIME));
// Query for the processor for supported formats.
// Then set it on the processor.
TrackControl tcs[] = p.getTrackControls();
for(int i=0;i<tcs.length;i++)
System.out.println("TrackControl "+i+" "+tcs);
Format f[] = tcs[0].getSupportedFormats();
if (f == null || f.length <= 0) {
System.err.println("The mux does not support the input format: " + tcs[0].getFormat());
return false;
for(int i=0;i<f.length;i++)
System.out.println("Supported Format "+i+" "+f[i]);
// tcs[0].setFormat(f[0]);
if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI")) // must be VideoFormat
System.err.println("Setting the track format to: " // INDEO50 CINEPAK f[0] etc
+ tcs[0].setFormat(new VideoFormat(VideoFormat.INDEO50)));
if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
System.err.println("Setting the track format to: " // JPEG CINEPAK RGB f[0] etc
+ tcs[0].setFormat(new VideoFormat(VideoFormat.JPEG)));
//System.err.println("Setting the track format to: " + f[0]);
// We are done with programming the processor. Let's just
// realize it.
p.realize();
if (!waitForState(p, p.Realized)) {
System.err.println("Failed to realize the processor.");
return false;
// Now, we'll need to create a DataSink.
DataSink dsink;
if ((dsink = createDataSink(p, outML)) == null) {
System.err.println("Failed to create a DataSink for the given output MediaLocator: " + outML);
return false;
dsink.addDataSinkListener(this);
fileDone = false;
System.err.println("start processing...");
// OK, we can now start the actual transcoding.
try {
p.start();
dsink.start();
} catch (IOException e) {
System.err.println("IO error during processing");
return false;
// Wait for EndOfStream event.
waitForFileDone();
// Cleanup.
try {
dsink.close();
} catch (Exception e) {}
p.removeControllerListener(this);
System.err.println("...done processing.");
return true;
* Create the DataSink.
DataSink createDataSink(Processor p, MediaLocator outML) {
DataSource ds;
if ((ds = p.getDataOutput()) == null) {
System.err.println("Something is really wrong: the processor does not have an output DataSource");
return null;
DataSink dsink;
try {
System.err.println("- create DataSink for: " + outML);
dsink = Manager.createDataSink(ds, outML);
dsink.open();
} catch (Exception e) {
System.err.println("Cannot create the DataSink: " + e);
return null;
return dsink;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(Processor p, int state) {
synchronized (waitSync) {
try {
while (p.getState() < state && stateTransitionOK)
waitSync.wait();
} catch (Exception e) {}
return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
evt.getSourceController().stop();
evt.getSourceController().close();
Object waitFileSync = new Object();
boolean fileDone = false;
boolean fileSuccess = true;
* Block until file writing is done.
boolean waitForFileDone() {
synchronized (waitFileSync) {
try {
while (!fileDone)
waitFileSync.wait();
} catch (Exception e) {}
return fileSuccess;
* Event handler for the file writer.
public void dataSinkUpdate(DataSinkEvent evt) {
if (evt instanceof EndOfStreamEvent) {
synchronized (waitFileSync) {
fileDone = true;
waitFileSync.notifyAll();
} else if (evt instanceof DataSinkErrorEvent) {
synchronized (waitFileSync) {
fileDone = true;
fileSuccess = false;
waitFileSync.notifyAll();
public static void createInputFiles(Vector files)
// Create a file for the directory
File file = new File("images");
// Get the file list...
String s[] = file.list();
files.removeAllElements(); // if any set from arguments
for(int i=0;i<s.length;i++)
if(s[i].indexOf(".jp")!=-1)
files.addElement("images"+File.separator+s[i]); // and to sort if required
else
System.out.println((i+1)+": "+s[i]+" - ignored");
public static void main(String args[]) {
if (args.length == 0)
prUsage();
// Parse the arguments.
int i = 0;
int width = -1, height = -1, frameRate = 1;
Vector inputFiles = new Vector();
String outputURL = null;
while (i < args.length) {
if (args[i].equals("-w")) {
i++;
if (i >= args.length)
prUsage();
width = new Integer(args[i]).intValue();
} else if (args[i].equals("-h")) {
i++;
if (i >= args.length)
prUsage();
height = new Integer(args[i]).intValue();
} else if (args[i].equals("-f")) {
i++;
if (i >= args.length)
prUsage();
frameRate = new Integer(args[i]).intValue();
} else if (args[i].equals("-o")) {
i++;
if (i >= args.length)
prUsage();
outputURL = args[i];
} else {
inputFiles.addElement(args[i]);
i++;
/// createInputFiles(inputFiles);
if (outputURL == null)// || inputFiles.size() == 0)
prUsage();
// Check for output file extension.
if(!outputURL.endsWith(".avi") && !outputURL.endsWith(".AVI") && !outputURL.endsWith(".mov") && !outputURL.endsWith(".MOV"))
System.err.println("The output file extension should end with a .mov extension");
prUsage();
if (width < 0 || height < 0) {
System.err.println("Please specify the correct image size.");
prUsage();
// Check the frame rate.
if (frameRate < 1)
frameRate = 1;
// Generate the output media locators.
MediaLocator oml;
if ((oml = createMediaLocator(outputURL)) == null) {
System.err.println("Cannot build media locator from: " + outputURL);
System.exit(0);
JpegImagesToMovie imageToMovie = new JpegImagesToMovie();
imageToMovie.doIt(width, height, frameRate, inputFiles, oml, outputURL);
System.exit(0);
static void prUsage() {
System.err.println("Usage: java JpegImagesToMovie -w <width> -h <height> -f <frame rate> -o <output URL>");// <input JPEG file 1> <input JPEG file 2> ...");
System.exit(-1);
* Create a media locator from the given string.
static MediaLocator createMediaLocator(String url) {
MediaLocator ml;
if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
return ml;
if (url.startsWith(File.separator)) {
if ((ml = new MediaLocator("file:" + url)) != null)
return ml;
} else {
String file = "file:" + System.getProperty("user.dir") + File.separator + url;
if ((ml = new MediaLocator(file)) != null)
return ml;
return null;
// Inner classes.
* A DataSource to read from a list of JPEG image files and
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
class ImageDataSource extends PullBufferDataSource {
ImageSourceStream streams[];
ImageDataSource(int width, int height, int frameRate, Vector images) {
streams = new ImageSourceStream[1];
streams[0] = new ImageSourceStream(width, height, frameRate, images);
public void setLocator(MediaLocator source) {
public MediaLocator getLocator() {
return null;
* Content type is of RAW since we are sending buffers of video
* frames without a container format.
public String getContentType() {
return ContentDescriptor.RAW;
public void connect() {
public void disconnect() {
public void start() {
public void stop() {
* Return the ImageSourceStreams.
public PullBufferStream[] getStreams() {
return streams;
* We could have derived the duration from the number of
* frames and frame rate. But for the purpose of this program,
* it's not necessary.
public Time getDuration() {
return DURATION_UNKNOWN;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
* The source stream to go along with ImageDataSource.
class ImageSourceStream implements PullBufferStream {
Vector images;
int width, height;
VideoFormat format;
int nextImage = 0; // index of the next image to be read.
boolean ended = false;
float frameRate;
long seqNo = 0;
public ImageSourceStream(int width, int height, int frameRate, Vector images) {
this.width = width;
this.height = height;
this.images = images;
this.frameRate = (float)frameRate;
format = new VideoFormat(VideoFormat.JPEG,
new Dimension(width, height),
Format.NOT_SPECIFIED,
Format.byteArray,
(float)frameRate);
* We should never need to block assuming data are read from files.
public boolean willReadBlock() {
return false;
byte[] input_buffer;
byte[] imgbytearray;
byte[] imgusebyte;
int camWidth = 320;
int camHeight = 240;
URL url;
long timeStamp;long timeStamp0=System.currentTimeMillis();long resultTimeStamp;
public boolean urlFetchJPG()
String ipcamserver = "146.176.65.10"; // examples 146.176.65.10 , 62.16.100.204 , 194.168.163.96 , 84.93.217.139 , 194.177.131.229 , 148.61.171.201
try
url = new URL("http://"+ipcamserver+"/axis-cgi/jpg/image.cgi?camera=&resolution=320x240".trim());
catch(Exception e){System.out.println("Exception url "+e);}
try
if(input_buffer==null)input_buffer = new byte[8192];
if(imgbytearray==null)imgbytearray = new byte[camWidth*camHeight*3];
URLConnection uc = url.openConnection();
uc.setUseCaches(false);
//uc.setDoInput(true);
//uc.setRequestProperty("accept","image/jpeg,text/html,text/plain");
BufferedInputStream in;
int bytes_read;
int sumread=0;
in = new BufferedInputStream(uc.getInputStream());
while((bytes_read=in.read(input_buffer, 0, 8192))!=-1)
if(sumread+bytes_read>imgbytearray.length)
byte[] imgbytearraytemp = new byte[sumread+bytes_read+8192];
System.arraycopy(imgbytearray,0,imgbytearraytemp,0,imgbytearray.length);
System.arraycopy(input_buffer,0,imgbytearray,sumread,bytes_read);
sumread=sumread+bytes_read;
in.close();
imgusebyte = new byte[sumread];
System.arraycopy(imgbytearray,0,imgusebyte,0,sumread);
catch(Exception e){System.out.println("Exception urlFetchJPG "+e);}
return true;
* This is called from the Processor to read a frame worth
* of video data.
public void read(Buffer buf) throws IOException {
// Check if we've finished all the frames.
if (nextImage >= 20) //images.size())
// We are done. Set EndOfMedia.
System.err.println("Done reading all images.");
buf.setEOM(true);
buf.setOffset(0);
buf.setLength(0);
ended = true;
return;
/// String imageFile = (String)images.elementAt(nextImage);
nextImage++;
// System.err.println(" - reading image file: " + imageFile);
// Open a random access file for the next image.
/// RandomAccessFile raFile;
/// raFile = new RandomAccessFile(imageFile, "r");
byte data[] = null;
// Check the input buffer type & size.
/// if (buf.getData() instanceof byte[])
/// data = (byte[])buf.getData();
urlFetchJPG();
data = imgusebyte;
// Check to see the given buffer is big enough for the frame.
/// if (data == null || data.length < raFile.length()) {
/// data = new byte[(int)raFile.length()];
buf.setData(data);
// Read the entire JPEG image from the file.
/// raFile.readFully(data, 0, (int)raFile.length());
// System.err.println(" read " + raFile.length() + " bytes.");
buf.setOffset(0);
/// buf.setLength((int)raFile.length());
buf.setLength(data.length);
buf.setFormat(format);
buf.setFlags(buf.getFlags() | buf.FLAG_KEY_FRAME);
/// long time = (long)(seqNo * (1000D / frameRate) * 1000000);
timeStamp = System.currentTimeMillis();
resultTimeStamp = timeStamp - timeStamp0;
long time = resultTimeStamp * 0xf4240L;
buf.setTimeStamp(time);
buf.setSequenceNumber(seqNo++);
// Close the random access file.
/// raFile.close();
* Return the format of each video frame. That will be JPEG.
public Format getFormat() {
return format;
public ContentDescriptor getContentDescriptor() {
return new ContentDescriptor(ContentDescriptor.RAW);
public long getContentLength() {
return 0;
public boolean endOfStream() {
return ended;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
{code} -
Administrator account is disable when deploying windows 7 x64 captured image
I’m using MDT 2012 update 1. I create one deployment share with two task sequence.
The task sequences are: one for windows 7 x86 and the other one is windows 7 x64.
Both are working fine until I try to sysprep and capture with all the windows updates.
Sysprep and capture windows 7 x86 with all windows update work fine. I’m able to deploy the captured image without an error.
My problem is with the windows 7 x64 captured image. I’m able to sysprep and capture the windows7 x64 with all the windows update. Once the capture is completed, I change the .win file in my windows 7 x64 task sequence to point to the new .win file (capture
image with all the windows update). When I deploy windows 7 x64 on a pc, the OS get install but boot up to the sign on screen. The Task sequence does not complete. No error message. Cannot log in as local or domain administrator, account is disable.
Why does it work with my windows 7 x86 image and not with my windows 7 x64 image?
With my windows 7 x86 image the task sequence completed successfully with no error and it logon automatically in windows but not with my windows 7 x64 image.
Both task sequences are the same.
Let me know if any info for this please.
thanksThey should both work, perhaps you missed a step when creating the x64 image.
1. Verify that the Windows 7 x64 image was created cleanly, with no errors. Sysprep ran with no errors.
2. Verify that you created the windows 7 deployment task sequence cleanly. I would do a windiff of the TS.xml and unattend.xml file from both folders in the deployment share.
3. Try running without a domain. Some domain's have a GP set to disable the local administrator account.
Keith Garner - keithga.wordpress.com -
Labview IMAQ VI for capturing images and saving with incremental file names
Hello,
I am using LabView 7.1(IMAQ) to capture images with NI's PCI 1426 card, and a JAI CV-M2 camera. Now, with the example VI's like LL Grab, or LL Sequence, or Snap and Save to File.vi, I can capture the images. But what I actually want is to capture images continuously and keep saving them with a sequentially incrementing file name.
I have tried to modify the Snap and Save to File.vi by adding a 'for loop', so as to run this for required number of images. This works okay, but I can't really change the file name after every image. However, I'm not confident with this method either. I think it would be better to use the buffer itself, as is given in LL Grab.vi and somehow save images from the buffer. I think this would be faster ?
In any case, any ideas as to how I should go about implementing auto-incrementing of the file name ?
Any help will do.
Thanks.
- PrashantHi,
Thanks a lot for replying.
I tried using this in the VI i was working with, but using the "build path" vi doesnt seem to work. If I use just the base path from user's input, it works, but then again it keeps overwriting the images into one file rather than giving each file a new name. I'm attaching the vi.
Please take a look and tell me where i'm going wrong.
Thanks again.
Attachments:
LL Sequence_mod.vi 62 KB -
When you save an image, your captured image is bec...
I realize that when I take a picture picture from my 5800, ALL my saved images become foggy! According to preview (capture) image, preview images are NORMAL!... So I think the problem is about software based, not hardware! I have V20 firmware .... I hope Nokia may interest about this problem!...Will upcoming 5800's firmware solve this problem?...
Thanks.
Nokia 5800 XpressMusic
v20.0.012It always is to start with. Keep the image displayed for a few seconds and while it's up on the screen, the phone will render a sharper version and display it eventually.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?
Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider -
Hello Sir and Maam!
i am an engineering student. i have a problem, i want to take pictures form labview using my built in camera in my laptop. I have read many discussions hwo to use it.. I downloaded Ni Imaq, Visa, Vision Assistant too but in the end my built in camera is not supported to capture images. I need to do it but after searching some cameras that Labview is compatible it is too much costy for me.
to make that story short i found an example program that makes me allow to use of my built in camera. I'll attatch it here. But i want to ask a favor on how to add some codes to capture image. it is just using a express vi.
I'll attatch the code! tnx maam and sir!
-hoping for your help
Example Grab Express.vi
Solved!
Go to Solution.
Attachments:
IMAQdx Express Examples.llb 482 KB
IMAQdx Express Examples.llb 482 KBMr_ask wrote:
Hello Sir and Maam!
i am an engineering student. i have a problem, i want to take pictures form labview using my built in camera in my laptop. I have read many discussions hwo to use it.. I downloaded Ni Imaq, Visa, Vision Assistant too but in the end my built in camera is not supported to capture images. I need to do it but after searching some cameras that Labview is compatible it is too much costy for me.
to make that story short i found an example program that makes me allow to use of my built in camera. I'll attatch it here. But i want to ask a favor on how to add some codes to capture image. it is just using a express vi.
I'll attatch the code! tnx maam and sir!
-hoping for your help
Example Grab Express.vi
check this vi i made to snap and save image. You can use MAX to get camera name or to configure them too.
Attachments:
camera snap.vi 52 KB -
AVCaptureDevice adjustingExposure is False but captured image is dark
The facetime camera is supposed to automatically set exposure but the adjustingExposure parameter of AVCaptureDevice is always "NO" and the observer is never called. So my app does not now when it's safe to capture the image.
I've described my code in more details on stackoverflow:
http://stackoverflow.com/questions/27260697/avcapturedevice-adjustingexposure-is -false-but-captured-image-is-darkYou may need to register your camera with the the launch service database again, see this post by Alan Roseman: Re: Aperture 3 preview of raw file greenish
There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
Good luck.
Post back, if this does not help.
Regards
Léonie -
Open camera and capture image using J2me.
please I want J2me code to open the mobile camera and capture image....
please reply me as quick as possible....(very urgent)...eng_amy wrote:
please I want J2me code to open the mobile camera and capture image....Well..
eng_amy wrote:
please reply me as quick as possible....(very urgent).....(checks watch) ..it's obviously too late. Never mind. -
Capture image after Sysprep w/generalize option...
Hello all. disclaimer...I'm more versed in IBM mainframe OSes but I can get around pretty good with Windows utils and concepts. But this is probably a noob kinda question ;-)
I'm in a work environment where i have an image that has already been customized. The default administrator has already been created. So typically when an image is laid down via WDS I can sign in with the default admin account with no issues. I am now trying
to capture this image after some required customizations. So i use Sysprep with the generalize option...BUT...here's my dilemma. I do not want to use OOBE. So how would I reseal the image under AUDIT before capture so that i may IMAGEX /APPLY my 'captured'
image to deliver the same default sign-on screen upon successful completion of the apply of the image? I wish for no OOBE Welcome screen nor an AUDIT SYSPREP screen where I have to cancel out of. I wish to come to the same sign-on environment that I would
come to had I just done a 'capture' with no SYSPREP involved.
I know that IMAGEX /CAPTURE without a SYSPREP /GENERALIZE usage would give me exactly what I want. However, I do need the unique identifiers removed from the image of the testing PC. So I do need SYSPREP /GENERALIZE functionality. Would I have to use
an unattend.xml to achieve this? And if so, what passes would be necessary? I am not that familiar with the unattend file. But I have been reading up on it.
I hope all of this makes clear sense. Any advice on how to proceed is greatly appreciated. Thanks.Yes, use an answer file with sysprep to fill out the OOBE information. Then the user will not see those screens after imaging. Here is an example XML i have handy.
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-us</UILanguage>
</SetupUILanguage>
<InputLocale>en-us</InputLocale>
<UILanguage>en-us</UILanguage>
<SystemLocale>en-us</SystemLocale>
<UILanguageFallback>en-us</UILanguageFallback>
<UserLocale>en-us</UserLocale>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ComputerName>*</ComputerName>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.google.com/</Home_Page>
<Help_Page>http://www.google.com/</Help_Page>
<DisableFirstRunWizard>true</DisableFirstRunWizard>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-us</SystemLocale>
<UILanguage>en-us</UILanguage>
<UserLocale>en-us</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Other</NetworkLocation>
<ProtectYourPC>3</ProtectYourPC>
</OOBE>
<UserAccounts>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Group>Administrators</Group>
<DisplayName>UserAccount</DisplayName>
<Name>UserAccount</Name>
<Password>
<Value>password</Value>
<PlainText>true</PlainText>
</Password>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog:c:/image creation/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend> -
Capture image into a PDF form?
Hi,
Is it somehow possible to capture an image from a digital camera/scanner etc. (over WIA) into a PDF form?Hi,
Designer ES doesnt have possibility to capture image from digital camera. You can create form from already existing PDF file with image.
To create this PDF you can use Adobe Acrobe 9 which has possibility to create pdf from Scanner.
BR,
Paul Butenko -
Files not showing captured images after belle upda...
after belle update i cant see the images i have captured with n8's camera in files(file manager of phone) even though i can see them in gallery.......only the captured images after update are not showing..does anybody else have the same problem..how could i resolve it?????
Solved!
Go to Solution.I have the similar problem after updating to Belle on my N8. My photos, previously taken with the phone are still somewhere on the memory card and are visible if I want to add them to the contact profile, but otherwise, can not locate them? Tried thru attach to e-mail, MMS, connected to PC and browsing .... It must be some hidden folder. Does anybody can help me? Thanks!
Maybe you are looking for
-
Imported Excel Sheet Rows won't UNHIDE
Imported basic checkbook type spreadsheet from Excel into Numbers. In original, left column has dates, but not every row -- some dates had multiple entries so several cells in column A were blank. When I imported all seemed to go okay... but then I n
-
Problems accessing JavaBeans classes in a JSP.
Hi, I have created some Javabeans �Product� and �ShoppingBasket� and compiled into their classes ok. I have created a JSP that uses these beans, however when I do a web run from Jbuilder4 I get a message saying it is unable to compile the class. I do
-
Dear Experts, In my production server I want after grn ( Expect GRn cancel )in any PO my user not able to delete po line itmes.How can it is possible. Pooja
-
hi 1.what is difference between operational data sources(ODS) & ODS Object? i'm still confused pls tell me ... 2.wt's the use of ods in reporting?
-
Immediate response requirement on smartforms
develop smartform,develop the driver program for details given below: Also dispaly the output using smartform. SELECTION SCREEN : Purchase order Number (EKKO-EBELN) Output : 1) Po Item Number (EKPO-EBELP) 2) Po Number (EKPO-EBELN) 3) material Number