CATS Field selection screen

Hi,
In CATS field selection screen -> Screen groups -> under work list and Data entry selection, I have chosen the fields Network, Activity Type, Activity, Sender Cost center, Plant, Total and Short text to be displayed / input.
Out of these in CAT2, I am able to view only Activity and Total under Worklist area and Sender cost center and Total in Data entry screen...
Why is this so and wat could be the error....
Note : I did configurations under Settings for CATS for Service Providers node.
Regards
Nima

Check whether you have maintained the same data entry profile for yourseelf , under which you have saved the fields list.
CAT2 view depends on the data entry profile chosen for the user.
Thanks
Rakesh

Similar Messages

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Read only field in selection screen

hi friends,
    I am using selection screen for getting input.one field must be hardcoded & should not be changed but the user wanted that field also to be displayed in screen as read only. Is it Possible? If possible, how it is possible? please help me
Thanks & Regards
Nigesh

hi nigesh,
<b>the solution to your problem is here below ,just check the code .</b>
here u can see that the value of a parameter is hardcoded and made as an output field .
selection-screen begin of block 1 .
parameters : p_bstyp type c modif id abc.
selection-screen end of block 1.
*******************INITAILIZATION .****************************
initialization.
p_bstyp = 'F'.
**************VALIDATIONS 'AT SELECTION SCREEN ' .*************
*at selection screen output for document category field to be fixed to 'f'.
at selection-screen output.
loop at screen.
    if screen-group1 = 'ABC'.
      screen-input = 0.
      modify screen.
    endif.
endloop.
revert back if u haveany queries.
PLEASE REWARD POINTS IF USEFUL.

How to validate ch field in selection screen

hi experts.......
how to validate ch field selection screen......... and which function module is used to validate parameter field i.e character

Hello,
            Is your requirement to Validate the Character Field? This is what I understand. If it is right, then do you want to Validate whether a Character Value is entered?
            Check the below Sample Code.
At Selection-Screen on P_CHARFIELD.
    IF P_CHARFIELD CA '1234567890'.
        Message 'Enter an Alpha Character only' Type 'E'.
    Endif.
Thanks and Regards,
Venkat Phani Prasad Konduri

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

ALV using OOABAP fieldnames changing in the selection screen

Hi
I am new to OOABAP.Here is the requirement.
I need to create a ALV report, in the selection screen field label can change and it needs to display in ALV report. selection screen contains 4 checkboxes. based on selection hide the columns in ALV display.
Can anyone help me in this?
Thanks
sapien

u build field cat "at selection-screen event.
LET S_A, S_B, S_C, S_D BE THE SELECTION SCREEN FIELD.
AT SELECTION-SCREEN.
PERFORM BUILD_FIELDCAT USING S_A S_B S_C S_D.
form build_fieldcat using s_a type ... s_b type .... so on
if s_a = 'X'.
FIELDCAT-FIELDNAME = '......'.
append fieldcat.
if s_b = 'X'.
FIELDCAT-FIELDNAME = '......'.
append fieldcat.
IF S_C = 'X'.
FIELDCAT-FIELDNAME = '......'.
append fieldcat.
IF S_D = 'X'.
FIELDCAT-FIELDNAME = '......'.
append fieldcat.

RFDOPR10 selection screen modifications

Hi,
I am attempting to modify the transaction S_ALR_87012178. I have copied RFDOPR10 into ZRFDOPR10.
I need to modify the selection screen. The problem I am encountering is that there are only some selection-screen elements in the report. Where are the other ones coming from? IE. Customer selection through Line item selection.
The only elements that I can find in the report are Output Control and Further selections.

Option 1:
On the program attributes screen where the link to the logical database is, there is a field "Selection Screen" which for some logical databases gives you a choice of what selection screen the LDB will provide, perhaps even a blank one.
Option 2:
In some cases where a selection screen is set up by a logical database, there are options available in customizing through SPRO to control the layout of that selection screen.
The one I am familiar with is logical database PNP for HR where the resulting selection screen can be changed significantly in HR customising.
It may be that there are some similar options for the DDR selection screen - I suggest you check the relevant area of the IMG (SPRO), particularly any "Information System" customizing options.
hope this is of some assistance.
Andrew

Selection screen layout Issue

i have a requirement where i have to customize the layout dynamically in the report output.the layout should be changed as per the selection screen field entry.is this possible?

Hi,
Check this one, How it is changing dynamically
TABLES : mara,marc.
************************Selection screen fields******************************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS    : p_meth1 RADIOBUTTON GROUP g1 USER-COMMAND g1,
                p_meth2 RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK matnr
                          WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_matnr FOR marc-matnr MODIF ID m1.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : so_werks FOR marc-werks MODIF ID m1 .
SELECTION-SCREEN END OF BLOCK matnr.
SELECTION-SCREEN BEGIN OF BLOCK file WITH FRAME TITLE text-003.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_fpath TYPE ibipparms-path MODIF ID m2 LOWER CASE.
SELECTION-SCREEN END OF BLOCK file.
SELECTION-SCREEN BEGIN OF BLOCK date WITH FRAME TITLE text-004.
SELECTION-SCREEN SKIP 1.
PARAMETERS     : p_date TYPE datuv.                         "CCT51576.
SELECTION-SCREEN END OF BLOCK date.
***********************Screen Validation*********************************************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    CASE screen-group1.
      WHEN 'M1'.
        IF p_meth1 <> 'X'.
          screen-active = 1.
        ENDIF.
        IF p_meth2 = 'X'.
          screen-active = 0.
        ENDIF.
      WHEN 'M2'.
        IF p_meth2 = 'X'.
          screen-active = 1.
        ELSE.
          screen-active = 0.
        ENDIF.
        IF p_meth1 = 'X'.
          screen-active = 0.
        ENDIF.
    ENDCASE.
    MODIFY SCREEN.
ENDLOOP.

Designing a selection screen

How can we design a selection screen.
a.select-option / Purchase document number
b.provide F1 help for the field.

SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_EBELN FOR ekko-EBELN.
SELECTION-SCREEN END OF BLOCK b1.
F1 help will be automatucally provided.

Sequence of AT SELECTION-SCREEN events

Hi All,
I have a requirement where i need to have two fields selection screen, where the second field should have f4 help depending on the first field.
So, i have validated the first field through AT SELECTION-SCREEN ON <FIELD1>. and for the second field i am using AT SELECTION-SCREEN ON VALUE-REQUEST FOR <FIELD2>
The problem i am facing over here is when i give first field input and press F4 in the second field it is not validating the First field and instead it is showing FIELD1 as blank to over come this i need to press enter before i press F4 in the second field. Is there any other alternative to over come this problem.
Is there any sequenec for the AT SELECTION-SCREEN events to be used.
Thanks
Shashikanth

Hi Shashi,
Check the below code
and for your future ref
Table Control dynamic F4
DATA : BEGIN OF f4_tab OCCURS 0,
         carrid TYPE sflight-carrid,
         connid TYPE sflight-connid,
    END OF f4_tab.
   CLEAR lin.
" adjust this as per your requirement
DATA : dynpread TYPE TABLE OF dynpread WITH HEADER LINE.
REFRESH dynpread.
CLEAR dynpread.
dynpread-fieldname = 'ITAB-CARRID'.
* dynpread-stepl = lin.
APPEND dynpread.
CLEAR dynpread.
at selection-screen on value-request for YOUR_FIELD " Your Second Field here
CALL FUNCTION 'DYNP_VALUES_READ'
        " This FM gives the First field value before u press Enter/ PAI is triggered
    EXPORTING
      dyname                               = sy-repid
      dynumb                               = sy-dynnr
    TABLES
      dynpfields                           = dynpread
   EXCEPTIONS
     invalid_abapworkarea                 = 1
     invalid_dynprofield                  = 2
     invalid_dynproname                   = 3
     invalid_dynpronummer                 = 4
     invalid_request                      = 5
     no_fielddescription                  = 6
     invalid_parameter                    = 7
     undefind_error                       = 8
     double_conversion                    = 9
     stepl_not_found                      = 10
     OTHERS                               = 11
IF sy-subrc IS INITIAL.
    READ TABLE dynpread WITH KEY fieldname = 'ITAB-CARRID'.
    IF sy-subrc IS INITIAL.
      SELECT carrid connid FROM sflight
            INTO TABLE f4_tab
             WHERE carrid = dynpread-fieldvalue.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield               = 'CONNID'
         dynpprog               = sy-repid
         dynpnr                 = sy-dynnr
         dynprofield            = 'ITAB-CONNID'
         value_org              = 'S'
        TABLES
          value_tab              = f4_tab
    ENDIF.
ENDIF.
Cheerz
Ram
Edited by: Rob Burbank on Mar 18, 2010 9:01 AM

Additional text field in Infoset deleted but not reflected in field selection in Query

Hi,
I have deleted an additional text field in infoset. It was used in one query.
Even in the query it is deleted, but when in field selection screen i am not able to delete.
If i try to execute the query, I get dump (syntax error) saying in field type(additional field) doesnot exist.
Can anyone pleassseee help me in this.

Hi San,
I am trying to understand. How could you separately delete an additional text field associated with a main field?
Jogeswara Rao K

Field Selection Keys related to Purchase Order

Hi,
I have a query regarding Field Selection Key.
When we go to Field Selection Screen connected to Purchase Order, we can find so many Field Selection Keys viz., $$$$, $$$2, AKTH, ME21N, etc.
How to judge which is to be used when?
I like to know how these Field Selection Keys are linked to Purchase Order Screen in the background.
Please guide me in this regard by giving proper suggestions in this regard.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829

Hi Karthik,
Thanks for your valuable information.
I like to know few more things.
1) Is it possible to create our own Field Selection Key?
2) If you observe the list of Field Selection Keys related to Purchase Order Screen, you can see that there are Field Selection Keys by name ME21N, ME21, AKTH, etc.
If the Field Selection Keys are predefined by SAP, it is OK. But, if there is an option to create our own Field Selection Key, then what is the procedure to do the same?
It seems that ME21N, ME21, and AKTH are used for Create Purchase Order Screen.
There are also keys ME22N and ME23N used for Change Purchase Order Screen and Display Order Screen.
I am little bit confused about this.
We are linking the Field Selection Keys to the Document Types.
But, I think it is only for create Purchase Order Screen. Please correct, if I am wrong.
Also, I like to know how we are linking the Field Selection Keys related to Change Purchase Order Screen and Display Purchase Order Screen?
Please clarify all my doubts by giving proper suggestions.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829

Need help on search help on selection screen field

Hi guyz,
Please tell me how to pass the parameter or restrict the below search help.
*s_bsart FOR ekko-bsart . " Doc. Type*
For the above selection screen field i need to display the data only for cat = F if i click search help.
Thanks,
Mohamed Kaleel

Hi,
Use At selection-screen for value-request for s_bsart.
SELECT_OTPIONS: s_bsart FOR ekko-bsart.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bsart.
CALL SCREEN 100 STARTING AT 10 5
ENDING AT 50 10.
MODULE value_list OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS space.
NEW-PAGE NO-TITLE.
s_bsart-low = 'F' / 'CAT=F'.
write :/ s_bsart-low.
Hide: s_bsart-low
clear s_bsart-low.
ENDMODULE.
AT LINE-SELECTION.
LEAVE TO SCREEN 0.
This will resolve the issue.
Regards,
Gurpreet

Field catalog restriction with the selection screen input

Hi,
I am doing ALV grid report.In that I am facing problem,fieldcat has to display according to the input given in the selection screen.
my selection screen value is s_gstrp+4(2) that is month given inthe input.
     PERFORM FIELD_CATALOG TABLES IT_FIELDCAT
       USING: 'IT_COL_PLAF' 'PWWRK' 'X' 'Plant' ' ',
             'IT_COL_PLAF' 'MATNR' ' ' 'Material' ' ',
             'IT_COL_PLAF' 'MAKTX' ' ' 'Material description' ' ',
             'IT_COL_PLAF' 'MEINS' ' ' 'Unit' ' '.
      PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
                 'IT_COL_PLAF' 'GSMNG_01' ' ' 'Jan-Qty' ' '.
      PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
                 'IT_COL_PLAF' 'GSMNG_02' ' ' 'Feb-Qty' ' '.
        PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
                 'IT_COL_PLAF' 'GSMNG_03' ' ' 'Mar-Qty' ' '.
      PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_04' ' ' 'Apr-Qty' ' '.
         PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_05' ' ' 'May-Qty' ' '.
          PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_06' ' ' 'Jun-Qty' ' '.
        PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_07' ' ' 'Jul-Qty' ' '.
        PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
         'IT_COL_PLAF' 'GSMNG_08' ' ' 'Aug-Qty' ' '.
          PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_09' ' ' 'Sep-Qty' ' '.
         PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
         'IT_COL_PLAF' 'GSMNG_10' ' ' 'Oct-Qty' ' '.
         PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
         'IT_COL_PLAF' 'GSMNG_11' ' ' 'Nov-Qty' ' '.
        PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
        'IT_COL_PLAF' 'GSMNG_12' ' ' 'Dec-Qty' ' '.
if month given in select-option : sep to dec ie,1.09.2009 to 31.12.2009.
then my field cat has to display,sep qty,oct,qty,nov qty,dec,qty.
Suggest some ideas.
regards,
Bathri

hi,
Use
if month ge 09 .
PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
          'IT_COL_PLAF' 'GSMNG_09' ' ' 'Sep-Qty' ' '.
endif.
if month ge 10.
         PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
         'IT_COL_PLAF' 'GSMNG_10' ' ' 'Oct-Qty' ' '.
endif.
if month ge 11.
         PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
         'IT_COL_PLAF' 'GSMNG_11' ' ' 'Nov-Qty' ' '.
endif.
if month ge 12.
        PERFORM FIELD_CATALOG TABLES IT_FIELDCAT USING:
        'IT_COL_PLAF' 'GSMNG_12' ' ' 'Dec-Qty' ' '.
endif.
if month given in select-option : sep to dec ie,1.09.2009 to 31.12.2009.
then my field cat has to display,sep qty,oct,qty,nov qty,dec,qty.
If if you give month in selection screen you will get relevant month details .
Regards
Nandan.N

Regarding Selection Screen field making display field in ALV report

Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shailesh

hii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta

CATS Field selection screen

Similar Messages

Maybe you are looking for