CC 5.2 - Functions point to one system, but analysis should be on another

In our CC 5.2 setup, the functions in Rule Architect have the system listed on which it has been installed. We have completed configuring the connectors to the intended system. However, it's not clear where we can reset the functions so that they all have the intended system listed rather than the system on which they are installed.
Would someone be able to point me in the right direction?
Thanks,
Santosh Krishnan

Hello,
Unfortunately there is no way to make this automatic... First if you are using CC 5.2 using logical system is usually a good idea (for instance if you have three systems from the same landscape).
Therefore you define your rules at logical system level and then you just have to add new systems (connectors) to your logical system.
If you can't use logical system (for instance if the two systems are different version or type) you have two possibilities:
- The first one is to import again the standard rules using the files provided with the Java packages. You just have to go to configuration / Rule Upload / Function authorization and select the newly connector and import the needed files.
However this will import standard rules disregarding changes you might have made.
- The other possibility is to go to Rule Architect / Export rules then use a good text editor to copy/paste line that are connector specific with the new connector name. Using a good technique this can take 15 minutes and allow you to have the exact same customizing for your systems.
Good luck.
Jerome.

Similar Messages

Send PO from one system and create a SO in another system

Hello Gurus
ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
What i am planning to do:
Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
Steps i am planning to do:
1). Configure the sending system for a outbound PO idoc
2). Configure the receiving system for a Inbound SO idoc
3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
Questions:
1). Am i missing any steps?
2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
~Suresh

Hi Suresh,
this might be of some help.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
kindly reward if helpful.
cheers,
Hema.

Risk terminator - Works in one system but not in the other

Hi
I have two SAP systems which is connected to one GRC system. Risk Terminator works well for the one system but does not work at all for the other.
I have done the necessary configuration, set-up the RFC connector, tested the connectors, tested the connections from the GRC system. All seems fine but when I create a role in PFCG risk terminator does not seem to be trigged at all in my one system.
Please advise
Regards
Mo

I would check the adapter for the other system and that the external program is maintained correctly along with all the settings in /VIRSA/ZRTCNFG

CL_WD_RUNTIME_SERVICES= ATTACH_FILE_TO_RESPONSE( ) works in one system but does not in other

Hi folks,
We are facing an issue here with a custom web dynpro application that export an excel. The following piece of code has been written in this application to export an excel:
cl_wd_runtime_services=>attach_file_to_response(
       EXPORTING
         i_filename      = c_filename
         i_content       = xtext
         i_mime_type     = c_mimetype
         i_in_new_window = abap_false
         i_inplace       = abap_false ).
Now, the issue is this - it works fine in one system but does not in other system. HttpWatch shows ERROR_HTTP_INVALID_SERVER_RESPONSE in the system where it does not work. Any ideas?
Regards,
Shiromani

Hi Shiromani,
You mean "Other System" is other PC. If so, it seems that there is an issue with browser
Please check the below SAP note
1679126 - Server sends timeouts that cannot be reproduced
Also, compare the browsers versions in both systems.
Regards,
Rama

Same exact update runs fine in one db but causes ORA-00904 in another

I have an update statement that runs fine in one db but causes "" error in another. The two databases table structures are the same. I checked for synonyms and reserved words on BASE and COMPANY_ID but did not come up with anything. The db where it is working is 10.2. The db where it is not working is 10.1.
Here is the statement:
1 UPDATE t_company base
2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
3 short_name, short_name2) =
4 (SELECT company_name, source_id, company_name_lco, canonical_name,
5 short_name, short_name2
6 FROM t_auth_company comp
7 WHERE comp.company_id = base.company_id
8 AND source_id =
9 (SELECT source_id
10 FROM (SELECT auth.source_id, trumping_order
11 FROM t_auth_company auth,
12 t_trumping_rule rl
13 WHERE auth.company_id = base.company_id
14 AND auth.company_name IS NOT NULL
15 AND rl.source_id = auth.source_id
16 AND rl.attribute_id = 'abc'
17 ORDER BY rl.trumping_order)
18 WHERE ROWNUM = 1))
19 WHERE
20 (-- The company has been updated
21 company_id IN (
22 SELECT company_id
23 FROM t_auth_company auth
24 WHERE auth.company_name_lco >= sysdate
25 OR auth.company_id_lco >= sysdate)
26 OR
27 ( -- The trumping rule for the attribute has been changed
28 SELECT MAX(last_changed_on)
29 FROM t_trumping_rule rl
30 WHERE rl.attribute_id = 'abc' ) >= sysdate
31 )
32 -- The company has been merged
33 AND 1 < (SELECT COUNT (*)
34 FROM t_auth_company auth
35* WHERE auth.company_id = base.company_id)
SQL> /
WHERE auth.company_id = base.company_id
ERROR at line 13:
ORA-00904: "BASE"."COMPANY_ID": invalid identifier
Thank You
Boris

Thank you for responding. It is syntactically working in the 10.2 database. Please, see this:
SQL> UPDATE t_company base
2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
3 short_name, short_name2) =
4 (SELECT company_name, source_id, company_name_lco, canonical_name,
5 short_name, short_name2
6 FROM t_auth_company comp
7 WHERE comp.company_id = base.company_id
8 AND source_id =
9 (SELECT source_id
10 FROM (SELECT auth.source_id, trumping_order
11 FROM t_auth_company auth,
12 t_trumping_rule rl
13 WHERE auth.company_id = base.company_id
14 AND auth.company_name IS NOT NULL
15 AND rl.source_id = auth.source_id
16 AND rl.attribute_id = 'abc'
17 ORDER BY rl.trumping_order)
18 WHERE ROWNUM = 1))
19 WHERE
20 (-- The company has been updated
21 company_id IN (
22 SELECT company_id
23 FROM t_auth_company auth
24 WHERE auth.company_name_lco >= sysdate
25 OR auth.company_id_lco >= sysdate)
26 OR
27 ( -- The trumping rule for the attribute has been changed
28 SELECT MAX(last_changed_on)
29 FROM t_trumping_rule rl
30 WHERE rl.attribute_id = 'abc' ) >= sysdate
31 )
32 -- The company has been merged
33 AND 1 < (SELECT COUNT (*)
34 FROM t_auth_company auth
35 WHERE auth.company_id = base.company_id)
36 /
0 rows updated.
SQL>
The table structures are as follows:
CREATE TABLE RTCR_UCDB.T_AUTH_COMPANY
AUTH_COMPANY_ID NUMBER(22),
SOURCE_ID NUMBER(3) NOT NULL,
LD_COMPANY_ID NUMBER(22),
SOURCE_COMPANY_ID VARCHAR2(150 BYTE),
MATCH_DECISION NUMBER(1) DEFAULT 0 NOT NULL,
MATCH_DECISION_LCO DATE DEFAULT sysdate,
COMPANY_ID NUMBER(22),
COMPANY_ID_LCO DATE,
COMPANY_NAME VARCHAR2(150 BYTE),
COMPANY_NAME_LCO DATE DEFAULT sysdate,
CANONICAL_NAME VARCHAR2(150 BYTE),
SHORT_NAME VARCHAR2(150 BYTE),
SHORT_NAME2 VARCHAR2(150 BYTE),
URL VARCHAR2(150 BYTE),
URL_LCO DATE DEFAULT sysdate,
NURL VARCHAR2(150 BYTE),
PRIMARY_SIC VARCHAR2(150 BYTE),
PRIMARY_SIC_LCO DATE DEFAULT sysdate,
PRIMARY_TICKER VARCHAR2(15 BYTE),
PRIMARY_TICKER_LCO DATE DEFAULT sysdate,
EXCHANGE_ID VARCHAR2(60 BYTE),
EXCHANGE_ID_LCO DATE DEFAULT sysdate,
NEXCHANGE_ID VARCHAR2(60 BYTE),
ADDRESS VARCHAR2(150 BYTE),
ADDRESS_LCO DATE DEFAULT sysdate,
NADDRESS VARCHAR2(150 BYTE),
NADDRESS_CONTAINS VARCHAR2(150 BYTE),
CITY VARCHAR2(150 BYTE),
CITY_LCO DATE DEFAULT sysdate,
NCITY VARCHAR2(150 BYTE),
STATE VARCHAR2(150 BYTE),
STATE_LCO DATE DEFAULT sysdate,
NSTATE VARCHAR2(150 BYTE),
POSTAL_CODE VARCHAR2(15 BYTE),
POSTAL_CODE_LCO DATE DEFAULT sysdate,
NPOSTAL_CODE VARCHAR2(15 BYTE),
COUNTRY_ID VARCHAR2(10 BYTE),
COUNTRY_ID_LCO DATE DEFAULT sysdate,
NCOUNTRY_ID VARCHAR2(10 BYTE),
TELEPHONE VARCHAR2(60 BYTE),
TELEPHONE_LCO DATE DEFAULT sysdate,
NPHONE VARCHAR2(60 BYTE),
PHONE_7D VARCHAR2(60 BYTE),
PHONE_AREA VARCHAR2(60 BYTE),
FAX VARCHAR2(60 BYTE),
FAX_LCO DATE DEFAULT sysdate,
NFAX VARCHAR2(60 BYTE),
GW_COMPANY_ID VARCHAR2(150 BYTE),
GW_COMPANY_ID_LCO DATE DEFAULT sysdate,
CIK_NUMBER VARCHAR2(150 BYTE),
CIK_NUMBER_LCO DATE DEFAULT sysdate,
IRS_EIN VARCHAR2(150 BYTE),
IRS_EIN_LCO DATE DEFAULT sysdate,
MIN_DATA_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
OBSOLETE_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
OBSOLETE_FLAG_LCO DATE,
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
CREATED_ON DATE NOT NULL
CREATE TABLE RTCR_UCDB.T_TRUMPING_RULE
SOURCE_ID NUMBER(3) NOT NULL,
ATTRIBUTE_ID NUMBER(5) NOT NULL,
TRUMPING_ORDER NUMBER(3),
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT USER,
LAST_CHANGED_ON DATE DEFAULT sysdate
CREATE TABLE RTCR_UCDB.T_COMPANY
COMPANY_ID NUMBER(22),
COMPANY_NAME VARCHAR2(150 BYTE),
COMPANY_NAME_SID NUMBER(3),
COMPANY_NAME_LCO DATE,
CANONICAL_NAME VARCHAR2(150 BYTE),
SHORT_NAME VARCHAR2(150 BYTE),
SHORT_NAME2 VARCHAR2(150 BYTE),
URL VARCHAR2(150 BYTE),
URL_SID NUMBER(3),
URL_LCO DATE,
NURL VARCHAR2(150 BYTE),
PRIMARY_SIC VARCHAR2(150 BYTE),
PRIMARY_SIC_SID NUMBER(3),
PRIMARY_SIC_LCO DATE,
PRIMARY_TICKER VARCHAR2(15 BYTE),
PRIMARY_TICKER_SID NUMBER(3),
PRIMARY_TICKER_LCO DATE,
EXCHANGE_ID VARCHAR2(60 BYTE),
EXCHANGE_ID_SID NUMBER(3),
EXCHANGE_ID_LCO DATE,
NEXCHANGE_ID VARCHAR2(60 BYTE),
ADDRESS VARCHAR2(150 BYTE),
ADDRESS_SID NUMBER(3),
ADDRESS_LCO DATE,
NADDRESS VARCHAR2(150 BYTE),
CITY VARCHAR2(150 BYTE),
CITY_SID NUMBER(3),
CITY_LCO DATE,
NCITY VARCHAR2(150 BYTE),
STATE VARCHAR2(150 BYTE),
STATE_SID NUMBER(3),
STATE_LCO DATE,
NSTATE VARCHAR2(150 BYTE),
POSTAL_CODE VARCHAR2(15 BYTE),
POSTAL_CODE_SID NUMBER(3),
POSTAL_CODE_LCO DATE,
NPOSTAL_CODE VARCHAR2(15 BYTE),
COUNTRY_ID VARCHAR2(10 BYTE),
COUNTRY_ID_SID NUMBER(3),
COUNTRY_ID_LCO DATE,
NCOUNTRY_ID VARCHAR2(10 BYTE),
TELEPHONE VARCHAR2(60 BYTE),
TELEPHONE_SID NUMBER(3),
TELEPHONE_LCO DATE,
NPHONE VARCHAR2(60 BYTE),
PHONE_7D VARCHAR2(60 BYTE),
PHONE_AREA VARCHAR2(60 BYTE),
FAX VARCHAR2(60 BYTE),
FAX_SID NUMBER(3),
FAX_LCO DATE,
NFAX VARCHAR2(60 BYTE),
GW_COMPANY_ID VARCHAR2(150 BYTE),
GW_COMPANY_ID_SID NUMBER(3),
GW_COMPANY_ID_LCO DATE,
CIK_NUMBER VARCHAR2(150 BYTE),
CIK_NUMBER_SID NUMBER(3),
CIK_NUMBER_LCO DATE,
IRS_EIN VARCHAR2(150 BYTE),
IRS_EIN_SID NUMBER(3),
IRS_EIN_LCO DATE,
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
CREATED_ON DATE NOT NULL
)

I have to move desks a lot at work. Today I bought $30 worth of music on one computer, but now I'm at another desk and another computer and cannot find my music! Every time I change computers I make sure to log out and log back in. So where is my music?

I have to move desks and computers a lot at work. Today I bought $30 worth of music on one computer - but now I am sitting at a new desk and computer and can't find my music. Don't tell me to make sure I log on and off....i do! So where is my music?

The music you purchased is probably in our profile directory on the computer where you purchased it. Unless your IT department has the computers setup to use "roaming profiles" your "My Music" folder will be stored locally on each computer. I don't know of too many companies that use "roaming profiles" as they tend to cause about as many problems as they were designed to "fix". If you are going to be moving to many different computers, I suggest that you consider moving your iTunes Library to an external drive that you move with you. This way your purchased content is stored on your external drive and not on the local drive of the PC you are using at the time of the purchase.

How to handle error msgs in one system which are available only in another?

Hi Experts,
    I have two SAP systems A and B. An ABAP program in system A calls Function module in System B.
    System B returns any error with message id, class and variables in the event of any invalid data.
    How to handle this returned error message in system A when the message class exists only in system B.
    One way is to create a copy of this message class along with all the messages in system A.
    But the function module in system B calls many BAPIs which in turn may return messages from many different message classes. So making a copy of so many message classes in System A means creating so many custom objects.
   Is there any better way to handle this without creating the message classes in System A?
Thanks & Regards
Gopal
Edited by: gopalkrishna baliga on Apr 27, 2010 6:28 AM

Hi Gopal,
    As per my understanding your function module can retrun any number of error messages and it may have varied descriptions.It would be difficult to handle each of these error individually.
One of the methods can be..use the raise exception otion whenever any error is encountered if you want to do in the shortedt way.
you can catch all th set of error in soem exceptions and then use the same.
Handling each error individually in the source system would be difficult if these errors do not exisit in the source system at all.

Patch Successful on One system but not another?

I am wondering if there is a Cache dump or process of getting a patch system to recover from a failure where the patch has deployed successfully on a different system. There are a variety of errors depending on the patch as well as device. I see some remediation errors as well as server not found etc.
Will Clear cache help resolve this type of thing?
Does Windows Update service running cause problems with this process? Any other tips to get the rest of my deployment to become more successful?
If someone from Novell is listening... Where is the documentation on Patch deployment best practices? I have tried to review the online docs and can't find anything that gives clear guidelines on patch deployment. I also find that Windows update will show completely Updated by Microsoft yet ZPM shows massive patch deployments needed. I also have .Net 3.5.1 updates that showed successfully deployed, yet when the zac ps or DAU runs it still shows the update as needed.
Any help or guidance would be extremely helpful.
Thanks
Richard

rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Unable to access a certain link by one account but able to access under another account

I use safari on my imac. I was able to access a shared link (to access a briefcase) via a university website. It requires me to enter ID and password to access the briefcase. It also requires me to enter my ID and password whenever I click a new file in the briefcase. The shared link was okay until I let Safari remember my password.
Now when I click the shared link, it says "Error 404! No such item". I am not able to access that shared link.
I tried to log on my imac with another user/account, and found out that the shared link is still working. I also tried to use my macbook and the link is working as well. So i guess that it must be something wrong when I let Safari remember my password the first time when I accessed that link.
I have done Safari Reset and cleared all history, cookies, passwords, etc... but I am still not able to access that link under my own account.
How can I fix this?
Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I wanted to display the multiple rows in one row but column should be diff

Hi
Could any body help me regarding this query how to write to get the multiple rows in one row.
eg.
i have one table tab1(eno number,ename varchar2,uid1 varchar2,uid2 varchar2,uid3 varchar4)
but when i am runing the query I am getting multiple record against one eno number because of uid1,uid2,uid3
suppose value of table is
eno ename uid1 uid2 uid3
1 a u1
1 a u2
1 a u3
when i am quering it is coming same as above but I want in one row
eno ename uid1 uid2 uid3
1 a u1 u2 u3
can any onle help me how to write the query for this requirement.
thanks
saif

which is hard coded in my code? Here another approach, but fail for c as there is no information for the value of a column: does 1 in u1 means col 1, etc.
/* Formatted on 2012/05/29 16:29 (Formatter Plus v4.8.8) */
WITH t AS
     (SELECT 1 col1, 'a' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u3' col3
        FROM DUAL)
SELECT   xx.col1, xx.col2, MAX (DECODE (xx.rn, 1, col3)) AS uid1, MAX (DECODE (xx.rn, 2, col3)) AS uid2,
         MAX (DECODE (xx.rn, 3, col3)) AS uid3
    FROM (SELECT t.col1, t.col2, t.col3, ROW_NUMBER () OVER (PARTITION BY col1, col2 ORDER BY col3) rn
            FROM t) xx
GROUP BY col1, col2;output:
COL1     COL2     UID1     UID2     UID3
1     a     u1     u2     u3
1     b     u1     u2     u3
1     c     u1     u3
Edited by: ʃʃp on May 29, 2012 2:30 AM

I have music on one computer but need to move to another

I am sure this has been asked several times but I have not been able to find a concrete answer. I have two laptops. The original one has tons of songs that have not been purchased through itunes but instead downloaded from CD's and an Itunes account they are saved to. I recently purchased a new computer that I started using the same itunes account with but cannot figure out how to get the music from the old computer with the itunes account to the new computer using the same itunes account without having to download all of the music again. Please help!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

Impdp work with system but doesn't work with another user

Hi,
We have troubles with import of transportable tablespace, when i try to import it with system the import is done currectly, when i try to use another user we receive this message :
impdp bmcese/***** directory=TTS_DIR dumpfile=RMCCO_RMC_ANA_STS_ABB_CO121001.dmp TRANSPORT_DATAFILES=/data/TTS/RMCCO_RMC_ANA_STS_ABB_CO121001.dbf logfile=tts_imp_proc.log
ORA-31626: il job non esiste
ORA-31633: impossibile creare la tabella principale "BMCESE.SYS_IMPORT_TRANSPORTABLE_05"
ORA-06512: a "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: a "SYS.KUPV$FT", line 1020
ORA-00959: tablespace 'RMCCO_RMC_UTZ_PP080531' inesistente
this happens only on development server and it work into test server, so i don't think that the problem is in grants(i controlled that are the same and i have tried with DBA grant too and we received the error).
Another strange thing is that tablespace 'RMCCO_RMC_UTZ_PP080531' is not included into the dump that i try to import and it doesn't exist in the database.
Thx
Edited by: user11272630 on 10-ott-2012 8.40

I've extraced the role/privs granted to BMCESE using this query
select granted_role from DBA_ROLE_PRIVS where grantee='BMCESE'
union
select privilege from DBA_SYS_PRIVS where grantee='BMCESE';
Result on Server where the impdp doesn't work:
GRANTED_ROLE
CONNECT
CREATE ANY TABLE
CREATE PROCEDURE
CREATE SESSION
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE VIEW
DATAPUMP_IMP_FULL_DATABASE
DROP TABLESPACE
EXECUTE_CATALOG_ROLE
EXPORT FULL DATABASE
IMPORT FULL DATABASE
IMP_FULL_DATABASE
QUERY REWRITE
RESOURCE
UNLIMITED TABLESPACE
results on server where the impdp work:
GRANTED_ROLE
CONNECT
CREATE PROCEDURE
EXECUTE_CATALOG_ROLE
IMP_FULL_DATABASE
UNLIMITED TABLESPACE
BMCESE has more grant and privs on the server where the impdp doesn't work.
I've controlled the grant of read, write on the directory.
I've tried to give DBA priv too to the user.
So i don't think in a priv problem, i think that the problem is in the unexistent tablespace reported in the error.
Someone has another suggest to give.
Thx

Embedded images in Word documents are incorrect on one computer but show up fine on another computer

I've not been able to find the root of the problem, but I use an application on my laptop that generates images in a document, and the document can be saved either with docx or htm/html extensions. On the laptop, I see the correct images. When I transfer
the document to my workstation either over the network or by a flash drive, the incorrect images pop up - images from a project that I was working on last summer. If I save the documents as a doc on my laptop, the correct images show up on my desktop. This
happens on many documents that I use, but I do have a document I use as a template. I'd prefer not to create another one, because it is quite involved.
When the incorrect images show up on my workstation, I can save the document to a flash drive (you would think with the incorrect images also being saved), but the correct images show up on my laptop.
This is frustrating to always have to work around this, but I've searched Google and really haven't found anyone else having a problem very close to this. Does anyone have any ideas?
Thanks

Hi,
I'm actually thinking whether the issue is related to Office version. What are the versions of Office on your laptop and workstation?
Based on the description, the issue doesn't occur if the document is saved as .doc, it only occurs if the document is saved as .docx, so basically we can say your workstation doesn't support .docx well. Is it a version prior to Office 2007?
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Some text appears to be one font in one computer, but a different font in another computer.

The navigation buttons in my .fla file are set to the font, Arial MT in Bold. It displays no problem on my desktop computer. However, when I view the website on my laptops, the font changes to what looks to be something like Times New Roman.
The same thing happens with my "Read More" button text. It's also originally in Arial MT Bold. On my desktop it appears fine but on my 2 laptops it appears to be in Times New Roman. This is more of an issue because I have these buttons underlined. When viewing in my laptops, these underlines appear to be too long. If I shorten it, it'll probably appear to be too short when I view on my desktop.
How can I get the font to be one consistent font for all computers?
Note, this is the only font this is happening with - I have another unusual font, Miama, which many computers don't come with but it still displays on all my computers.

Thanks for your replies. It worked.

Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

CC 5.2 - Functions point to one system, but analysis should be on another

Similar Messages

Maybe you are looking for