CAS can't access SMS_CAS & SMS_SITE

Any SCCM expert have ever seen this problem? I have an open case with Microsoft SCCM 2012 but so far, they haven't been able to figure it out!
My environment in test (it's been up & running for 2 months at least):
- Server 2012 R2 Standard
- SCCM 2012 R2 CU1
- SQL 2012 Standard SP1
· 1 CAS
· 1 x Primary
· Remote SQL either on CAS or Primary
From CAS, log-in as SCCM Admin Service Account (as Domain Admins), SCCM Admin Service Account can't access SMS_CAS & SMS_SITE
Message (see my attached pictures):
Windows cannot access \\sccmcas01\SMS_CAS
You do not have permission to access \\sccmcas01\SMS_CAS. Contact your network administrator to request access.
Windows cannot access \\sccmcas01\SMS_SITE
You do not have permission to access \\sccmcas01\SMS_SITE. Contact your network administrator to request access.
BUT from Primary Site: there's no problem access
\\sccmcas01\SMS_CAS
\\sccmcas01\SMS_SITE
And I just stood up my production (3 days ago), haven't deploy the SCCM client yet just finished setting up boundaries, AD discovery, etc.
The same problem occurs as well.
Did I miss something here? OR new undiscovered bugs either in Windows Server 2012 R2 Standard or SCCM 2012 R2.
Here's the thing, even my home SCCM 2012 R2 also does the same thing, at work in test environment same thing, even new setup in production is same thing can't access that 2 directories from CAS. So I think either I did wrong on all 3 of them OR something
else...
No problem from CAS accessing \\sccmcas01\c$
I really appreciated any help on this. It's been one week. Thanks, Reza
Reza Prawirasatya

Thanks to my LinkedIn SCCM Experts!
I asked around my Linkedin friend (last Firday) and at least 5 of them said
“NO way that you have access to CAS its own share! (\\sccmcasservername\SMS_CAS &\\sccmcasservername\SMS_SITE)”
BUT there’s one of my LinkedIn SCCM Expert this morning pointed out to do this.
Here's the question, is this by design (Server 2012 R2 Standard) to blocked this directory from CAS? 
I always turn off UAC on CAS, Primary Site, Remote SQL for CAS & Primary Site, Another MP/DP with PXE server.
I follow his suggestions and it worked.
From: CAS
Go to Run: secpol.msc
then follow my screenshots below (I tried it first at home (on Hyper-V))
Reza Prawirasatya

Similar Messages

  • I can´t access EAC by CAS name server

    Hi people,
    I´ve just installed my new Exchange 2013 SP1 environment in a new domain.
    I´ve installed two Mailbox server and two Client Access servers, I´ve started the installation with two mailbox serves and to continue I´ve installed the Client Access servers. When I finished the installation in each server I restarted it.
    Now, my problema is the Access to Exchange Administration Center.
    I´m trying with https://servercas1.domain.local/ecp or
    https://servercas2.domain.local/ecp
    In both cases, Internet explorer sais "this page can´t be displayed"
    I´ve checked the Ecpvirtualdirectory in PowerShell, and internal url is correct:
    https://servercas1.domain.local/ecp in the first CAS and
    https://servercas2.domain.local/ecp in the second CAS.
    I´ve tried Access by IP, but with the same result...
    Finally, I´ve tried the Access with https://localhost/ecp and it Works!
    But... I want to Access by name, no by localhost....
    Someone knows why I can´t Access by name??
    I understand the Access to EAC is only possible through the CAS, because in the Mailbox doesnt work it, right?
    Thanks and Best regards.

    Hi Allen,
    First of all, thanks for your reply.
    In my first message I wrote about my Environment, this is:
    - 2 Servers DCs (2012 R2 with 2012R domain/forest level)
    - 2 Servers Mailboxes Exchange Server 2013 SP1 (Windows Server 2012 R2)
    - 2 Servers Client Access Exchange Server 2013 SP1 (Windows Server 2012 R2)
    My stepts to installation were:
    1.- Install new DC and create new domain. After this install second DC in the same domain.
    2.- Install OS in 4 servers for Exchange with Windows Server 2012 R2. Join these servers in domain.
    3.- Install Prerequisites in 4 Exchange Servers:
    Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt,
    RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext,
    Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
    4.- Install Microsoft Unified Communications Managed API 4.0 in 4 Exchange Servers.
    5.- Install Microsoft Office 2010 Filter Pack x64 and SP1 only in 2 Mailbox Servers
    6.- Extend Active Directory Schema: 
    Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    7.- Prepare Active Directory:
    Setup.exe /PrepareAD /OrganizationName:"Exchange Organization" /IAcceptExchangeServerLicenseTerms
    8.- Prepare Domain:
    setup /PrepareAD /IAcceptExchangeServerLicenseTerms
    9.- Install Exchange Server 2013 SP1 in 2 Mailbox Servers
    10.- Install Exchange Server 2013 SP1 in 2 Client Access Servers
    11.- Reboot all Exchange Servers when finished the installation
    After this, when I tried to access to Exchange Admin Center with https://servercas1.domain.local/ecp or https://servercas2.domain.local/ecp 
    It fails with "this page can´t be displayed"
    Only worked with https://localhost/ecp
    In this moment is when I decided to write in the forum to share my problem. And I follow your recommendations...
    But in this moment I can´t access Exchange Admin Center, about a problem with authentication...
    This is the result for Get-EcpVirtualDirectory | FL Identity,*auth*,*URL*
    Identity                      : servercas1\ecp (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    InternalUrl                   : https://servercas1.domain.local/ecp
    ExternalUrl                   :
    Identity                      : servercas2\ecp (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    InternalUrl                   : https://servercas2.domain.local/ecp
    ExternalUrl                   :
    I don´t have ayn problem with DNS... It works!
    Thanks for your reply
    Best Regards,

  • How can I access my iCloud account on the web from my phone

    how can I access my iCloud account on the web from my phone
    iPhone 5 iOS 8.3
    I have iCloud turned on, location services on, find my phone works but when I try to access iCloud via Safari on the phone it takes me to a page Apple.com,
    iCloud then three options
    set up iCloud on my phone (i have)
    Install Find my phone, it is installed and it works from my MBP
    or install find my friends, I don't need that I have no friends.
    my calendars and contacts and bookmarks and all are all sync'd and working on the phone, but i thought if I typed in iCloud.com on the phone in Safari I would go to my iCloud web page that looks like this on my Mac.
    Is that NOT how iCloud should/would look on my phone via Safari?
    This is maybe a dumb question after 3+ year of iPhone'ing
    thank you for clarifying or helping me to understand
    jojoguitar_mmn_usa

    I've been playing with a Galaxy here at work and here's what I've found so far - please feel free to jump in and suggest alternative methods to configure or access the various icloud components.
    So the original Q: Can you access your icloud account on Android?
    Not entirely: the website can't be used from an android browser (not properly - even with Dolphin HD and posing as different browsers it won't load correctly.  So Find my iphone is out, so is the address book or looking at your e-mail or calendar just in a browser window
    I was able to setup my e-mail using the IMAP settings published here:
    http://support.apple.com/kb/HT4864
    Be sure to setup the account manually - and note if you have trouble using SSL try TLS (that worked for me)
    Address book is a no go so you'll have to use iTunes to sync all your contacts over to Gmail - if you still have an iPad it means managing contacts in two places though .  Same goes for your calendar - transfer it to Gmail and forget about iCloud's calendar.  Nice instructions here: http://howto.cnet.com/8301-11310_39-20064060-285/how-to-switch-from-iphone-to-an droid/
    iWork is an Apple proprietary bit so don't expect much there.
    So in my case, if I'm really going to make the switch to a Galaxy from my iPhone it really means I'm going to have to switch to using google as the backend.  The timing to swap over to a galaxy/android phone is not the greatest - given that I'd have to give up my Apple addiction (syncing photos and itunes and losing access to my device tracking).  Plus I still have an iPad and a mac and like living in the Apple ecosystem.  I think I'll wait and see what the new iPhone looks like before I commit

  • Can only access emails through OWA after migration from exchange 2007 to 2013

    can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
    needed RCA ... plz help..

    Hi,
    From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
    In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed

    I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed edit
    Details

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

    Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Can't access the music on my iPod, iTunes freezes up

    Hello out there, I have a problem with my fifth generation 30 GB iPod video. It has worked like a dream until yesterday. I plugged my iPod into my computer (HP laptop running Windows Vista) and it showed up in iTunes as usual. I dragged three albums onto my iPod and it did the usual routine of updating. When it was done I clicked the eject symbol in the iTunes menu and waited for the battery to show on the iPod screen before disconnecting. I turned on the iPod to listen to these new tunes and now my iPod appears to be blank. Under artists, albums, songs, etc there are no longer any options.
    Okay, I have the day off from work so I figure I'll just sync it back up and put all 30 gigs back on. I plug the iPod in, iTunes opens automatically, and then freezes. After unplugging the iPod itunes resumes working. I try this several more times, restart the computer, restart the iPod, etc and it keeps doing the same thing.
    Frustrated (as this happened once before with a much older iPod several years ago) I headed over to these forums. From looking around I saw the five R's that are always suggested. After reseting, retrying, and restarting, the problem still persists: I can't access the music on my ipod, and itunes freezes.
    I then updated to the newest version of itunes. This also did nothing to solve the problem. I want to attempt to restore my ipod, unfortunately this is not possible because I can't access the iPod options through itunes because it freezes as soon as the ipod is attached to the computer.
    After reading several threads on these support forums I stumbled on this one: (http://discussions.apple.com/thread.jspa?threadID=1480926&tstart=0) in which a user recommends downloading an alternative iPod manager. I followed the link in that thread and settled on a program called poddox, hoping I could just throw all my music back onto my iPod with it. So I again plugged in my ipod, waited for itunes to freeze, closed it as it was not responding, and opened podox. Podox reported that all of my music is still on the iPod (it says there is less than 200 megs of space available).
    Unfortunately poddox won't work for me either. Upon attempting to use it to remove all the data on my ipod my computer crashed and restarted. This is strange because although itunes freezes when the ipod is plugged in, it still appears as a removable disk in windows.
    I returned to the apple website and downloaded and older, seperate ipod updater software from 2006. I installed the software and it restarted my computer. When I ran the ipod updater I received a message informing me that this software was no longer supported and that if i wanted to update my ipod's software or restore it I should just do it through itunes v.7 or later. The program then quits, and I have no choice.
    I'm about ready to pull my hair out here. What can I do? It seems like a real catch 22 in that I need to restore my ipod for itunes to recognize it but i can't restore it because itunes doesn't recognize it. From what I gather there is no way to restore it without using itunes, is this accurate? What can I do to either delete all the data on my pod and reload it, or make it appear again in my ipod's menu/interface? Any help you guys can give is greatly appreciated, I will be monitoring the responses to this thread in case anyone should need more information from me. Thanks again.

    right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

  • I can't access most .mil sites pretty sure I just need it to let me add the security exception but it doesn't give me the option anymore.

    Ever since I got the last two updates for Firefox I can't access most .mil sites like ako or even the us army library Europe site. These sites use to come up as untrusted sites that I just accepted and continued life. However now it goes straight to server not found page. I know the site links and bookmarks are good because they are what I used to use. I've read some of the other help situations that are similar and I can see some of the old certificates in the advanced options up nothing I've done in there had changed anything.

    To try to distinguish between a change in Firefox and a problem in your settings, could you do a three-minute experiment?
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    ''Be careful not to delete anything in this dialog.''
    Any time you want to switch profiles, exit Firefox and return to this dialog.
    Click the Create Profile button, assign a name like Sept9, and skip the option to change the folder location. Then start Firefox in the new profile you created.
    Do the sites work any differently?
    When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • Can't access Time Machine files since upgrading to Mavericks

    I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found.  I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade.  The issue I'm having is that I can't access the backed-up files in any way. 
    When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc".  It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning).  If it wasn't writing to the disc, it would have showed me an error of some sort.
    What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend.  I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it.  Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
    If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

    Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
    I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
    I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
    I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
    My present Mac,  a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
    However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
    I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
    Message was edited by: briinoz

  • Discoverer Report  Can i Access these report vie Internet

    Dear Sir,
    Can i access the report from cyber cafe(Web Enabled) that is generated with oracle 9i Discoverer. If YES then How ?
    If NO then Why
    OR
    any other version from which we can access the report from cyber cafe that created with discoverer

    Hi Felix,
    of course. this works. In the customer exit you can read in step 2 the variables from the input screen.
    function z_bw_e_zepcfiscyvvg.
    *"*"Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(I_VNAM) TYPE  RSZGLOBV-VNAM
    *"     VALUE(I_VARTYP) TYPE  RSZGLOBV-VARTYP
    *"     VALUE(I_IOBJNM) TYPE  RSZGLOBV-IOBJNM
    *"     VALUE(I_S_COB_PRO) TYPE  RSD_S_COB_PRO
    *"     VALUE(I_S_RKB1D) TYPE  RSR_S_RKB1D
    *"     VALUE(I_PERIV) TYPE  RRO01_S_RKB1F-PERIV
    *"     VALUE(I_T_VAR_RANGE) TYPE  RRS0_T_VAR_RANGE
    *"     VALUE(I_STEP) TYPE  I DEFAULT 0
    *"  EXPORTING
    *"     VALUE(E_T_RANGE) TYPE  RSR_T_RANGESID
    *"     VALUE(E_MEEHT) TYPE  RSZGLOBV-MEEHT
    *"     VALUE(E_MEFAC) TYPE  RSZGLOBV-MEFAC
    *"     VALUE(E_WAERS) TYPE  RSZGLOBV-WAERS
    *"     VALUE(E_WHFAC) TYPE  RSZGLOBV-WHFAC
    *"  CHANGING
    *"     VALUE(C_S_CUSTOMER) TYPE  RRO04_S_CUSTOMER OPTIONAL
      data: wa_e_t_range     type line of rsr_t_rangesid,
            wa_i_t_var_range type rrrangeexit.
      data: l_month(2) type n,
            l_year(4)  type n.
      case i_step.
        when '2'.
          read table i_t_var_range
               into  wa_i_t_var_range
               with key vnam = 'M_SEV_01'.
          l_month = wa_i_t_var_range-low+4(2).
          l_year  = wa_i_t_var_range-low+0(4).
          if l_month = '01' or l_month = '02'.
            l_year = l_year - 3.
          else.
            l_year = l_year - 2.
          endif.
          wa_e_t_range-low  = l_year.
          wa_e_t_range-opt  = 'EQ'.
          wa_e_t_range-sign = 'I'.
          append wa_e_t_range to e_t_range.
      endcase.
    endfunction.
    Variable 'M_SEV_01' is a input variable for calmonth. From this variable the coding extract the fiscal year.
    Sven

  • I was getting messages that my Aperture Library was full, so I updated to Aperture 5.3.1. When I open it, I'm asked to update my library. When I select that option, I'm told that my library is full. Now I can't access my library at all. What should I do t

    Hi all,
    I was getting messages that my Aperture Library was full, so made an appointment at my closest Mac store, but have to wait 2 days. They advise you to update saoftware before coming in, so I updated to Aperture 5.3.1. When I open it, I'm asked to update my library. When I select that option, I'm told that my library is full. Now I can't access my library at all. What should I do to access my library? Do I have to uninstall 5.3.1 and reinstall an older version?
    Another problem I have recently encountered ... all the up and down scrollers on various screens have disappeared. They reappear fleetingly when I use my up and down arrowa, but I can't always catch them. How do I get my scrollers back?

    Thank you so much for your patient guidance and screen captures.
    You are welcome.
    My external hard drive is properly formatted for Aperture, so I am currently copying my Aperture library to it. That will take hours since it is copying 101 GB.
    o.k.
    I understand that I need to clean some space on my internal hard drive and reformat the Aperture library to get back in operation.
    You need to upgrade the Aperture library to be used with Aperture 3.5.1.  That will happen automatically, when you first double click the copied lirary to open it in Aperture.
    I'll also need to back up my external drive with a new external drive if I make space on my internal drive by removing some photos from there and store them on my current external drive.
    What do you use for backup? If you are using TimeMachine it is better to have only the Time Machine backup on the Time Machine drive . In that case would I put the Aperture library and other data on a new drive and keep the old drive for backup.

  • Can't access photo library after last update

    I have a Macbook Air 13 and am running the most current Maverick (10.9.5) before Yosemite was released.
    I take all updates as they arrive and are listed by AppStore.
    After the last iPhoto update that came about the time Yosemite arrived I can no longer access my photo Library.
    When opening iPhoto it give me a choice to upgrade my library or quit. So I tried to upgrade and after about 30 seconds iPhoto simply goes away.
    I am traveling and can not do the large Yosemite upgrade, in case that is the issue, but need access to my photos.
    When I plug in and sync my iPhone5S  (which is running the latest updates as well) it seems to sync but I have no way to import the photos.
    I am guessing this is related to the last update but have no idea what to do in order to recover.
    iPhoto 9.6 now show incompatible but I don't recall seeing this earlier.
    I am running iTunes 12.0.1 and it can not access the photo settings. It just sits with the busy spinner.

    iPhoto 9.6 only runs on Yosemite.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • After upgrading to 11.0.5.5 can't access iTunes store. Temprorarily unavailable all the time.

    After upgrading to 11.0.5.5 can't access iTunes store. Temprorarily unavailable all the time. Nothing helps, tried to flash the DNS. Nothing.....

    Same issue.  I emailed apple and they had me call apple.  Not really any help.  Did all the troubleshooting listed and to have further help diagnosing problems it isn't free.  I explained to the rep that I have seen others having same issues - he didn't know anything about.  This is first time I have had problems.  I can't even purchase song on my PC but can on my iphone.  I just would like to be able to access my account.  Afraid to sign out of itunes in case I can't even get to my library etc. 

  • How can I access my iPhoto library folder?

    My hard drive recently had to be replaced, and when they replaced it, they updated to OSx 10.9. I had not backed up my photos before my hard drive crashed, but they backed up all my files for me. I went to open my iphoto library from the backup files and as a new (to me) version of iphoto 11 opened, I got a message saying that it had to update the photos in my library in order for them to be compatible with this version of iPhoto and that after updating them, I'd no longer be able to read them on an older version of iphoto. I clicked ok. It only imported 9 photos (out of several thousand). I went to finder and tried to open the iphoto library folder (which contains the library file and the cache, etc.), but the folder will not open. Instead, when I click to open the library folder, it brings up iphoto, as though to indicate that my library is there. Did I somehow unknowingly overwrite my library or something?? Any ideas why I can't access my iphoto library? Are my photos gone?
    I'm stupid so I don't have copies of the photos anywhere else. I don't have Time Machine or anything. Did I irreversibly screw up??

    I didn't think to check what photos were there or what the library size was before trying to import at first. How do I restore my backup of the iphoto library? (sorry if that's a stupid question). I checked in the Masters folder and only saw a few of my photos (the same ones that were imported to iphoto).
    I definitely know it was a mistake not to have a backup of the photos. It'll be the first thing I do if I can get them back. The mistake I was referring to in my initial post was clicking "ok" when it asked to update---but from what you're saying it sounds like that wouldn't have deleted anything.
    I'm thinking maybe the backup is not complete (even though I asked the tech people 5 times if it was!), because I checked the imovie events folder, and it's also empty (and it definitely shouldn't be)! If this turns out to be the case, I may have to go back to the repair place to see if they can still pull files off.

Maybe you are looking for