Missing catalog content

hi all,
after i ran the report bbp_ccm_transfer_catalog, i checked the payload in sxmb_moni. There was no catalogmodel and catalogcontent

Hi,
Select the Force Initial Transport checkbox when you are transfering for the first time. Also define the backend system in SRM with the name CATALOG. It would be a dummy entry no configurations are required.
Regards,
Jitesh Talreja

Similar Messages

Catalog content missing after upgrade to 11.1.1.6.6

We recently applied the patches to upgrade OBIEE from 11.1.1.6.0 to 11.1.1.6.6. But after the upgrade, all of the catalog contents went missing. I can still see My Folders and Shared Folders, but nothing under them. I still have all of the subject area and can still build custom analysis, but all of the pre-built contents are gone. We are using BI Applications 7.9.6.3.
Has anyone else had the same issue?
Thanks,
Yi
Edited by: yitang on Nov 29, 2012 8:19 PM

Hi,
Yesterday we have encountered the same problem. We have migrated our Development environment from 11.1.1.3 to 11.1.1.6.5 and the folders do not show any of the existing reports and dashboards. When we click on the My folder or Shared Folder, we encountered a BI spinning a wheel and nothing loaded. We later found out that during our test upgrade of our staging environment, one of the report failed and the work around was to add the following to the NQSConfig.INI.
EVALUATE_SUPPORT_LEVEL = 2;
Even though this is nothing to do with Catalog not loading, we went ahead with this change and restarted the BI components.
We refreshed the page by clicking F5 and the catalog now successfully loaded.
Again, I am not sure whether this was related to above change or just refreshing the page with F5.
Can you try what we did and see whether you could see the catalog contents.
Thanks
Sundar

Catalog Content

Hello,
I m working on SRM-MDM scenario.
I m sending CatalogUpdateNotification_Out using BBP_CCM_TRANSFER transaction from SRM
But in the xml file which i receive in XI, Catalog Content data is missing.
I dont know anything in SRM.
Plz help.
Thanks,
Maheshwari

Hi,
I could able to send file with catalog content data.
But in that file CatalogTypeCode is 04
Now i want some files with CatalogTypeCode is 03.
How can i do this??
Thanks,
Maheshwari

Missing BI content datasources

Hi all. I have an issue... I'm trying to activate some BI content datasources, but there are missing a lot of them. Do somebody knows why?
Here are my system status:
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
BI_CONT 703 0009 SAPKIBIIP9 Business Intelligence Content
Note: It only happens in my BW DEV system. In BW QAS (same installation) there are all the missing datasources.

There have not many BI content datasources in BI.
If you are considering ERP data source, you should check RSA6 in ERP/QAS and Compare it with RSA6 in ERP/DEV.
Transport all datasources in interests from ERP/DEV to ERP/QAS and replicated them to BI/QAS at once, and you will find the missing BI Content data sources.
hope it can help.
regards,
K

SRM - Catalog Content Management

Hi SRM Masters
Can any one could send me the config documentaion for SRM Catalog Content Management document and functionality(other than SRM260 and SRM270 both I have).
and also SUS config documents and functionality.
Regards
Rajesh

Hi,
Check these links....
http://www.sap.com/usa/solutions/businesssuite/srm/pdf/BWP_SID_Catalog_Content_Mgmt.pdf
http://www.jhu.edu/hopkinsone/documents/SRMCatalogandContentManager_000.pdf
Reward points if useful....
Regards
AK

SP23 missing BI content when processing EWA data

Hello,
In a recently upgraded solman system i am trying to process downloaded EWA data. For this a batch job SM:EXEC SERVICES is scheduled.
This job cancels however with message InfoCube 0SMD_PE2D is not available in version A.
When I search for this infocube in RSA1 i do not find it, so it seems I am missing some content.
Is this true? Or am i doing something wrong here?. Do I need to activate some ehp1 funtionality for this?
Thanks for any help
Tom

>
Tom van Rooyen wrote:
> One error at least was that in SOLMAN_SETUP the BI activation failed because the myself source system was not present at the time. Still the job went technically OK, which is not good practise
Tom,
Could you please open a separate thread in SDN or open a customer message on SV-SMG-INS to discuss the expected behavior within SOLMAN_SETUP.
I would also appreciate to avoid running into issues during EWA processing. Detection should have been possible earlier for users.
Thanks,
Ruediger

Question on CCM catalog content approval

Hi,
Can somebody tell me what kind of update to catalog content needs approval? My understanding was that if there is a price change, definately it will need to be approved. But yesterday my catalog manager uploaded some change to his catalog item price, and when checking the items in my procurement catalog, we can see the price has changed, but the status is still 'approved'.
Is my understanding wrong? How can I define what kind of update requires approval?
Thanks and Regards,
Elly

Hi Elly,
Firstly - can you check in customizing if the catalog is maintained with the status 'Approved'.
i.e. SPRO -> Cross App Components -> SAP CCM -> SAP Catalog Authoring Tool -> Specify default value for catalog status.
Here the catalog will either be set to Approved or To be approved initially.
After this, you can define approvals on characteristic level, drill into a characteristic component and you can set a percentage or absolute deviation which will based on these rules set items with this characteristic either to be approved or approved.
Alternatively you can make use of the CCM Approval Badi, You can use this BAdI to change the approval status of your catalog entries (items).
Normally, the approval status of catalog entries is determined by approval rules, which are stored for a characteristic. You can use this BAdI to get the status information of the catalog entries after the rules have been processed, and to change this status information as appropriate.
Regards,
Jason

Managing Catalog Content

What is Managing Catalog Content?
Can anybody please explain about this in detail
Regards
NK

Hi
This is one of the process in Catalog contenet manageemnt like upload,manage and publish and preapre the master data in ccm.
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
BR
Muthu

Viewing Catalog Contents

Hi All,
Has anyone any ideas on how we can allow Cart/PO approvers (who are not able to shop) access to view the SRM Internal Catalog content when they do not have access to the shop transaction?
We have just gone live with SAP version 5.5 and are not using MDM.
Any suggestions would be welcome, but please don't ask why they want to do this as they just do
Thanks in advance
Allen Brooks
BPO
SAP CCC Team
Sunderland City Council.

Hi,
Check up with your SAP BASIS(or) SAP Authorisation Team whether it is possible to control the same through separate ROLES assigned to the user.
Normally for the person who is creating Shopping cart only will have the access .
G.Ganesh Kumar

Missing catalog: help me recover Organizer albums/content

When a drive was replaced April 2014 on a Win7 computer, the old Adobe Elements Organizer 12.0.0.0 catalog went missing.
The default new one has been in use since for new projects. It has been Optimized and Repaired, no change.
I'm trying to find the old catalog for use. Searched for *.TLY *.TLU *.BUC and catalog.*
C:\ProgramData\Adobe\Elements Organizer\Catalogs\CONVERTED ELEMENTS 9\catalog_1.pse12db is 312MB.
Double-click or right-click/Open of this file does nothing.
Help!
There is a .buc file from January 2014 on an external drive, but no .TLY or .TLU with it and "catalog restore" does not cope when browsed to it.
There is a .tly from March 2013 that is currently in the process of "restoring" to a new location, but that's missing more than a year of projects.
Any help will be appreciated.

Andaleeb,
Thanks for your reply. I had asked earlier if it’s possible to retrieve it from a backup of Elements 7 program files. I did not specifically do a backup of the catalog because at that time I didn’t know I had to in order to import it into the new Elements 11. I had planned to just install 11 & move over the catalog then remove E7 from my computer. Unfortunately things didn’t happen that way due to my computer having troubles. As was noted in an earlier thread.
Alisa

Catalog contents missing in quality (SRM 5.0)

Unfortunatel we are unable to see the entire set of catalogs in the Quality environment,However we could see them in the production.
Please suggest what is the database for contract catalogs/Product catalogs in SRM 5.O

catalog items are not seen when being acess from EBP while shopping.

LR Catalog content disappear... then eventually reappear

I'm on LR 5.7. This may have started once I upgraded to 5.7, or maybe just before. I've been on LR for a couple years now and have never had this issue until just recently, just the last few weeks. What will happen is that LR will crash. When I re-open LR, the catalogs are there, but the content is completely gone, except the last project I was working on. The first time it happened, the content reappeared after a few days, then disappeared again after that one appearance. It reappeared a few days later and stayed with me for 3 or 4 days, then LR crashed and it disappeared again. I haven't gotten it back up yet.
Why is this happening, and how can I stop it? This was happening before I switched to OS X Yosemite (10.10.1) then I was on Mac OS X 10.7.5.
Any help would be appreciated. This is killing my workflow.
Thanks,
Ron

Okay. I have two catalogs going right now. One that I created once I started having this problem as I needed to continue to work on images/projects, and the one with most of my work on it.
Here's the one with the missing folders:
Here's the other catalog where I continue to work on pictures.

Missing SAM_EAM_DTA content.

I am getting a filter error when trying to compile the xAPP Analytics Composite Application for Service and Asset Management Downtime Analysis.
I checked and we are missing the query and views on our BI 7.0 backend system.
We are on BI 7.0 SP10 and BI CONT 7.0.3 SP 2
Is this content available in a later release or only available on 3.5?
Thanks in advance.

Solved!
In Edit > Preferences > Presets, I had checked the "Save presets with catalog" box. Unchecking that box restored the content of the "Edit In" menu.
-- Sam

App store icon gone missing/Web Content Filter - Apple Configurator

I am using Apple Configurator to manage the iPads at my school. I changed the settings on my school's profile, within Apple Configurator, so that the App store was not available. The App store icon disappeared and all was good. I decided to change the settings back, to allow the App store, saved the settings and refreshed a group of iPads. The App store icon is still missing and it doesn't appear that my new settings have been applied. I quit Configurator and tried again, but no success. I am running Configurator 1.5 and the ipads are running iOS 7.1.
Also, I have unchecked the "Allow use of You Tube" button because I want You Tube disabled, but Configurator still allows the use of You Tube through Safari. Is there any way to disable the use of You Tube without using the ridiculous "Web Content Filter", that when activated, limits adult content (good), which seems to include a lot of valuable educational sites (bad)? To me the only other option available seems to be to tick "Specific Websites Only" and spend the next year typing in all the possible sites that might have educational merit, ergo, my use of the word 'ridiculous'. Is there something I am missing?

Locate it in the Apps folder and drag it to the dock.

Missing BI Content Objects

Hello,
I have a question concerning the activation of objects of BI Content (Release 703, Level12). When searching for a 3.x datasource (for example 0PM_OM_OPA_3) in the value help the datasource I want to activate is missing in our development BI system. In the productive system the BI content has the datasource as a possibility to activate. I activated and replicated the datasource in the system. Is there a technical step I have to activate for BI Content or maybe for meta data repository. Any help is appreciated!!!
Thanks a lot!
Aline

The BI Content Standard dont...but the objects you activated...yes you can reactivate the same object...you have a very strange problem....when you select in Datasources 3.X in BI content you dont see this datasource.....i think is a Basis problem.....i have exactly the same BI Content level than you and i can see it in my system....
Sometimes in new installations theres som BI Content problems like this....
Regards

Missing catalog content

Similar Messages

Maybe you are looking for