Capturing Customer No. from BDC

Dear Experts,
I have a custom developed screen using which I am getting the customer details from user and then using BDC to create the customer in SAP(in XD01) I want to capture the SAP generated customer number and update it back in my z-table. Can some one guid me as to how I can achieve this?
I tried to capture it using BDCMSGCOLL but the SAP no. is not getting captured here.
Awaiting your reply,
Bhavin

After a customer is created a success message is displayed with Customer number.You can cathc that messages value.
Just after every 'CALL TRANSACTION 'XXX' USING BDCTABLE' any one system field will capture the Customer number (SY-MSGV1,SY-MSGV2,SY-MSGV3,SY-MSGV4) i am not in front of the system just check with these system field on of them will capture the Number.
Regards,
gurpreet

Similar Messages

Capture Customer Class in time of BP creation from Screen

Hi All,
I am facing a problem that I need to capture Customer Class , Sales Area Template and ID type in time of BP creation in DCHCK event. I have to check if user is putting these value correctly or not. If user entered wrong value then I have to through error message and not to save to BP.
Foe example I am using 'BUP_BUPA_BUT000_GET' to get all other data along with BP type and so on.
Plesae help regarding this if any one is aware of it.
Thanks & Regards
Ajoy

Hi,
asaha... I want to know how it would be done ?
by ABAP customization or in the CRM IMG itself ?
can you brief about it ..
Thanks
" RA "

Capturing Custom Error Messages from Database Triggers

Hi Everybody
When i fired a trigger it should show only the custom message from RAISE_APPLICATION_ERROR
instead of showing all the message....
ORA-20103: We Cannot Delete the emp_id 5610
ORA-06512: at "emp_id", line 89
ORA-04088: error during execution of trigger 'delete_emp_id.trg'I want to show only the custom message
We Cannot Delete the emp_id 5610Thanks in Advance

Not possible AFAIK.
Instead of RAISE_APPLICATION_ERROR, define a custom exception, call it and just print it onto the console (using dbms_output). You can't pop it out though.

Capture images (JPEG) from IP-Camera

Hey there!
I have been trying to capture images from an IP-Camera. I understand that this has to be done by using a custom DataSource and I have tried many many example found here on the net, but with no results.
I think I've tried every piece of code found here at this forum regarding this subject.. :/
The best I could do was not getting an error while creating a custom DataSource from a BufferedStream..but the when I try to configure/realize the Processor - created with Manager.createProcessor(customdatasource) - it gives me an error which, I think, has something to do with unrecognized content..
I could post all the examples I tried but I think it would be too much of a confusion so...does anyone have a full working example of code to achieve this? WITH the frame grabber class? plizzzzzzzzz?
Thanks,
Edd

I felt Captfoss' solution was inspired and so gave it a go. The following builds a video from an ip cam jpg stream using a version of Sun's JpegImagesToMovie.java. It is hacked together quickly and with scope for improvement, but it works, proves the idea, and is a good example.
Run as:- java JpegImagesToMovie -w 320 -h 240 -f 30 -o file:test.avi
* @(#)JpegImagesToMovie.java     1.3 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
* Some public domain modifications by Andy Dyble for avi etc by self and from
* other internet resources 19/11/2008. Reads editable 20 ip cam network jpg files.
* Supported formats tested for compression options. This code could be much improved
* further to these amendments. Absolutely no warranties. www.exactfutures.com
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
import javax.media.format.JPEGFormat;
* This program takes a list of JPEG image files and convert them into
* a QuickTime movie.
public class JpegImagesToMovie implements ControllerListener, DataSinkListener {
    public boolean doIt(int width, int height, int frameRate, Vector inFiles, MediaLocator outML, String outputURL)
     ImageDataSource ids = new ImageDataSource(width, height, frameRate, inFiles);
     Processor p;
     try {
         System.err.println("- create processor for the image datasource ...");
         p = Manager.createProcessor(ids);
     } catch (Exception e) {
         System.err.println("Yikes! Cannot create a processor from the data source.");
         return false;
     p.addControllerListener(this);
     // Put the Processor into configured state so we can set
     // some processing options on the processor.
     p.configure();
     if (!waitForState(p, p.Configured)) {
         System.err.println("Failed to configure the processor.");
         return false;
     // Set the output content descriptor to QuickTime.
     if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI"))
          p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.MSVIDEO));
     if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
          p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.QUICKTIME));
     // Query for the processor for supported formats.
     // Then set it on the processor.
     TrackControl tcs[] = p.getTrackControls();
     for(int i=0;i<tcs.length;i++)
          System.out.println("TrackControl "+i+" "+tcs);
     Format f[] = tcs[0].getSupportedFormats();
     if (f == null || f.length <= 0) {
     System.err.println("The mux does not support the input format: " + tcs[0].getFormat());
     return false;
     for(int i=0;i<f.length;i++)
          System.out.println("Supported Format "+i+" "+f[i]);
//     tcs[0].setFormat(f[0]);
     if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI"))     // must be VideoFormat
          System.err.println("Setting the track format to: "     // INDEO50 CINEPAK f[0] etc
               + tcs[0].setFormat(new VideoFormat(VideoFormat.INDEO50)));
     if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
          System.err.println("Setting the track format to: "     // JPEG CINEPAK RGB f[0] etc
               + tcs[0].setFormat(new VideoFormat(VideoFormat.JPEG)));
     //System.err.println("Setting the track format to: " + f[0]);
     // We are done with programming the processor. Let's just
     // realize it.
     p.realize();
     if (!waitForState(p, p.Realized)) {
     System.err.println("Failed to realize the processor.");
     return false;
     // Now, we'll need to create a DataSink.
     DataSink dsink;
     if ((dsink = createDataSink(p, outML)) == null) {
     System.err.println("Failed to create a DataSink for the given output MediaLocator: " + outML);
     return false;
     dsink.addDataSinkListener(this);
     fileDone = false;
     System.err.println("start processing...");
     // OK, we can now start the actual transcoding.
     try {
     p.start();
     dsink.start();
     } catch (IOException e) {
     System.err.println("IO error during processing");
     return false;
     // Wait for EndOfStream event.
     waitForFileDone();
     // Cleanup.
     try {
     dsink.close();
     } catch (Exception e) {}
     p.removeControllerListener(this);
     System.err.println("...done processing.");
     return true;
* Create the DataSink.
DataSink createDataSink(Processor p, MediaLocator outML) {
     DataSource ds;
     if ((ds = p.getDataOutput()) == null) {
     System.err.println("Something is really wrong: the processor does not have an output DataSource");
     return null;
     DataSink dsink;
     try {
     System.err.println("- create DataSink for: " + outML);
     dsink = Manager.createDataSink(ds, outML);
     dsink.open();
     } catch (Exception e) {
     System.err.println("Cannot create the DataSink: " + e);
     return null;
     return dsink;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(Processor p, int state) {
     synchronized (waitSync) {
     try {
          while (p.getState() < state && stateTransitionOK)
          waitSync.wait();
     } catch (Exception e) {}
     return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
     if (evt instanceof ConfigureCompleteEvent ||
     evt instanceof RealizeCompleteEvent ||
     evt instanceof PrefetchCompleteEvent) {
     synchronized (waitSync) {
          stateTransitionOK = true;
          waitSync.notifyAll();
     } else if (evt instanceof ResourceUnavailableEvent) {
     synchronized (waitSync) {
          stateTransitionOK = false;
          waitSync.notifyAll();
     } else if (evt instanceof EndOfMediaEvent) {
     evt.getSourceController().stop();
     evt.getSourceController().close();
Object waitFileSync = new Object();
boolean fileDone = false;
boolean fileSuccess = true;
* Block until file writing is done.
boolean waitForFileDone() {
     synchronized (waitFileSync) {
     try {
          while (!fileDone)
          waitFileSync.wait();
     } catch (Exception e) {}
     return fileSuccess;
* Event handler for the file writer.
public void dataSinkUpdate(DataSinkEvent evt) {
     if (evt instanceof EndOfStreamEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          waitFileSync.notifyAll();
     } else if (evt instanceof DataSinkErrorEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          fileSuccess = false;
          waitFileSync.notifyAll();
     public static void createInputFiles(Vector files)
          // Create a file for the directory
          File file = new File("images");
          // Get the file list...
          String s[] = file.list();
          files.removeAllElements();     // if any set from arguments
          for(int i=0;i<s.length;i++)
               if(s[i].indexOf(".jp")!=-1)
                    files.addElement("images"+File.separator+s[i]);     // and to sort if required
               else
                    System.out.println((i+1)+": "+s[i]+" - ignored");
public static void main(String args[]) {
     if (args.length == 0)
     prUsage();
     // Parse the arguments.
     int i = 0;
     int width = -1, height = -1, frameRate = 1;
     Vector inputFiles = new Vector();
     String outputURL = null;
     while (i < args.length) {
     if (args[i].equals("-w")) {
          i++;
          if (i >= args.length)
          prUsage();
          width = new Integer(args[i]).intValue();
     } else if (args[i].equals("-h")) {
          i++;
          if (i >= args.length)
          prUsage();
          height = new Integer(args[i]).intValue();
     } else if (args[i].equals("-f")) {
          i++;
          if (i >= args.length)
          prUsage();
          frameRate = new Integer(args[i]).intValue();
     } else if (args[i].equals("-o")) {
          i++;
          if (i >= args.length)
          prUsage();
          outputURL = args[i];
     } else {
          inputFiles.addElement(args[i]);
     i++;
///     createInputFiles(inputFiles);
     if (outputURL == null)// || inputFiles.size() == 0)
     prUsage();
     // Check for output file extension.
     if(!outputURL.endsWith(".avi") && !outputURL.endsWith(".AVI") && !outputURL.endsWith(".mov") && !outputURL.endsWith(".MOV"))
          System.err.println("The output file extension should end with a .mov extension");
          prUsage();
     if (width < 0 || height < 0) {
     System.err.println("Please specify the correct image size.");
     prUsage();
     // Check the frame rate.
     if (frameRate < 1)
     frameRate = 1;
     // Generate the output media locators.
     MediaLocator oml;
     if ((oml = createMediaLocator(outputURL)) == null) {
     System.err.println("Cannot build media locator from: " + outputURL);
     System.exit(0);
     JpegImagesToMovie imageToMovie = new JpegImagesToMovie();
     imageToMovie.doIt(width, height, frameRate, inputFiles, oml, outputURL);
     System.exit(0);
static void prUsage() {
     System.err.println("Usage: java JpegImagesToMovie -w <width> -h <height> -f <frame rate> -o <output URL>");// <input JPEG file 1> <input JPEG file 2> ...");
     System.exit(-1);
* Create a media locator from the given string.
static MediaLocator createMediaLocator(String url) {
     MediaLocator ml;
     if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
     return ml;
     if (url.startsWith(File.separator)) {
     if ((ml = new MediaLocator("file:" + url)) != null)
          return ml;
     } else {
     String file = "file:" + System.getProperty("user.dir") + File.separator + url;
     if ((ml = new MediaLocator(file)) != null)
          return ml;
     return null;
// Inner classes.
* A DataSource to read from a list of JPEG image files and
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
class ImageDataSource extends PullBufferDataSource {
     ImageSourceStream streams[];
     ImageDataSource(int width, int height, int frameRate, Vector images) {
     streams = new ImageSourceStream[1];
     streams[0] = new ImageSourceStream(width, height, frameRate, images);
     public void setLocator(MediaLocator source) {
     public MediaLocator getLocator() {
     return null;
     * Content type is of RAW since we are sending buffers of video
     * frames without a container format.
     public String getContentType() {
     return ContentDescriptor.RAW;
     public void connect() {
     public void disconnect() {
     public void start() {
     public void stop() {
     * Return the ImageSourceStreams.
     public PullBufferStream[] getStreams() {
     return streams;
     * We could have derived the duration from the number of
     * frames and frame rate. But for the purpose of this program,
     * it's not necessary.
     public Time getDuration() {
     return DURATION_UNKNOWN;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
* The source stream to go along with ImageDataSource.
class ImageSourceStream implements PullBufferStream {
     Vector images;
     int width, height;
     VideoFormat format;
     int nextImage = 0;     // index of the next image to be read.
     boolean ended = false;
     float frameRate;
     long seqNo = 0;
     public ImageSourceStream(int width, int height, int frameRate, Vector images) {
     this.width = width;
     this.height = height;
     this.images = images;
          this.frameRate = (float)frameRate;
     format = new VideoFormat(VideoFormat.JPEG,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    Format.byteArray,
                    (float)frameRate);
     * We should never need to block assuming data are read from files.
     public boolean willReadBlock() {
     return false;
byte[] input_buffer;
byte[] imgbytearray;
byte[] imgusebyte;
int camWidth = 320;
int camHeight = 240;
URL url;
long timeStamp;long timeStamp0=System.currentTimeMillis();long resultTimeStamp;
     public boolean urlFetchJPG()
          String ipcamserver = "146.176.65.10";     // examples 146.176.65.10 , 62.16.100.204 , 194.168.163.96 , 84.93.217.139 , 194.177.131.229 , 148.61.171.201
          try
               url = new URL("http://"+ipcamserver+"/axis-cgi/jpg/image.cgi?camera=&resolution=320x240".trim());
          catch(Exception e){System.out.println("Exception url "+e);}
          try
               if(input_buffer==null)input_buffer = new byte[8192];
               if(imgbytearray==null)imgbytearray = new byte[camWidth*camHeight*3];
               URLConnection uc = url.openConnection();
               uc.setUseCaches(false);
               //uc.setDoInput(true);
               //uc.setRequestProperty("accept","image/jpeg,text/html,text/plain");
               BufferedInputStream in;
               int bytes_read;
               int sumread=0;
               in = new BufferedInputStream(uc.getInputStream());
               while((bytes_read=in.read(input_buffer, 0, 8192))!=-1)
                    if(sumread+bytes_read>imgbytearray.length)
                         byte[] imgbytearraytemp = new byte[sumread+bytes_read+8192];
                         System.arraycopy(imgbytearray,0,imgbytearraytemp,0,imgbytearray.length);
                    System.arraycopy(input_buffer,0,imgbytearray,sumread,bytes_read);
                    sumread=sumread+bytes_read;
               in.close();
               imgusebyte = new byte[sumread];
               System.arraycopy(imgbytearray,0,imgusebyte,0,sumread);
          catch(Exception e){System.out.println("Exception urlFetchJPG "+e);}
          return true;
     * This is called from the Processor to read a frame worth
     * of video data.
     public void read(Buffer buf) throws IOException {
     // Check if we've finished all the frames.
     if (nextImage >= 20) //images.size())
          // We are done. Set EndOfMedia.
          System.err.println("Done reading all images.");
          buf.setEOM(true);
          buf.setOffset(0);
          buf.setLength(0);
          ended = true;
          return;
///     String imageFile = (String)images.elementAt(nextImage);
     nextImage++;
//     System.err.println(" - reading image file: " + imageFile);
     // Open a random access file for the next image.
///     RandomAccessFile raFile;
///     raFile = new RandomAccessFile(imageFile, "r");
     byte data[] = null;
     // Check the input buffer type & size.
///     if (buf.getData() instanceof byte[])
///          data = (byte[])buf.getData();
          urlFetchJPG();
          data = imgusebyte;
     // Check to see the given buffer is big enough for the frame.
///     if (data == null || data.length < raFile.length()) {
///          data = new byte[(int)raFile.length()];
          buf.setData(data);
     // Read the entire JPEG image from the file.
///     raFile.readFully(data, 0, (int)raFile.length());
//     System.err.println(" read " + raFile.length() + " bytes.");
     buf.setOffset(0);
///     buf.setLength((int)raFile.length());
          buf.setLength(data.length);
     buf.setFormat(format);
     buf.setFlags(buf.getFlags() | buf.FLAG_KEY_FRAME);
///          long time = (long)(seqNo * (1000D / frameRate) * 1000000);
          timeStamp = System.currentTimeMillis();
          resultTimeStamp = timeStamp - timeStamp0;
          long time = resultTimeStamp * 0xf4240L;
          buf.setTimeStamp(time);
          buf.setSequenceNumber(seqNo++);
     // Close the random access file.
///     raFile.close();
     * Return the format of each video frame. That will be JPEG.
     public Format getFormat() {
     return format;
     public ContentDescriptor getContentDescriptor() {
     return new ContentDescriptor(ContentDescriptor.RAW);
     public long getContentLength() {
     return 0;
     public boolean endOfStream() {
     return ended;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
{code}

Error in running custom query from jspx(site) for Content Tracker Report

Hi All,
I want to generate a custom Content Tracker Report. I am able to do so from Content Tracker console, but when i try to invoke the service 'SCT_GET_DOCUMENT_INFO_ADMIN' or 'SCT_GET_DOCUMENT_INFO' with my custom query(which simply counts the number of rows in a table) from my jspx page, it gives the following error.
oracle.stellent.wcm.server.request.RequestException: Error
occurred in Content Server executing service
'SCT_GET_DOCUMENT_INFO_ADMIN'
Caused By: oracle.stellent.ridc.protocol.ServiceException: Unable to get
document info. Unable to execute service method 'sctExecuteQuery'. The
error was caused by an internally generated issue. The error has been
logged.
What could be the reason and the resolution?
Also, I know that i am invoking the service in the right way as custom report from query as 'select * from users' works fine from site.
P.S. I am using UCM 11g + SSXA

Things are turning weird. The below two queries work from jspx.
1. SELECT * FROM Users
2. SELECT dname FROM Users
But, the following query gives error (SQL is correct).
select dname, count(dname) from users group by dname
Unable to execute service method 'sctExecuteQuery'. Null pointer is dereferenced.
$Unable to get document info.!csUnableToExecMethod,sctExecuteQuery!syNullPointerException
intradoc.common.ServiceException: !$Unable to get document info.!csUnableToExecMethod,sctExecuteQuery
*ScriptStack SCT_GET_DOCUMENT_INFO_ADMIN
3:sctExecuteQuery,**no captured values**
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.Service.doCodeEx(Service.java:584)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.NullPointerException
at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
at intradoc.util.IdcConcurrentHashMap.get(IdcConcurrentHashMap.java:60)
This works fine from Content Tracker UI.
Anyone has any idea, what could be the issue here?

HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help???

Moving custom brushes from Pshop CS5.5 to CS6

Is it possible to move custom brushes from Pshop 5.5 to 6? When I choose Load in 6, I can't even open the Brushes folder in 5.5
Will 5.5 brushes run on 64bit?

Thank you for your professional response. You may be using a different Mac platform than I and all the Mac users I know. When I have Pshop open and search to transfer/load brushes, Finder does NOT appear in the Menu bar.... only the Apple icon and Pshop menu commands. The Apple icon is not the Finder.
When I'm out of Pshop on the Desktop, which THEN displays Finder in the Menu bar, then there is NO way to transfer/load brushes into Pshop.
Therein lies the ambiguity of your initial response.
As you can see by these screen captures, the Rec Brush I created in a tutorial using 5.5 (first three images - v5.5), does not appear (fourth image - v6) when I attempt to Load it into 6 Brushes out of v5.5. Yet the Flames (SS) brushes (second, third, fourth images) I downloaded from a site DO appear and I was able to transfer them.
The Load process (in v6) is not recognizing the CUSTOM brush (generated in v5.5) for some reason...

Calling a Report from BDC

Hi Friends,
I just have a query can anyone help me on it.? I want to call a customised transaction from BDC Call transaction ,the customized transaction should get 2 values from BDC.
Regards
Dinesh

Hi,
Please don't use All Caps/Bold letters.
Whether the T-code is custom or standard, there is no difference in the syntax of CALL TRANSACTION. You can use it in the same way. Explain the problem you are facing so that we will try to resolve it.
Thanks,
Vinod.

How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager

Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.

Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu

How to capture F4 help during bdc recording

Hello All,
I need one help to solve one of the requrimkents..
In transaction Co02, user have to add the compoenents manually..but before user adds the components manually, i need to call the transaction co02, then i have do F4 help and fill the data for the user and then user will handle it manually...
So till F4 help and filling the data in F4 help, i need to do through my program using bdc...when i try to do, F4 help is not captured in my recording..
So please help me how to capture F4 help during BDC recording.
Thanks in advance
Sangeetha

HI Sangeetha,
I have one question for you!!!!
Capturing F4 help in BDC recording is secondary thing. First, If you want the user to select the value from the F4 help, then in that case user will have to run the BDC program in the foreground mode which is not possible and time consuming if your file is having more records (say >100). Then in that case will you prompt the user every time for selecting the component values, as many records there will be in the file to be uploaded??? I think it is not a way of handling or capturing the component values. I would prefer that pass the component values in the file which has to be uploaded.
Please let me know if you still have some doubts on the same.
Thanks
VJ

Can you send custom events from one form to another?

I have a compli
cated application, where I about hundred inp
uts organized in several input forms. Some of the forms
require data which has been input in other forms. I have tried to
dispatch custom events from one form to another, but it dispatches the
whole form and I only need one or two items.
Ha anybody else come across such a problem?
Svend

One way is to share data in a static singleton

How to capture an image from a clip

Hi,
Is there a way to capture an image from a movie clip using iMovie 06?
I would like to save some frames from the vedio footage as photos.
Any help will be greatly appreciated. Thank you.
New Mac User
Mac OS X (10.4.5)

Hi iMac User:
Yes-you can save a single frame from iMovie by selecting the File-->Save Frame As option. From there it will ask you where and in what format you want to save it.
Just be aware that the quality won't be perfect because it is taken from a video clip.
Sue

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

Unable to properly capture HD video from miniDV tape in FCE

unable to capture HD video from miniDV tape
When I connect my Sony HDR-HC3 miniDV HDV camcorder to my iMac via firewire cable and use Final Cut Express to capture the video from the tape, I do not get a Capture window that allows me to specify in and out points, I just get a playback window that immediately starts capturing and the only option I have in this window is hit ESC to stop capturing. If I let this capture window continue to capture the video from the camera with miniDV HD tape, then the entire tape would be captured as one massive single video clip.
QUESTION: Is there something I change or do to make the proper capture window appear where I can specify in and out points to capture from tape for each clip?
NOTE: using same camera and tape with iMovie with automatic capture enabled, all the clips get captured properly. I also tried to use the manual setting in iMovie and it worked too.
More details(read only if you want more information)
I have a several miniDV tapes containing HD video created on a Sony Sony HDR-HC5 and Sony HDR-HC7. Unfortunately, both these camera were stolen, and I have since moved to a camera that uses flash memory, not tape. However, I need to get the video footage off these tapes, so I bought a used Sony HDR-HC3, it plays the HD miniDV tapes just fine and iMovie reads the video from this camera just fine, but Final Cut Express does not.
When I setup Final Cut Express, I used the Easy Setup and specified:
Format: HD
Rate: 29.97 fps
Use: HDV-Apple Intermediate Codec 1080i60
These setting match those of the camera and recorded tape. If I use any other settings but these, then Final Cut Express never sees the camera and never opens any capture window at all. Using Quicktime 10 movie inspector on the clips captured by iMovie from same camera, all the clips match this setting too.
Final Cut Express version 4.0.1
iMovie 09 Version 8.0.2 (821)
iMac 2.93 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 running
Mac OS X Version 10.6.4
My Final Cut Express scratch disk is a Seagate 2TB external USB 2.0 Hard Drive that has been formatted to be Mac OS Extended (Journaled). This external disk is also where iMovie successfully captured all the video from the same camera.

Thanks for the answer. It makes me sad. I thought using Final Cut Express would be an upgrade to a more robust editing system from iMovie, yet iMovie does a superior job of logging and capturing video from HDV video on miniDV tape in comparison to FCE. Not only does iMovie capture each clip on the tape into it's own video file automatically, it also includes timestamp information in the filename indicating when the clip was originally recorded, which appears to be something that is missing from Final Cut Express. Now I realize that HDV miniDV cameras had a relatively short life span in the consumer marketplace and have since all been replaced by flash and hard drive based AVCHD cameras, but from circa 2004 to 2007, miniDV HDV camcorders were very popular and I am sure there are lots of consumers that must be super frustrated by Final Cut Express limited ability to log and capture clips properly from these cameras.
Assuming I do not want to make a rough cut of video in iMovie and prefer to begin my editing project in Final Cut Express (not doing XML export of iMovie project), I need to determine the best way to get clips captured via iMovie into Final Cut Express and determine if there is anything inferior in the iMovie captured clips that I need to be aware of. So far it appears that both iMovie and Final Cut Express reduce the 5.1 surround sound captured on the HDV miniDV tapes to stereo sound, which is not a big lose given the 5.1 sound was recorded from camera's built-in microphone, but it makes me wonder if the video is reduced in any way by the iMovie import process, examining the video in quicktime's inspector window the video appears to be the same in both iMovie and FCE, but I'll research the answers to these questions elsewhere on this forum and post additional questions if I do not find the information I need.

Compile all custom forms from 11i to r12

Hi,
I have to compile 11i forms into R12.
Copyresource folder and fmb to local system and compile forms manually in local system is one way
I heard there is another easy way of compiling custom forms from 11i to r12. If you have any solution for this please help me.
Any help is big help, thanks in advance.

Hi;
In addition to Hussein Sawwan great post,please review:
Custom form upgrade 11i to R12
Planning to upgrade from 11i to R12
Oracle Custom 11i Forms compatablity in Oracle R12
Oracle Custom 11i Forms compatablity in Oracle R12
How To Migrate My Customized reports & Forms To R12?
How To Migrate My Customized reports & Forms To R12?
Regard
Helios

Capturing Customer No. from BDC

Similar Messages

Maybe you are looking for