CBS BUILD FAILD-- EPBUILDT

Hi,
I have a problem with CBS Build,
When i create WDJ App in As a local App i dont get issues i mean every thing working fine
When i try to create WDJ App thr NWDI it is getting me problem due to EP_BUILDT
I try to Add the EP_BUILDT in Required SC in my track i dont find EP_BUILDT SC in SC's list, now i have download the EPBUILDT09_0-10003786.SCA file from S&M and i have deployed it thr SDM and restarted my SAP servers but still i dont see any EP_BUILDT file in SC list even in SLD.
Please suggest me what to for above issue.
Thanks,
Sreeni.

Hi,
I solved my problem with reference of
Re: Broken DCs after changing the runtime systems in track
Thanks,
Sreeni.

Similar Messages

  • Help: NWDI 7.2 CBS build problem - initialize compartment-broken DCs

    Hi all.
    I am facing a problem with CBS build due to broken DCs - invalid dependencies. I have read all the articles and notse related to this issue, but cannot not solve is. Has anyone faced this issue or know a solution?
    The problem:
    In one SC I have a DC A, which used to have public part PP_A.
    In another SC I have a DC B, which used to depend on public part PP_A of DC A.
    As part of implementation, the PP_A in DC A was deleted and replaced by new public parts. The changes are checked in and activated in NWDI successfully.
    Next, the DC B was corrected, its reference to PP_A was deleted and replaced with appropriate replacements.
    I checked in the activity correcting the DC B. Activation fails, because CBS complains that DC B has invalid dependency. I assume that the CBS cache still holds the old sources.
    I took the compartment where DC B is located and triggered a CBS Reinitialize compartment (which should discard the cached sources and load a fresh copy). The CBS Reinitialize compartment request fails too! The log shows the same message as the build log: invalid dependency.
    It seems that during reinitialize, CBS checks the validity of the DCs in the compartment BEFORE it does clean its cache and refreshes from DTR.
    In DTR, I can see the sources of DC A and DC B checked in correctly in the inactive branch, the .dcdef in DC B contains correct references to new public parts of DC A.
    Does anyone know how to force CBS to refresh its sources from DTR where correct sources are checked in?
    Thanks.
    Edited by: Rastislav Cesnek on Dec 20, 2011 3:25 PM

    Right.
    Its not the CONS, it's the active from DEV which is used. I sort of don't understand the NWDI concept then, maybe SAP could learn a little from Hudson, CruiseControl you name it.
    Apparently, as I found out after some trial and error, the checks done before the build AND before the initialize compartment run on sources from ACTIVE branch. So the check-ed in fixed sources of the DC B are ignored by CBS. It then complains about the invalid dependencies all the time.
    Finally, although it looks very scary, I activated the soure code changes of the dependent components (I hade a lot of them, not just one) with the "Activate even if the build fails". Then the initialize compartment did not complain about BROKEN components because of dependencies, because the check of metadata succeeded and the components were rebuilt.
    Thanks for hints.

  • CBS build error

    Hi all,
    When I am trying to check-in my application, I am getting the following error. Can any one of you give me the reason for it?
    Activation Failed:CBS Build Error: CBS Failed to communicate with some other server(internal code: COMMUNICATION_ERROR)
    Thank You.
    Regards,
    Murthy.

    Hi,
    Try pinging the JDI server from the NWDS and ensure that you get response from all the components (DTR, CMS, SLD etc).
    Even if response from one component fails, then check whether the JDI server is up and running.
    Hope this helps !
    Regards
    Srinivasan T

  • CBS Build Error DynamicRFCModelClass

    Hi,
    I have a case where my local build and deployment goes fine, but the CBS Build fails with the following error.
    com.sap.tools.webdynpro.bytecode.ClassFileNotFoundException: class 'com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass' not found via com.sap.tools.webdynpro.bytecode.util.URLClassFileLoader$MyURLClassLoader@10cc250f
    What could be the reasons for this to happen ?

    Hi,
    Try pinging the JDI server from the NWDS and ensure that you get response from all the components (DTR, CMS, SLD etc).
    Even if response from one component fails, then check whether the JDI server is up and running.
    Hope this helps !
    Regards
    Srinivasan T

  • EJB CBS Build Error: No folder found for attribute meta-inf

    I'm trying to activate my EJB DC that works properly when built and executed/deployed in the portal.
    But in CBS it fails to build and we got the following error trace:
    This is the error trace:
      [pppacker] Packing public part 'client'
      [pppacker] ERROR: Failed to pack public part: No folder found for attribute meta-inf
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPackTask._execute(PPPackTask.java:295)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.techdev.ant.util.BPTask.execute(BPTask.java:20)
      [pppacker] ERROR:       at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
      [pppacker] ERROR:       at org.apache.tools.ant.Task.perform(Task.java:364)
      [pppacker] ERROR:       at org.apache.tools.ant.Target.execute(Target.java:341)
      [pppacker] ERROR:       at org.apache.tools.ant.Target.performTasks(Target.java:369)
      [pppacker] ERROR:       at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
    [pppacker] ERROR: Caused by: com.sap.tc.buildplugin.pp.PackException: No folder found for attribute meta-inf
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.entity.EHEjbClientJar.findSpecialFolderContaining(EHEjbClientJar.java:126)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.entity.EHEjbClientJar.determineFileList(EHEjbClientJar.java:64)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packEntity(PPPacker.java:697)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packPublicPartContent(PPPacker.java:585)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packPublicPart(PPPacker.java:532)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.pack(PPPacker.java:460)
      [pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPackTask._execute(PPPackTask.java:293)
      [pppacker] ERROR:       ... 29 more
    Ant runtime 0.032 seconds
    Ant build finished with ERRORS
    Failed to pack public part: No folder found for attribute meta-inf
    I'm not sure if this means anything:
    Preparing data context..
    No public part descriptor found for component "ejb20" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "jdbc20" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "jms" (vendor "sap.com"), public part "default", using legacy mode.
    No 'default' JDK defined, will use running VM.
    Data context preparation finished in 0.017 seconds
    How do I resolve this issue?
    Thank you in advance.

    TRY TO DO ITSELF.

  • Long running cbs build

    hi SDNer,
    my environment is CE7.2 SP2.
    nwdi is configured using wizard, the track is created via template.
    initially the bpm dc is not able to be built on server side. i applied notes 1412368.
    after that, it still can not be built , it throws outofmemory error.
    i changed some properties of the CBS service.
    BUILD_TOOL_VM_ARGS   -Xmx1000M    -
    > -Xmx3000M
    seems no effect. do I have to restart the server?
    for one activity, there was only one bpm dc, i force the activation even the build with error, luckily, this activity got activated, although it took 24 hours for the build.
    now i have another activity which contains 7 bpm dc, i force the activation again, the building process has been running for almost 48 hours, still no result.
    what could be the reason?
    any notes should i apply for bpm dc in nwdi scenario?
    Best regards,
    John

    Of course you have to restart the server after you changed the JDK parameters.
    Did you read the guide carefully?
    Before you can built it you check the SCAs in the NWDI repository directory.
    I  think you have not confiured DI successfully.
    Check this:
        4.      Choose Dispatcher ® Services ® HTTP Provider ® Properties.
           5.      From the parameter list, select MaxRequestContentLength.
           6.      Under Value, enter the new parameter value.
    As a rule of thumb, set the value to 1GB (1048576 KB).
    Go to Server ® Services ® Component Build Service.
           5.      Choose tab strip Properties.
    Make sure that the key idleStart is set to the value false, because otherwise the CBS will not process the incoming requests
    If there are no SCAs in the SAP directory /usr/sap/trans/EPS/in.
    The SCAs can not be copied to the NWDI repository automatically.
    Edited by: Shen Peng on May 12, 2011 3:35 AM

  • CBS Build is failing...

    I have developed one web dnpro application..At the time of check in NWDS asked to activate my activity.I have done that but in CBS my build is failed..Can anybody help me on the same.
    In Activate logs it is showing that
    Aug 22, 2010 2:16:41 AM  ...tc.buildcontroller.CBSBuildController [    Info]: 
    com.sap.tc.buildcontroller.BuildControllerException: Invalid syntax of passed build properties C:\j2sdk1.4.2_17-x64
         at com.sap.tc.buildcontroller.CBSBuildController.createBuildSettings(CBSBuildController.java:606)
         at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:526)
         at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:452)
         at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:324)
         at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:262)
         at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:217)
         at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:178)
    I have also checked my CBS configuartion in Visual Administrator and everything looks fine..
    BUILD_TOOL_JDK_HOME - C:\j2sdk1.4.2_17-x64
    JDK_HOME_PATHS - C:\j2sdk1.4.2_17-x64
    Please help...
    Regards
    Arjun

    Hi,
    For future search here some additional infos:
    See the note:
    #1402901 - Java Build VM Settings on CBS
    BUILD_TOOL_JDK_HOME = <path to highest JDK>
    JDK_HOME_PATHS = JDK1.3.1_HOME=<path of jdk131>;JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>JDK1.6.0_HOME=<path of jdk160>;default=<path of the JDK as default>
    Some simple rules with examples:
    - for BUILD_TOOL_JDK_HOME you simply enter the path to your JDK, e.g.: /opt/IBMJava2-amd64-142
    - for JDK_HOME_PATHS you have to follow the scheme "key=value" e.g.: JDK_1.4.2_HOME=/opt/IBMJava2-amd64-142
    - for BUILD_TOOL_JDK_HOME you always specify the highest JDK,
    - for JDK_HOME_PATHS you list the available JDKs.
    - JRE is not allowed, specify always JDK!
    Cheers,
    Ervin (http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29Home)

  • Cbs build portal application dc fail.  Build Plugin IS NOT DEFINED for this

    hi all
    I use NW7.0 ehp1,have portal and a nwdi.
    I create a track at nwdi . and develop a portal application .
    local build is ok . but when i check in .run a activitce.  dc is broken.
    log is -
    CBS Request Log - [  300/DEP_PESKM_D  ]
    Build number assigned: 314
    Change request state from QUEUED to PROCESSING
    REQUEST PROCESSING started at 2010-11-05 02:17:38.921 GMT
        ACTIVATION request in Build Space "DEP_PESKM_D" at Node ID: 13,975,650
         [id: 300; parentID: 0; type: 4]
         [options: NO OPTIONS]
        Waiting for access: 79 ms
        ===== Pre-Processing =====  started at 2010-11-05 02:17:39.000 GMT
            List of requested for activation activities:
                'deep.com_PESKM_1' compartment
                    tet
                        [ISN 111][created by YANLIANG at 2010-11-05 10:17:31.0][OID 6b2f604ae87c11df94ff000000d54062]
                There is 1 activity in compartment deep.com_PESKM_1
                1 activity will be processed by this request
            Analyze dependencies to predecessor activities... started at 2010-11-05 02:17:39.031 GMT
                Analyzing predecessors in compartment "deep.com_PESKM_1"
                    No dependencies to predecessor activities found.
            Analyze dependencies to predecessor activities... finished at 2010-11-05 02:17:39.046 GMT and took 15 ms
            Analyze versions... started at 2010-11-05 02:17:39.046 GMT
                List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2010-11-05 02:17:41.812 GMT and took 2 s 766 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] started at 2010-11-05 02:17:41.812 GMT
                    Verification of DL [ws/PESKM/deep.com_PESKM/dev/active/] finished at 2010-11-05 02:17:41.906 GMT and took 0 ms
                    Verification of cache (level 2: Comparison of attributes) finished at 2010-11-05 02:17:41.937 GMT and took 31 ms
                Synchronize metadata for [deep.com.cn/dc_logo_par] finished at 2010-11-05 02:17:41.937 GMT and took 125 ms
                < CHANGE > 'deep.com.cn/dc_logo_par' DC
            Analyze versions... finished at 2010-11-05 02:17:41.937 GMT and took 2 s 891 ms
            Analyze activities... started at 2010-11-05 02:17:41.937 GMT
                Loading component definitions
                1 component to be build in compartment "deep.com_PESKM_1"
            Analyze activities... finished at 2010-11-05 02:17:42.000 GMT and took 63 ms
            Calculate all combinations of components and variants to be built...
            Analyze request DC BV... started at 2010-11-05 02:17:42.109 GMT
                    'deep.com.cn/dc_logo_par' variant 'default'
                    'deep.com.cn/dc_logo_par' variant 'default' cannot be built. ACTIVATION will fail.
                    Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
            Analyze request DC BV... finished at 2010-11-05 02:17:42.140 GMT and took 31 ms
        ===== Pre-Processing =====  finished at 2010-11-05 02:17:42.187 GMT and took 3 s 187 ms
        Change request state from PROCESSING to FAILED
        Error! The following problem(s) occurred  during request processing:
        Error! The following error occurred during request processing:Activation failed due to component "deep.com.cn/dc_logo_par" variant "default". The component is BROKEN.
    REQUEST PROCESSING finished at 2010-11-05 02:17:42.187 GMT and took 3 s 266 ms
    No build logs available for the request.
    Edited by: yan liang on Nov 5, 2010 3:12 AM

    Hi Yan,
    please check the NWDI troubleshooting guide:
    http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CBS%29Q0030
    --> Understanding Broken and Dirty DCs
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
    Did you import the dependent build plugins for the track in question?
    (tab "development" in the /devinf --> CMS webui --> Transport studio)
    See also the sap note: #1080927 - Creating CMS Tracks for Common Application Types (http://service.sap.com/sap/support/notes/1080927)
    Best Regards,
    Ervin

  • Build Faild Error

    I am not able to buid my project and it gives bellow error.Please give me suggession to resolve this error.
    Error: [dcmake] ERROR: Could not set up build infratsructure path list: Used public part 'def' of 'sap.com/tc/bi/extcm(sap.com_SAP_BUILDT_1)'not available
    [dcmake] Build failed with errors.
    Thanks,
    Archana

    Dear Archana,
    Please refer to the SAP Note 1080927 - Creating CMS Tracks for Common Application Types if required SC is not added to the track for the webdynpro development.
    For webdynpro development, following SC should be added in the track data :
    WebDynpro Application for NetWeaver 7.0
    sap.com/SAP_BUILDT/7.00   SAPBUILDT<SP>_<PATCH>-10003479.sca
    sap.com/SAP-JEE/7.00      SAPJEE<SP>_<PATCH>-10003469.sca
    sap.com/SAP_JTECHS/7.00   SAPJTECHS<SP>_<PATCH>-10003467.sca
    Hope it will helps
    Best Regards
    Arun Jaiswal

  • Issue with Dictionary CBS Build - CE 7.1

    Hi,
    We have NWDI setup on 2004s SP13 where we have created a track for CE 7.1 Development.
    We are facing issue with Dictionary Project Activation.Can anyone let me know how do we fix this :
    [ddgen] [Info]    Initialize generation templates from configuration jar:file:/usr/sap/aa/aa11/j2ee/cluster/server0/temp/CBS/5a/.B/1424/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/dictionary_generation_core_api.jar!/DictionaryGenerationConfigurationCompiled.xml
         [ddgen] [Info]    Using DocumentBuilder org.apache.xerces.jaxp.DocumentBuilderImpl
         [ddgen] [Info]    Generating of DbTtable //DtDictionary/DtDbTable:.TEST_TABLE aborted with exception
         [ddgen] [Info]    Catching throwable Open SQL services not initialized!
         [ddgen] [Info]    java.lang.IllegalStateException: Open SQL services not initialized!
         [ddgen]      at com.sap.sql.services.OpenSQLServices$1.invoke(OpenSQLServices.java:39)
         [ddgen]      at $Proxy2.isSQLKeyword(Unknown Source)
         [ddgen]      at com.sap.sql.services.OpenSQLServices.isSQLKeyword(OpenSQLServices.java:128)
         [ddgen]      at com.sap.dictionary.designtime.DtColumnChecker.reservedWordIsUsed(DtColumnChecker.java:153)
         [ddgen]      at com.sap.dictionary.designtime.DtColumnExpanded.columnIsOk(DtColumnExpanded.java:188)
    Thanks ,
    Uma

    Hi Uma
    I'm having the exact same problem. Did you manage to fix this?
    Thanks
    Stuart

  • NWDI CBS Build for Web Dynpro DCs

    Hi All,
    I have a requirement in which I need to edit a web dynpro DC and redeploy it. The DC to be edited also has some dependent DCs.All the DCs are managed using NWDI.
    Can you please let me know the steps that are involved in editing and rebuilding a DC, apart from importing it in NWDS ?
    Are there any additional steps that arer required for the dependent DCs?
    Thanks, in advance !
    Regards,
    Prasanna

    Hi ,
    I followed all the steps mentioned by you and my local build was successfull , However when I tried to check in my activity , It is throwing following error
    16:49:08.742  CHECKIN  (FAILED: Uploading file failed: AppProperties.xlf)  comp/wd2_01102008:12:46   (act_w_BROMA_bpcl_2e_com_BROMASC_dev_inactive_u_M3172_t_2008_10_01_07_16_38_GMT_1b4c680a-70dc-4683-951d-956590e5d449)
    16:49:08.742  CHECKIN  (FAILED: CHECKIN on activity act_w_BROMA_bpcl_2e_com_BROMASC_dev_inactive_u_M3172_t_2008_10_01_07_16_38_GMT_1b4c680a-70dc-4683-951d-956590e5d449 failed : Checking in activity failed: act_w_BROMA_bpcl_2e_com_BROMASC_dev_inactive_u_M3172_t_2008_10_01_07_16_38_GMT_1b4c680a-70dc-4683-951d-956590e5d449:operation failed)
    17:02:50.188  CHECKIN  (FAILED: Uploading file failed)  comp/wd2_01102008:12:46   (act_w_BROMA_bpcl_2e_com_BROMASC_dev_inactive_u_M3172_t_2008_10_01_07_16_38_GMT_1b4c680a-70dc-4683-951d-956590e5d449)
    Can u please guide ?

  • Release activitis are not build in CBS, sending an empty archive

    I have created an activity and released from the NWDS Development Configuration.
    Now from the consolidation i have imported .Assembled and moved this to test but my changes are not moved to the test system.
    Then i started to dig in to this issue and I found this log in consolidation CBS make details as below :
      Analyze dabendencies to predecessor activities... started at 2008-05-12 23:30:36.618 GMT
                Analyzing predecessors in compartment "xxxxx.com_abc_1"
             No dabendencies to predecessor activities found.
             Analyze dabendencies to predecessor activities... finished at 2008-05-12 23:30:36.700 GMT and took 82 ms
              Analyze versions... started at 2008-05-12 23:30:36.700 GMT
              List Active Versions Rabort: "HTTP/1.1 207 Multi-Status" finished at 2008-05-12 23:30:36.879 GMT and took 179 ms
                < IGNORE > 'xxxxx.com/ab/test' DC
                < IGNORE > 'xxxxx.com/ab/test1 DC
                < IGNORE > 'xxxxx.com/ab/test2' DC
                < IGNORE > 'xxxxx.com/ab/test3' DC
            Analyze versions... finished at 2008-05-1223:30:36.889 GMT and took 189 ms
             Analyze activities... started at 2008-05-1223:30:36.889 GMT
                Loading component definitions
                Removing component "xxxxx.com/ab/test1" from request 1297. A component with this name has not yet
                been created or activated.
                Removing component "xxxxx.com/ab/test2" from request 1297. A component with this name has not yet
                been created or activated.
                Removing component "xxxxx.com/ab/test3" from request 1297. A component with this name has not yet
                been created or activated.
                No components to be build in compartment " xxxxx.com_abc_1"
               Analyze activities... finished at 2008-05-12 23:30:36.917 GMT and took 28 ms
               Calculate all combinations of components and variants to be built...
               ===== Pre-Processing =====  finished at 2008-05-12 23:30:36
    Please help me , I am badly stuck here.
    Thanks in advnace.
    Peter

    We have the same issue and are currently troubleshooting. Here are some related threads I have found.
    Automatic Deployment in NWDI not working
    Re: SDM deploy not needed'
    CBS build not needed
    SAP Notes:
    793935
    Our NWDI is at a lower SPS level than our deploy-to systems. I hope that is not our issue...

  • Dictionary DC BUILD not working with CE 7.1 and 7.0 NWDI

    Hi All,
    we integrated our ce 7.1  in our existing NWDI environment. Everything works fine
    except for the dictionary dc build.
    The build process stops with an
    Open SQL services not initialized! (java.lang.IllegalStateException: Open SQL services not initialized!)
    error.
    I attached the CBS Build Log.
    Thanks for helping me!
    Best Regards
    Thomas
    CBS Build Log - [  JDEV_CE71_D/test.com_CETEST_1/default/  /test.com/test/tonddic  ]
      epikur     SAP Component Build Server  
    Development Component Build (2008-02-11 14:21:09)
      Component name: test/tonddic
      Component vendor: test.com
      SC compartment: test.com_CETEST_1
      Configuration: JDEV_CE71_D
      Location: JDEV_CE71_D
      Source code location: http://EPIKUR:50000/dtr/ws/CE71/test.com_CETEST/dev/active/DCs/test.com/test/tonddic/_comp/
      DC root folder: F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\
      DC type: Dictionary
    DC Model check:
       All used DCs are available locally
       validating dependency to build plugin "sap.com/tc/bi/bp/ddic"
       validating dependency to  public part "runtime" of DC "sap.com/tc/ddic/runtime/facade"
       DC model check OK
    Start build plugin:
       using build plugin: sap.com/tc/bi/bp/ddic
       starting build plugin from : F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\sap.com\tc\bi\bp\ddic\_comp\gen\default\public\ddic\
    Build Plugin 'DictionaryPlugin', Version 7.10 SP 4 (NW07_04_REL, built on 2007-11-19 18:29:27 +0100, CL12312)
       development component:  test/tonddic (test.com)
          software component:  CETEST (test.com)
                    location:  JDEV_CE71_D
                        type:  Dictionary
               build variant:  default
             source location:  SAPServiceSA2@localhost
             output location:  F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\gen\default
           generation folder:  F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\t\E566FFDB8ED53F0250EFBFF2B929A8A7
           plugin start time:  2008-02-11 14:21:10 GMT+01:00 (CET)
                     Java VM:  Java HotSpot(TM) Client VM, 1.5.0_14-b03 (Sun Microsystems Inc.)
    General options:
      convert *.xlf to *.properties: yes
      include sources for debugging: yes
    Checking path lengths for sources
    Path length checks finished in 0.015 seconds
    Preparing data context..
    No public part descriptor found for component "tc/ddic/runtime/facade" (vendor "sap.com"), public part "runtime", using legacy mode.
    Data context preparation finished in 0.25 seconds
    Creating Ant build file..
      Creating output file: F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\gen\default\logs\build.xml
      Using macro file:     F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\sap.com\tc\bi\bp\ddic\_comp\gen\default\public\ddic\macros\build.vm
    Build file creation finished in 0.407 seconds
    Starting Ant..
      Using build file:     F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\gen\default\logs\build.xml
      Using build target:   build
      Using Ant version:    1.6.4
    compile:
          [echo] Starting dictionary generator
         [ddgen]
         [ddgen] [Info]    Property deployment is true: Deployment information is provided!
         [ddgen] [Info]    Property sourcepath ...
         [ddgen] [Info]       F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\src\packages
         [ddgen] [Info]    Property targetpath: F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\t\E566FFDB8ED53F0250EFBFF2B929A8A7\gdd
         [ddgen] [Info]    Property archivename: test.comtesttonddic
         [ddgen] [Info]    Property vendor: test.com
         [ddgen] [Info]    Property dcname: test/tonddic
         [ddgen] [Info]    Property metadatapath: F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\t\E566FFDB8ED53F0250EFBFF2B929A8A7\gdd_metainf
         [ddgen] [Info]    Property generates2x is false: S2X files will not be generated
         [ddgen] [Info]    Property projectlanguage: de
         [ddgen] [Info]    Property language: Available languages are automatically determined
         [ddgen] [Info]    Property addpaths ...
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
         [ddgen] [Info]       dictionary.rtcontainer.facade.filter.jar - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
         [ddgen] [Info]       dictionary.runtime.facade.filter.jar - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
         [ddgen] [Info]       dictionary.services.facade.filter.jar - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
         [ddgen] [Info]       tcddicruntime~facade.jar - F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/ddic/runtime/facade/_comp/gen/default/public/runtime/lib/java
         [ddgen] [Info]    Optional property i18npath is empty
         [ddgen] [Info]    Initialize generation templates from configuration jar:file:/F:/usr/sap/SA2/DVEBMGS00/j2ee/cluster/server0/temp/CBS/d/.B/149/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/dictionary_generation_core_api.jar!/DictionaryGenerationConfigurationCompiled.xml
         [ddgen] [Info]    Using DocumentBuilder com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl
         [ddgen] [Info]    Generating datatypes/com/test/struct/Project.gstructure
         [ddgen] [Info]    Generating of DbTtable //DtDictionary/DtDbTable:.SNAP_TEST aborted with exception
         [ddgen] [Info]    Catching throwable Open SQL services not initialized!
         [ddgen] [Info]    java.lang.IllegalStateException: Open SQL services not initialized!
         [ddgen]      at com.sap.sql.services.OpenSQLPublicServices$1.invoke(OpenSQLPublicServices.java:83)
         [ddgen]      at $Proxy1.getVendorTitle(Unknown Source)
         [ddgen]      at com.sap.sql.services.OpenSQLPublicServices.getVendorTitle(OpenSQLPublicServices.java:416)
         [ddgen]      at com.sap.sql.NativeSQLAccess.getVendorTitle(NativeSQLAccess.java:333)
         [ddgen]      at com.sap.dictionary.database.dbs.Database.getVendorTitleForDatabaseName(Database.java:145)
         [ddgen]      at com.sap.dictionary.designtime.DtDbTableExpanded.isTableOk(DtDbTableExpanded.java:278)
         [ddgen]      at com.sap.dictionary.designtime.DtDbTableExpanded.expand(DtDbTableExpanded.java:175)
         [ddgen]      at com.sap.dictionary.designtime.DtDbTableExpanded.<init>(DtDbTableExpanded.java:50)
         [ddgen]      at com.sap.dictionary.tools.generation.Generation.generatePersistentDbTable(Generation.java:795)
         [ddgen]      at com.sap.dictionary.tools.generation.console.GenerationConsole.generateDbTables(GenerationConsole.java:1130)
         [ddgen]      at com.sap.dictionary.tools.generation.console.GenerationConsole.generate(GenerationConsole.java:171)
         [ddgen]      at com.sap.dictionary.generation.ant.GenerationAnt.main(GenerationAnt.java:51)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         [ddgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         [ddgen]      at java.lang.reflect.Method.invoke(Unknown Source)
         [ddgen]      at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:238)
         [ddgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         [ddgen]      at org.apache.tools.ant.Task.perform(Task.java:364)
         [ddgen]      at org.apache.tools.ant.Target.execute(Target.java:341)
         [ddgen]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
         [ddgen]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         [ddgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
         [ddgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:114)
         [ddgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:57)
         [ddgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
         [ddgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
         [ddgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         [ddgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [ddgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         [ddgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         [ddgen]      at java.lang.reflect.Method.invoke(Unknown Source)
         [ddgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
         [ddgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
         [ddgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
         [ddgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
         [ddgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
         [ddgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1515)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:761)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:527)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:452)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:324)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:262)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:217)
         [ddgen]      at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:178)
         [ddgen] [Error]   Unknown exception during generation Open SQL services not initialized! (java.lang.IllegalStateException: Open SQL services not initialized!)
         [ddgen] [Error]   Generation failed due to errors (1 seconds)
    Error: F:\usr\sap\SA2\DVEBMGS00\j2ee\cluster\server0\temp\CBS\d\.B\149\DCs\test.com\test\tonddic\_comp\gen\default\logs\build.xml:70: [Error]   Generation failed!
         at com.sap.dictionary.generation.ant.DDGenAntTask.execute(DDGenAntTask.java:262)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
         at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:114)
         at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:57)
         at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
         at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
         at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1515)
         at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:761)
         at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:527)
         at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:452)
         at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:324)
         at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:262)
         at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:217)
         at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:178)
    Ant runtime 2.047 seconds
    Ant build finished with ERRORS
    [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Build plugin finished at 2008-02-11 14:21:13 GMT+01:00 (CET)
    Total build plugin runtime: 3.594 seconds

    SAP Note 1118779 helpded

  • BPM CBS - Exception during process compilation

    Hi Experts,
    I am developing a BPM process using SAP NWDS 7.2 and a remote NWDI track.
    I have the following issue: When I edit my process, I create an activity for submit this changes. Later I try to check-in the activity and everything is okay, but when I try to activate it, the build finished with Errors. This is very unusual because locally I can to build this project without errors, and I can to deploy it directly to the Server without errors.
    The summary of error in CBS Build Log is the following:
    PF.DefaultDataArea:DCs/******.***/compose/pre/pr/pm/_comp/src/bpmn/procesoprecontractual mdn.bpmn#E0A5ADB5FB36314E74BD11E09935002564647A9C (MRI), CompilerType: BPMN2CSVCOMPILER
    Compiling process 'Proceso Precontractual' ...
    Error: "BPM.bp.00006" BC-BMT-BPM-SRV com.sap.tc.glx.BpemTask execute()- Exception during process compilation, compilerType:
    BPMN2CSVCOMPILERcaused by java.lang.IllegalArgumentException:
    com.sap.sdo.impl.xml.XmlParseException: Invalid byte 2 of 4-byte UTF-8
    sequence.
    Ant build finished with ERRORS
    java.lang.IllegalArgumentException:
    com.sap.sdo.impl.xml.XmlParseException: Invalid byte 2 of 4-byte UTF-8
    sequence.
    Error: Build stopped due to an error: java.lang.IllegalArgumentException:
    com.sap.sdo.impl.xml.XmlParseException: Invalid byte 2 of 4-byte UTF-8
    sequence.
    MOIN forced shutdown initiated.
    I checked the file "DCs/*****.**/compose/pre/pr/pm/_comp/src/bpmn/procesoprecontractual mdn.bpmn" and it doesnu2019t have any invalid characters like latin characters "á,é,í,ó,ú,ñ". I donu2019t know what other kind of characters are invalid or what is the exactly error.
    Thanks,
    Julian Andres Sanchez

    Hello,
    This issue is resolved now.
    The problem was with the file system space on the Unix server(on which portal is installed).
    The server administrators and the Basis team extended the disk space and issue got resolved.
    Thanks for all your inputs.
    Sonali.

  • Regarding CBS buildspace / JDI Track

    Dear all,
       I've a total of 0 broken DCs in EPD_EMITRACK_D..and all these  Dcs are healthy,built successfully .but in EPD_EMI_TRACK_C,there's one broken DC,and it leads to fail of transportation of the activity. Any idea how to solve it? thank you
    Regards,
    Joan

    Hi
    see the following link ,it will be helpful for u.
    [CBS Build Error |CBS Build Error]
    Regards
    Hazrath

Maybe you are looking for

  • How to call a web service from a session bean's business method???

    Hi Experts, Can anybody help in calling a web serivce frm a session bean's business method?? Hw do we do that? I have one requirement where i want to send emails to set of users for which i have email sending web service ready.. How can i call it thr

  • Unable to compile using rmic

    Hello all I have successfully compiled files using javac. The path is set, so I just need to open a command prompt and simply type javac AddServerImpl.java and it compiles with out errors. I do not have to specify any path at all. But when I try to c

  • Weird behaviour on log files

    Hi. Just trying to add more log members. In order to DROP logfile group, I need to make sure it is INACTIVE. But each log group is ACTIVE / CURRENT: SQL> SELECT GROUP#, STATUS FROM V$LOG; GROUP# STATUS 1 CURRENT 2 ACTIVE 3 ACTIVE So I added another l

  • Run numerous xslt from java

    I have one xml file, and around 6 xsl files that result in different transformations. Given a path name to the xml file, how do I run these transformations in java? Also, is it possible to store the filenames of the xsl files as parameters in the jav

  • Relinking Deleted Audio to Clips

    Is there a way to relink deleted audio from clips that were unlinked from their audio tracks that were then deleted? so basically, if I have a clip, cut it and edit it, unlink the video and audio, delete the audio, and then later want to have the aud