CCADStatus.jsp not showing up (Analysis Engine Daemon Manager)

We are in GRC5.3 SPS19 and I have configured our system as per the note 999785. I am able to see the http://<server>:<port>/sap/CCBgStatus.jsp, I am seeing that the job is being run, but when I try "http://<server>:<port>/sap/CCADStatus.jsp" while I am not getting other than the heading "Analysis Engine Daemon Manager"
Heap is already at 2048M as per the note 999785. Can somebody advise what needs tobe checked.

Hi,
try note 1176262 - Analysis Daemon Page is Blank/ BG Jobs stay in ready status.
/Vit

Similar Messages

Missing App server in GRC Analysis Engine Daemon Manager

Hi,
We have two app servers for our GRC AC 5.3.The Analysis Engine Daemon Manager(http://<host>:5<nn>00/sap/CCADStatus.jsp) lists only one of the app servers .If I try the URL for the Daemon manager using the URL with app1 or app2 it lists only the background job workers and web services workers for the app1 only and not the app2.I checked the entry for table VIRSA_CC_CONFIG which has entry for the first app server ('107', 0,http://app1:5<nn>00/webdynpro/dispatcher/virsa/ccappcomp/BgJobStart', 'BgJobStart URL').Do I need to add the other URL for the other app server also.If yes how.If any one has faced this issue please help me.Your help is greatly appreciated.
Thanks,
Max

Since the Instance number (i.e. <nn> ) is a mandatory part of the URL so the URL for two app. server should be different. But first of all what is the necessity for keeping two different Instances (Java) for GRC AC? One is enough with proper hardware and system parameter sizing - right?
Also, the Batch Jobs are not App server specific stuff.. so it is not correct to say that there are Jobs from only one App server and not from the other.
regards,
Dipanjan
Edited by: Dipanjan Sanpui on Sep 27, 2010 2:51 PM

"show statistics analysis-engine" output

Hello, Support Community.
I have ASA 5512-x with IPS.
I have issue with http traffic performane.
Can someone explaine me "show statistics analysis-engine"?
Command reference:
     The Analysis Engine now displays the relative load percentage.
     You can display the relative load percentage by running the show statistics analysis-engine command.
     The relative load is calculated as the percentage of time spent in a particular inspector with the
     total of all utilized inspectors adding up to 100. Load percentage is shown when the SensorApp starts.
What does fields "active, call, create, delete, createPct, callPct" means?
My ips show next output
   Inspection Stats         Inspector        active   call       create   delete   createPct   callPct            AtomicAdvanced   1        33869337   1        0        0           84                 Fixed            72       916301     832936   832864   2           2
         MSRPC_TCP        77       418874     260023   259946   0           1
         MultiString      58       3400698    232373   232315   0           8
         ServiceDnsUdp    1        2532286    1        0        0           6
         ServiceDnsTcp    0        96         90       90       0           0
         ServiceFtp       0        301        34       34       0           0
         ServiceGeneric   1        2893468    361183   361182   0           7
         ServiceHttp      33       577255     101163   101130   0           1
         ServiceNtp       16       5064572    675330   675314   1           12
         ServiceP2PTCP    22       530879     361182   361160   0           1
         ServiceRpcUDP    1        2532286    1        0        0           6
         ServiceRpcTCP    137      9457236    360501   360364   0           23
         ServiceSnmp      1        2532286    1        0        0           6
         ServiceTNS       2        295359     293070   293068   0           0
         String           82       4518775    261993   261911   0           11
         SweepICMP        1        12         2        1        0           0
         SweepTCP         248      62673184   562290   562042   1           156
         SweepOtherTcp    125      31336592   297967   297842   0           78

Please find attached core.txt and version is
Output from show version
Application Partition:
Cisco Intrusion Prevention System, Version 7.0(2)E4
Host:
OS Version:             2.4.30-IDS-smp-bigphys
Platform:               IPS-4240-K9
Sensor up-time is 355 days.
Using 1482727424 out of 1984548864 bytes of available memory (74% usage)
Upgrade History:
IPS-sig-S492-req-E4.pkg   00:01:02 UTC Sun Jun 06 2010
Recovery Partition Version 1.1 - 7.0(2)E3
Look forward for your quick response.

Sony z3 not showing up in google device manager

Sony z3 not showing up in google device manager
I have checked the mark under security....
same with my new sony z3 tablet.
Solved!
Go to Solution.

Strange thing. Are you willing to try the repair? Do it with PCC if you want to:
http://www.sonymobile.com/gb/tools/pc-companion/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

JSP not showing code insight on press of CTRL+SPACE

Hi , i am using jDeveloper 11.1.2.
When i was using JDeveloper 11.1.1.3 , my jsp's where showing code insight correctly when i clicked on CTRL+SPACE after writing any methodname etc.
But after upgrading to jdeveloper 11.1.2 my jsps are not showing code insight on ctrl+space , only java file shows properly code insight.
Please help me.
Note: but my jsp's compile successfully and run also, only code insight is not working.
Zeeshan

can some one please help me ?
Zeeshan

9i Reports Graphic using JSP not showing in Portal

Using Portal Rel 2, 9iAS Report Server Rel 2, Oracle 9i database and 9iDS Report Builder, SUN servers and Windows2000 (for Builder).
I've created 2 reports very simple, using scott.emp table, one tabular (deptno,ename, salary) and one line graph (ename,salary) both created as .RDF (paper layout) and .JSP (web layout).
The tabular reports both work fine on portal (after setting Oracle Reports Security as Servelet and as JSP).
The graphics only work as Servlets , as .JSP it shows the little box with the red x.
If I run the reports outside of portal, all 4 work fine.
Any idea what might be the problem?
Thanks in advance for all your help on this.
Max.

Hi Zsolt:
Thanks for your response. May I ask you further questions regarding your solution:
1) content SCORM compliant?? (yes/no)
Yes, it is SCORM compliant
2) check in / publish the content in the Authoring Environment
I am not sure if my colleague has check-in/publish it in AE. I'll check on this one.
3) go to the LSO back-end and create a WBT
Do you mean creating a Course Type with Delivery Method "WBT"? if yes, I've done so. If no, then how do I do it?
4) enclose the cheked in / published content
Do you mean creating IT5006 - Course Type Content to link the content to the course type? if yes, I've done so. If no, then how do I do it?
5) try to find on the portal again
I'll ask my colleague about Step 2 and then I'll re-try again..
Thanks,
Sean

Problem with html link in my jsp----Not showing

Hii frnd ,i m trying to put a <hhtml:link> tag in my jsp ,
the tag is not showing up.
Wht can be the possible reason for tht.

You would probably increase the chances of getting a reply if you posted the code you use. There could be a hundred different reasons.

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          6/12/2014 12:48:19 PM
Event ID:      11551
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11551</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
    <EventRecordID>1945680</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>MyManagementServer</Computer>
    <Security />
</System>
<EventData>
    <Data>MyManagementServe</Data>
    <Data>0x800706BA</Data>
    <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Item not showing in Pick and Pack manager

Hello All,
One of the user added GRPO with 5 Items, but in Pick and Pack manager I can see only 4 Items from that GRPO.
Can anyone help to find out the cause for this.
Regards,
Hitul

Hello All,
Following is the screenshot of GRPO, SO and Pick and Pack manager.
Item no. 26105-003 is not showing in the Pick and Pack manager. all other items are there.
Regards,
Hitul

Third party Certificate not showing up in SQL configuration manager drop down box

Hi,
I have an SQL instance that needs to use a third party SSL certificate for all communications to that SQL instance. I have installed my third party certificate via MMC and it is showing under the Personal Folder.
However, when i go into the SQL configuration manager and right click the instance name > Properties > Certificates, it is not showing in the drop down box.
I am currently using MS SQL Server 2008 R2, which is installed on Windows Server 2012.

Hi,
If the certificate cannot be used for SQL Server and hence will not be visible in SQL Configuration manager. Check the validity of the installed certificate. It may not has the correct DNS name.
I suggest you request a new third party certificate from the vendor with the correct DNS name. Install it on SQL Server environment, then you should see certificate form the configuration manager dropdown box.
Thanks.
Tracy Cai
TechNet Community Support

PCs not showing in Collection/Queries Config Manager 2012 R2 - Direct Rule

Hello,
I have been creating some collections and queries using a direct rule or manual entry of the device and the PC is not showing in the collection.
Example: Created collection for a .NET 4.5.2 install that I rolled out. Manually added the devices that need the application and of the 40 PCs 2 or 3 will not appear in the collection, thus they are not getting the software push. The PCs
that are not showing up are pinging able and I can RDP into them just fine. Config Manager shows they have the Client, are active and getting policy requests.
I thought maybe it there was an issue with the collection I was creating but I tried adding the same PCs to other collections and they do not appear in those collections either.
I did a manual query as well with the same results, the same PCs I try to add to the collections are not showing in my query even though they are hard coded in.
Thanks
Rich

I deleted the collection for our "Insurance Department" which the suspect PCs were in. I no longer needed the Insurance collection so I deleted that just to see if that was limiting the .NET collection. Now those PCs are showing in
the ".NET 4.5.2" collection.
That is good and everything but going forward I will need to have a collection for the "Insurance Department" that will be based on a query that looks for our Insurance Application in Installed Applications64. How can I prevent this new collection
from limiting any PC in that collection from being put into other Software Install collections?
Thanks for the help thus far.

After Effects is not showing up on adobe application manager?

I recently got adobe creative cloud so that i could use Adobe's programs, especially After Effects. But when i downloaded the application manager Adobe After Effects does not show up on it. what should i do?

I looked through my system requirements and i didn't see anything wrong with them, they seemed to fit the description
Processor: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz 3.07 GHz
Installed memort (RAM): 4.00 GB (3.50 GB usable)
system type: 32-bit operating system

After loading, why does adobe flash not show up in add on manager - using firefox 5.0

Loaded adobe flash 10.3.181.34 and it worked fine. However, it does not show up in Firefox add-on manager - using Firefox version 5.0. Running win xp pro sp-3

shows up as shockwave not flash

Labels Not Showing Up Correctly in Workflow Manager Web Page

I have installed the Workflow Server 2.6.3 on Red Hat 7.2 against the Oracle 10g database. When I go to the Workflow Manager web page and login, all the labels appear between brackets "[]" and have incorrect names such as the following:
WF_WORKFLOW_TITLE
WFA_WTITLE
OPEN_NOTIFICATIONS
WFA_FINDTITLE
WFRTG_FIND_TITLE
etc......
I ran the Configuration Assistant again and this didn't solve the problem and I've also verified that the mappings in the server configuration file are correct for OA_JAVA, OA_DOC, OA_MEDIA. Looked through workflow installation log and no errors appear. I installed the web server (Oracle Apache Standalone downloaded from OTN in a separate Oracle Home). Any ideas how to fix these incorrect labels or why they're not showing up correctly??
Thanks in advance,
Rich

Hi,
I've not seen the problem myself, but it seems that the language has not created the correct lookups in the WF_RESOURCES table.
If you look for a name of (for example) 'OPEN_NOTIFICATIONS', there should be an entry for the language you are using (US) which translates the prompt for you. If it's not there then you will probably need to add a language through the installer - I don't think there is a SQL file that you can just run to do it. Alternatively, install it in a new environment and then just extract the resources you need from that system and insert them into this one.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Add table list does not show database view in Configuration Manager

Hi,
I am trying to add a database view in the table tab of the configuration manager. The view does not show up in the list of available tables in WCM 11.1.1.6 version. This is possible in the 11.1.1.4 version. Anyone else facing this issue?
Thanks
Soumya

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

CCADStatus.jsp not showing up (Analysis Engine Daemon Manager)

Similar Messages

Maybe you are looking for