Car Mount Solution/ProClip???

Does anyone know who makes a car mount for the new iPod? I need to mount this baby in my ride asap so I can watch movies while on the go.
Edit: Has anyone tried it using the ProClip? http://www.proclipusa.com/?sectionpath=127&pageid=8800&processor=content&pcatego ryid=13759

I have the proclip padded tilt version but its for the 4th gen iPod. They DO make a padded adjustable version of this that might be a better choice for the 5th g iPod. email them and they will respond within a day. I just got mine tonight...its quite nice....expensive but I try to block that kind of stuff out =)

Similar Messages

  • Phone Car Mounts for Frequent Traveler / Rental?

    http://www.proclipusa.com

    I travel quite a bit for work and have been looking around for a car mount that can be transferred to different rental vehicles. During a busy month, I might be in a different vehicle each week (more than some, definitely less than the hardcore traveler). Just wanted to ping the forum to see what others in this situation do. I can't be the first one with this issue.I've been playing around with different configurations and was wondering what others were using. I grabbedthis inexpensive magnetic mountwhen it was on special last week, and it seems fine except that I don'twant to stick a magnet to my phone and don't use a case.Possible solution: use aneasily removable caseon the road. Any suggestions here? Maybe silicone that can beeasily popped on and off when I get in the car? Then stick the magnet to the inside of that. Maybe.Just saw...
    This topic first appeared in the Spiceworks Community

  • Iphone 4 with case car mount

    can anyone recommend an iphone 4/4s car mount that I can use with a case? Something not crazy expensive, and something preferably on Amazon, or a trusted site, thanks!

    there is a company called Proclips USA
    http://www.proclipusa.com/
    that has car mounts for justt about any car an phone - they are a little pricey though
    have you tried searching amazon for iphone car mount?

  • I Need a Car Mount That WORKS!!

    I've been through two car mounts...the iOttie that Apple.com sells, and another bought at BestBuy. Both encountered the same problem in my car...
    I need the mount to stick to a plastic surface that is curved. My first failed attempt had a sticky suction cup...it was not sticky enough and the suction cup does not work on plastic.
    I'm desperately trying to find a good solution...any recommendations?

    HI Peter,
    I would recommend the Tackform Ultra Grip.. One thing I want to point out is that most of the quality sticky suction cups will still stick to a slightly curved surface. The issue many people run into is that the actual dashboard material is porous and over a few hours or days the air slowly seeps through and you lose suction. In this case there really wouldn't be a good direct to dash suction cup solution for you.. The Tackform Ultra Grip comes with an additional 3M pad that you can use first but many people don't like putting any type of adhesive on your dash.
    If you're looking for solid. The Ultra Grip locks on super tight to surfaces. It has a bigger suction cup than most mounts out there.

  • Nokia 5800 CR-103 Car mount problems

    Hi,
    I have a Nokia 5800 Nav edition with the car mount and I am having a lot of trouble removing the phone from the holder once it is put in. I have to struggle with it for a few minutes every time before the CR-103 holder releases my phone from its clutches. I am afraid this struggle will scratch and damage my phone. Am I doing something wrong? Is there a simple mechanism to release the phone?
    Solved!
    Go to Solution.

    The larger opened end is very flexible. You must bend that back a bit and your phone should slide in and out easily. I was a little cautious at first myself. Good luck.
    Message Edited by feardrew on 16-Jan-2010 03:56 AM

  • Best iphone car mount for new VW beetle

    trying to figure out what is the best solution for iphone car mount

    ProClips is expensive and yuo need to buy two different parts.   I am not driving a brand new car and when I change cars this is a big investment in something that wil only work with VW beetle.
    BUT I found the PERFECT SOLUTION aqnd wanted to share with all.
    This car mount is adjustable and will work well with the iphone in a case too. It has a low profle and easily removed from car to car too.
    It is mountable on windshield or on the dash and that is where I mounted it right in between my two air vents and just above radio on my beetle.  From here it is easily viewiable and accessable tor  my charger & for plugging into car speaker system.
    Best thing is the price......under $20 with shipping.  Okay, what is it.....IOTTIE. 
    You can view some utube videos of this thing too if you want.   I love mine!

  • E71 car mounts, what is everyone using?

    Just wondering what the consensus is on car mounting kits for the E71?

    http://europe.nokia.com/find-products/accessories/​all-accessories/car-solutions/mobile-holders/nokia​...
    That holder is specifically designed specifically to hold the Nokia E71. (Nokia CR-106)
    You can use it with:
    http://europe.nokia.com/link?cid=EDITORIAL_173561
    To attach it to the windscreen much like a portable sat-nav unit, with a suction mount.
    I don't have either I'm afraid (I have an Audi Sat Nav and Bluetooth), so I'm just pointing out that Nokia actually make a specific holder for the E71. From the Nokia UK shop the suction mount is £13GBP and the holder is £49GBP.
    The UK Expansys store (who also have worldwide shops) http://www.expansys.com/p.aspx?i=171420 are selling it considerably cheaper.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Good iphone car mount that works with case?

    I need a car mount for my iPhone so that I can use the phone's GPS app. I've looked around and so far I can only find mounts that work for iPhones without any case.
    I would rather not have to remove the case everytime I got in my car, so are there any recommended mounts out there that work for phones with cases?
    Thanks!

    Griffin makes an FM/lighter mounted model, which has several bottom mounting brackets, to fit several phone models. I tested it out today, but the ipod buttons on the model don't work correctly, and FM was spotty to awful, as always on these type of setups. It did hold my naked cellphone well, and wish it had worked as advertised - cost about $100 at Best Buy.
    Belking has a similar model (about $70 at Best Buy), without the FM transmitter, also on a lighter stalk, which may work, since it grips the top of the phone with a wider clip, made to adapt to case thicknesses, I presume. I have not tried out this model, but may do so, since I have never found a single FM transmitter that works well - too much static, fading in and out, etc.
    Is there anyone who can recommend a lighter mounted (on a flexible stalk) charger for the iphone, that has a stalk long enough to accommodate any rental car, I would very much appreciate it.

  • Jukebox zen car mounti

    Does anybody know whether there is a specific car mount for the Creative Nomad Jukebox Zen Xtra? I want to listen to my MP3 whilst in the car but can't find a mount suitable for attaching to either the dashboard or the air vent.
    The size of the MP3 is approx width 8.0cm & depth is approx 2.5cm
    Any help would be appreciated - l'm going mad trying to find something suitable!!

    This would be better in the MP3 Players forum.
    I've never heard of a specific car mount for the Xtra.

  • Best car mount for iPhone WITH case

    ive tried car mounts in the past and some worked fine...until I got a case for my iphone. lots of mounts have custom fitting so that it will fit the naked iphone just fine, but i need one that works with my case on it. so i guess just an adjustable one would be good...being able to turn it to landscape would be nice as well. anyone have suggestions?

    yeah but this is a custom holder for a "snug" fit...which is my problem. snug fit = doesn't fit if you have a case around your iphone. so i need one thats adjustable. im looking on amazon now and some of the reviews are so-so...so i was just wondering if there was a definitive iphone case out there.

  • CAR MOUNT / CHARGER THAT IS SIMPLE AND LOGICAL ?????

    Here's the deal... obviously most newer car stereos have an aux input. And if not, almost all aftermarket radios do. What good is an UGLY suction cup mount with a seperate wire for power ? What good is a cigarette lighter mount with no power ? Why can't someone make a simple mount that plugs into the cigarette lighter and powers the phone while holding it in place ? THAT'S ALL ! A small wire could then connect the phone to the aux jack or even the cassette if you want to go back to the 90's. We all know FM transmitters SUCK, but they insist on only offering these things with the stupid transmitter on it ! Does anyone PLEASE have a link to a car mount for the iphone that plugs into the cigarette lighter, holds it there in a mount, and provides power ?????????!!!!!!!
    Thanks.

    Belkin HAD exactly what you want and I WAS using it with my Touch. But, of course it WON'T work with the 3G. They don't seem to be on track to replace it with anything simmilar and everything I've seen is clunky in comparison.
    Here it is on Amazon:
    http://www.amazon.com/Belkin-Auto-iPod-Connector-White/dp/B00009KAPX/ref=pdbbs_sr1?ie=UTF8&s=electronics&qid=1219509454&sr=8-1
    Too bad it was great while it lasted. It has a little mini plug on the underside of the plug so mini to whatever cable goes to your input AND it has a volume control so it acts like a preamp so you can keep a balance among your device and built in radio. Sigh: What are all these manufactures thinking, when something is Made For iPod why isn't it really??
    Edit: I missed the mount part, I use a cupholder mount originaly designed for HP Ipaq (ebay) that fits great. I didn't want to put that much weight on the lighter socket, it would wear it down in time.
    Message was edited by: Joe221

  • IPhone in-car mount recommendations ?

    I've been looking around the IPhone store but I keep reading mixed reviews on the various IPhone in-car mount accessories. What I'm after is one that lets me rotate my IPhone from a vertical to horizontal position if I need to. Any recommendations ?

    Look around this site: http://www.proclipusa.com/

  • Car mount

    Ive been trying to find a suitable car mount for my maxx . I use a vacuum type windshield mount in my truck which works wonder full. The way my car is  designed that a windshield mount would be too far away for me to reach safely. Ive tried the stick on mounts but i have a really textured interior and they come unstuck in short order. Ive run across one that actually slides in the cd slot and would put the phone in an ideal location. The problem with this is it looks so flimsy that i dont think it  would last long without breaking off in the cd slot. Has anyone tried one of these or have any ideas?                                                                                                                                             Jesse

    Jaxle67 wrote:
    Ive been trying to find a suitable car mount for my maxx . I use a vacuum type windshield mount in my truck which works wonder full. The way my car is  designed that a windshield mount would be too far away for me to reach safely. Ive tried the stick on mounts but i have a really textured interior and they come unstuck in short order. Ive run across one that actually slides in the cd slot and would put the phone in an ideal location. The problem with this is it looks so flimsy that i dont think it  would last long without breaking off in the cd slot. Has anyone tried one of these or have any ideas?                                                                                                                                             Jesse
    Just a thought, I once had a friend that used a small device that routed his cell calls through his audio system speakers.
    In NY having a phone mounted in your dash would probably not be legal but a full featured bluetooth ear device is allowed for making and receiving calls.
    They are passing so many laws on cellular devices that it is hard to keep up.
    There was also some device on tv that held your phone like a sticky pad which they showed the phone within reach and yet it did not slide off the dash. They may also sell these at auto parts stores. I know Boscovs carries loads of the as seen on tv gadgets.

  • Best Car Mount Holder for iPhone 6

    I'm looking for the Best Car Mount Holder for iPhone 6, any suggestions?

    Easy, Arkon's Mobile Grip 2 has already been named "best smartphone mount" by a number of other sites.  The MG279 is the one I use.
    http://www.arkon.com/mobile-grip/iphone-smartphone-windshield-dashboard-car-moun t-holder-MG279.html
    Fits the iPhone 6 or iPhone 6 Plus, even if you're using a large Otterbox, Trident Case, Incipio Case, or other case.  Comes with a 2-year warranty.  Easy to use, spring-loaded holder.  Also features a 1/4"-20 threaded tripod pattern on the side of the holder so that you can take it off the mount and then use your iPhone 6 on any camera tripod.  I love that feature!  Less than $20 bucks...  4.5 star rated on Amazon.  http://www.amazon.com/Arkon-Windshield-Smartphone-iPhone-Samsung/dp/B00I58VAZS/r ef=sr_1_1?ie=UTF8&qid=1411326809&sr=8-1&keywords=MG279

  • Otterbox commuter case with car mount?

    I just got a Droid X, and I'd really like to get the Otterbox commuter case.  Does anyone know for sure whether it is compatible with a vehicle mount?  Otterbox website says no, but the rep at the VzW store says that car mounts have a removable insert that allows it to work.  I'd appreciate any info, especially the exact model of the car mount (if any) that works with the Otterbox.  Thanks! 

    With a little creativity and a dremel tool I was able to get the DX in the shell/holster case that Verizon sells to work. I originally had the silicone sleeve on it and it was a tight squeeze to make it work in the car dock. But me being me I wanted something that was going to add more protection for the phone and a belt clip. Took a little trial and error but now I have the best of both worlds. ..

Maybe you are looking for

  • Where can I buy Dreamweaver MX for Mac?

    Hi, I hope I'm not breaking any rules by posting this request. I've been trying to buy Dreamweaver MX for a Mac but just can't find anywhere it's for sale. I've tried Amazon and eBay - nothing. Could anyone give me any advice please? Thanks.

  • Vendor classification and sub classification

    All, we have list of vendors with classification and sub classification. They need to print the vendor line item report with these two classification.  For example Vendor abc has classification of non-raw material and sub classification of indirect m

  • How to set background image in JDesktopPane

    Hi guys, i have a jframe linked with jdesktoppane, iand i want to set a background image to the mainframe. How??

  • Thumbnails updated from Aperture to iWeb

    Many times after updating a photo that then appears in Aperture, the photo does not appear in iWeb. Even after forcing Aperture to generate the thumbnail, it seems like I must restart iWeb for the updated image to appear in iWeb. Also, I cannot figur

  • Doubt regarding ADDM report

    I want to generate ADDM report for more than 3 days as it shows 3 days by default? How to change that setting if at all it is possible?