Carriage Return and Line Feed in Receiver FTP

Hi,
what parameter needs to be used in receiver File content conversion to accomodate <CR> and <LF>
The generated file from XI is CSV format and am now used only this option in the content conversion.
record.fieldSeparator ,
I did find something like record.endseparator '0x0D"0x0A' but not sure whether this is right

If I were creating an output file, it would look something like this (this is off top of head...not from my actual code, so bug removal might be required):
types: begin of outx,
            line(1024) type c,
         end of outx.
data: out_file type table of outx.
         out_line type             outx.
data: p_field(15) type p decimals 0,
         a_field(17).
constants: gc_tab type x value '09',
                 gc_crlf(2) type x value '0D0A'. "those are zeroes...
field-symbols: <fs> type (same as your internal table),
                       <fsx> type any.
loop at internal table assigning <fs>.
   if <fs> is assigned.
      do.
      assign component sy-index of structure <fs> to <fsx>.
    if sy-subrc ne 0. "end of row encountered...exit do loop
      exit.
   endif.
* insert logic to do any data conversions (i to p to a, etc.), like:
* if sy-index eq <somenumber>.
* P_field = <fsx>. " any I field.
* a_field = p_field.
* assign a_field to   <fsx> casting type char17.
*endif.
if sy-index eq 1.
   out_line-line= <fsx>.
else.
   concatenate out_line-line <fsx> into out_line-line separated by gc_tab.
endif.
enddo.
if outline-line is not initial.
concatenate outline-line gc_crlf into outline-line.
condense out_line-line. "add no-gaps if appropriate
append out_line to out_file.
clear out_line.
endif.
endif. "is assigned
endloop."internal table
Edited by: BreakPoint on Dec 1, 2010 3:39 PM
can't spell concatenate correctly.

Similar Messages

How to find a carriage return and Line feed?

I need to detect if a crriage retunr and line feed present on each row in my text file before allowing user to upload the text file
I know how to remove them from each line but what I need is to detect them no removing them from file.
Our concern is when the a row does not have carriage return and line feed.
Is there a way to find this using CF? Please help
thanks

That is exactly the problem Dave, if some rows do not have line feed, they're not being inserted into DB, it skips other steps and go right to finish. It looks
like the file is done processing.
So I need to do early rejection to this kind of file.
I used cfloop to catch anything else that do not follow the formatting rules.
Here is what I already done:
Right after the file got uploaded, I have these codes:
<cfloop index="x" file="#MyFile#" >
<CFSETMyLine = Replace(x,chr(9),"|", "ALL")>
I'm using a few functions, such as, Left(), Mid(), Right(), etc to make sure certain rules are followed.
Up till here, it's done and tested, everything is working.
The only problem is when 1 or more rows don't end up with line feed and or carriage return.
I plan to add some codes to check the end of each row for chr(10) since it is looping for every row anyway.
If detected, process file normally otherwise stop processing.
</cfloop>
So this can't be done in CF?

XML is cluttered with carriage returns and line feeds - how to suppress?

Hi all,
at least within text paragraphs we would prefer 'clean' XML without carriage returns. Can Framemaker be configured to avoid these control character?
Below is an example of a DITA file produced by Framemaker. Evidently this is related to the Pretty Printing feature and I do admit that it increases the readability. However they cause some issues for us. Note that the carriage returns in the paragraph are at arbitrary positions, not at the end of the lines as they appear in the Framemaker editor (I inserted the word "End" at the end of the first line).
Robert

By default, FrameMaker adds a CR at around 70-80 characters unless instructed to do otherwise.
Also, soft returns (SHIFT+ENTER) are lost unless you're in a pre formatted element like a <codeblock> (which is probably why there's no CR after your "End" text.
If you want to limit the seemingly arbitrary CRs, you must tell FM where to put them. Add the following rule to the structure application rules file ..
element "p"
writer line break is 99999 characters;
…scott

Problem with "carriage Return" or "Line Feed" in a table

Hello,
I need help with the function Zeichen(), so called it in german, I'm not sure if it is char() in english.
In Pages Version 4.0.1 (746) I've created a table in Pages with this function to make an "carriage Return" in a cell.
Here an example: { ="Hello" & Zeichen(10) & "World" }, in the cell is now:
| Hello |
| World |
But in Pages Version 4.0.3 (766) this function ZEICHEN() not allow the number 10 and other till 32 (I allready read the manual and understand this problem).
Anybody an idea to make a "Carriage Return" or "Line feed" in a formular, in a cell, in a table, in Pages?
Thanks
Detlev Kormann

kdetlev wrote:
Your workaround will not be possible in my table, because there is no empty cell in the table, but I think it is also a good help too.
*In fact I forgot that you are using a table in Pages.*
Remaining on my first idea, In Numbers we may achieve the same goal using an auxiliary table with a single cell containing the needed line break.
If this table is named "LineBreak",
the formula will be:
="Hello"&LineBreak :: $A$1&"World"
*In Pages, here is my workaround:*
Enter the cell
type a§b
don't type the character § but ctrl + return.
The cell will contain
a
b
with the arrow, move before the a
type =B2&"
delete the original a
move to the right
delete the original b
type "&C7
Yvan KOENIG (VALLAURIS, France) mercredi 7 octobre 2009 17:20:04

Carriage Returns and Tabs in XML element

I have a number of carriage returns and tabs within an xml element. When I take that element I would like it to transform to html in which I am then displaying within a JEditorPane. However, when I do this it is one long string. I have tried the xml:space="preserve" within that element and this still is not working.
Here is part of the xml with the carriage return line feeds. The element that I am talking about is called pseudocode. You can see it is displayed correctly below.
Design Document XML : <?xml version="1.0" encoding="ISO-8859-1"?><design-doc><title-page><title>Testing Document</title><class-prepared-for>Lloyd</class-prepared-for><authors>Ben Garbers</authors><date-created>September 23, 2004</date-created></title-page><introduction text="This is the introduction. This is the introduction."/><class-definitions><class-definition class-name="ClassOne" visibility="public" class-complexity="not complex"><global-variables><variable visibility="public" name="VariableOne" object="String" comments="This is a String."/><variable visibility="public" name="VariableTwo" object="Integer" comments="This is an Integer."/></global-variables><methods><method name="MethodOne" synopsis="This will do some things." purpose="public" visibility="public"><input-parms><variable visibility="null" name="firstName" object="String" comments="null"/></input-parms><output-parms><variable visibility="null" name="lastName" object="String" comments="null"/></output-parms><local-variables><variable visibility="null" name="age" object="int" comments="null"/></local-variables><pseudocode xml:space="preserve">/* Ensure that player name exist in the system*/
if (player =null)
     NullPlayerException;
          if (NOT (isPlayerNameExist(player)))
               throw PlayerNameNotExistException;
          /* Ensure player name exist in the team already*/
          i ? 1;
          while (i <= length(mPlayers)) {
               if (mPlayers.mPlayerName != playerName)
                    throw PlayerNameNotExistInTeamException;
this.mPlayers ? this.mPlayers - player;</pseudocode>
However, when I do the transformation I get the following with the pseudocode:
/* Ensure that player name exist in the system*/if (player =null)     NullPlayerException;          if (NOT (isPlayerNameExist(player)))               throw PlayerNameNotExistException;          /* Ensure player name exist in the team already*/          i ? 1;          while (i <= length(mPlayers)) {               if (mPlayers[i].mPlayerName != playerName)                    throw PlayerNameNotExistInTeamException;}this.mPlayers ? this.mPlayers - player;
It looks like it adds some spaces but no carriage returns or line feeds.
My transformation code is the following:
     public ParseFile(String xmlString) {
          try {
          //Here we will load the correct style sheet for the message
          //that will be formatted.
          String urlString = "DesignDocument.xsl";
          URL url = this.getClass().getResource(urlString);
          System.out.println("URL to style sheet = " + url.toString());
          String styleSheetName = url.getFile();
          System.out.println("Style sheet name : " + styleSheetName);
          InputStream styleSheetInputStream = this.getClass().getResourceAsStream(urlString);
          //We will than load our SAXParerFactory and parse the message.
          SAXParserFactory SPFactory = SAXParserFactory.newInstance();
          SPFactory.setValidating(true);
          SAXParser sp = SPFactory.newSAXParser();
          XMLReader sax2parser = sp.getXMLReader();
          //NO Validation done on for this because we do NOT have a DTD.
          sax2parser.setFeature(
               "http://xml.org/sax/features/validation",
               false);
          sax2parser.setContentHandler(new FileContentHandler());
          //we create a character array of the length of the xml message String
          char[] messageCharacterArray =
               new char[xmlString.length()];
          // we then put the xml string into the character array.
          messageCharacterArray = xmlString.toCharArray();
          // after this ew end up creating a CharArrayReader that will be used by the Sax
          // parser to parse the xml.
          CharArrayReader xmlCharArrayReader =
               new CharArrayReader(messageCharacterArray);
          // we put the xml character array within the Input Source which will then be parsed
          // by the Sax2 parser.
          InputSource in = new InputSource(xmlCharArrayReader);
          // Use a Transformer for outputting the message into our formatted xml using
          // the stylesheet defined up in a messages own sxl stylesheet file.
          TransformerFactory tFactory = TransformerFactory.newInstance();
          tFactory.setURIResolver(new BasicURIResolver());
          StreamSource stylesource = new StreamSource(styleSheetInputStream);
          Transformer transformer = tFactory.newTransformer(stylesource);
//          transformer.setOutputProperty(OutputKeys.INDENT, "yes");
//          transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");
//          Properties properties = new Properties();
//          properties.setProperty("indent", "yes");
//          properties.setProperty("{http://xml.apache.org/xslt}indent-amount", "2");
//          transformer.setOutputProperties(properties);
          // We will use a ByteArrayOutputStream to put our transformed xml.
          ByteArrayOutputStream bos = new ByteArrayOutputStream();
          StreamResult result = new StreamResult(bos);
          SAXSource source = new SAXSource(in);
          transformer.transform(source, result);
          String s = bos.toString();
          StringBuffer sb = new StringBuffer();
          //This will make sure the Version Line is not shown.
          BufferedReader br = new BufferedReader(new StringReader(s));
          String line = "";
          while ((line = br.readLine()) != null) {
                    sb.append(line);
          bos.close();
          br.close();
          formattedXmlString = sb.toString();
          System.out.println("--------------------------------");
          System.out.println(formattedXmlString);
          System.out.println("--------------------------------");
          } catch (Exception e) {
               e.printStackTrace();
I have been searching and trying to figure this out forever. Any help would be greatly appreciated. Bottom line is that I want carriage returns and tabs to work when transferring from the xml to xsl.

I get the following line when adding the <pre> tags.
/* Ensure that player name exist in the system*/if (player =null)     NullPlayerException;          if (NOT (isPlayerNameExist(player)))               throw PlayerNameNotExistException;          /* Ensure player name exist in the team already*/          i ? 1;          while (i <= length(mPlayers)) {               if (mPlayers[i].mPlayerName != playerName)                    throw PlayerNameNotExistInTeamException;}this.mPlayers ? this.mPlayers - player;
On the screen this is shown on 1 line. It looks like the tabs are working correctly. However, the carriage return, line feeds do not seem to be working. The xml that is pushed into the transformation has the carriage returns and line feeds and is formatted correctly. There has to be something happening when the xsl takes the xml String. When I add <BR></BR> within the xml that doesn't seem to work either.
I am really sumpted. If you could help DrClap I would really be appreciated.

XSL mapping of ARTMAS IDoc - carriage returns and white space

Hi all. I have tried all sorts here and am completely stuck. I am mapping an article master ARTMAS IDoc using XSL mapping and an extra carriage return and white space characters are being added to the FIELD1 and FIELD2 fields of the E1BPE1MARAEXTRT segment and I don't know why! These fields contain all our bespoke field values joined together so they are 229 and 250 characters long respectively, which I think is related to the problem. The mapping program looks like this:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" encoding="UTF-8" omit-xml-declaration="no" indent="yes"/>
<xsl:template match="/">
<ARTMAS04>
<IDOC>
<xsl:copy-of select="//ARTMAS04/IDOC/EDI_DC40"/>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MATHEAD"/>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MARART"/>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MARAEXTRT"/>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MAKTRT"/>
<xsl:for-each select="//ARTMAS04/IDOC/E1BPE1MARCRT">
    <xsl:if test="(PLANT='D100') or (PLANT='D200') or (PLANT='D300')">
      <xsl:copy-of select="."/>
    </xsl:if>
</xsl:for-each>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MARMRT"/>
<xsl:copy-of select="//ARTMAS04/IDOC/E1BPE1MEANRT"/>
</IDOC>
</ARTMAS04>
</xsl:template>
</xsl:stylesheet>
I have a test IDoc going through this and the first 3 characters of the FIELD1 are "BIK". If I look at the source of the XML file, the problem area looks like this:
<E1BPE1MARAEXTRT SEGMENT="1">
      <FUNCTION>004</FUNCTION>
      <MATERIAL>000000000000895649</MATERIAL>
      <b><FIELD1>
        BIK</b>      0 0.00 T                                    000000001CARRERA FURY 04 20"     CARRERA FURY 04 20" 2005092420040622    X                    00000000   20031104 00200406140000000000                    0.00 0000000
      </FIELD1>
You can't really see it above, but there is a carriage return and 8 white spaces before the BIK. Where does this carriage return and white space come from?! Any help would be really appreciated - this is driving me crazy!
Many thanks,
Stuart Richards

Stuart,
I think I know the cause to your problem. I am not an XSLT programmer but based on searching this forum I found how I can acheive the carriage return at the end of my document. Your xsl statement is as follows:
<xsl:output method="xml" encoding="UTF-8" omit-xml-declaration="no" indent="yes"/>
Change the indent value from yes to no. This should remove the carraige return. Hope this works for you.
I actually need a carriage return and line feed on my document so I am still stuck. All I have acheived is the carraige return.
Thanks,
Jim

SQL Loader - CSV Data file with carraige returns and line fields

Hi,
I have a CSV data file with occasional carraige returns and line feeds in between, which throws my SQL loader script off. Sql loader, takes the characters following the carraige return as a new record and gives me error. Is there a way I could handle carraige returns and linefeeds in SQL Loader.
Please help. Thank you for your time.
This is my Sql Loader script.
load data
infile 'D:\Documents and Settings\user1\My Documents\infile.csv' "str '\r\n'"
append
into table MYSCHEMA.TABLE1
fields terminated by ','
OPTIONALLY ENCLOSED BY '"'
trailing nullcols
( NAME CHAR(4000),
field2 FILLER,
field3 FILLER,
TEST DEPT CHAR(4000)
)

You can "regexp_replace" the columns for special characters

File sender - carriage return and new line as endseparator

Hi All,
I'm stumbled with a problem to set carriage return and newline character as the endseparator (record delimiter)
Scenario: The input file PI is receiving has got few fields which has text in it and the content in this text has got newline characters. So to identify record separator, at the end of each record the combination of carriage return and new line is added.
In file sender content conversion I've set the folllowing parameters to achieve this:
Row.fieldSeparator : , (comma)
Row.endSeparator : '0x0D''0x0A'
Problem: In my sample input file, the first row has a text field with a newline character. When executed PI is splitting the record at the newline character in the text field (instead of combination of carriagereturn and newline which is set in the endSeparator paramter).
Pls advice on how to resolve this .
Happy Holidays!!
amar

Rajesh..Thanks for your quick response
I'm trying with the actual file being provided by the trading partner. I did not generate the file nor changed the file..
Before identifying the combination of carraige return and new line, the adapter is splitting the record when encountered with new line character within one of the text fields.
As you said it worked for you, you do have new line characters within fields in a record?..pls throw some light..let me know for any information..
Thank you
amar--

How to retain carriage return and spaces in a report..

Hi everyone,
I have a TEXT AREA where users enter comments in that like
First record
Hi           Carriage returns          spaces
Second record
Hi
carriage returns
spaces
Third record
Hi
     carriage returns
                             spaces
Is it possible to retain the carriage returns and spaces when i am displaying the records in a report.
For carriage returns i replaced chr(10) with '
(without the single quotes). I works fine. But how i can i retain the spacesplease give me some suggestions
Thanks
phani

Hi dimitri,
Thanks for the reply
For carriage returns i am doing like this replace(column_name,chr(10),'<"br">') (Ignore the double quotes)
For spaces is there any ASCII code like chr(10) for carriage returns..
I mean how to identify Number of spaces in database..
Thanks
phani
Message was edited by:
phani marella

Search for multiple values separated by carriage return and not commas

I have developed a report in BI Publisher that allows a user to enter multiple values that are separated by commas.
Is there any way of entering multiple values that are separated by carriage return and not commas?
Any help would be appreciated.
Thanks

Here below, without function :
SQL> with tbl as
2 (select 0 c1, 'j' c2 from dual union all
3   select 1 c1, 'k' c2 from dual union all
4   select 2 c1, 'l' c2 from dual union all
5   select 3 c1, 'm' c2 from dual union all
6   select 4 c1, 'n' c2 from dual )
7 select *
8 from   tbl
9 where   c1 in (select substr(mystring,instr(mystring,',',1,rownum)+1,instr(mystring,',',1,rownum+1)-instr(mystring,',',1,rownum)-1)
10                 from   (select ','||'&str'||',' mystring from dual)
11                 connect by level <= length(mystring)-length(replace(mystring,','))-1);
Enter value for str: 1,2,3
old 10:                from   (select ','||'&str'||',' mystring from dual)
new 10:                from   (select ','||'1,2,3'||',' mystring from dual)
        C1 C
         1 k
         2 l
         3 m
SQL> /
Enter value for str: 0
old 10:                from   (select ','||'&str'||',' mystring from dual)
new 10:                from   (select ','||'0'||',' mystring from dual)
        C1 C
         0 j
SQL> Nicolas.

Carriage Return in line Text for invoice line item.

Hi,
I am trying to create an non PO invoice through calling a BAPI "BAPI_INVOICE_CREATE"
in which i am passing all the required data . I have a field called "SGTXT" which is item text and i am passing this field
which has maximum length of 50 char i just want to add a new line characters on to it. i.e want to support Carriage Return
just want to know whether it can hold Carrige Return.
I just tried by entering some Characters and hitting Enter the value which i am passing is simillar to
itemtext
"abcdabcdabcdabcd#
abacdabcdabcd#
abcdabcd"   My program is not able to parse this values hence landing into dump.
How should i support this scenario.
Thanks,

Here is the dump.
The termination occurred in the ABAP program "SAPLZIBA_SSP_READ_CSV" in
"LINE_TO_CELL_ESC_SEP".
The main program was "ZIBA_SSP_INVOICELOAD ".
The termination occurred in line 149 of the source code of the (Include)
program "LZIBA_SSP_READ_CSVF01"
of the source code of program "LZIBA_SSP_READ_CSVF01" (when calling the
editor 1490).
        IF i_string CS l_pipe.
          l_stringlength = strlen( i_string ).
          DO l_stringlength TIMES.
            REPLACE ' ' WITH '""' INTO i_string.
            IF sy-subrc NE 0.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
        ASSIGN I_STRING(L_INT) TO <L_CELL>.
        I_INTERN_VALUE = <L_CELL>.
      endif.
      L_INT = L_INT + 2.
      I_SIC_INT = L_INT.
      I_STRING = I_STRING+L_INT.
    ELSEIF I_STRING CS C_ESC.
    letzte Celle
      L_INT = SY-FDPOS.
      if l_int = 0.
        clear i_intern_value.
      else.
        ASSIGN I_STRING(L_INT) TO <L_CELL>.
        I_INTERN_VALUE = <L_CELL>.
      endif.
      L_INT = L_INT + 1.
      I_SIC_INT = L_INT.
      I_STRING = I_STRING+L_INT.
      L_INT = STRLEN( I_STRING ).
      IF L_INT > 0 . MESSAGE X001(KX) . ENDIF.
    ELSE.
      MESSAGE X001(KX) . "was ist mit csv-Format
    ENDIF.
ENDIF.
Can you let me knwo how should i put my condition to support CR .
thanks,

File adapter and line feeds

Hi,
we need to produce a flat file using the content conversion of the file adapter without any line feed (the target structure is a complex one with several record types).
Example
What we get now:
*AAheaderA
*ABheaderB
*BAItem1
*CAsubitem1
*BAItem2
What we need:
AAheaderAABheaderBBAItem1CAsubitem1*BAItem2
It seems that with NameA.endSeparator parameter you can only add a new character, but I need to delete the line feed.
Is it possible with standard file adapter or do we need do create our own module with java?
Thank you.

Hi Stefano,
So you Basically want to do content conversion at the receiver end and that is basically to get the entire data in one line.For that please go through these links below.It clearly explains your requirement.
<a href="/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion Receiver with Content Conversion</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm">Converting File Content in the Receiver Adapter</a>
carefully make a note of the "The endSeparator parameter.
Regards,
abhy

Storing carriage return and other special characters in a TestStand variable and passing to LabVIEW

I am using TestStand step to call a LabVIEW VI that writes commands to a serial device. The device expects a carriage return at the end of the command. I can create a constant string in TestStand with the carriage return, e.g., "ATA\x0D" and pass that to a LabVIEW string control which shows ATA\r and the VI works properly.
To provide consistency and flexibility in my code, I want to store the terminator character(s) in a TestStand variable. However, when I try to use an expression to create the command string, i.e. "ATA" + "Locals.Terminator", where Locals.Terminator is set to "\x0D", my LabVIEW VI string control shows "ATA\\x0D" which doesn't work. And when I try Locals.Terminator set to "\r", the LabVIEW string control shows "ATA\\r" which doesn't work either.
Is there a way to store special characters in a TestStand variable and pass them to LabVIEW as special characters? I saw in another post that if you edit the TestStand variable by pressing Cntl-Enter, it will store the newline \n properly and it can be sent to LabVIEW - that works for me as well for \n. But I need to send a carriage return.
I've attached my test sequence and the corresponding LabVIEW VI with a string control.
Hans
Attachments:
Special Chars.seq ‏27 KB
String Passing.vi ‏13 KB

Hi Hans,
Thanks for your detailed explanation and examples. In TestStand, change the String parameter's String Type to Binary String instead of ASCII. Then it will pass the desired value.
Cheers,
David Goldberg
National Instruments
Software R&D

Text mode opened file and line feed

Good morning:
I have open a file in text mode and i need to send an OD0A hexadecimal characters to another system in each line, if i try to put 0D0A it makes a double line feed and if i only put 0D it doesn´t interpretate 0D like hexadecimal characters, i know that if i open the file with binary mode it would be very easy, but it is a code shared with another programs, so i rather not to change. Does anybody has made that in text mode in any occasion?.
Thanks in advance
Regards

i have open the file in binary mode

Email content line feeds using receiver mail adapter - HELP!

Hi all,
I have read the threads on how to download the XSD from SAP for creating a mail message type with dynamic To and From addresses and this is working fine. However, I am unable to create multiple lines in my mail message. I have the following parameters in my config:
XML2Plain - Transform.Class - com.sap.aii.messaging.adapter.Conversion
XML2Plain - Tansform.ContentType - text/plain;charset=utf-8
XML2Plain - xml.conversionType - SimpleXML2Plain
XML2Plain - xml.addHeaderLine - 0
XML2Plain - xml.fieldFixedLengths - 12,150
XML2Plain - xml.fixedLengthTooShortHandling - Cut
XML2Plain - xml.fieldSeparator - '0x0D''0x0A'
I have not changed the message type in the Design so the mapped Content field currently just contains one long line of 162 characters (as does the resulting email). I want 12 characters on the first line and 150 characters on the second line. Do I need to concatenate something between by 12-character and 150-character strings to achieve this? Do I need a line.Separator parameter in my module configuration?
Many thanks,
Stuart Richards

Hi Sreeramulu,
As mentioned by Lucas, you can use the UDF. Inn addition to that, you need to define the Variable Headers under Variable transport binding after enabling the Adapter Specific Message Attributes.
For the Enabling ASMA, follow the below steps and check for the variable attributes.
Select the Advanced tab page.
   To save adapter-specific attributes in the message header of the XI message, select Use Adapter-Specific Message Attributes and Variable Transport Binding.
The following attributes in the message header are then available for processing:
○       User: (technical name: TServerLocation)
○       Authentication key: (technical name: TAuthKey)
The following mail header fields are available for processing:
○       From: (technical name: THeaderFROM)
○       To: (technical name: THeaderTO)
○       Cc: (technical name: THeaderCC)
○       Bcc: (technical name: THeaderBCC)
○       Subject: (technical name: THeaderSUBJECT)
○       Reference to the mail that is to be replied to: (technical name: THeaderIN-REPLY-TO)
○       Reply to: (technical name: THeaderREPLY-TO)
○       Mail client program: (technical name: THeaderX-MAILER)
○       Send confirmation of receipt: (technical name: THeaderDISPOSITION-NOTIFICATION-TO)
○       Priority: (technical name: THeaderPRIORITY)
○       Importance of message: (technical name: THeaderIMPORTANCE)
   To transfer further header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, and XHeaderName3.
The parameters are included in the mail header under the names specified here.
The attribute namespace for the adapter is http://sap.com/xi/XI/System/Mail.
Thanks,

Carriage Return and Line Feed in Receiver FTP

Similar Messages

Maybe you are looking for