Catch Error message from WLI Process

Hi,
I have a big application developed with WLI and I wanna know if there is a way to recive error messagem from this application throught the ALSB. The ALSB call a WLI jpd procces by BussinesProxy.
For example, when occurs a database error into JPD proccess, I want to receive this error and log it or pass it to another application to nofify error and so one.
All the procces in my WLI application were developed with ClientRequestWithReturn and I am thinking in put in this return one tag called <ERROR>ORACLE-0002 - JDBC ERROR bla bla</ERROR> in case off error and <ERROR>FALSE</ERROR> when everythig went OK at the WLI Application.
Is there another way to do this?
Thanks!
Edited by denimar at 05/12/2008 2:33 PM

Hi,
Try throwing an RPC SoapFaultException from your JPD. That should make it back to ALSB as an error and does not count as "Unhandled Exception" by WLI. Although SoapFaultExceptions are a pain to create.
Otherwise passing an error element back in the body has worked fine for me in the past.

Similar Messages

How to show execution error message from a Process

hi
i have a requirement like to display the error messsage returned by the proceure.
I have a process with point After Submit and validations, where i am calling a procedure which returns the execution status with SUCCESS or FAILURE;
and if it FAILURE, it will return the error_message also, how can i show this message to the user just like how we are showing the process success message/validation message.
And i need to stop the process execution there itself once its got failed;
how can i achieve these two? anyone can give some inputs....
thanks in advance
renjish

paul and denes, thanks for the quick reply...
i tried the both option the message is coming properly. but the thing is i want to stop the execution there itself where i got the error from the procedure and the page should be remained in the same page.
currently i have a page 10(customer search screen), from there i called page 102 (customer edit screen) and in the page 102 i attached the process which includes the procedure to update the customer details;
Normally if update is success, the procedure will return SUCCESS and its navigating to the page 10(customer search screen.). so here if FAILURE is returning by procedure, i need to be in the same page i.e 102(customer edit) by showing the error message..just like a validation message...
currently whatever the procedure returns either SUCCESS or FAILURE, it goes to previous screen, but i need the method just like how the validation works if it fails.
hope you got....
regards
renjish

Catching error message from standard function module to internal table.

Hi,
i am calling a FM in my custom prog.
After execution of the FM some auto generated errors is getting displayed.
I want to pass this error to an internal table.
Please tell me how to do this?
    CALL FUNCTION 'FORMAT_CHECK'
      EXPORTING
        i_checkrule   = t005-prbkn
        i_checkfield = it_ven-bankn
        i_checklength = t005-lnbkn
        i_checkmask   = space
        i_fname       = fname
      EXCEPTIONS
        not_valid     = 1
        OTHERS        = 2.
IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
I want to catch this particular error message in the itab.
Thanks,
SAM.

Even we can create an internal table nad move the messages to it.
DATA : BEGIN OF L_ERR OCCURS 0,
        SNO LIKE SY-tabix,                                  "serial no
        MSGTY LIKE SY-MSGTY,                         "message type
        MSGNO LIKE SY-MSGNO,                        "message no
        ERR_TEXT LIKE T100-TEXT,                     "message text
       END OF L_ERR.
   IF SY-SUBRC <> 0.
          L_ERR-SNO      = SY-TABIX.
          L_ERR-MSGTY    = SY-MSGTY.
          L_ERR-MSGNO    = SY-MSGNO.
          L_ERR-ERR_TEXT = TEXT-015.                        "Problem encounterd in uploading data.
          APPEND L_ERR.
          clear L_ERR.
     ENDIF.

Messages from IDoc processing can be found in application log

We are using the IDOC_INPUT_INVOIC_MRM Function Module to post Inbound Vendor EDI Invoices. During testing, we sometimes see the error "Messages from IDoc processing can be found in application log". We then have to check transaction SLG1 to ascertain the 'real' issue, e.g. "No GR documents found". In a Production environment however, this will be very inconvenient. Our business users process their own iDoc errors according to the iDoc Status, so to have to call up another transaction, and select the correct Application Log to find the true error, is not a process I would feel comfortable with for our users.
My question is, can we configure/determine which messages are passed to the iDoc Status, or redirect Application Log messages ? Might a Z version of FM IDOC_INPUT_INVOIC_MRM be the way forward ?
Many thanks,
Paul.

Hi,
Just monitor your error idocs in WE20 transaction. Give idoc number here then execute, you can see the all three records(control, data, status). Click on status record node then double click
on status number(e.g 51), it will take you to another screen there you click on "application log" button on application toolbar. This is the standard way finding the application log of an idoc, even i am finding the application log on production server like this.
Thanks,
Asit Purbey.

How to get error message from the BPEL process

Hi,
We have some BPEL processes running in BPEL PM 10g. If any of these BPEL process fails, we would like to get the error message caused this process to fail.
Please let me know where does the BPEL proccess holds (table/file) these details. or is it possible to get the error message programatically.
Thanks

You can go through below link that can help
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1186
http://bpelknowledge.blogspot.com/2010/07/error-conditions-that-cannot-be-handled.html
http://blog.whitehorses.nl/2009/11/03/error-handling-in-soa-suite-11g/
Hope it helps!!
Thanks
AJ

Is it possible to send error message from Adapter Module to CCMS?

Hi
Is it possible to send error message from Adapter Module to CCMS...?I have written on adatper module from there i have to send error message to CCMS or SXMB_MONI. Is it possible if yes please send me the related documents
Best Regards
Ravi Shankar B

Hi
I have written following User Defined Exeption in my Module program
class DuplicateFileException extends ModuleException{
          DuplicateFileException(String message){
               super(message);
I am throwing my Exception like this
try{
     throw new DuplicateFileException("Duplicate File");
}catch(DuplicateFileException e){
     throw e;
But i am not getting this exception in SXMB_MONI. In adpater monitoring i am getting the following exceptions
<b>
2007-05-16 15:51:30 GMT+05:30: Retry interval started. Length: 5.000 s
- 2007-05-16 15:51:30 GMT+05:30: Error: java.lang.NullPointerException
- 2007-05-16 15:51:30 GMT+05:30: An unknown error occured.
- 2007-05-16 15:51:30 GMT+05:30: Processing started
- 2007-05-16 15:51:25 GMT+05:30: Error: java.lang.NullPointerException</b>
can any one give me the idea how to send error from module program to SXMB_MONI
Thanks & Regards
Ravi Shankar B

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

Error message from Internet Explorer v8.0.6

My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.

Hi Artby,
In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
Hope that helps,
Andrew

Error Message from VM TMS 13.0

Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben Lai

This seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142

Error message from Application Server

Hi All,
Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
Thanks in advance,

hi,
it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
we can see all the application server files in this Tcode: AL11

How can I Fetch the error message from a OAF page

Hi,
A confirmation message is coming on the page,I want to catch the error message and depending on its value want to add some validation.
Is that possible to fetch the error message from the page?

is it a confirmation message or an error message ?
Code in the OAF page would be raising an OAException with a message name defined in message dictionary.
you would need to look at the code to understand where this is thrown from and add your validation there.
Tapash

A way to display error messages from the program

Dear all,
I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
I wanted to know the better way of displaying error messages from my program with more options.
Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
But I found some stanadard transactions (Like in MM and FI where errors are shown in a better way, but failed to find out how they are done.
Please guide me.
Thanks in advance
Aryan

Try to use application logging it has a very good way to display a set of messages.
[http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
Run this report in se38 an example sap report to understand logging way to show a set of messages
Report Name : SBAL_DEMO_01
Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

Cancel System Error Messages from RWB

Hi All,
I have nearly 3000 messages those were got System Error in Integration Engine process, but when i check messages in SXMB_MONI all are success and written to target folders also.There is no problem absolutely.
Now i just want to cancel those System Error messages from RWB--Message Monitor to keep system green and do not want to see those system error messages again.
Iam not able to cancel those messages from RWM, it is saying that User and pwd incorrect but iam providing correct one only.
I went to details of that system error message from Message Monitor, i took message id and filtered with that in SXMB_MONI. i got the message with error state.Iam able to cancel that from MONI but not from RWB which is fine and disappearing from RWB list.
the thing is i can't copy each and every message id by opening details button for every message
How can i proceed for this. please advice me
REgards

Hi Ravi,
For example iam able to see system error message in RWB--Message Monitor under Integration Engine at 9:30
when i execute SXMB_MONI for the same time and see, there is no error message for that able to see success.
When i took message id from RWB--message monitor and filter that in MONI means it is showing me the error message.
I can able to cancel it from MONI which is fine. but this way i have 3000 messages in RWB--Message monitor under IE.
How to copy and paste then filter those error messages in MONI???this is pain process to copy each and every one by one
Iam not able to get those if i filter with the status group as System Error manual Restart Possible criteria
Regards

Catch Error message from WLI Process

Similar Messages

Maybe you are looking for