Capture the file name in the payload from the SOAP payload

Hi ,
We have a scenario , a file to RFC , we need the file name which is coming the SOAP payload . This file name needs to be captured in the payload . Please tell me is there any way capture this .
Thanks
Anita

Anita,
If SP14 and above , do this,
Sender File adapter --> Adapter Specific Identifiers --> Select File name
Then in your mapping, you can use this piece of code to access / get the file name,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String FileName = conf.get(key);
Regards,
Bhavesh

Similar Messages

How is it posible to get the File name, size and type from a File out the H

How is it posible to get the File name, size and type from a File out the HttpServletRequest. I want to upload a File from a client and save it on a server with the client name. I want to conrole before saving the name, type and size of the file.How is it posible to get the File name, size and type from a File out the HttpServletRequest.
form JSP
<form name="form" method="post" action="procesuploading.jsp" ENCTYPE="multipart/form-data">
File: <input type="file" name="filename"/
Path: <input type="text" readonly="" name="path" value="c:"/
Saveas: <input type="text" name="saveas"/>
<input name="submit" type="submit" value="Upload" />
</form>
proces JSP
<%@ page language="java" %>
<%@ page import="java.util.*" %>
<%@ page import="FileUploadBean" %>
<jsp:useBean id="TheBean" scope="page" class="FileUploadBean" />
<%
TheBean.doUpload(request);
%>
BEAN
import java.io.*;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.ServletInputStream;
public class FileUploadBean {
public void doUpload(HttpServletRequest request) throws IOException
          String melding = "";
          String filename = request.getParameter("saveas");
          String path = request.getParameter("path");
          PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter("test.java")));
          ServletInputStream in = request.getInputStream();
          int i = in.read();
          System.out.println("filename:"+filename);
          System.out.println("path:"+path);
          while (i != -1)
               pw.print((char) i);
               i = in.read();
          pw.close();
}

Thanks it works great.
Here an excample from my code
import org.apache.commons.fileupload.*;
public class FileUploadBean extends Object implements java.io.Serializable{
String foutmelding = "geen";
String path;
String filename;
public boolean doUpload(HttpServletRequest request) throws IOException
     try
     // Create a new file upload handler
     FileUpload upload = new FileUpload();
     // Set upload parameters
     upload.setSizeMax(100000);
     upload.setSizeThreshold(100000000);
     upload.setRepositoryPath("/");
     // Parse the request
     List items = upload.parseRequest(request);
     // Process the uploaded fields
     Iterator iter = items.iterator();
     while (iter.hasNext())
     FileItem item = (FileItem) iter.next();
          if (item.isFormField())
               String stringitem = item.getString();
     else
          String filename = "";
               int temp = item.getName().lastIndexOf("\\");
               filename = item.getName().substring(temp,item.getName().length());
               File bestand = new File(path+filename);
               if(item.getSize() > SizeMax && SizeMax != -1){foutmelding = "bestand is te groot.";return false;}
               if(bestand.exists()){foutmelding ="bestand bestaat al";return false;}
               FileOutputStream fOut = new FileOutputStream(bestand);
               BufferedOutputStream bOut = new BufferedOutputStream(fOut);
               int bytesRead =0;
               byte[] data = item.get();
               bOut.write(data, 0 , data.length);
               bOut.close();
     catch(Exception e)
          System.out.println("er is een foutontstaan bij het opslaan de een bestand "+e);
          foutmelding = "Bestand opsturen is fout gegaan";
     return true;
     }

The file name is not valid. The file name is a device or contains invalid characters.

Hi ,
I am getting below error in SSIS 2008 package when it is run through control-m
The file name is not valid. The file name is a device or contains invalid characters.
component "FF_SRC_InboundFidelityInputFile" (1) failed the pre-execute phase and returned error code 0xC020207E.
although this package is working fine in dev environment from visual studio.
control-m agent has proper permissions to the folder still it is failing. Please if anyone knows solution for this issue. I am working on this issue since more than a week but reached nowhere. Please help.
Thanks
Paras Gupta

Hi Paras,
Based on your description, it is not the VS IDE issue, if it is related to the SSIS, I suggest you post the issue in this forum here:http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
, and there you would get better response.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG ‏69 KB

Setting up the File Name of email Attachment from Received File Name

Hello All,
I have to send the Received File in attachment to an Email if there is any exception. Here I can attach the file, but I cannot set the file name of attachment as the Received File Name. Is there anyway of doing this without using custom pipeline component.
Here I am using the Orchestration and SMTP Adapter.Any help is greatly appreciated.
Thanks

It might work if you use a custom pipeline component on your send port and in the Execute method populate the MIME.FileName property of the body part.
Something like:
public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg)
string filename = inmsg.Context.Read("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties");
inmsg.BodyPart.PartProperties.Write( "FileName", "http://schemas.microsoft.com/BizTalk/2003/mime-properties", "filename);
return inmsg;
You can take reference from similar post here
SMTP - Setting attachment filename
Anther good article with MIME is here
Setting attachment filename with the SMTP Adapter
For MIME case your SMTP message construct statement would be like below
multipartMessage.MessagePart_1= InMSG;
multipartMessage.MessagePart_2="This is message part2 as a string";
multipartMessage(SMTP.Subject) ="Email From Dynamic Port";
multipartMessage(SMTP.From) ="[email protected]";
multipartMessage(SMTP.SMTPHost) ="yoursmypserver.com";
multipartMessage.MessagePart_2(MIME.FileName) = "Attachment_Name";
multipartMessage(SMTP.SMTPAuthenticate) =0;
Thanks
Abhishek

How do I put the file name and path into either the header or the footer?

I need to keep track of pdf documents as their names or locations sometimes change. I need to show both file name and path, preferably in the header. I would also like it to refresh automatically when I change, say, the file name, but that's not as essential as the basic function of showing the file name and path.

You will need to do this with a text field and a Javascript that executes on open.

ITunes update corrupted some of my music files so iTunes can't find the file, nor music I bought from the iTunes store.

After an iTunes generated update of iTunes, some of my music can't be accesed any more. When I try to play the file, iTunes says it can't find the link. This also happens with music I purchase from the iTunes store, so I've lost all this music; do I have to re-buy the purchased music again? My iTunes program is on my C drive, and the music library is on my D drive. In iTunes, I've set the ripped music to be placed in my D drive. The lost links are on some music files, but not others which do play music. Some compilation music files were split up into individual files, usually without LP art attached. Some album art was placed on wrong albums as well. Music with lost links have a ! mark beside the song name. File info says the link is on my C drive, but I can't find it there. Any ideas on how to get these lost files back. Thanks, Moizy.

Try this...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Rename the file name of a Vault (not the Vault name)

I have a Maxtor Sahred Storage Plus and I am now planning to use it for backing up Aperture. Yes, I now that Aperture is not made for back up on a network, but it should be possible according to this thread: http://discussions.apple.com/thread.jspa?messageID=2245775&#2245775
My problem is that the filename of the vault is either to long or contains characters which the Maxtor do not accept so I can not copy the vault from Finder as suggested in the above thread. My question is if someone now if it is OK to rename the filename of the Vault?
Macbook Pro Mac OS X (10.4.7)
iBook Mac OS X (10.4.6)

Hi,
you can't.
Except you save the file under a different name before you send it.

Anyone know the syntax for printing-to-file for the file name in windows? Tried the following and it did not work...C:\Documents and Settings\Cal\My Documents\FolderForPrinting but I also put it in small quotes.

Two issues I think.
One is how a file is specified to print to.
Second is how directories with spaces are allowed, and the detail for allowing spaces in directory or file names.
This is an XP operating system from Windows.
Firefox is the browser.

Two issues I think.
One is how a file is specified to print to.
Second is how directories with spaces are allowed, and the detail for allowing spaces in directory or file names.
This is an XP operating system from Windows.
Firefox is the browser.

When I add text to a PDF, I am forced to change the file name rather than just updating the current file. Why?

I have been doing the same process for months and until recently I could just add text to a pdf, click save, adobe would ask me if I wanted to replace the current file, I'd say yes and we would be done. Now I get a message that says "The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder." It does this about 70% of the time. The rest of the time it works like it used to.

You cannot skip arguments, you can either use the function with one
argument (just the required argument), or you have to provide all of them.
Also, it looks like you are trying to specify 20 parameters, even though
the function only takes 19. Try the following:
Call jso.addWaterMarkFromText("Test Text", jso.app.Constants.Align.Center,
jso.Font.Helv, 16, _
    jso.Color.Black, 0, 0, True, True, True, _
    jso.app.Constants.Align.Center, jso.app.Constants.Align.Center, _
    100, 100, False, 1, False, 0, 1)
I just typed this in without running it through the compiler, so there may
be typos in the code, but you should get the idea of how the code is
supposed to look like.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com
On Fri, Jul 26, 2013 at 1:55 PM, I Love Mustangs

Get rid of the "*app name* is software downloaded from the internet" popup

Hey so I downloaded Chrome and Firefox, and whenever I open them it says "Chrome (or) Firefox is software downloaded from the internet on *date here*. Are you sure you want to open it?"
Theres no checkbox to say "Do not ask me again", so is there a way to get it to NOT ask me again?
All help is appriciated,
thanks.
-Josh

Are you launching those apps from a different user account than the account that downloaded them?
From
About file quarantine in Mac OS X v10.5 and v10.6
If you have multiple user accounts on your Mac, the user account that downloaded the file is the only user account that can remove the quarantine attribute to the file. All other user accounts can open the quarantine file, but they will be presented with the quarantine dialog box asking "Are you sure you want to open it?" every time they open the file.

I've lost the File, Edit, Tools, Options etc from the top of my browser window. How do I fix this?

At the top of my browser page I used to have File, Edit, Tools, Options, Help etc. well that has vanished. How do I get them back?
== This happened ==
Every time Firefox opened
== not sure when, but after an update, I think.

i pressed F10 then the prob was ok - i then went into the view option and toolbars where my menu bar had been un clicked problem solved :-)

File adapter polling and getting the file name

I have a requirement where I have to poll a file and dump the data into the DB. But while polling a file for a particular file name, I also need to get the name of the file to do some operations on the file. The file name should be passed from the adapter in order to do some operations based on the file name. Is it possible to get the file name by any chance?

Hi,
its easy to get the file name..by creating the variable for the fileAdapterInboundHeader.wsdl
just follow the below link.
http://abhishek-soablog.blogspot.com/2008/06/bpel-getting-file-name-from-file.html
Edited by: Oraacler on Mar 19, 2010 2:59 AM

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Problem with getting the file name and type from OAMessageFileUploadBean

Hi Tapash,
I am trying the code below to get the file name and mime type from OAMessageFileUploadBean,
DataObject fileUploadData = (DataObject)pageContext.getNamedDataObject("Documents");
String uFileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");
String contentType = fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
But this piece of code gives errors saying that selectValue selectValue(null, java.lang.String) not found in class oracle.svc.DataObject
Any ideas? why this code is giving error?
Can i handle the event of browse button for OAMessageFileUploadBean?
Regards,
Nagesh Manda.

Try using class oracle.cabo.ui.data.DataObject
--Shiv

Want To Capture The File name Using the SQL Loader

Hi,
I Am loading The Data To Staging Table Using The SQL*developer, The File That need to be Loaded Will be One Of The Input To the SQL*Loader Concurrent Program.
In One Of The Column Of My staging Table I want To Put The File name.
Can We do the Same.
thanks,
Ankit

Not unless you generate the loader controlfile dynamically.. try this.. pass file name as $1 first parameter. Use the below example and modify as per your requirement
1) create table with following table structure
create table temp_table (x varchar2(20),file_name varchar2(30));
2) create data file - test.dat (contains only values for x)
abc
def
geh
ggg
fff
3) create a host file host file - test.sh with following content:
echo "load data
infile $1
append
into table temp_table
fields terminated by ','
(x,
file_name constant "$1")" > test.ctl
sqlldr <usr>/<pwd>control=test.ctl
4) run the host file from unix prompt with data file name as parameter (ensure test.sh has execute permissions)
test.sh test.dat
Hope this helps
Regards,
Bhadri

Capture the file name in the payload from the SOAP payload

Similar Messages

Maybe you are looking for