Cause: Error within the lock operation ( Local Table Overflow)

Experts
W observed, Incidentally when user tries to peform some business transaction, suddently the Lock table get fills up with and all other users  get "System Lock error"
either we log off user and after some time when user tried to perform same transaction.
the system and as well lock entries of that user is normal.
Why incidentally incidentally it is happening. We checked with user and they confirms they were doing normally nothing really change compare to their day to day activities.
Rgds

Hi,
Check Enqueue Statistics from sm12 is there are any Enqueue errors in your system. It will also show you the current status of the table. Since how long you getting this problem .. if its recent i suggest see if there is any big activity going on your system which is temperary ... if yes then see if this problem disappers after activity ..
You can do a dignosis check in sm12 too .. se if this contains any error.
Or if you want to have a permenant solution then enque/table_size increase this parameter from rz10 and restart your system.
Shailesh
Edited by: Shailesh Mamidwar on Jun 25, 2009 11:47 AM

Similar Messages

  • Transaction errors: The lock operation ended unsuccessfully because of deadlock.

    Hi,
    One of our process is getting "Transaction errors: The lock operation ended unsuccessfully because of deadlock." error while processing Partitions in AS 2005.
    We have a process that processes dimensions and partitions based on a SQL table.  Sometimes when the it is processing two partitions at the same time (multi-threaded) for same measure group, server throws deadlock error.    This does not happen all the time.
    Both partitions are bound to different tables in relational database and I also traced the SQL Server and did not get any deadlock error.
    I searched for this error on Google and did not find anything.
    Anyone have any idea about this error?
    Thanks

    Hi All,
    when i  execute the job for cube refreshment,sometimes it is executing successfully,but sometimes it is getting failed with below error  
    Started:  4:08:08 AM  Error: 2015-01-14 04:55:21.03     Code: 0xC11D0005     Source: Analysis Services Processing Task Analysis Services Execute DDL Task     Description: Transaction errors: The lock operation
    ended unsuccessfully because of deadlock.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  4:08:08 AM  Finished: 4:55:21 AM  Elapsed:  2832.18 seconds.  The package execution failed.  The
    step failed.
    If any find the solution please post on it.
    Thanks
    Rambabu

  • Create process error 740 the requested operation requires elevation

    Hi Friends,
    I'm trying to launch Virtual KeyBoard from my application. I'm using jdk1.6.0_02. (I also tried on jdk1.3 , which throws same exception as of jdk1.6.0_02)
    try{
                Runtime.getRuntime().exec("C:\\Windows\\system32\\osk.exe");
            catch(IOException ex){
                System.out.println(ex.getMessage());This works fine on Windows XP , but on Windows Vista it throws exception :
    Can not run Program "C:\Windows\System32\osk.exe" :create process error 740 the requested operation requires elevation
    It works on Vista if I turn off user Account control from User Account in ControlPanel.
    While If I try to launch (Calculator)Calc.exe instead of (Virtual KeyBoard)osk.exe then it launch successfully without turning off User Account Control.
    Does any one has an idea how can I launch Virtual Keyboard ("osk.exe") without turning off user Account Control on Windows Vista.
    I'll appreciate any help regarding this topic.
    Thanks.

    Thanks for your promt reply.
    The llink you write is not launching the page.
    My question is why it launching Calculator without any privillage, while it has problem in launching Visual KeyBoard.
    Thanks

  • Document store access caused errors in the SAP Correction System

    Hi Gurus,
    I have this user who is trying to make changes to a workbook in DEV which is published to a folder with some users who are assigned to role. This user is the only user with Developer 2 role. When the user make changes and try to save the workbook to her role or favorites so that the changes are transported to BWP, the user is getting "Document store access caused errors in the SAP Correction System".
    Do we have any suggestions/solutions, I would really appreciate any help on this.I would also assign full points for the most helpful answer.

    I have exactly the same problem with the user who is trying to save the workbook, where he made minor change.
    Any clues?
    Thank you.
    Vitaliy

  • How to check the locks in a table

    Hi
    Can any one tell me the commands to check the locks and get rid of the locks in a table.
    Thanks and Reg
    Debashis

    v$lock
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm#sthref764

  • Communication error with the opmn server local port

    Working on 64-bit R12.0.6 on AIX 5L
    Application services are not being started properly. They are being started with status 2(sometimes with 4).
    Autocinfig is being successfully completed.
    Please help me how I can get rid of this error. Following are some of the environment setting details:
    ons.conf
    nodes=appaix02.us.oracle.com:15007
    opmn.xml
    <opmn xmlns="http://www.oracle.com/ias-instance">
    <notification-server>
    <port local="15006" remote="15007" request="15005"/>
    opmn.log
    OPMN worker process exited with status 4. Restarting
    OPMN worker process exited with status 4. Restarting
    OPMN worker process exited with status 4. Restarting
    OPMN worker process exited with status 4. Restarting
    OPMN worker process exited with status 4. Restarting
    OPMN worker process exited with status 4. Restarting
    ons.log
    07/01/11 13:12:02 [4] ONS server initiated
    07/01/11 13:12:52 [4] Logging disabled
    07/01/11 13:12:53 [4] ONS server initiated
    07/01/11 13:13:04 [4] Logging disabled
    07/01/11 13:13:04 [4] ONS server initiated
    07/01/11 13:13:17 [4] Logging disabled
    07/01/11 13:13:28 [4] ONS server initiated
    07/01/11 13:13:40 [4] Logging disabled
    07/01/11 13:13:41 [4] ONS server initiated
    07/01/11 13:14:20 [4] Logging disabled
    07/01/11 13:14:21 [4] ONS server initiated
    07/01/11 13:14:29 [4] Logging disabled
    07/01/11 13:14:29 [4] ONS server initiated
    07/01/11 13:14:34 [4] Logging disabled
    07/01/11 13:14:34 [4] ONS server initiated
    07/01/11 13:15:53 [4] Logging disabled
    adopmnctl.txt
    10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
    10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
    he managed processes
    opmnctl: stopping opmn and all managed processes...
    10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
    10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
    opmnctl: opmn start failed.
    10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
    adformsctl.txt
    opmnctl: stopping opmn managed processes...
    10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
    10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    Communication error with the OPMN server local port.
    Check the OPMN log files
    opmnctl: opmn start failed.
    Please help.

    "A point to add"
    I just noticed that following message is being continously receiving in the database alert_log:
    Sat Oct 9 16:04:52 2010
    WARNING: inbound connection timed out (ORA-3136)
    Sat Oct 9 16:05:32 2010
    WARNING: inbound connection timed out (ORA-3136)
    Sat Oct 9 16:06:30 2010
    WARNING: inbound connection timed out (ORA-3136)
    Sat Oct 9 16:07:10 2010
    WARNING: inbound connection timed out (ORA-3136)
    Sat Oct 9 16:09:35 2010
    Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
    Sat Oct 9 16:11:52 2010
    WARNING: inbound connection timed out (ORA-3136)
    Sat Oct 9 16:29:40 2010
    Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
    ~
    Please help.

  • POR which contains rejection from vendor causes errors in the EBP

    Hi @all,
    are there a solution within SRM 5.0 & EBP 3.5 that PORs that containing rejections from the vendor regarding a PO doesn't run into errors within the EBP. Thats not covered by the POR workflows as far as I know.
    Probably someone knows more...
    Thanks for a reply.
    Stefan

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • PS CS5 error message, "The requested operation cannot be performed..."

    When trying to save an image under the "save for web & devices" I get this error message, "The requested operation cannot be performed on a file with a user-mapped section open." I have the latest driver on my computer. For a while I would get this message now and then, now it is all the time.

    I have this problem too. It only affects Photoshop. It doesn't happen every time I try to save for web, but it happens on all kinds of files, even new files that I have created from scratch in Photoshop. Sometimes, all I have to do is create a new file and click save for web, and I get the error.
    It doesn't happen if I turn off my Antivirus program - Trend Micro Titanium Maximum Security.
    So I would think it was a problem with Trend Micro, but it doesn't occur with any other program and I can save files with Photoshop, unless I use the Save For Web option.

  • Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

    Has anyone ever managed to solve this one?
    We have a problem on Windows 7 SP1 32bit systems.
    when we try to start the Check Point VPN-1 Securemote service we get this message:
    Error 1075: The dependency service does not exist or has been marked for deletion
    When we install a clean Windows 7 from an ISO the checkpoint client without any issues
    when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
    the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
    which is supported for Win7 x86
    other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
    we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
    We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
    it seems like the configuration is the same but we can't seem to find any online solution about this issue
    any suggestions?
    thanks
    Tamir Levy
    Tamir Levy

    Hi,
    Please check if all the dependencies services are running, if not, please start them:
    DNS Server
    Remote Procedure Call (RPC)
    Netlogon
    Server
    Workstation
    Any error message, please post back.
    You can also check solution in this article:
    http://support.microsoft.com/kb/269375
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Error message: "The share operation Apple Devices 1080p has failed"

    Hey,
    I have a MacBook Air, OS X version 10.9.3, running Mavericks, with 1.7 GHz and 8 GB memory. I'm running FCPX 10.0.8.
    I've had no problems rendering and exporting all sorts of movies and short clips over the last few months, however every time I try to export my last clip, this message shows up after the clip is 10% done exporting: "The share operation Apple Devices 1080p has failed   QuickTime Error: - 50"
    I've already clicked on "prevent app nap" under Get Info for FCPX.
    Does anyone have any idea what's going on, or can offer a solution to this?
    Thanks so much!
    Terra

    Since you have already checked the Prevent App Nap box I assume you have seen this thread: https://discussions.apple.com/message/21920134#21920134
    Seems likely to me that either one of the files in your timeline is giving you trouble or a render in your timeline is giving you trouble. I sometimes randomly run in to export errors with transitions or titles. Sometimes removing the effect/title from the timeline, deleting the render files or copying and pasting the timeline in to a new project can fix it.

  • Loading external swf, how to deal with errors within the loaded swf?

    I have a Flex app that basically lets you browse a bunch of thumbnails that represent swf files, when you click a thumbnail it opens a window that loads the actual swf into an image control. The problem I have is that these swfs can be uploaded by our clients, so they may have actionscript errors being thrown, etc. We can't really predict what they may do. Is there a way I can load these swf in such a way as to ignore any errors that the loaded swf may generate within itself.
    For example, one such swf reads some text from a text file to display, but when they are viewing it in this manner the file isn't there so a stream error is generated. My parent Flex app doesn't care about this error and I don't want to see it thrown up in an actionscript error box (I have debug verison loaded on my PC obviously) or interfere with the parent app in any way.
    Would application domains help at all? Would it make a difference if I loaded the swf into a separate domain? Or is there some way I can generically trap any error coming from the loaded swf and just ignore them?
    Any help appreciated.
    Thanks,
    Marcus

    There is no way to catch errors thrown at random times.  Remember that most folks have the release player which does not show error dialogs.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

  • Is there an error within the ims_dssetup.pl

    Is there an error with the ims_dssetup.pl script for Windows 2000 for IMS5.2. I've tried to run the one that comes with the package but I always get an error.
    If there is an error can some on point me in the write direction to find the correct script. I'm building it on a test platform and it would be great to have it working.
    Thanks

    Yes, there are several errors with that ims_dssetup.pl. Check the release notes on p1, you will see that.
    5.2p2 is due to be on the public website next week. Please do download that, and use the dssetup that comes there. (the one from p1 should work, for setting up, but you will want p1 anyway).

  • PSE11 stops working and is causing errors in the Reliablity Report Windows 8

    I keep getting this error code can anyone assist me? I have had several calls into Adobe and the last person said if it is working disregard the error. I get that but it is effecting my performance. I have uninstalled twice and reinstalled it twice as well and the error continues. Please assist me once tech told me to install Quicktime and that did not help either it is a bit frustrating.
    Source
    Elements 11 Organizer
    Summary
    Stopped working
    Date
    4/11/2013 12:07 PM
    Status
    Report sent
    Description
    Faulting Application Path:              C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
    Problem signature
    Problem Event Name:      APPCRASH
    Application Name:           PhotoshopElementsOrganizer.exe
    Application Version:         11.0.0.0
    Application Timestamp:   503fdd1d
    Fault Module Name:        QtCore4.dll
    Fault Module Version:      4.8.1.0
    Fault Module Timestamp:                503fbfa6
    Exception Code:                c0000005
    Exception Offset:              00050b14
    OS Version:        6.2.9200.2.0.0.768.101
    Locale ID:           1033
    Additional Information 1:                111e
    Additional Information 2:                111ef96ebf8a0fead9be2dd0c19dacd2
    Additional Information 3:                7942
    Additional Information 4:                7942f7a164f0a42120fbf45dde61b5dd
    Extra information about the problem
    Bucket ID:          3b07f926dcb86fc12af834aa3e6aa10e (-1150612356)

    Start PSE to get to the Welcome screen.
    Hold down the Ctrl + Shift keys and click Organizer. Keep holding down the keys until you see the Catalog window.
    Select your catalog and click Repair.  Select “repair anyway” even if PSE doesn’t find problems.
    Then for good measure, click Optimize.
    If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog.  If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
    Check for Task Manager and end the "ElementsAutoAnalyzer.exe" file and then try.
    - Try launching Organizer directly from the exe with Admin rights.
    Some more solutions once you try these are here http://forums.adobe.com/message/4994459#4994459
    Thanks,
    Garry

  • Navigation error within the WD LeaveRequest

    Hi everybody,
    We are using an ECC6.0 / EP 7.0.
    When I create a LeaveRequest using the LeaveRequest webdynpro, I execute a 3 steps guided procedure:
    1. Display and Edit
    2. Review and Send
    3. Completed
    At the 3rd step, the following links appear:
    <b>What do you want to do next?</b>
    Request Another Absence
    Go to homepage
    When I click on the link "Request Another Absence", the following error raises:
    500   Internal Server Error
      Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.pcuigp.xssfpm.wd.Navigation.navigate(Navigation.java:168)
        at com.sap.pcuigp.xssfpm.wd.wdp.InternalNavigation.navigate(InternalNavigation.java:124)
        at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.navigate(FPMComponent.java:990)
        at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.navigate(FPMComponent.java:973)
        at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.navigate(FPMComponent.java:1130)
        ... 33 more
    Is there anybody who knows how to solve this error?
    Thanks and regards,
    Mathieu

    The solution:
    Use the Page and iView LeaveRequest delivered for ECC6 and not the ones delivered for ECC5.
    Regards,
    Mathieu

  • Bica: change the query cause error in the pas model

    Dear  friends,
    We have very simple scenario: one query 'SSM_SQL_KPI_MAY'' for feeding  the pas model- 2 demensions and 2 measures. With this query I load the schema and data to the pas model.Everithing was fine. After that we added new  dimension to the query.Ichanged the  existing query and load the data with bica.But when I try to open the model I get the next  error every time
    DAT316:
    No internal Dimenson unique name to position cache exists for 'EZOR_KEY' on Linkid 'BI' Cube 'SSMKPI/SSM_SQL_KPI_MAY'
    We try to resolve the issue by deleting data and schema but every time I get the same error.
    How is it possible to resolve this issue?
    What is a best practice in the case of changing queries working with bica?
    Thanks.
    Best regards,Orit.

    Dear Orit,
    Keep in mind that dimensions provided by a BICA query connection must have a HIERARCHY associated to the base characteristic in BW. PAS uses this hierarchy to define the "Result" (rollup) levels of the dimension. Check your BW query and verifiy that all the included dimensions have associated hierarchies in use. I'm guessing this is the issue with your new dimension.
    You can also check the dimensions in PAS by selecting your model, then "Dimensions" and right-clicking on the affected dimension name and then the "View" option (or "List" or something related to displaying the dimension definition). You should see a PAS script that describes the dimension, including the dimension member IDs, descriptions and rollup levels. This should be consistent with your query results and hierarchies).
    Also, from the same menú you may also choose to "Delete" a dimension.
    Good luck!
    Regards

Maybe you are looking for