Catch CONVT_NO_NUMBER runtime error in OO ABAP Program
Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump. I noticed that this error cannot be caught by CX_ROOT exception class.
Some told me I can use the CATCH SYSTEM-EXCEPTIONS sentence to catch this runtime error, but it is a old-way syntax and cannot be used with the "try" and "catch".
So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing
Hi,
You are not checking for conversion.
You are checking ofr logical expression.
Try below code, it works
DATA error_ref TYPE REF TO cx_sy_conversion_no_number.
DATA err_text TYPE string.
DATA a TYPE i.
TRY.
MOVE 'A' TO a.
CATCH cx_sy_conversion_no_number INTO error_ref.
err_text = error_ref->get_text( ).
WRITE err_text.
ENDTRY.
Regards,
Atish
Similar Messages
-
How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy
Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNingHi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani -
Hi,
A runtime error for overflow (type p) occurs with the following details:
Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Date and Time 06/12/2007 11:33:13
Instead of displaying the dump screen, i'd like to catch the runtime error and display a message instead. The following is the code that causes the error (onhand is too large):
REQRMENT = FORECAST - ONHAND - OPENQTY.
Please help,
Points will be rewarded and all help will be greatly appreciated.
Thanks,
JohnAccording to help, these are the catchable exceptions for a form call:
Catchable Exceptions
CX_SY_PROGRAM_NOT_FOUND
Cause: The specified program was not found.
Runtime Error: LOAD_PROGRAM_NOT_FOUND
Cause: The specified program cannot exist because the program name is longer than 40 characters.
Runtime Error: PERFORM_PROGRAM_NAME_TOO_LONG
CX_SY_DYN_CALL_ILLEGAL_FORM
Cause: The specified subroutine was not found.
Runtime Error: PERFORM_NOT_FOUND
Cause: The specified index was too small.
Runtime Error: PERFORM_INDEX_0
Cause: The specified index was negative.
Runtime Error: PERFORM_INDEX_NEGATIVE
Cause: The specified index was too large.
Runtime Error: PERFORM_INDEX_TOO_LARGE
CX_SY_DYN_CALL_PARAM_MISSING
Cause: The called FORM expects more parameters than were specified.
Runtime Error: PERFORM_PARAMETER_MISSING
CX_SY_DYN_CALL_PARAM_NOT_FOUND
Cause: More parameters were specified than expected by FORM.
Runtime Error: PERFORM_TOO_MANY_PARAMETERS
CX_SY_DYN_CALL_ILLEGAL_TYPE
Cause: In the parameter transfer using the addition STRUCTURE, the addressing offsets/> do not match in the current and target structures.
Runtime Error: PERFORM_BASE_WRONG_ALIGNMENT
Cause: The deep components contained in the current and target structures cannot be passed to each other. This error can only occur in parameter transfer using STRUCTURE.
Runtime Error: PERFORM_CAST_DEEP_MISMATCH
Cause: During the transfer of a generically defined type to the form, a type conflict occurred.
Runtime Error: PERFORM_CONFLICT_GENERIC_TYPE
Cause: The table type of the current parameter does not match the table type of the parameter defined in the form.
Runtime Error: PERFORM_CONFLICT_TAB_TYPE
Cause: The type of current parameter does not match the type of parameter defined in the form.
Runtime Error: PERFORM_CONFLICT_TYPE
Cause: The current parameter occupies less storage space than the target parameter defined in the form. This error occurs only with parameter specification using STRUCTURE.
Runtime Error: PERFORM_PARAMETER_TOO_SHORT
Cause: During parameter transfer with the addition STRUCTURE, the fragment views of the current and target parameters do not match. This error only occurs in Unicode programs in
Runtime Error: PERFORM_CONFLICT_UC_STRUCT
Cause:When the form is called, an internal table is expected as current parameter.
Runtime Error: PERFORM_TABLE_REQUIRED
Cause: A hash table was passed to a parameter defined using TABLES.
Runtime Error: PERFORM_STD_TAB_REQUIRED -
Convt_no_number runtime error
Hi abapers,
When i execute my zprog convt_no_number runtime error coming.
in program i declared rebzg as bsid-rebzg which is char 10.
this field should be either blank or vbeln value , but in table rebzg is stored as ' v ' single char value.
please provide the infrmation
regards,
Hari priyahi Henri,
Thank for for ur reply.
Actually orginal invoice is cancelled in VF11.
when they cancelled orginal invoice in vf11 another cancelled invoice is generated. when i checked this cancelled invoice in fb03 , in invoice ref field ( rebzg ) it is showing '' v'' .
Because of this my zprog is showing convt_to_number runtime error.
please help me its urgent.
regards,
Hari priya -
Error in executing ABAP program. Error occurred when creating dataset
hi,
when I use LKM SAP ERP to Oracle (SQLLDR) to extract data from SAP ERP server. I execute my interface, and it's stop at extract data step.
This is message:
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset/abc/ZODI_13001_6001_GLOBAL.txt
I tried others path name, tried slash or backslash. This is content in code tab
OdiSAPAbapExecute "-UPLOAD=1" "-EXECUTE=1" "-EXECUTEBASE_RKM=0" "-ZRFC_RUN_INSTALL=1" "-ABAP_PROGRAM_NAME=ZODI_13001_6001" "-HOST=10.86.87.24" "-USER=sv_hoa" "-PASSWORD=<@=snpRef.getInfo("SRC_PASS") @>" "-SAP_CLIENT=800" "-SAP_LANGUAGE=EN" "-SAP_SYSTEM_NUMBER=02" "-SAP_FUNCTION_GROUP_NAME=ZODI_FGR_13001" "-CONNECTION_POOL_NAME=SAP_ODI_ERP_POOL_10.86.87.24" "-CONNECTION_POOL_SIZE=10" "-FILE_DELIMITER=<@=""+(char)8@>" "-FILE_NAME=ZODI_13001_6001_GLOBAL.txt" "-FTP_HOST=10.86.82.108" "-FTP_USER=anh" "-FTP_PASSWORD=<@=sFtpPassword@>" "-FTP_PASSIVE_MODE=1" "-FTP_TRANSFER_TIMEOUT=100000" "-ODI_VARIABLE_NAMES=" "-ODI_VARIABLE_VALUES=" "-USER_ABAP_PARAMETER_NAMES=IV_DELIMITER,CHAR3;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_MAX_ROW_CNT,SYTABIX;IV_FETCH_BATCH_SIZE,SYTABIX;" "-USER_ABAP_PARAMETER_VALUES=<Value>" "-USER_ABAP_PARAMETER_SEPARATOR=<Value>" "-ABAP_TABLE_PARAMETERS=RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2" "-ABAP_EXPORT_PARAMETERS=ERRORMESSAGE;SY-MSGV1" "-LOG_FILE_NAME=C:\Users\anh\AppData\Local\Temp\SapAbapExecuteOpenTool_13001.log" "-FTP_PATH=/abc/" "-DEV_CLASS=ZODI_DEVCLASS" "-MAX_ROW_COUNT=" "-FETCH_BATCH_SIZE=100000" "-HASH_VALUE_MARKER=HVM" "-ABAP_PROGRAM_BODY=
*Final Type declarations
TYPES : BEGIN OF ty_final,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final.
*Final Temp Type Declarations
TYPES : BEGIN OF ty_final_tmp,
Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID ,
Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH ,
Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH ,
Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH ,
Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI ,
Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU ,
END OF ty_final_tmp.
*Final Target Type Declarations
TYPES : BEGIN OF ty_final_target,
C0_Y03HOCSINH_HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
C5_Y03HOCSINH_GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_final_target.
* Table type for Y03HOCSINH
TYPES : BEGIN OF ty_Y03HOCSINH,
HOCSINH_ID TYPE
Y03HOCSINH-HOCSINH_ID,
MA_HOC_SINH TYPE
Y03HOCSINH-MA_HOC_SINH,
TEN_HOC_SINH TYPE
Y03HOCSINH-TEN_HOC_SINH,
GIOI_TINH TYPE
Y03HOCSINH-GIOI_TINH,
DIA_CHI TYPE
Y03HOCSINH-DIA_CHI,
GHI_CHU TYPE
Y03HOCSINH-GHI_CHU,
END OF ty_Y03HOCSINH.
TYPES: BEGIN OF gs_text,
line(843) TYPE c,
END OF gs_text.
*Structure Declarations
DATA: wa_final_string TYPE string,
wa_final TYPE ty_final,
wa_final_target TYPE ty_final_target,
wa_Y03HOCSINH TYPE ty_Y03HOCSINH,
*Table Declarations
tt_final TYPE STANDARD TABLE OF ty_final,
tt_Y03HOCSINH TYPE STANDARD TABLE OF ty_Y03HOCSINH,
tt_final_target TYPE STANDARD TABLE
OF ty_final_target,
tt_final_tmp TYPE STANDARD TABLE OF ty_final_tmp,
tt_final_tmp1 TYPE STANDARD TABLE OF ty_final,
gt_result TYPE STANDARD TABLE OF gs_text,
*Variable Declarations
lv_path TYPE string,
lv_flag TYPE char1,
C0_Y03HOCSINH_HOCSINH_ID TYPE
STRING,
C1_Y03HOCSINH_MA_HOC_SINH TYPE
STRING,
C2_Y03HOCSINH_TEN_HOC_SINH TYPE
STRING,
C3_Y03HOCSINH_GIOI_TINH TYPE
STRING,
C4_Y03HOCSINH_DIA_CHI TYPE
STRING,
C5_Y03HOCSINH_GHI_CHU TYPE
STRING,
wa_final_tmp TYPE ty_final_tmp,
lv_file TYPE string,
lv_datum TYPE sy-datum,
lv_date TYPE char10,
wa_result TYPE string,
lv_delimiter type string,
lv_cnt TYPE sytabix,
*-Cursor Declaration
lv_Y03HOCSINH_dbcur TYPE cursor,
lv_tabix_frm TYPE sy-tabix.
lv_delimiter = iv_delimiter.
IF iv_hashvalue = 'HVM'.
*Open/delete output file
CONCATENATE iv_path iv_filename INTO lv_path.
*Check for file existence, if found, delete it
OPEN DATASET lv_path FOR INPUT
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
DELETE DATASET lv_path.
ENDIF.
*Open/create output file
OPEN DATASET lv_path FOR APPENDING
IN TEXT MODE
ENCODING DEFAULT.
IF sy-subrc EQ 0.
*Batch Processing
OPEN CURSOR WITH HOLD lv_Y03HOCSINH_dbcur FOR
SELECT HOCSINH_ID
MA_HOC_SINH
TEN_HOC_SINH
GIOI_TINH
DIA_CHI
GHI_CHU
FROM Y03HOCSINH.
DO.
*Check for the counter, only for first batch
*process new line is required...
lv_cnt = lv_cnt + 1.
REFRESH tt_Y03HOCSINH.
FETCH NEXT CURSOR lv_Y03HOCSINH_dbcur
APPENDING TABLE tt_Y03HOCSINH
PACKAGE SIZE IV_FETCH_BATCH_SIZE.
IF NOT tt_Y03HOCSINH IS INITIAL.
ELSE.
EXIT.
ENDIF.
LOOP AT tt_Y03HOCSINH INTO wa_Y03HOCSINH.
MOVE wa_Y03HOCSINH-HOCSINH_ID
TO wa_final_tmp-Y03HOCSINH_HOCSINH_ID.
MOVE wa_Y03HOCSINH-MA_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_MA_HOC_SINH.
MOVE wa_Y03HOCSINH-TEN_HOC_SINH
TO wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_Y03HOCSINH-GIOI_TINH
TO wa_final_tmp-Y03HOCSINH_GIOI_TINH.
MOVE wa_Y03HOCSINH-DIA_CHI
TO wa_final_tmp-Y03HOCSINH_DIA_CHI.
MOVE wa_Y03HOCSINH-GHI_CHU
TO wa_final_tmp-Y03HOCSINH_GHI_CHU.
APPEND wa_final_tmp TO tt_final_tmp.
ENDLOOP.
free : tt_Y03HOCSINH.
LOOP AT tt_final_tmp INTO wa_final_tmp.
MOVE wa_final_tmp-Y03HOCSINH_HOCSINH_ID
TO wa_final_target-C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_tmp-Y03HOCSINH_MA_HOC_SINH
TO wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_TEN_HOC_SINH
TO wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_tmp-Y03HOCSINH_GIOI_TINH
TO wa_final_target-C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_tmp-Y03HOCSINH_DIA_CHI
TO wa_final_target-C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_tmp-Y03HOCSINH_GHI_CHU
TO wa_final_target-C5_Y03HOCSINH_GHI_CHU.
Append wa_final_target to tt_final_target.
ENDLOOP.
free : tt_final_tmp.
Clear wa_final_target.
IF NOT iv_max_row_cnt IS INITIAL.
Loop at tt_final_target into
wa_final_target TO iv_max_row_cnt.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ELSE.
Loop at tt_final_target into wa_final_target.
MOVE wa_final_target-C0_Y03HOCSINH_HOCSINH_ID
TO C0_Y03HOCSINH_HOCSINH_ID.
MOVE wa_final_target-C1_Y03HOCSINH_MA_HOC_SINH
TO C1_Y03HOCSINH_MA_HOC_SINH.
MOVE wa_final_target-C2_Y03HOCSINH_TEN_HOC_SINH
TO C2_Y03HOCSINH_TEN_HOC_SINH.
MOVE wa_final_target-C3_Y03HOCSINH_GIOI_TINH
TO C3_Y03HOCSINH_GIOI_TINH.
MOVE wa_final_target-C4_Y03HOCSINH_DIA_CHI
TO C4_Y03HOCSINH_DIA_CHI.
MOVE wa_final_target-C5_Y03HOCSINH_GHI_CHU
TO C5_Y03HOCSINH_GHI_CHU.
CONCATENATE
C0_Y03HOCSINH_HOCSINH_ID
C1_Y03HOCSINH_MA_HOC_SINH
C2_Y03HOCSINH_TEN_HOC_SINH
C3_Y03HOCSINH_GIOI_TINH
C4_Y03HOCSINH_DIA_CHI
C5_Y03HOCSINH_GHI_CHU
INTO wa_final_string
SEPARATED BY lv_delimiter.
IF sy-tabix EQ 1 AND lv_cnt EQ 1.
CONCATENATE wa_final_string
lv_delimiter INTO wa_final_string.
ELSE.
CONCATENATE '<@=""+(char)8@>' lv_delimiter wa_final_string
lv_delimiter INTO wa_final_string.
ENDIF.
APPEND wa_final_string TO gt_result.
CLEAR : C0_Y03HOCSINH_HOCSINH_ID,
C1_Y03HOCSINH_MA_HOC_SINH,
C2_Y03HOCSINH_TEN_HOC_SINH,
C3_Y03HOCSINH_GIOI_TINH,
C4_Y03HOCSINH_DIA_CHI,
C5_Y03HOCSINH_GHI_CHU.
ENDLOOP.
ENDIF.
free : tt_final_target.
IF NOT gt_result IS INITIAL.
CLEAR wa_result.
LOOP AT gt_result INTO wa_result.
TRANSFER wa_result TO lv_path.
ENDLOOP.
ENDIF.
REFRESH gt_result.
*End of main loop for batching
ENDDO.
*Close dataset
CLOSE DATASET lv_path.
CLOSE CURSOR lv_Y03HOCSINH_dbcur.
ELSE.
DATA: lv_mesg TYPE string.
CLEAR et_file_return.
et_file_return-type = 'E'.
CONCATENATE
'Error occurred when creating dataset' lv_path
INTO lv_mesg.
et_file_return-message = lv_mesg.
Append et_file_return.
ENDIF.
ELSE.
CLEAR et_file_return.
et_file_return-type = 'E'.
et_file_return-message =
'Installed ABAP program does not match interface definition'.
APPEND et_file_return.
ENDIF.
Thanks for helpr u able to figure it out..........i got the same error .......can someone help me fix this issue
-
Hello,
I tried to run my application on LM3S8962.
The build succeeded. All LEDs are green,
but the application doesn't run.
The error message appears in the status window:
[17:06:21] Status: Build Succeeded.
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c at line 141: 2 19
This message isn't really enlightening to me.
Doesn't anyone know how to solve the problem?Hi Peter,
i tried to modify the code to isolate the problem.
With the attached code the new error message appears:
LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\blockdiagram\CCGClusterSupport.c at line 141: 2 13
What are the limits of clusters in LV ARM?
My Toolchain:
Tool Version Numbers:
Toolchain: RealView MDK-ARM Version: 4.11
Toolchain Path: BIN40\
C Compiler: Armcc.Exe V4.0.0.728
Assembler: Armasm.Exe V4.0.0.728
Linker/Locator: ArmLink.Exe V4.0.0.728
Librarian: ArmAr.Exe V4.0.0.728
Hex Converter: FromElf.Exe V4.0.0.728
CPU DLL: SARMCM3.DLL V4.11
Dialog DLL: DLM.DLL V1.19a
Target DLL: BIN\UL2CM3.DLL V1.63
Dialog DLL: TLM.DLL V1.19a
Thanks
Marco
Attachments:
ICUA4_SOURCE_DISTRIBUTION.zip 463 KB -
Error messages in ABAP program are stored in which table
hi all,
Can anyone tell
error messages in ABAP program are stored in which table??Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
Fuction module for storing error messages ->'format_message'
for example...
data : v_message(100) type c.
call transaction NNNN mode A update S messages into it_messages.
loop at it_messages where msgty = 'E'.
call function 'format_message'
exporting
*it_messages details
importing
v_message.
write :/ v_message.
clear v_message.
endloop.
Anothe method - ->
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP. -
Error when exporting ABAP Programs and the Project
Hi All,
I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
- Screenshot 1 shows an error when exporting a Project.
- Screenshot 2 shows an error when exporting ABAP Program(s).
These errors occur in the DEV environment.
Please help.
Thank you all.
Kind regards,
RoliHi Ramakrishna,
I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
In CMC we had to configure the system to Generate ABAP = True.
Thank you.
Kind regards,
Roli -
Error out the ABAP program execution
I have an ABAP program which transfers data from a file to a database table thru function module in packages of 50,000 records.
Upon the successful completion of this ABAP program, I start dependent processes.
Sometimes the function module does not transfer the data and returns the exception back to the ABAP program - which is an expected scenario. Currently when ever an exception is received in the function module, I stop the ABAP program with a STOP statement.
The ABAP program stops, which meets my first objective. But what happens is, if you look at the job log --> it is Completed in terms of program execution and the dependent processes automatically start - which is not meeting my second objective.
My second objective is to force the ABAP program to error out in such a way that .........
1) The program execution is stopped
2) If I look at the job log it should not be Completed (I am looking for something like Cancelled so that the dependent process do not get started automatically)
Is it possible to error out the ABAP program execution by raising an exception or something, so that when i look at the job log - it shows Cancelled and not Completed?
Let me know if you have any questions.
Thanks,
RK.Adrian,
Thanks - This is exactly what I was looking for, it works.
For some reason Messages skipped my mind and I was looking at raising Exceptions
Solution:
if sy-subrc NE 0.
message id 'abc' type 'E' number 000.
endif.
Thanks,
RK.
Edited by: RK on Jan 17, 2010 7:47 PM
Edited by: RK on Jan 17, 2010 7:50 PM
Edited by: RK on Jan 17, 2010 7:52 PM -
Error while calling ABAP program from Data Services
Hi All,
We have a ABAP program which accepts two parameters 1] a date 2] a string of comma separated ARTICLE numbers .
We have used a ABAB transform in ABAP dataflow which refers this ABAP program.
If I pass a string of 6 articles as second parameter the job executes successfully
But if i pass 9 articles as follows
$GV_ITEM_VALUES='3564785,1234789,1234509,1987654,1234567,2345678,3456789,4567890,5456759';
i get the following error
ABAP program syntax error: <Literals that take up more than one line are not permitted>.
The error occurs immediately after ABAP dataflow starts, ie even before the ABAP job gets submitted to ECC
I am using BODS 4.2 . The datatype of $GV_ITEM_VALUES is varchar(1000).
The ABAP program that gets generated by the DS job has the following datatype for this parameter
PARAMETER $PARAM2(1000) TYPE C
Is there a different way to pass string characters to ABAP transform in data services?
I have attached the screen shot of trace log and error
Regards,
SharayuHi Sharayu,
The error your getting is because the literals exceeds more than 72 characters.
It seems that the length of the string is exceeding more than 72 character.
Can you check the following in ECC GUI
Go to Transaction SE38=>Utilities=>Settings=>ABAP Editor=>Editor=> Downwards -Comp.Line Length(72).
The checkbox which defines length 72 must be clicked so the error is coming. Can you uncheck the checkbox and then try passing the parameter $GV_ITEM_VALUES using the BODS job
Regards
Arun Sasi -
Runtime errors in module pool programming
HI all,
I have done a module pool program for invoice tracking level wise.
I am encountering a runtime error, LIST_TOO_MANY_LPROS, while execution ie., for two and more than two updations of the database.
The error analysis says that "At present, the maximum permitted number of nested screen levels is restricted to 50".
Short Text :- "No further list processing possible".
Can anyone please come out with a solution for this problem.
regards
samarendra.
Edited by: samarendra penugonda on Nov 5, 2008 5:03 AMHi
U should replace the comand CALL SCREEN with LEAVE TO SCREEN.
The command CALL SCREEN create an internal mode to link the calling screen to called screen automatically: in this way when it needs to back to calling screen it doesn't need to specify the screen number but only to use:
- LEAVE TO SCREEN 0.
or
- SET SCREEN 0. LEAVE SCREEN.
Now if you use LEAVE TO SCREEN, u need to indicate the screen when it needs to back to calling screen:
- Go from 100 to 200
LEAVE TO SCREEN 200. (Instead of CALL SCREEN 200)
- Back to 100.
LEAVE TO SCREEN 100. (Instead of LEAVE TO SCREEN 0)
Max -
Extract forecast results and accuracy (errors) in an ABAP program
Hi Experts,
We are executing forecast in background using planning jobs in a process chain. We are doing this in 2 stages - 1. at Product group & Location level and 2. at Product & Location level. The selection ids that we have created for these jobs contain multiple product & locaton combinations or product group & locaton combinations.
We can see the forecast reults, messages and errors in the job logs and messages (in the process chain ad spool). I would like to extract this same information into an ABAP program. We are basically tryig to find out the Product group and location combinations for which the MAPE is greater tha 50%.
There is a table /SAPAPO/FCSTACCU which gives the MAPE and other forecast errors. There is a fileld "Pointer for forecast results", I'm not able to relate this with our Product group & Location codes. Can anyone give me any ideas on how to proceed?
Thank you indeed for your contribution.
Best regards,
Fasial AliHi
All the background job are getting stored in the following tables
/SAPAPO/LISLOG
/SAPAPO/LISMAP
I think here you should able to find out all the information per product , location. As the respective information is available in tables, you can use them in ABAP program.
I hope this will help you.
Amol -
Error while exporting ABAP programs for transport
Hi,
In the process of exporting my abap programs so that they can be transported, I released my work request.
However, during release, errors were encountered, and the status of the release was set to 'Release Started'.
The error encountered was
'[STOP ICON] ===> HALT: rscpi_init fails with rc = 1 (twconv. c:957) Please contact the SAP support.'
Can anyone help? Thanks.check all the objects used in ur report are in same package
Edited by: BrightSide on May 14, 2008 3:53 PM -
Runtime error when running sample program VS8, occi10
Please, help!
When running a sample program (VS2005 v8, oraocci10.lib, oraocci10.dll, both downloaded from the recommended Oracle site http://www.oracle.com/technology/tech/oci/occi/occidownloads.html for Oracle release 10.2.0.3.0 )
I receive the following runtime error:
R6034 An application has made an attempt to load the C runtime library incorrectly.
When I build the program with VS 7 or VS 7.1 libraries, I receive env->CreateConnection errorHi,
Can you just give more explanation on what you are trying to do, like conditions.
Are doing first time init.
Reg
Pra -
When trying to go from Organizer to Editor, I receive a Ryntime Error. It reads: Microsoft Visual C++ Runtime Error. Runrime Error Program c:\(x....
I kept getting the same error message too! Thank goodness I'm not alone in this!
Maybe you are looking for
-
Dialog instance on PI7.0
Hello Gurus, I need some information about settingup dialog instance for our PI7.0. What is the installation procedure and what needs to be configured on ABAP and JAVA stacks? Also, if we need to setup different clients on PI, how can I do the cl
-
DBM Order Control configuration steps..
Hi All, We have got a requirement and need to create new Events/Actions etc in Order Control. Since I am new to DBM, I need some guidance to configure actions etc under Order Control. I am trying to search on net but not getting some comprehensive do
-
SAP Utility to Generate New Include for Output Determination?
We transported our stuff to Prod. We do not see the SAP include created....I know I used a utility before to generate SAP include code. Does anybody know what that is? Thank-You.
-
Error Java System: unknow error of portal comunication
Hi All! I get the following error when opening a WAD Template in the WAD Application. <b>"Error Java System: An unknow portal comunication error has ocurred"</b> After accept this error, it opens the template and I can work with it, but when I make c
-
Catch/Prevent System.exit call in other thread
Wasn't sure where to put this so apologies if this is in the wrong section. I have an application that runs a particular method contained in a JAR that is written/provided by somebody else (they implement an interface I provide). They have complete f