Catalog contents missing in quality (SRM 5.0)

Unfortunatel we are unable to see the entire set of catalogs in the Quality environment,However we could see them in the production.
Please suggest what is the database for contract catalogs/Product catalogs in SRM 5.O

catalog items are not seen when being acess from EBP while shopping.

Similar Messages

Catalog content missing after upgrade to 11.1.1.6.6

We recently applied the patches to upgrade OBIEE from 11.1.1.6.0 to 11.1.1.6.6. But after the upgrade, all of the catalog contents went missing. I can still see My Folders and Shared Folders, but nothing under them. I still have all of the subject area and can still build custom analysis, but all of the pre-built contents are gone. We are using BI Applications 7.9.6.3.
Has anyone else had the same issue?
Thanks,
Yi
Edited by: yitang on Nov 29, 2012 8:19 PM

Hi,
Yesterday we have encountered the same problem. We have migrated our Development environment from 11.1.1.3 to 11.1.1.6.5 and the folders do not show any of the existing reports and dashboards. When we click on the My folder or Shared Folder, we encountered a BI spinning a wheel and nothing loaded. We later found out that during our test upgrade of our staging environment, one of the report failed and the work around was to add the following to the NQSConfig.INI.
EVALUATE_SUPPORT_LEVEL = 2;
Even though this is nothing to do with Catalog not loading, we went ahead with this change and restarted the BI components.
We refreshed the page by clicking F5 and the catalog now successfully loaded.
Again, I am not sure whether this was related to above change or just refreshing the page with F5.
Can you try what we did and see whether you could see the catalog contents.
Thanks
Sundar

SRM - Catalog Content Management

Hi SRM Masters
Can any one could send me the config documentaion for SRM Catalog Content Management document and functionality(other than SRM260 and SRM270 both I have).
and also SUS config documents and functionality.
Regards
Rajesh

Hi,
Check these links....
http://www.sap.com/usa/solutions/businesssuite/srm/pdf/BWP_SID_Catalog_Content_Mgmt.pdf
http://www.jhu.edu/hopkinsone/documents/SRMCatalogandContentManager_000.pdf
Reward points if useful....
Regards
AK

Catalog Content

Hello,
I m working on SRM-MDM scenario.
I m sending CatalogUpdateNotification_Out using BBP_CCM_TRANSFER transaction from SRM
But in the xml file which i receive in XI, Catalog Content data is missing.
I dont know anything in SRM.
Plz help.
Thanks,
Maheshwari

Hi,
I could able to send file with catalog content data.
But in that file CatalogTypeCode is 04
Now i want some files with CatalogTypeCode is 03.
How can i do this??
Thanks,
Maheshwari

How can I tell which catalog a missing image belongs to?

How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
Any Ideas?

So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
accordingly, having these mutiple catalogs is now getting in your way
using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance issue is not the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
RP

Viewing Catalog Contents

Hi All,
Has anyone any ideas on how we can allow Cart/PO approvers (who are not able to shop) access to view the SRM Internal Catalog content when they do not have access to the shop transaction?
We have just gone live with SAP version 5.5 and are not using MDM.
Any suggestions would be welcome, but please don't ask why they want to do this as they just do
Thanks in advance
Allen Brooks
BPO
SAP CCC Team
Sunderland City Council.

Hi,
Check up with your SAP BASIS(or) SAP Authorisation Team whether it is possible to control the same through separate ROLES assigned to the user.
Normally for the person who is creating Shopping cart only will have the access .
G.Ganesh Kumar

Folders in my catalog are missing!

Folders in my Lightroom 5 catalog are missing even though they are still in the folder structure and visible in Finder. There are no ? on folders in my catalog. They just aren't there anymore! If I do a Find Missing Photos it comes up with over 8000 pictures. Help! What happened and how do I get these back? And I'm afraid I've lost all the edits to this 8000+ pictures too. Is that right?

If the photos are still in the catalog (and I know they are because the catalog reports 8000 missing photos), then you haven't lost your edits.
You need to reconnect the photos or folders to the catalog via: Adobe Lightroom - Find moved or missing files and folders
I am going to guess that while the folders seem to be not present, if you scroll up and down in the Folder Panel in Lightroom, you will find other folders that have a ? mark, it is these folders you need to reconnect. Otherwise, if my guess is wrong, then you would have to reconnect the photos.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!

Question on CCM catalog content approval

Hi,
Can somebody tell me what kind of update to catalog content needs approval? My understanding was that if there is a price change, definately it will need to be approved. But yesterday my catalog manager uploaded some change to his catalog item price, and when checking the items in my procurement catalog, we can see the price has changed, but the status is still 'approved'.
Is my understanding wrong? How can I define what kind of update requires approval?
Thanks and Regards,
Elly

Hi Elly,
Firstly - can you check in customizing if the catalog is maintained with the status 'Approved'.
i.e. SPRO -> Cross App Components -> SAP CCM -> SAP Catalog Authoring Tool -> Specify default value for catalog status.
Here the catalog will either be set to Approved or To be approved initially.
After this, you can define approvals on characteristic level, drill into a characteristic component and you can set a percentage or absolute deviation which will based on these rules set items with this characteristic either to be approved or approved.
Alternatively you can make use of the CCM Approval Badi, You can use this BAdI to change the approval status of your catalog entries (items).
Normally, the approval status of catalog entries is determined by approval rules, which are stored for a characteristic. You can use this BAdI to get the status information of the catalog entries after the rules have been processed, and to change this status information as appropriate.
Regards,
Jason

Managing Catalog Content

What is Managing Catalog Content?
Can anybody please explain about this in detail
Regards
NK

Hi
This is one of the process in Catalog contenet manageemnt like upload,manage and publish and preapre the master data in ccm.
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
BR
Muthu

How to upload Master Catalog Schema in Catalog Content Management SRM

Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
Can all of you guide us what to do:
1. How to delete a existing Master catalog (can de-publish will do it?)?
2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
3. After uploading the master schema how we can check that master catalog is working fine.
The answers will be rewarded with valuable points
Regards
Praveen K Ghosh

Sridhar,
I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
Any help provided will be really appreciated.
Thanks in advance
Carlos

Missing catalog content

hi all,
after i ran the report bbp_ccm_transfer_catalog, i checked the payload in sxmb_moni. There was no catalogmodel and catalogcontent

Hi,
Select the Force Initial Transport checkbox when you are transfering for the first time. Also define the backend system in SRM with the name CATALOG. It would be a dummy entry no configurations are required.
Regards,
Jitesh Talreja

Error in transferring data from Catalog , in Managing business partners,SRM

When I post data of Suppliers from ROS , and then check the Manage business partners in mySAP SRM ( ITS) pages , it pops a message " Data cant be transeferred from Catalog".
Can anyone please explain ,,how to overcome this problem,,,
Is it a config problem or some problem in Codes ?
Its giving error for the Standard SAP ROS page also.
Gautam

Hi
Seems like some BASIS issue related to Roles/ Profiles / Authorization object missing for the log on user. Try giving SAP_ALL and SAP_NEW profiles to the user and see whether the same error happens or not.
Also ensure, number range configuation settings in SPRO are correctly maintained.
The Preselect Vendors transaction is delivered with the single roles. In order to use the transaction, you must enter the URL for supplier screening in the single role. Then you must update and activate the composite role.
Supplier Screening with ERP You have logged onto the supplier registration system with the role SAP_EC_SUS_ROS_ PROCESSOR.
Refer to these links for details.
http://help.sap.com/saphelp_srm50/helpdata/en/77/a498403de08368e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b8/92303fdcf66d37e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
Regards
- Atul

Online update of catalog content in CCM by Suplier?

Dear Experts,
How does online update/upload of content by Supplier happens in CCM catalog in SRM? Does it go through the approval by content manager during the upload process?
Is it supported in SRM MDM catalog as well?
Thanks and regards,
Ranjan

In the CCM you can set the default status of the catalog items to the To be approved and once you recieve the file from supplier Content manager can upload and the content approver can approve those items.
In MDM you have multiple options to handle the content either by a)excel upload or b)defining the ports and respective map and placing the file in the port for auto upload with MDIS.
Regards,
Surya

LR Catalog content disappear... then eventually reappear

I'm on LR 5.7. This may have started once I upgraded to 5.7, or maybe just before. I've been on LR for a couple years now and have never had this issue until just recently, just the last few weeks. What will happen is that LR will crash. When I re-open LR, the catalogs are there, but the content is completely gone, except the last project I was working on. The first time it happened, the content reappeared after a few days, then disappeared again after that one appearance. It reappeared a few days later and stayed with me for 3 or 4 days, then LR crashed and it disappeared again. I haven't gotten it back up yet.
Why is this happening, and how can I stop it? This was happening before I switched to OS X Yosemite (10.10.1) then I was on Mac OS X 10.7.5.
Any help would be appreciated. This is killing my workflow.
Thanks,
Ron

Okay. I have two catalogs going right now. One that I created once I started having this problem as I needed to continue to work on images/projects, and the one with most of my work on it.
Here's the one with the missing folders:
Here's the other catalog where I continue to work on pictures.

Catalog contents missing in quality (SRM 5.0)

Similar Messages

Maybe you are looking for