Catch all emails and multiply email adresses
How can you manage multiply email adresses by one user.
example:
ROBERT has two email adresses : [email protected] and [email protected]
these two adresses must be sent from OS X Server to the client 'Robert'.
And how can you set up 'catch all email' to one specific adres. We would like to deliver all the emails with a different name for the *@domein.com to one client of our OS X Server.
And is there a way to send one email to multiply users, example:
email: [email protected] must be sent to [email protected], [email protected], [email protected] and so on, and so on.
Does anybody knows how to set this up in the new OS X Server?????
We thought about that also, but we noticed that it is not working.
For example, i have the email adres [email protected] but i make the alias 'twitter' and 'info' in my client account.
So i send a test email from outside the office with our iPhone on the [email protected] account. to [email protected] but nothing is happening, even not with the [email protected] mail.
What i know where the aliasses for stand is when you login to the server, example.
Username = myfirstnamewithmysurname
the alias lets you make a short name to login quickly, so if you make the alias like 'firstname' you now can login to your client account with that alias, but it is not working for emails.
Similar Messages
-
How to setup a catch all email accounts on a domain?
I am currently hosting several different domains on our server. On one of the domains, we would like to set up a catch all email account. Right now we have [email protected], and [email protected], but would like emails sent to any other address ('anything'@domain.com) to be directed to the [email protected] Is there a way to set up a wild card email address entry for a specific user account?
Don't do this. Seriously.
Your wildcard account will get inundated with every dictionary-based spam directed at your domain.
Many spambots just try common names at every domain they can find - alex@, andrew@, joe@, john@, etc. sometimes generating tens of thousands of messages in the hope that one or two names match legitimate accounts.
If you setup a wildcard account, all these messages will be accepted and dumped into this mailbox. If you don't have a wildcard account the messages will be rejected with a 'no such user' error (or dropped silently, depending on your mail server setup).
If you really do want to do it, then you need to get under the hood and configure postfix manually (Server Admin won't do this for you). The specifics are covered in the Postfix virtual accounts documentation. -
Support for catch all email address
Does anyone know if mail server has support for catch all email address
I now do want to catch all email as it has become my lives work to report spam.
So I figured out an easier way to catch all email using simply the serveradmin command-line tool (this only takes email that would otherwise bounce):
sudo serveradmin settings mail:imap:lmtp_luser_relay_enabled = yes
sudo serveradmin settings mail:imap:lmtp_luser_relay = catchallusername
sudo postfix reload -
How can I get post of all email-adresses in the same postbox?
I use 5 IMAP-email-adresses.
I don´t want to look into serveral postboxes to find my mails. In my outlook is it possible with pop-adresses, but I use IMAP-adreses to sync my mails.
It is possible in my Samsung handy with android Samsung-email program, but I want the same in Windows-Thunderbird on my other computers.
Does anybody know a solution?
Best wishes
Grue2002Pop mail accounts can use a Global Inbox, but IMAP mail accounts cannot because they are remotely accessing server to see and synchronise folders.
However, there is the option to use 'Unified' folders.
'View' > 'Folders' > Unified
or
'Menu icon' > 'Folders' > Unified
This gives the impression of a Global Inbox.
It shows the Inbox containg all messages, plus the individual Inboxes for mail accounts as sub folders to Inbox, just in case you need to access separately. -
ACE Strange setup: catch-all rule and no normalization
Hi,
I have the following setup:
Internet
|
PC1 ACE Default Gateway
| | |
===================================
I need to fullfull 2 requirements for this one-armed setup:
1) Incoming requests from the Internet must have visibility on the client source-IP. This has been solved by configuring the default GW of the PC1 server pointing to ACE (and not to the Deafult GW) and by not configuring source-NAT (nat dynamic command on the relevant classes).
2) PC1 must also initiate traffic to the internet using PC1 source address (and not ACE source address). Therefore we configured a catch-all rule that is intercepting this traffic and sending it to the external world via the Default Gateway and also we disabled normalization.
It works, both point 1 and point 2. My questions are:
1) Have you ever seen such a design in place and it is a supported Cisco design? I.e. Use a catch-all rule to intercept traffic to send it to the default GW, all this configured in a one-armed design like we have.
2) Do you think it could create a traffic loop if the catch all rule would intercept other traffic passing via the ACE? In PROD we have different contexts all configured in the same VLANK0 and I guess we should check that any of this traffic is impacted?
Thanks a lot in advance,
Giulio.
ACE1/Microsoft# sh run
Generating configuration....
access-list ALL line 8 extended permit ip any any
rserver host PC1
ip address 160.213.122.100
inservice
rserver host Default_Gateway
ip address 160.213.122.9
inservice
serverfarm host TO_INTERNET
transparent
rserver Default_Gateway
inservice
serverfarm host macchine
rserver PC1
inservice
class-map match-all DEFAULT_VIP
2 match virtual-address 0.0.0.0 0.0.0.0 any
class-map match-any PC1
2 match virtual-address 160.213.122.36 tcp any
policy-map type management first-match remote-access
class class-default
permit
policy-map type loadbalance first-match GIULIO-l7slb
class class-default
serverfarm macchine
policy-map type loadbalance first-match INTERNET
class class-default
serverfarm TO_INTERNET
policy-map multi-match PC1_INTERNET_NAT_PMAP
policy-map multi-match POLICY
class PC1
loadbalance vip inservice
loadbalance policy GIULIO-l7slb
loadbalance vip icmp-reply active
class DEFAULT_VIP
loadbalance vip inservice
loadbalance policy INTERNET
loadbalance vip icmp-reply
interface vlan 503
ip address 160.213.122.50 255.255.255.0
no normalization
access-group input ALL
access-group output ALL
service-policy input POLICY
service-policy input remote-access
no shutdown
ip route 0.0.0.0 0.0.0.0 160.213.122.1Guilio,
I think a "black hole" configuration (match virtual-address 0.0.0.0 0.0.0.0 any) like this, may cause unexpected behavior sooner or later.
I consider an alternate solution would be either to change the design or perhaps apply a x-forward-for feature where you can inject the original source address no matter you apply NAT.
Please this link:
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00809c3041.shtml
GET /header.html HTTP/1.1
x-forward: 172.16.10.221
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, */*
Referer: http://www.cisco.com/
Accept-Language: en-us
Accept-Encoding: gzip, deflate
If-Modified-Since: Fri, 30 Nov 2007 16:59:08 GMT
If-None-Match: "0164b527233c81:767"
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Host: www.cisco.com
Connection: Keep-Alive
All these queries should be discussed with your Cisco SE or Cisco Partner anyway to have a better approach.
Jorge -
Does BC email support a catch all account?
Hi
Can I setup one email account to catch all emails to *@domain.com and if yes, how do I do it?Catch-alls are no longer be available with OpenSRS - they are not supported because they contribute to spam since they do not trigger bouncebacks for non-existent email addresses. Customers will need to setup aliases to catch email sent to common email addresses such as sales@, help@ et.
-
While not quite java related I have faith someone can answer a question or two for me. Given domainX.com, which is known to have email, [email protected]
is it possible to determine all of the email names in this domain???
Im aware of the fact that some ISPs make use of LDAP, through which email adresses can be looked up, but outside of ISP with known ldap, is there any way of doing just this, in a legitimate and legal way???
Im thinking that its just not possible, at least while staying within the right side of the law. Im hoping maybe someone can give me some feedback on this...
Thanks for the time and input,
J.PriscoOne of the reasons I will never allow finger to run on my linux boxes!!!! Naa I dont think this is going to work for me at all..... I was just kind of hoping there was a way to do this............. I have one idea which will help me to do what I want to do, but its far from listing all email adresses///
-
Mail 4.5 not retrieving catch-all mail from Pop Server.
I use email fowarding for a domain (hosted at Godaddy) to forward to my verizon email account. For example: [email protected], [email protected], and [email protected] are forwarded to [email protected] The Mail 4.5 client on my MacBook Pro (OSX 10.6.8) retrieves all this forwarded email correctly from the Verizon Pop3 server.
I also have one of the domain email aliases setup as a catch-all account. For example [email protected] is configured as the catch all. Mail addressed to [email protected] is also retrieved from the Pop3 server correctly.
But any mail directed to the catch-all account because the email address is invalid such as [email protected] is not retrieved by Mail 4.5 client.
The 'catch-all' email is being forwarded correctly to my Verizon Pop server. If I log in to Verizon Webmail I can see the forwarded 'catch-all' emails in the Webmail Inbox. Also if I use Outlook 2010 on my PC to retrieve my Pop mail, it correctly brings down the 'catch-all' email.
It certainly appears like something internal to Apple Mail is filtering the 'catch-all' email and not retrieving it from the Pop3 Server.
If you can understand what I'm trying to report - can you help me figure out what is wrong?I now do want to catch all email as it has become my lives work to report spam.
So I figured out an easier way to catch all email using simply the serveradmin command-line tool (this only takes email that would otherwise bounce):
sudo serveradmin settings mail:imap:lmtp_luser_relay_enabled = yes
sudo serveradmin settings mail:imap:lmtp_luser_relay = catchallusername
sudo postfix reload -
Hi
is there a way to catch all errors, I know you can do try and
catch fro your code
about how about errors that come from built in Flex component
I am trying to catch all errors and show it to the user in
better format
but most important, it seems flex will be frozen and you can
do anything if the error is not caught and the only way around it
to restart your browser
Please help
Thanks
KasemEverything I read suggests that this isn't possible in Flex.
It seems that uncaught exceptions are handled by the Flash player.
This link discusses the problem in Flex 1.5 and it notes the
problem is not fixed in Flex 2.
http://www.mail-archive.com/[email protected]/msg25874.html
I'm going to continue to look. I really can't imagine that
Adobe spent all that time reworking Flex and didn't address this
problem. -
Forwarders/Catch-all..
Hi Everyone,
I have looked around for answers to this and haven't found one that works. My question is two-fold, but both parts of it are related for my purposes.
1) When I add a user account in Workgroup Admin and set e-mail up to forward to another address, the mail WILL forward. Unfortunately, it also sends a message to the sender stating Error 550, there is no valid recipient (aka, no mailbox for that user). Isn't that the way it should be, though, considering it's a forwarding account? How can I get it not only to work but to work practically... without sending a message not delivered letter, even though the message WAS delivered?
2) I am hosting, at this time, five websites. The owner of one of the websites inquired about getting a catch-all email address ([email protected]) and having THAT email forward to two separate people. Now, obviously, my first question applies here as well as I need to know how to get forwarding to work properly. But also, aside from editing the postfix config file (which I have done, and it does not work), is there a way to add a catchall through the GUI? For instance, can I add "*@hisdomain.com" as a shortname for the info mailbox?
All of your help is much appreciated. Thus far, this forum has been very helpful to me and I very much appreciate everyone who has contributed.
PS - It may be relevant to tell you that I am running server version 10.5.0. I upgraded to 10.5.1 last week and experienced lots of problems (namely with DNS and email), and though 10.5.1 may not have had anything to do with it, I'm still a bit hesitant to update.
Message was edited by: dustinvbuSee that's what I don't understand. I have had so many problems with Leopard Server (Im on my 5th install, I think?), but through all of those installations, email addresses for my virtual users has worked flawlessly.
-
How can I hide "Taxonomy Catch All Column" without using PowerShell?
After having moved some files around, I find that my view and edit properties forms include the field "Taxonomy Catch All Column" and the field IDs which are just going to be confusing gobbledegook to my end users.
I can't seem to find a way to get rid of it. I can't delete it and I can't see where to hide it. Searches only seem to turn up PowerShell script solutions, and I can't use PowerShell.
It's SharePoint 2010 Server, I'm a site admin and I can use SharePoint Designer, but not powershell, no server access, no central admin access.
Can anyone help please?Hi,
For your issue, it seems to be related to use Content & Structure.
If you choose to move content that contains managed metadata columns (or presumably enterprise keywords), the Taxonomy Catch All column shows up after you use the "Content and structure" tool. It shows up as a column in the library and is visible
in "Edit Properties" on every document.
Why are you can’t use power shell? It is convenient to solve your problem with power shell.
Here is a similar post, you can use as a reference:
https://social.msdn.microsoft.com/Forums/en-US/896cea1d-dc40-47f1-80f4-7a01f2d23fd9/what-is-the-significance-of-taxonomy-catch-all-column-lookup-column
http://blogs.c5insight.com/Home/tabid/40/entryid/385/Why-Do-Hidden-Taxonomy-Catch-All-Columns-Become-Visible.aspx
Besides, here is an article, you can have a look at:
http://www.andrewconnell.com/sharepoint-2010-managed-metadata-in-depth-look-into-the-taxonomy-parts
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Catching all the exceptions at once
Can we catch all exception and throw it all at once?
Here's what i want to do..
Say i have a class in which i have around 4 sql statements
which i'm putting it in a try. I do not want to throw execptions one by one.
instead
try{
some statements
catch{
goto Error -->
catch{
goto Error -->
Error:
Show all the statements here..
I do not want to do this manually..is there already an exists9ing class or something that we need to implement. Please reply
Tahnks,
AnjanaJust catch Exception. its the motherclass of all exceptions.
put everything in one big try/catch. -
My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email format?
Change it to an email address.
-> https://appleid.apple.com/ -
MY APPLE ID EMAIL ACCOUNT WAS STOLEN BY SOMEONE, AND I NOW I CAN NOT FIX THAT. SO I OPEN A NEW GAMIL HOW CAN I CHANGE MY APPLE ID INTO A NEW EMAIL ADRESS? THANKS.
If you are going to change your AppleID login you will need to log out and back in on all your devices. Turn off 'Find My iPhone/iMac/iPod' first or you will find yourself unable to sign out and be stuck.
-
I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?
Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
- Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
- Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M.
Maybe you are looking for
-
What is difference between I-mesage and Text Message, some timeI want to send I-message and but I send text and it's charge to me.
-
Blackberry curve 9300 trackpad is no longer working, how do I fix this?
My trackpad has stopped working - I cannot click it or scroll. This is a huge irritation as I can no longer access anything on my phone unless I type in 'text messages' 'blackberry messenger' etc, and press the enter button. Before it stopped working
-
How do I convert a scanned JPEG file to a Word document with Acrobat pro X1?
How do I convert a scanned JPEG document into a Word document. I have Adobe Acrobat Pro Xl.
-
I recently downloaded it with a view to using WMP content but on clicking the green WMV icon nothing happens, so i am not sure how it works. I tried to download WMP 9 for Mac and all that happens is that iMovies opens when the download completes?? An
-
How do I get a blank page with Ctrl-T
When I open a new tab, I get Yahoo Search. I want a nice blank page. == This happened == Every time Firefox opened == I started using Firefox 3.6