Carryforward PR/PO Commitments document-wise

Dear Sir,
Is there any T.code or program through which we can carryforward PR and PO commitments seperately and also by PR/PO document wise. In the same way, we also need to carryforward the budget with the selection of WBS.
Regards
Mudit Gupta

Sir,
This is true that these transactions works only for Project, Netowrk Commitments
But we need to carry forward for WBS i.e. if there are 4 PR's and 6 PO's on one WBS, we may be able to carry only 2 Pr's and 4 PO's by putting the same WBS.
Regards
Mudit Gupta

Similar Messages

Stock reservation report For customer wise and Document wise

Dear sd experts ...
In my company we have kept some reserved stock to some customers By using MB1B-412E M.type now Requirement is I want to see how much stock kept in reservation for Customers and Document wise also
I Have checked in CO09 But not possible and MCTA also
plz guide me how to find

did you try MMBE ?
also check MB5B, MD04, MB5T

List of incomplete sale orders according to the sales document wise

Hi Gurus
can any body suggest me the tcode to find the incomplete sales orders according to the sales document wise
regards
satish

Hi,
Please run T/code V.02 to see incomplete sales orders.
Regards,
Jaiprakash.P.T

Function Module For Customer Receivable Invoice Document Wise

Dear All,
Is there a standard Function Module / BAPI available for calculating Customer Receivable amount invoice document wise? I will explain the scenario in greater detail:
1) Invoice is booked against customer (FB70 / SD Interface)
2) Receipt is made (F-28 )
3) Matching of invoice is done at the time of receipt (either partial or residual)
4) Customer Account Clearing is done (F-32)
We have explored tables BSID,BSAD,BSEG and BSE_CLR, but are unable to decipher the exact logic by which the System is storing the cleared amount, invoice document wise. We have tried referring to BSEG-REBZG (Invoice Reference) and BSE_CLR for finding out the clearing document and thus arriving at the invoice document balance, but the table entries are not similar in case of partial and residual payment and hence it is creating problem in deducing the actual invoice wise open balance. Can anyone refer to some FM / API / Logic for deducing the same?
Your inputs will be sincerely appreciated.
Thanks and Sincere Regards,
Amitabha

Hi People,
Any ideas?
Thanks and Sincere regards,
Amitabha

Journal Document wise report T.Code

Hi
I want Journal Document wise report. how to i can view that report.
related to document.
Ashok lkumar

Hi
Please try S_ALR_87012291 or S_ALR_87012287
Regards,
K Lakshmanan

Purchase document wise pricing procedure

Can i have pricing procedure Purchasing document type wise..
For eg.......If ZNB1 is the document type then RM1000 should be pricing, If ZNB2 then RM110000 should be pricing procedure..
Right now it triggers with the help of schema group vendor.....

Hi,
so if i have a same vendor for Domestic as well as service
If i have doc type : ZNB1 for Domestic, ZNB2 for Servie PO's....
....i have to create 2 vendor code (Doemestic & service)
why you can not manage with one vendor for service and domestic?
can you explain which condition type you can not manage in your pricing procedure so you want separate pricing for service vendor?
you create your pricing procedure in such way that it include all condition for vendor .
Regards
Kailas Ugale

In BI SD how to get Sales Document wise Order Delivery and balance Quantity

We are on the verge of SAP BI implementation. We are facing a problem as in BI we have to
show Sales Order wise - Order Quantity then associated all the deliveries and the Quantity delivered
and finally Billed Quantity
Format Required is
Order No Order Qty Delivery Qty Billed Qty
We are using 0sd_c03 cube here Order , delivery and Billing come as separate Line items
Now bringing them to one line item is a chellange for us
can any body help us
Thanks
Shivani

Hi,
Merging of Order, delivery and billing information is not so easy.
In ECC we have a new datasource for Open order quntity against delivery available check those datasources once may be useful.
[Extraction SD Sales: Order Delivery|http://help.sap.com/saphelp_nw04/helpdata/en/21/ca6d07d5b807459ec8957dad97c179/frameset.htm]
--> This datasouce provides information regarding order qty, delivered qty and status. But no billing related information available.
--> Pull billing information into a separate datasource and merge using sales doc no (with reference doc no in billing). to get billing related info.
--> Multiple orders can be billed together, so distribution may not be correct. check ...
Hope it helps
Srini

Creating spection lot material document wise.

Dear Friends,
There is one RM having batch management active, now when i do GR against PO client need to split the quantity to say 25 batches ( ex. 5 tons paper received but there may be 25 roles of 200 kg each having each one separate batch no.) . So going by std process, system is creating 25 insp. lots. My requirement is system should generate only one lot per material document. ( since batch management is active , in Quality view of material master in insp setup system is allowing only for each material document item or material doc and batch). Pl guide me is it possible to create singe inspection lot for split GR with batch management active.
Since there is no fix quantity of roles coming in truck using of skip inspection won't seem to be right choice. Pl correct if it is other way.
Best Regards
Shekhar Mokashi

Dear Shekhar
In that case Skip will not also work as you may not have a picture of the stokc coming etc.
I dont have a solution for this now. What i can suggest is make use of user exits in this case. Try using this exits and check whether it can help you or else check the exit in MIGO. Give a login in such a way that only for the first line item or so the inspection lot is created
QAAT0002 Control of acceptance lots/goods receipt
| QBCK0001 |Enhancements to function module group QBCK
| QBCK0002 |Extended check in procurement
QBCK0003 |Extended QM check for goods receipt
Regards
Gajesh

Import, edit, and export QuickTime document: wise? how to maintain quality?

Can iMovie HD 6.0.3 be used to import a reasonably-high-quality QuickTime file (Apple Graphics compression), edit it, and export to Quicktime, all resulting in a QuickTime file with the same clarity as the original?
I have a quicktime file that captures a demonstration on my desktop. It was recorded with SnapZ Pro (with movie option) into this format: Apple Graphics, 889 x 500, 256, IMA 4:1, Mono, 22.050 kHz. (Note: I got 889x500 when I constrained SnapZ to a 16x9 format.)
I need to clip out sections, rerecord some of the audio, insert snippets of replacement video (re-recorded). I have Quicktime 7.1.3 Pro, but I had this idea it would be easier to do this editing with IMovie HD 6.0.3.
My problem is that everything I export has noticeably worse quality than the original source. I have tried all sorts of projects (DV, HDV, MPEG-4, ISight). I've tried exports at full quality, lower quality, various expert settings.
For example:
- Create a DV-Widescreen project.
- Import the movie. What I see on the screen is slightly smaller (in both dimensions) than the QuickTime Player shows me, and quite noticeably blurrier.
- Picking Expert export, I use Compression: Graphics, Depth: Color, Quality: Best, key frame rate 24, Dimensions 889x500, Scale: Letterbox.
- The QuickTime file displays as the right size, with a tiny black border for letterboxing, and with crummy quality (text has shadows, making it worse than just blurry.) All this despite being 30MB from a 3.2MB original.
Quite likely, I'm using the wrong tool. I don't have a camcorder - I don't even have a TV - so I don't know any of the jargon. What would be the right tool for this task? Stick to Quicktime Pro?
MacBook Mac OS X (10.4.8)

How would Final Cut Express work for editing quicktime as above?
same answer:
FCE handles dv/NTSC/PAL only ...-
for sure, you can import "any format/res" ...- with loss of quality, if import doesn't fit standards...- and: FCE is the "more mightier" tool, means, you can easiely arrange two/many videos in one picture, arrange them, position them ...-
if you want to stay with your original settings, you have to use QTpro (less convenient) or FCP (less cheap) ...

Restricing Order reason as per the sales document wise

While creating the Rush order,I want restrict list of order reasons instaed of seeing all the reasons. (I.e I want to restrict value range of source table TVAU)
Please suggest we can restrict with user exit. If possible let me know the coding ligic.
Reg,
Madhu

Hi,
I do not think so that you can restrict it at Customization Level.
However if you must require this scenario, then go for the USER EXIT. There you can do anything you want.
Regards,
Vishal

Open PO Commitments carryforward

Hi Experts
We are implementing FM-BCS. As per our Business requirement at the year end, we need to carryforward open PO commitments to next year.
I have tried the same by using T.Code FMJ2 and Open PO commitments are successfully carry forwarded to next fiscal year.
When I checked the same in Budget availability Report the opem commitment amount got reduced from consumable and consumed amount in sender year (2011) and the same open commitment amount got increased in consumable and consumed amount in receiver fiscal year (2012). And also the amount got reduced in sender fiscal year with period 16 (we are using fiscal variant V3). But it should be updated with period 12 (fiscal year 2011)instead of 16th period.
Please suggest Why it is updated with 16th period? And also why open commitment amount got reduced in sender fiscal year (2011)?
Please suggest the process.
Thanks in advance.
Rao

Hello,
The commitment carried forward debits the budget in the new year. This is documented in the online help and also in the technical documentation of FMJ2.
Regarding to the posting period in the sender year, the system uses the fiscal year variant associated to your FM Area. To calculate the period, the system adds the number special periods to the last 'normal' period defined in the fiscal year variant.
Technically, the system reads table T009 and adds values of fields ANZBP and ANZSP together.
hope this answers your questions
cheers,
Mar

Carryforward parked FI documents

Is it possible to carryforward a parked FI document to a new fiscal year? I have looked at a lot of documentation and it appears as if the parked document should really be deleted. But, what we have told users is to change the posting date to the new year when the previous fiscal year is closed. This works well for those documents that may have recently been created but did not complete workflow before fiscal year end.
I looked at transaction FMJ2. But, for value type, there is not a choice for "60" (parked documents). I went through the IMG to figure out if I need to set something there but could not find anything.

Hi Monique,
just a couple of questions:
Are you using the standard business object FIPP and the standard WF template? And, could you please investigate with your WF admin and find how events FIPP.REJECTED and FIPP.DELETED are being handled in your Workflow?
And, regarding to parked documents, yes, the usual procedure is to approve or reject/delete them before the year end. If you want to move the parked document to the next fiscal year, the options would be:
- Change the posting date to the new fiscal year: this would reduce budget in the new fiscal year. If you want to reduce budget in a different date, you could use transaction FMOD or EXIT_SAPLFMFA_004 if PBET is active in your update profile.
- If the parked document is included in a document chain, you can carryforward the document chain (with or without budget)
Thanks!
Kind regards, Mar.

Commitment carryforward(Payment budget) error

Hello,
While trying to carryforward commitments via FMJ2(for chain documents) the system gave the following error message (select at least one line).There was no line that i could select besides the actual purchase requisition/order line .I highlighted the PR/PO line but the error continued.
I have been unable to carryforward the open commitments from the last fiscal year to the new one because of this error.Will appreciate ideas
Regards

Hi have made some progress on the issue but am now having issues with downpayment carryforward.
In transaction fmj_anz (carryforward down payment & downpayment clearing)i keep getting the message that valuetype 61(downpayment) is not allowed for carryforward
I have gone through the config settings in BCS- commitment closing operations.I have been able to assign downpayments value type in all areas but in enter settings for commitment carryforward payment budget
Its not available in the valutype field for selection.
Any suggestions will be highly appreciated.
Regards

Internal Order - carryforward MIRO Invoice against MIGO receipt

Hi,
I have created an internal order (TCode KO04 & KO21 )
Allocated full budget for year 2007
Then I have linked it to an asset.
A Purchase Order is made with link to the asset.
A Goods receipt (MIGO) entry also was created against the PO
All these transactions are done in F.year 2007
At this point, the year-end procedure has completed.
For the internal order, when I try to do KOCO , zero amount is shown in the carryforward
because the actuals are posted by GRN.
When I do KOCF, there is no commitments to be carried forward to 2008.
Now I want to post the MIRO invoice agaist the above PO in period 01 of fyear 2008.
The system gives error - " The internal Order has no budget in 2008"
Since the GRN was done in 2007, I thought the Invoice should go through.
Now why the system is checking for budget in 2008 and giving the error ?
Help from anyone would be appreciated.

Hi William,
You did the following steps:
A Purchase Order is made with link to the asset. not the internal order???
A Goods receipt (MIGO) entry also was created against the PO
All these transactions are done in F.year 2007
I think the proces is now completed
The PO create the commitment (the budget is used)
The MIRO place the commitment on 0 an post actual values. (the budget is still used)
Result
No values for carryforward Budget and commitments
Now I want to post the MIRO invoice agaist the above PO in period 01 of fyear 2008
Is this second time that you make the same posting???
There is no budget you used it already in 2007 and you get the error The internal Order has no budget in 2008
I think when I follow your process the system is working perferc and make it impossible to go over budget with your second invoice

Query for Item wise sales report

Hi Guys,
Below is the query i have used to run Sales Register.
But we need Item wise sales register and those Excise Duty calculations are needed for item wise instead of total document wise. Pls update the query ...
SELECT M.DocNum AS 'Inv.No ', M.DocDate as 'Date', M.CardName as 'Customer Name',L.Dscription,L.Quantity,L.Price,
(Select Sum(LineTotal) FROM INV1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)',
(SELECT Avg(TaxRate) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=1 and DocEntry=M.DocEntry) as ' VAT (Rs.) ',
(SELECT Avg(TaxRate) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=4 and DocEntry=M.DocEntry) as ' CST (Rs.) ',
(SELECT Avg(TaxRate) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=7 and DocEntry=M.DocEntry) as ' TAXEXEMPT ',
(SELECT Avg(TaxRate) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as ' VAT% ',
(SELECT Sum(TaxSum) FROM INV4 where statype=8 and DocEntry=M.DocEntry) as 'VAT12.5 ',
(SELECT Avg(TaxRate) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST 2% ',
(SELECT Sum(TaxSum) FROM INV4 where statype=9 and DocEntry=M.DocEntry) as ' CST @2 ',
(SELECT Avg(TaxRate) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=11 and DocEntry=M.DocEntry) as ' CENVCST ',
(SELECT Avg(TaxRate) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=-90 and DocEntry=M.DocEntry) as ' BED ',
(SELECT Avg(TaxRate) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess% ',
(SELECT Sum(TaxSum) FROM INV4 where statype=-60 and DocEntry=M.DocEntry) as ' Cess ',
(SELECT Avg(TaxRate) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' HCess % ',
(SELECT Sum(TaxSum) FROM INV4 where statype=-55 and DocEntry=M.DocEntry) as ' Hcess ', L.LineTotal as 'Row Total (Rs.)',M.DocTotal as 'Doc Total'
FROM OINV M LEFT OUTER JOIN INV1 L on L.DocEntry=M.DocEntry LEFT OUTER JOIN INV4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum LEFT OUTER JOIN INV5 J ON M.DocEntry = J.AbsEntry LEFT OUTER JOIN INV3 Q ON M.DocEntry = Q.DocEntry
WHERE (M.DocDate >= '[%0]' AND M.DocDate <= '[%1]') AND TargetType ! = 14
GROUP BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal
ORDER BY M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,L.Dscription,L.Quantity,L.Price,L.LineTotal,M.DocTotal

Hi experts..
Pls Update the Query

Carryforward PR/PO Commitments document-wise

Similar Messages

Maybe you are looking for