CC 2014 can I go back with a project to CC normal ?

I have a project is on CC 2014 and looks like it have to many thinks going on in CC 2014 can I go back with the project to just CC and how... thanks.

No.

Similar Messages

  • Can i go back with time machine but without the applications(to keep it the same)?

    can i go back with time machine but without the applications(to keep it the same)?
    i want to make my mac "younger" but i've got applications that i want to keep and i have them not so long ago...

    Clone your system them.
    Keep your OS and apps on separate hard drives.
    Install the OS if you must for now on another hard drive.
    Use Setup Assistant when done.
    = = =
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • HT201250 I accidentally didn't save a document on my desktop--a report.  Can I go back with time machine and recover my desktop and save the file?

    I accidentally didn't save a document on my desktop--a report.  Can I go back with time machine and recover my desktop and save the file?

    If you saved it at least once, then time machine should have a copy of the document at the state you last saved it.  I'm guessing tha's not the case however or the copy of the file would still be on your Desktop.
    If you never saved it a single time, yet closed the window and dismissed the warnings about an unsaved document, then you are out of luck as far as I know.

  • With 3.6 and earlier, one website I use would have a "frame" around thumbnails which would go away once I accessed it. Aftwer 4.0, no frame. Frames still there with IE. Is there a setting where I can get them back with the newer versions of Firefox?

    Pretty much what I asked above. Obviously there was a change between 3.6 and 4.0 that is causing this.
    These black "frames" around the thumbnails are very handy as they let me know which ones have been accessed and which have not. Once I would click on the thumbnail, the "frame" around it would disappear. I could come back weeks later and tell what had been accessed and what hadn't.
    I discovered this problem this spring when I upgraded to 4.0 in my laptop. I kept "nursing" the 3.6 in my desktop as I did not want to lose that feature. The other night I tried to update my 3.6 and, unfortunately, I got force-fed 6.0.
    Anyhow, it has to be something you changed when 4.0 was brought out - and has stayed changed in 5.0 and 6.0. As noted above, the frames are still there if I go to the site with Internet Explorer. Sure love to find a way to get this feature back with Firefox!

    Pretty much what I asked above. Obviously there was a change between 3.6 and 4.0 that is causing this.
    These black "frames" around the thumbnails are very handy as they let me know which ones have been accessed and which have not. Once I would click on the thumbnail, the "frame" around it would disappear. I could come back weeks later and tell what had been accessed and what hadn't.
    I discovered this problem this spring when I upgraded to 4.0 in my laptop. I kept "nursing" the 3.6 in my desktop as I did not want to lose that feature. The other night I tried to update my 3.6 and, unfortunately, I got force-fed 6.0.
    Anyhow, it has to be something you changed when 4.0 was brought out - and has stayed changed in 5.0 and 6.0. As noted above, the frames are still there if I go to the site with Internet Explorer. Sure love to find a way to get this feature back with Firefox!

  • Is there a way I can use a Master with sub-projects on different calendars?

    Wondering if I can get some advice creating a Master Project (MSP2013 Standard, no Project Server software). I have 3 projects of which 2 are utilising a Standard calendar 8:00AM to 5:00PM 8hr day 40hr week, and 1 project (the largest) utilising a Customised
    calendar 7:30AM to 3:30PM  7.5hr day 37.5hr week.
    The dominant project is running on the Customised calendar so I have set the Global Options in the Master to reflect the 7:30AM to 3:30PM  7.5hr day 37.5hr week. Then set the calendar in Master Project Information default to the Customised calendar. 
    Finally, the resource pool for all 3 projects is in the Master.
    No problem when I insert the sub-project into the Master which is using the customised calendar. All data is reflective of the original project.  However, when I insert either of the 2 sub-projects using the 40hr week calendar the Summary Headings for
    the inserted projects are incorrect.  For example, instead of being 2 weeks duration, the summary heading displays 2.13 weeks, and instead of 4 weeks duration, the summary heading displays 4.27 weeks.
    The Global settings appear to be interfering with the projects on the Standard calendars.  I am surprised and extremely frustrated as I thought the settings in the Master would not affect anything?
    Sorry guys, have posted this in 3 different places as it is so important to me!

    Hi Guys, many thanks for your responses, really appreciate your time, however I am finding this much more complex. I have put my original sheets to one side and started again. Once again this is very important hence a lot of detail here. I am hoping something
    will provide a clue where I am going wrong.
    New sheet |save as Master | Change Working Times |copy Standard Calendar and called it 37.5 Hour
    Calendar| No exceptions | Work Weeks tab |Details | Set Monday to Friday 7:30AM to 12:30PM then 1:00PM to 3:30PM. Selected Options | Schedule | Start 7:30AM End 3:30PM |Hours 7.5 | Hours per week 37.5 |Auto Scheduled |Duration Hours|
    Work Hours |Fixed Duration | OK OK. Project | Project Information | Calendar changed to 37.5 Hour Calendar | Save.
    In my previous example I noted that my main project is scheduled 37.5 hours but I will skip inserting it here, the issue is subprojects with different settings to the Global, that is mixing projects with different calendars in a Master.
    New sheet | save as 40 Hour Project |Change Working Times |Standard Calendar | No exceptions | Selected Options | Schedule | Start 8:00AM End 5:00PM |Hours 8 Hours per week 40 |Auto Scheduled |Duration Weeks | Work Hours |Fixed Duration
    | OK OK | Save.
    Entered 5 new Tasks, all 2weeks duration, all linked Finish to Start. Inserted a Summary Heading named 40 Hour Summary | 40 Hour Summary Duration = 10 wks | Start 9 June 1014 8:00 AM | Finish 15 August 2014 5:00 PM |Created 1 Resource called Fred | 100%
    |$100 Standard Rate | Assigned Fred to all tasks 100% | Project | Project Information | Statistics | 10w 400h $40.000 |Save and Close | All correct.
    Back to the Master | Project | Insert Subproject | selected 40 Hour Project |Duration 400 hrs | Start 9 June 2014 8:00AM | Finish 21 August 2014 10:30AM. It appears the Global settings are affecting the inserted subproject note the finish time is now
    10:30AM. Project | Project Information |Statistics |Duration 400h | Work 400h | All correct!
    BUT | select View Outline Show Subtasks |This is where further changes have happened | Project | Project Information |Statistics |Duration is now
    374.5h | Work 400h.
    Besides information being displayed incorrectly these figures will affect all Reports. This example suggests you cannot have subprojects in a Master that are associated with different calendars? Surely not! Please help if you can, I have
    spent hours searching for answers, and I can’t believe I am the only one who has come across this! Many thanks.......

  • I can't go back with my iPhone 5 on Facebook. Stuck in a photo album with no button to go back!

    I am stuck in a photo album with no button to go back! If I press the home button I get back to the main iPhone screen, when I go back to the Facebook app, it brings me straight back to the photo again with no option to et put of there?!

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Can't browse back with time machine

    Time machine seems to work properly till I try to browse back in time. I am clicking on the arrow that should bring me back in time, but nothing happens. I only see the initial today window. I have time machine on since December the 1st and it has back-up copies since then, so I assume that I should be able to go back into time, at least a bit.
    Cheers,
    Robert

    Go into System Preferences > Sharing and give your computer a name using only alphanumeric characters with no spaces or punctuation.
    Mac OS X 10.5: Time Machine backups are not visible
    http://docs.info.apple.com/article.html?artnum=306928

  • Can I sync E71 with MS Project?

    I mean, can I schedule a task within an MPP file... and sync it with my nokia, so the phone could ring the alarm when i specified in the MS project file ?
    Is there any-how ?

    It's not easy.
    have had recent success after an unexplained lost connection between Microsoft Outlook and iCal.

  • HT5167 I have 10.7.5 can I go back to 10.7.4 with this?

    I have 10.7.5 & 10.8.2.  I'm having issues with some 3rd party software CaptureOne.  I spoke with them & they said I need to go back to 10.7.4. Can I go back with this download?

    No.

  • Can Quicktime Updates interfere with saved iMovie projects?

    Hello.
    I'm just about to do an update to the latest Quicktime and I wondered if these updates can cause any problems with iMovie projects that have been made and saved on my computer with older Quicktime versions?
    Thanks
    Rich

    Thanks Bengt,
    But how about after a project is fully completed and burned to DVD but still remaining stored on the computer as a final iMovie project. In case you want to burn it again or just play it on the computer, will that original iMovie on the computer be confused by a newer Quicktime Update? I have all mine still saved as both disc images and also the original project. I know a disc image will not be affected but I was curious about the original project?
    Rich

  • HT1212 My iPhone was stollen and 3 months later the police return it back to me. But now it is locked to other iCloud account. How can I register it with my account?

    My iPhone was stollen and 3 months later the police return it back to me.
    But now it is locked to other iCloud account.
    How can I register it with my account?
    The device is still registered in My Support Profile->My Products and untit 29.11.2014 I was able to see it in "Find My iPhone" as offline.

    Was the link I provided of no use.

  • I can't select Photoshop CC 2014 when using the "Open with" menu in Windows 7

    I have recently installed CC 2014, and uninstalled my CC version. When I go to a jpeg, or any image file in windows explorer, I right-click and "open with" and it isn't listed on my program list to open the file with. I click on "browse programs", find the exe file in adobe-photoshop cc2014 folder and click OK, and it just goes back to the open with menu with no option for photoshop.
    Any ideas on how I can get it on that list, so I can open these files from the file location, instead of opening up photoshop and then searching for the file location within photoshop?
    Also, I don't have any problems opening up the pictures from within photoshop, just within windows explorer.

    I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
    The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • My iTunes library is missing since upgrade Lion 7.2.  I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

    Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
    I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

    hi Limnos,
    I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th.  (90% of the media is missing, along with all playlists)  The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29.  (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
    I have my iTunes folder backed up on both an external drive as well as Time Machine.
    I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up. 
    Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
    Thank you for your help!
    Deb

  • I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is rersolved?

    I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is resolved?

    Please do a Live Update to the Norton product.
    They have provided an important update to Firefox 4.0.1.

Maybe you are looking for

  • How to make movie in iDVD without themes.  iDVD app quitting during burning

    I am trying to make movie without themes and still having problems. I have tried using the map view in themes, dragging movie into the first box on left, looping it - but am seeing a yellow error sign in the theme box. Don't know why this is. Have tr

  • Book Module - how to change page size?

    I'd like to design book pages for my existing hard covers - A4 landscape and portrait. Also for specific 12x12 cover which takes 11.69" x 12" paper. Have watched various YouTubes, search within support - but haven't found a reference to add preferred

  • What do I need?

    Post Author: pma CA Forum: Upgrading and Licensing Hello, I am hoping this is a basic question for someone.  We use Crystal Reports Professional II to report off a MS SQL server.  We would like to share report output amoung our small office of about

  • Is there an "Out of Range" Function in LabVIEW?

    Howdy, My issue is I have an input value that is compared to an upper and lower limit. If the input is within the range I want the program to do nothing. If the input is below the lower value I need to send a "TRUE" signal to a relay. If the input is

  • Purchase order Migration

    HI Experts, I am doing Purchase Orders migration from One SAp to another SAP. For this I thought i can use the goto - > messages -> output option and send An idoc from Current SAP to new SAP. It has generated the IDOC type as ORDERS and moved success