"CAS Console must be accessed through Workbench" problem

Hi, the data sources tab is not able to connect to the cas server and giving off this message : CAS Console must be accessed through Workbench
I have encountered this before and bookmarked the the solution page that was from eden but now that it is down I can't get to it. Can anybody remember the solution? thanks!

This can occur if CAS is reinstalled. Check your ws-extensions.xml and casconsole.properties files, and ensure that they agree on the same shared-secret.
Best
Brett

Similar Messages

Not able to access CAS service through Endeca workbench: getting an error "CAS Console must be accessed through Workbench"

Getting an error while accessing the Datasource tab through Endeca workbench "CAS Console must be accessed through Workbench". Verified both ws-extensions.xml and casconsole.properties files which exists under %ENDECA_TOOLS_CONF%/conf, both files shares the same sharedSecret. Do anybody knows how to resolve this issue.
I did tried to reinstall CAS component multiple time , all the time the same error throwing.
Endeca CAS service is also not able to start through microsoft console (services.msc) throwing an error " Windows could not start the Endeca CAS Service service on Local Computer"

This can occur if CAS is reinstalled. Check your ws-extensions.xml and casconsole.properties files, and ensure that they agree on the same shared-secret.
Best
Brett

CAS console not showing up in Workbench

I installed Endeca commerce 3.1.2 components - mdex, platform services, tools and frameworks and cas on my windows machine. I did select CAS Console Workbench extension option during CAS installation. I then deployed Discover app using CAS and the app seems to be working just fine. But the CAS console is not showing up in workbench. It (CAS) works fine from command prompt. I tried uninstalling and reinstalling all the components but still the same result. Any idea what I could be missing or doing wrong? Thanks in advance!

If you have also installed the current iTunes version, download the current install and re-install it over the existing - no need to remove iTunes first.

Can TLD jar can access through EAR / APP-INF/lib folder

Hi All,
If I have a TLD files into jar file and their specific classes are also into jar file .
Now can access those jar through EAR file APP-INF/lib folder or else its must to access through WEB-INF/lib folder.
any pointer will be great.
Regards,
Kal.

I suggest you assume that's how it's supposed to work, and get that to work most efficiently. I have no idea what you were trying to achieve by putting the taglib jar in APP-INF/lib. Perhaps you have multiple webapps and you wanted to avoid multiple instances of the taglib jar? If that's the case, I believe you could use WebLogic "shared application libraries" (I don't think that's the correct term), where you deploy a jar file as an application library, and the weblogic.xml file in each webapp that uses it would specify the name of the application library it uses.

Internet Access through TMG for all HO & Branch office

Dear Experts!,
I am new to the Forefront TMG 2010. Have requirement to implement internet access.
Head office : 192.168.11.x/24 (192.168.11.1 is the TMG server)
Branch Office 1: 192.168.12.x/24
Branch Office 2 : 192.168.14.x/24
Branch Office 2 : 192.168.16.x/24
Forefront TMG 2010 standard edition.
Having 3 NIC's two have different ISP network addresses and one has 192.168.11.1.
Branch office are connected using MPLS network, the requirement is all branch site internet must be accessed through TMG 2010 server which is homed in Head Office. How to achieve ?
What needs to be done in external firewall and in TMG for enabling internet access.
Thanks!
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Hi Ganesh,
Hope this helps
1 - If you wish to give internet as Proxy to users.
Ensure the Below subnet is able to reach TMG Internal Interface that is 192.168.11.1
Subnet
Branch Office 1: 192.168.12.x/24
Branch Office 2 : 192.168.14.x/24
Branch Office 2 : 192.168.16.x/24
Configuration
Enable Proxy in TMG and configure Proper Ports as per your requirements
On the Client IE – Ensure you put Proxy IP as TMG and Port configured in TMG configuration.
Enable a Rule
Access Rule
Source : Internal
Destination : External
Ports : HTTP / HTTPS
Users : Authenticated Users
2 As normal Internet as Gateway to users
You need to request your MPLS provider to change the Default Route of below subnet to 192.168.11.1. By doing this, all the internet request from the below subnet to internet will hit TMG.
Subnet
Branch Office 1: 192.168.12.x/24 Default Route 192.168.11.1
Branch Office 2 : 192.168.14.x/24 Default Route 192.168.11.1
Branch Office 2 : 192.168.16.x/24 Default Route 192.168.11.1
IF you have any L3 Switch then you can also make Default gateway as L3 for all the subnet and from L3 device point it to TMG
Enable a Rule
Access Rule
Source : Internal
Destination : External
Ports : HTTP / HTTPS
Users : All Users ( Important )
Two ISP
In network Rules : You need to use NAT
You will have a Rule which NATS internal to External
On external - Choose which ISP interface should be used and Apply NAT rule

Console access through USB- Solaris x86

Hi,
I installed Solaris 9 on my laptop, Compaq Presario V2000 Series. My laptop does not have a Serial Port attached. I was wondering whether I can access the console through USB . And if so, can you please also provide me the instructions on how to configure it.
soladmin2006

Hello.
/dev/dsk/c7t0d0s0The "s" tells me that you use a Sparc system - right?
/dev/dsk/c7t0d0s0
"s0" is the primary partition on Sparc formatted disks.
The whole disk is identified by "s2" on Sparc systems.
If the floppy disk does not have a partition table (this is the case for removable media such as 3.5" disks) you should use
/dev/dsk/c7t0d0s2
For non-removable or integrated media (such as "USB sticks") XP often adds a partition table. In this case you must add ":c" to the partition name:
/dev/dsk/c7t0d0s2:c
Martin

My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it. I have changed my password through Security and my Accounts numerous times to no avail. Is there anythin

My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

Guest LDOM disk access through multiple IO domains

Hi All,
I am working on a configuration, wherein the boot disk to the Guest LDOM is being provided through an image file hosted on a VxVM diskgroup (vmdg1). The configuration has another copy of the same image file being provided through another VxVM diskgroup (vmdg2)l through another virtual disk service.
let me clear the configuration a little more in detail
A T-5240 server having 2 IO domains configured
Primary (Control domain + IO domain + Service domain) configuration
A VxVM diskgrop (vmdg1) having a boot image file
Secondary (IO domain + Service domain) configuration
A VxVM diskgroup (vmdg2) having a copy of the boot image file
these devices are exported through their respective virtual disk services with the same mpgroup name to a guest LDOM. The vdsisk is then assigned to the guest ldom which is using the volume through the primary service.
When the guest LDOM is started it starts with the disk export through the Primary domain. All writes happen fine. When the VxVM diskgroup is deported from the Primary the Guest LDOM still remains online as starts using the disk image path through the secondary domain.
I then bring the VxVM diskgroup and the mounts back online on the Primary domain and deport the diskgroup from the secondary domain to see if it failsback to the image through the Primary domain. The Guest LDOM now is in a hung state and does not allow access through the local console or through network logins.
Has anyone see such a problem? Also is it recommended to use disk based image as a backend device in mpgroups through "ldm add-vdsdev" ?
TIA,
Sudhir

As far as I know then only way to "re-balance" the I/O across the domains is to unbind/bind the guests. Not a great answer, but this could be done as part of the guests patching cycle.
I think there is an RFE to provide MPxIO-like features to guests.

Samba server cannot be accessed through Finder's 'Network'

Hi,
First off, I'm not sure that this is the right forum for me to post this topic, but all the Samba related questions seemed to be coming from here. I don't own a computer with Windows, so I'm not interested in Windows compatibility per se, but I am interested in having my Mac Powerbook connect with a Linux Server (using Samba).
So I think Samba is working fine. I believe this to be the case because I can run:
smbclient -L morbo
from my Mac and get a list of shares (the linuxbox is called morbo).
I can also access a share using:
smbclient //morbo/nanoo
and I can see the files in the /home/nanoo directory of the linuxbox.
So far so good. However my reason for setting up Samba was to be able to find shares in the 'Network' section of my Finder. I use the commandline a lot on the linuxbox, but on the Mac I prefer not to open a terminal if I don't have to. Here is the where the problem occurs. Morbo will show up in the Network section (although this takes quite some time), however trying to connect to it inevitably crashes my finder. I have tried this several times and each time Finder crashed and had to be relaunched.
Any idea what could be wrong here? It would seem to be that Samba can't be to blame seeing as the shares can be accessed through smbclient - is it a configuration problem on the Mac?
Many thanks in advance,
nanoo

I'm having the same issues. Which Linux/Samba versions are you running? (Ubuntu 6.04/Samba 3.0.14a here), apparently a bad combo!
Here's the results of the "hang" from my server's Samba log:
[2006/03/21 01:02:24, 0] rpcparse/parse_prs.c:prs_memget(537)
prsmemget: reading data of size 2 would overrun buffer.
[2006/03/21 01:02:24, 0] rpcserver/srv_pipe.c:api_pipe_bindreq(919)
apipipe_bindreq: unable to unmarshall RPCHDRRB struct.
This seems like the most likely candidate:
http://www.stillhq.com/samba/000002.commentform.html
Bugfix information from Samba:
https://bugzilla.samba.org/show_bug.cgi?id=2973
So, if you're not running Samba 3.0.20, give that a shot.
Colin
12 iBook 1.33 G4 Mac OS X (10.4.2)

Remote panel and selective control access through Security with DSC

Hi Everyone,
I looked around to see what labview had to offer concerning security of remote panel and all the solutions I've found only propose full access to a remote panel, or none. The login page is not an option for me as everyone on the intranet can access the remote panel for monitoring but not everyone can have control to the buttons on it.
With the DSC module, I can give securities to the different controls and it works great with the exe, if I log in or out, the controls appears or disapears. Unfortunately, with remote panels, those controls are always visibles. Furthermore, when I log in from a remote panel, all the other remote panels get logged in with the same username and priviledges. When I log out, same thing, it logs out all the other remote panels. So the last guy who logs in gives its priviledges to every one else who is monitoring the remote panel at that time. when he logs out, he logs everyone out. I used a reentrant vi hoping that this would solve the problem but it didnt.
I would like to do what my colleague does with Advantech without any problem. He has only 1 .exe is running on the server and whoever connects to it through webserver, just needs to log in and he has all the priviledges of an guest, operator, admin, etc.. with access to controls and features accordingly. All this without interfering with the other people using the remote panels. This colleague has always been doubtful about the capabilities of labview to do SCADA systems and uptil now, I've been able to prove him wrong.. please help me continue
There are workarounds, using remote desktop to the server instead of webserver but it definitely is not as practical for the client and it will need quite some work to to synchronise all the exes open from the differents sessions, through the use of shared variables, binding and securities.
Thank you for your help.
Solved!
Go to Solution.

Thank you very much for your reply Jordan.
The NI security info is on the server (local domain with groups and users), and the running exes as well. The remote panel is not supposed to be accessed by internet, at least not yet, but just by the computers on the network and thinkline computers who are directly connected to the servers. the remote panel is accessed through the simple url: http://serverip/Application.html
There is no problem with accessing the remote panel of the exes on the server from another computer on the network. But there are several security issues when logging in and out with the NI Security Programmatic Login and logout VIs through the remote panel..
The 1st problem occurs when several people access the remote panel at the same time. In my setup, everyone is allowed to check what's happening on the front panel of the running exe, go through the tabs, check the graphs, the tables, etc.. , but only the administrators and the operators can send commands to the machines and the production line through this remote panel. Hence some buttons are accessible to all users, while others are only accessible depending on the privileges of the person logged in.
So like I said in the 1st post, I configured some buttons to be accessible only by the users of the admin group. When the exe runs, it's perfect, if I log in and out with an admin account, the buttons appears and disappear accordingly. But when I check the remote panel, those admin buttons are always visible, even if I am logged in as a guest or even logged out. Is it because the remote panel only needs minimum runtime engine and doesnt use the dsc runtime engine? if so, any work around?
Furthermore, another big problem is that if I login as an admin in one remote panel, then login as an guest in another remote panel, and then logout back from the first remote panel, it says: "User Domain/Guest logged out". Hence, my second login logged out my first user. I can actually see the admin buttons appearing and disappearing on the exe when login as admin and guest from the different remote panels.
So that's it, I would like my remote panel to behave like a normal scada system, with one exe running in the back (on the server) and with all the users accessing it through web server. Several users might/will access the remote panel at the same time and each of the users have a login/password that grant some of them the privileges to take some actions while giving the others only monitoring rights.
I hope that I have been more clear in this 2nd post,
Thank you again for your time.
Best Regards,
Tom.

Printing from websites accessed through Firefox is unitelligible - just symbols, whereas fine with Safari.

For the last week or so, whenever I try to print from a website accessed by Firefox (either to pdf or printer) the resulting pages(s) are completely unitellibible -- they look like a kind of code. I have McAfee- SitAdvisor is disabeled and Firefox has full access through the Firewall. My Windows FIrewall is turned off.
When I use Safari for the same operations, everything prints fine.
Please advise.
Thanks

I also have this problem. I believe it is caused by being connected through a proxy which is adding a second compression to the data. (I think IF uses gzip compression already).
Added details:
* Opera also works.
* I can view the IF admin section on FF
* I can view the forum if I go through a web proxy.

ADF app hangs when accessing through browser

Hello ADF/Weblogic friends,
When I try to access the ADF app, it says loading... for ever, which was deployed successfully in WebLogic. I do not see any visible errors in the log. Verified the DB connection which was deployed is working. Also created the datasource for the same db/jndi name in the server level.
The same app works through JDeveloper(11.1.1.4.0)
Configuration details are "WebLogic Server Version: 10.3.4.0", "Oracle Enterprise Manager - Fusion Middleware Control 11.1.1.3.0".
Would be helpful if somebody sheds light on this issue.
thanks

Thank you for your reply... sorry for not replying earlier... i had given up hopes : )
You are right about psadmin binary not being in psconsole.war.. maybe since it is portal server 6, it is some other executable.
When i asked the person who had given me the setup about psconsole not being available, he said that psconsole was working on his machine. He is not a technical guy and had not installed SJS 6 by himself. So he could not help me with this problem. It could be that the the psconsole.war file was missing from the installation.
I searched for the war files in both the installed directory as well as in the setup files and could not find it. : (
Anyway, i un-installed SJS 6 2004Q2 using the setup.exe (in windows) and while uninstalling it showed a window saying "psonsole was not found while accessing through the browser. Retry| Ignore| Exit". Also, the un-installation successfully removed all the services required for starting components like directory server, web server, calender server, (cacao also), etc...
I've downloaded Portal server 7.2. Let's see how that turns out... Thanks anyways...

At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none lightening fitting that I want.

At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none lightening fitting that I want.

I wonder if this comment on the Amazon site is the answer to my problems?
PLEASE NOTE: In order to provide the same power output as an original 3 ft Apple USB cable, the housing of our 6.5 ft cables need to be a bit larger. Due to the larger head size, it will not be compatible with some cases that have a smaller charger opening
If that is the case then I am stuck with the Griffin one or just use the original.
Thanks for your observations guys

No access through hostname

Hi,
if I want to access to my webserver (on my lion server), I just have access throug the servers ip-address.
But I have no access through my hostname.
These problem exists just if I want to use the webserver from another computer or iPhone in my network.
thanks

Your server has a hostname e.g. "myappleserver.local" or "myappleserver.john.local"....
In your network you can acces your server through this hostname.
So if you configure iCal on your iPhone (create account - CardDav-account) you can set the server with the server's ip or the server's hostname (e.g myappleserver.local).
With the hostname you can also access the webserver (try it - open safari and write your hostname in the url-task, but don't forget to turn the webserver on).
If you work with more routers or want to access from internet, don't forget portforwarding (http://en.wikipedia.org/wiki/Port_forwarding)

OBIEE Access through Smart View

I am trying to setup OBIEE Access through Smart View . I have done the
following:
Private Connection:
From Smart View ribbon, click Panel.
Select
Private Connection.
Press the right arrow and Create New Connection.
Select Oracle BI EE.
In my case http://adc-obi0200-gse.oracledemos.com:9704/analytics/jbips
I get the message unable to connect to provider.
Any ideas what the issue may be?

The supported Smart View release compatible with OBIEE 11.1.1.7.0 is 11.1.2.5.000, 11.1.2.3.000, though I would recommend you use 11.1.2.5.000
For more information you can check Doc ID 1923582.1
Thanks

"CAS Console must be accessed through Workbench" problem

Similar Messages

Maybe you are looking for