CATS with time approvals

Hi all,
we are configuring CATS WITH TIME APPROVAL and transfering data to HR,PS,CO.Now the problem is i have configured cats with out time approvals.Is there any procedure or transaction to configure CATS With Time approvals.Can any of you help me out in this.
Thanks in advance.
Regards

Hi kavita, follow the path
personnel mngmt>Employee self service>Ess settings for specific service>time management>set up data entry profiles and field selection> create DATA Entry profile> click on the profile u r using and check under GENERAL SETTINGS and ENSURE U FLAG "Approval Required".
hope this helps.

Similar Messages

CAT's Time Booking in TECO

Hi All,
We are booking Time on WBS and Network Activity using CAT's.
My concern is, Time booking should not be allowed, when WBS Status is Set to TECO.
I have tried to Use User Status but, unable to get suitable object related to HR CAT's Time booking in User Status Profile in SPRO.
Let me know how we can do it or is there any alternate option available?
regards,
Atul Rajmane

Atul,
A WBS with TECO status will not permit Commitment generation but permit actual posting.If you want to block any further actual postings permenantly, either you can set the status of the WBS to closed.
Or If you want to temporarily block the actual cost booking, you can lock the account assignment status.
Or If you want to block only time booking by CATS, then you have to go for user status as per your idea.
Try forbidding activity allocation as Abdul stated.
Even then you will get an error message only when you are transfering the work hours.
So you have to validate your enties during time sheet booking itself.Try some exits as Gokul stated.Try "EXIT_SAPLCATS_003"

Getting online with Time Warner Cable (Roadrunner) cable modem

I have wasted a tremendous amount of time with Time Warner since switching from Verizon (New York City), as they are CLUELESS as to how to make a MAC connect to the modem. What settings do I use? It does not find it automatically, I know that much. And they have assured me it's not the modem, but that there's 'something wrong' with my computer. Since it worked fine with Verizon, and another Mac I have which works well in multiple locations with multiple connections also failed, I'm pretty sure there's nothing 'wrong' with my computer. Just tech support ignorance.
Any help?
Thanks
Shelley

Setting up a local Ethernet network
Equipment needed:
Cable/DSL modem: usually supplied by the ISP
Gateway/Router: at least a 4-port router, but you can get them with more ports if you need them. (Alternatively, you can get a switching hub to provide additional ports.)
CAT 5 Ethernet cables: one cable is needed for each device connected to the router plus one to connect the router to the cable/DSL modem.
1. Connect the Cable/DSL modem to the router's WAN port using an Ethernet cable (CAT 5 for 10/100.)
2. Connect each computer to the router's LAN ports using Ethernet cables. If you have network printers, etc. connect them to a LAN port on the router. If the router doesn't have enough ports, then you will need to purchase one with more ports or connect a switching hub to the router.
3. Now, for each Mac open its Network preference pane. Select the Built-in Ethernet port for configuration. In the TCP/IP configuration window set the connection/configuration to DHCP from the dropdown menu. Set your Location dropdown menu to Automatic and the Show dropdown menu to Built-in Ethernet.
4. Shut everything off. First, turn on the Cable/DSL modem and wait for the connect lights to indicate it has connected to the ISP. Next, turn on the router and wait to see if the Cable/DSL modem's communication status light starts to flicker. Also, if there is a status light on the router it should show a connection. Last, power up the computer. If all is well the TCP/IP control panel or Network pref pane should indicate an IP has been obtained from the router, usually in the 192.168.nnn.nnn range. If it's 169.xxx.xxx.xxx then you don't really have a connection.
5. If you have network printers connected each printer will have to be assigned its own unique IP address in the router's address range (usually 192.168.nnn.nnn.) Assign the printer(s) IP addresses above the number of computers that will be connected but within the router's DHCP address assignment range. Consult the router's documentation for that information. Consult the printer manual for how to assign an IP address to the printer. When you install the printer driver and/or Add the printer you will add it as an IP printer or LPR printer and use the IP address you assigned to the printer.

Can I replace hard drive with Time Machine backup?

I couldn't phrase this right to see if some already asked. I have MacBook with a 250gb HDD and I have a new 500gb HDD. I bought a USB Hard Drive enclosure and have been backing up with Time Machine. So my question is, can I take out my 250gb HDD and put in my Time Machine Backed Up 500gb, and boot up like normal? Or are there some steps I need to do?

No, you cannot do what you've asked.
What you can do is this.
1) using your install DVDs or an install USB, install OSX on the external 500GB drive. When setup assistant starts, point it to your 250GB drive so all your settings and files get migrated over.
2) now you can swap drives and it should work. Have your install USB handy incase something goes wrong. Put the 250GB drive in your external enclosure so you can access it if needed for a reinstall.
good luck

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

How does this work with multiple systems backing up with time machine

I was wondering as Apple states that this will do multiple time machine backups as in multiple computers, how does this do this? I am assumng that it will require me to partition the srive in the unit as multiple partitions. 1 for each time computer with time machine running.

I'm sorry, I'm not quite sure how to interpret your answer so I'll ask for clarification.
Do you mean that the backup belonging to each user will be protected by filesystem perms? In other words Alice's backup will be owned by Alice and only readable by her, ditto for the hyperthetical Bill?
I guess in other words, does Time Machine preserve file ownership perms?

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Time Capsule Not Working With Time Machine

I'm trying to backup to my Time Capsule, which I haven't used in over two years. It had been displaced because of a change in internet service providers. The new provider came in with a Linksys router, setup a sub-network, and left the Time Capsule/Airport out of the mix.
So I want to return to using my Time Capsule and have since pulled out the Linksys router, and got the Airport functionality working with the existing, primary network. In other words, the Time Capsule/Airport is working to extend the range of the network.
Problem is this: I cannot backup to the Time Capsule. Even if I'm connecting to the Time Capsule via ethernet, I cannot get it past the 'preparing' phase when running Time Machine. It stays at the phase for what seems to me an inordinate amount of time (30-45 minutes). If I go into System Preferences, the Time Capsule disk doesn't make itself available when using it with Time Machine. If I choose to go into the Star Wars display of Time Machine, I can sort of see the various backups, but I can't roll back to them, and the backup indicator on the right looks sort of ghosted, like it's there but it's not there.
How do I know if the disk within the Time Capsule is failing? Could that be what's going on? How would I test it? I get a green light on the front of the TC, but not everything is hunky dory since I'm not able to backup.
Is part of my problem that I'm using a not up-to-date version of Airport Utility? –I'm using 5.4.2

Oh and here it is, on this page, Section D, #1:
"Section D. OTHER PROBLEMS RUNNING BACKUPS
D1. Stuck in "Calculating changes" or "Preparing""
and then the Apple supporting doc, as well:
http://support.apple.com/kb/TS1516
Fabulous. Thank you.

0CS_Item with time-dependent hierarchy

Dear Experts,
we are discussing pros and cons for a time-dependent item catalog (characteristic 0CS_item with time dependent hierarchy in BW) within consolidation SEM BCS 4.0. Does anybody has experiences on this topic?
I am quite sure it will be a performance issue and it means additional reporting effort (e.g. using reference period/year in the report comparing different hierarchies).
I am not sure if there are any other risks so I it would be great if anybody has some hints.
Thanks in advance,
Birgit Laux
Message was edited by: Birgit Laux

Birgit,
Some other things to consider:
- frequency of changes to item hierarchy. Could lead to a lot of item hierarchies in BW over time.
- hierarchy validity date does not seem to be displayed when running web queries and thus makes it difficult for the user to select the correct hierarchy when executing the query. Still looking for a fix for this.
- greater complexity in overall design. Is it really necessary to achieve correct financial statement presentation?
Virtual cube performance is not great but you could implement the data mart which provides typical BW query performance.
I stayed away from setting the item as time dependent for these reasons.
Brian

Can we share our photos in the family on different mac´s with Time Capsule?

Can we share our photos in the family on different mac´s with Time Capsule?

It depends on the size and number of photos you are sharing around.
Nothing wrong with putting a copy of the photos on the TC if that works for you. Each person can access the photo just fine like that.
I am not saying don't.. just beware of the risks so do it prudently..
But if the library is too large, you will steal space on the TC that should be used for backups.. if all the computers in the network are backing up to it, don't use too much of the spare space.
Better to buy a firewire drive (or USB but firewire 800 are much faster) and connect it to a computer that is regularly turned on. Share that drive to the network. It will then also be backed up correctly to the TC although again be careful of the amount of files, and still keep a straight copy backup somewhere else.
I am recent convert so workflow on the Mac is not my forte.. so perhaps some of the wiser heads can also drop in and post a reply.

I have a EOS T1i and would like to experiment with time lapse photography. Any help?

I have an EOS T1i and would like to experiment with time lapse photography. I just read an Apple tip for the iPad and it is easy to do with the iPad but timing is something else. I would like to do it with my Canon and be able to change the timing between shots. Can you provide advice? I put time lapse into Google and it had an attachment for the T3i that I could get from Amazon. I don't know if it fit my T1i and don't know where to put it. Any advice would be helpful. I tried to do a search on this forum but could not find the answer.
Bob
Solved!
Go to Solution.

The Google search: https://www.google.com/search?q=EOS+T1i&oq=EOS+T1i&aqs=chrome..69i57j69i60l2&sourceid=chrome&es_sm=1...
The first hit: http://www.superstokedmagazine.com/article/2013/09/how-to-do-a-time-lapse-with-a-canon-eos-rebel-t1i...

Can I use any external hard drive with Time Machine?

I have a 1TB external hard drive and also a 16GB flash drive. Is it possible to use either of these with Time Machine?

IMO Time Machine should be on its own Dedicated External Drive... one that is twice the size of the drive that it is backing up... the 16 GB Flash Drive is not appropiate for the task.
See Here
TM 101
http://support.apple.com/kb/HT1427
You may also find this Link of Interest...
Time Machine vs. Clones and Archives

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

How can I set up an external harddrive with time machine that already has data on it without losing the data?

I have an external hard drive that I use to hold photos and other files on that no longer fit on my macbook. I also use the external hard drive for back ups set up with time machine. I don't believe I ever did anything to partition it, I've just always had separate folders (Photos, Music, etc) with one being called "Back Ups" (or Backups.backupdb) that my time machine back ups would automatically go into. Recently, I made the switch from my HDD in my macbook to a new SSD of the same size. I used the back ups on the external hard drive to restore all my content, which all worked out fine. My problem now is in using my external hard drive. When I plug it in, it no longer seems to be working with time machine. Also, I was organizing some files within the external hard drive, and when I dragged one into a folder, it took a while to load. Before, it was instantaneous moving a file already on the external hard drive to another location within it. Can anyone help me in getting the external hard drive to work with my new SSD? I don't want to delete any of the folders or back ups that are already on it, since that's the only place I have some of those files. Please let me know if you need anymore details. Thanks! (sorry if this is posted in the wrong forum)

First, she has to be logged in to the same iTunes account as she used on the old computer.
Second, when she plugs the iPhone in to iTunes, right click on the phone name and select transfer purchases.
Third, enter one contact and one calendar entry into the new computer's addressbook/calendar.
After that, she should be fine.

CATS with time approvals

Similar Messages

Maybe you are looking for