CCMS Method doesn't changed

In NetW, basis 4.6c NQA system, I having prblem in CCMS method does't changed when I was tyring to go RZ20 and select MTE
SAP CCMS Monitor Templtes
   Entire System
      Application Server
         Operating system
            FileSystem
select anyone MTE from filesystem... and get properties then select METHOD TAB its shows auto-recation method : Z_NSM_CCMS_OnAlert_Eamil_V2
My question is when I changed mode, and tyring to define my own method which is I created in RZ21 NQA_CCMS_OnAlert_Eamil and saved
After that when I back to properties in same screen, I didn't see any changed, it keep show Z_NSM_CCMS_OnAlert_Eamil_V2 agian...
Remember! That when I look at it "Z_NSM_CCMS_OnAlert_Eamil_V2" in RZ21 I didn't find that method, but this method does exist in Solution Manager...
I am not sure why its not change when I saved my setting, I hopefully you understand that my question...
Thanks in Advanced
J

Hi,
sorry for asking question, where may I found that entry Z_NSM_CCMS_onAlert_Eamil_V2, as you know i am working in R3 QA system 620 and 4.6C, I didn't see in assignment from Technical Infrastructure menu in QA system...
YES, we do have that option in XDV Exchange infrastructure system in RZ21 Technical Infrastructure menu (Central auto recation screen even I didnt see that method in there like Z_NSM_CCMS_OnAlert_Eamil_V2"
As you maintion that option in <system SID > MTE Class < Assigned central autoreactions
but i didn't see that
If you want i can sent screenshot
Please help
Thanks
Edited by: issue2008 issue on Aug 15, 2008 9:41 AM

Similar Messages

  • Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

    Hello!
    The central autoreaction method doesn't work for the satellite system
    NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
    works fine and e-mail alerts are coming.
    The configuration steps I've checked:
    1. Configured SCOT. The mail_send job executes every 5 minutes.
    2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
    central CEN/000/DDIC and satellite system SAT/000/DDIC)
    3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
    (Only in central system CEN/000/DDIC)
    4. The sapccm4x-agent registered as web service within CEN using
    Create Remote Monitoring for NW 7.10:
    Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
    5. Created a new autoreaction method by copying method
    CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
    Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
    Execute Method on Any Server and Only in Central System, triggered by
    CCMS agents
    SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
    SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
    6. Got MTE Classes from NW 7.10 satellite system and assigned this method
    Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
    satellite system. The alert is red right now.
    7. The mail_send job doesn't send anything, in SCOT there are no
    sending orders.
    8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
    CEN_CHECKED.
    9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
    in manual the alert status changes to ACTIVE, but no email and no
    messages in sending orders in SCOT.
    Please help me to solve this issue.
    Thank you!

    Hi,
    Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
    Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
    Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
    if yes , that means there is problem in either SCOT configuration or distribution list.
    If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
    Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
    Regards,
    Rupali

  • I cannot figure out how to make the text larger on an incoming email.  The finger method doesn't work and I cannot find any toolbar with which to do it.  I could find nothing in settings also.  Plese help and thank you.

    I cannot figure out how to make the text larger in a received email.  The finger method doesn't work and I can find no tool bar as I can for composing emails.  I can find nothing in settings.  Please help and thank you in advance.

    Hi there,
    Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
    Good wishes,
    John.

  • Reload a method for a change to take effect ?

    I've got 1 object which has 1 button and 1 label.
    The containt of the label is stored in a text defined in the constructor.
    When I press the button I want this text to change.
    So I change the containt of the variable text in the action of the button. But it doesn't change anything. The text stay the same.
    Is there any way to reload the label for this change to take effect ?
    I would appreciate your help,
    Olivier.

    try the validate() method. It should redo the gui stuff after it has changed. And read the api too.

  • ISDN doesn't change to state up - only after reboot

    Hi,
    i've a router 2801 with the card VIC2-2BRI, i've this problem:
    when i plug-in in ISDN cable on the BRI interface the interface BRI doesn't change the state to up, it seems that the cable is not connected.
    I need to reboot my router with the ISDN cable plugged in, and when the router starts, the BRI interface is active.
    anybody know how to solve this problem?
    This is my ISDN bri configuration:
    network-clock-participate wic 3
    interface BRI0/3/0
    no ip address
    isdn switch-type basic-net3
    isdn point-to-point-setup
    isdn incoming-voice voice
    isdn bind-l3 ccm-manager service mgcp
    isdn sending-complete
    voice-port 0/3/0
    output attenuation 10
    echo-cancel coverage 32
    no vad
    compand-type a-law
    cptone IT
    it use MGCP protocol to comunicate with my callmanager.
    thanks in advance,
    Claudio.

    Try:
    http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
    http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800swcfg/provisio.htm

  • My weather doesn't changes according to time

    My weather doesn't changes according to time as after 12:00 am it will remain the same day

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    Also, the US daylight saving time starts tonight. Sometimes the iOS has problems around DST

  • Payment method declined.Please change your payment method

    Hello
    I have an iPad and an iPod,I am 15 years old so my uncle gave me his credit card,everything was awesome,I have been buying stuff free and paid for years and recently I have been receiving this problem "Payment method declined.Please change your payment method" .. Whenever I wan't to download an app either it is for money or free or even when I want to update an app that I have already downloaded a message saying "sign in required" I put my password again and the a message appears "there was a problem with the previous purchase,please update your payment information" I update the information and I am sure that the credit card is all good and filled,and I enter the information right even though the only bar empty was the Security code,anyway when I finish everything I tap done,but then it tells me "Payment method declined.Please change your payment method",I did everything,log out log in,waiting,trying over and over,but it didn't work,this problem happened a long time ago but unlikely it was fixed two days later,now I am facing this problem and I don't know how to fix it.I have seen lots of other threads that discuss this problem,but my problem is that I live in Jordan-Middle East,which is a problem because as one said was the solution is to change the credit to "none" and then return it back,I can't do that,because for some reason there is no "none" option in the page displayed,and for the other one who said to enter from store.apple.com and enter the billing information again,that won't work for me either because I can't find except "apple.com/us" >:(, I can't log in to my account in jordan while there's nothing but us app store on PC.
    For god's sake someone help me out,I am really ****** off of this,I can't find a way to even send an email to apple .. can anybody help? it will be appreciated a lot.. I want help fast,I can't change my account because I have already bought a lot of apps (with money) and I can't just let the money worth go away :/
    If anyone can help (not discuss and complain and tell me sorry) it will be very awesome,because I have no much more to do about this and now I am trying to reach for help
    Thank you.

    We are users like you. There is nothing we can do about the credit card. Call the credit card company and ask them why the purchases have been decined. They will know for sure and will be able to tell you. Wait, it is not your credit card. Who ever is the account holder will need to call the credit card company.

  • The html container doesn't change size according to the width of the website, but instead the width of the window.

    As stated. The html container doesn't change to match the content on the website (like Internet Explorer does), it changes to match the screen size. That way, when you scroll horizontally, elements disappear because the html container is the size of the screen and in a fixed position.
    Example (my problem): http://www.elitepvpers.com/forum/web-development/1847846-question-css-html-width-problem.html
    Happens with most websites such as...
    http://google.com/
    http://co.91.com/index/
    http://www.w3schools.com/
    http://stackoverflow.com

    locked by moderator as dulicate

  • LVOOP "call parent method" doesn't work when used in sibling VI

    It seems to me that the "call parent method" doesn't work properly according to the description given in the LabVIEW help.
    I have two basic OOP functions I am doing examples for. I can get one to work easily and the other one is impossible.
    Background
    There are 3 basic situations in which you could use the "call parent method"
    You are calling the parent VI (or method) of a child VI from within the child VI
    You are calling the parent VI (or method) of a child VI from within a sibling VI
    You are calling the parent VI (or method) of a child VI from a different class/object.
    From the LabVIEW help system for "call parent method":
    Calls the nearest ancestor implementation of a class method. You can use the Call Parent Method node only on the block diagram of a member VI that belongs to a class that inherits member VIs from an ancestor class. The child member VI must be a dynamic dispatching member VI and have the same name as the ancestor member VI
    From my reading of that it means situation 3 is not supported but 1 & 2 should be.
    Unfortunately only Situation 1 works in LabVIEW 2012.
    Here is what I want
    And this is what I actually get
    What this means is that I can perform a classic "Extend Method" where a child VI will use the parent's implementation to augment it's functions BUT I cannot perform a "Revert Method" where I call the parent method's implementation rather than the one that belongs to the object.
    If you want a picture
    Any time I try and make operation2 the VI with the "call parent method" it shows up for about 1/2 sec and then turns into operation.
    So there are only 3 possibilities I can see
    Bug
    Neither situation 2 or 3 are intended to work (see above) and the help is misleading
    I just don't know what I am doing (and I am willing to accept this if someone can explain it to me)
    The downside is that if situation 2 above doesn't work it does make the "call parent node" much less usefull AND it's usage/application just doesn't make sense. You cannot just drop the "call parent node" on a diagram, it only works if you have an existing VI and you perform a replace. If you can only perform situation 1 (see above) then you should just drop the "call parent node" and it picks up the correct VI as there is only 1 option. Basically if situation 2 is not intended to work then the way you apply "call parent method" doesn't make sense.
    Attachements:
    For the really keen I have included 2 zip files
    One is the "Revert Method labVIEW project" which is of course not working properly because it wants to "call parent method" on operation not operation2
    The other zip file is all pictures with a PIN for both "Revert Method" and "Extend Method" so you can see the subtle but important differences and pictrures of the relavant block diagrams including what NI suggested to me as the original fix for this problem but wasn't (they were suggesting I implement Extend Method).
     If you are wondering where I got the names, concepts and PIN diagrams from see:
    Elemental Design Patterns
    By: Jason McColm Smith
    Publisher: Addison-Wesley Professional
    Pub. Date: March 28, 2012
    Print ISBN-10: 0-321-71192-0
    Print ISBN-13: 978-0-321-71192-2
    Web ISBN-10: 0-321-71255-2
    Web ISBN-13: 978-0-321-71255-4
     All the best
    David
    Attachments:
    Call parent node fault.zip ‏356 KB
    Call parent node fault.zip ‏356 KB

    Hi tst,
    Thankyou for your reply. Can you have a look at my comments below on the points you make.
    1) Have to disagree on that one. The help is unfortunately not clear. The part you quote in your reply only indicates that the VI you are applying "Call Parent Node" to must be dynamic dispatch. There is nowhere in the help it actually states that the call parent node applies to the VI of the block diagram it is placed into. Basically case 2 in my example fulfills all that the help file requires of it. The dynamic dispatch VI's operation are part of a class that inherits from a given ancestor. Operation 2 for Reverted behaviour is a child VI that is dynamic dispatch and has the same name as the ancestor VI (operation2). The help is missing one important piece of information and should be corrected.
    2) True it does work this way. I was trying to build case 2 and had not yet built my ancestor DD for operation so the function dropped but wasn't associated with any VI. I was able to do this via a replace (obviously once the ancestor Vi was built) so this one is just bad operator
    3) Keep in mind this is an example not my end goal. I have a child implementation because this is a case where I am trying to do a "reverse override" if you like.
    3a) The point of the example is to override an objects method (operation2) with it's parent's method NOT it's own. The reason there is a child implementation with specific code is to prove that the parent method is called not the one that relates to the object (child's VI). If I start having to put case structures into the child VI I make the child VI have to determine which code to execute. The point of Revert method is to take this function out of the method that is doing the work. (Single Use Principal and encapsulation)
    3b) The VI I am calling is a Dynamic Dispatch VI. That means if I drop the superclass's VI onto the child's block diagram it will become the child's implementation. Basically I can't use Dynamic Dispatch in this case at all. It would have to be static. That then means I have to put in additional logic unless there is some way to force a VI to use a particular version of a DD VI (which I can't seem to find).
    Additional Background
    One of the uses for "Revert Method" is in versioning.
    I have a parent Version1 implementation of something and a child Version2. The child uses Version2 BUT if it fails the error trapping performs a call to Version1.
    LabVIEW has the possibility of handling the scenario but only if both Case 1 and Case 2 work. It would actually be more useful if all 3 cases worked.
    The advantage of the call parent method moving one up the tree means I don't have the track what my current object is and choose from a possible list, if, for example the hierarchy is maybe 5 levels deep. (so V4 calls V3 with a simple application of "call parent method" rather than doing additional plumbing with case structures that require care and feeding). Basically the sort of thing OOP is meant to help reduce. Anything that doesn't allow case 2 or 3 means you have to work around the limitation from a software design perspective.
    If at the end of the day Case 2 and case 3 don't and won't ever work then the help file entry needs to be fixed.
    All the best
    David

  • Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art?

    Some of the album artwork on my iPod is wrong. I've tried to change it many times but it doesn't change. I've decided that the easiest thing to do now would be to NOT display album artwork on my iPod. How do I set my iPod to NOT display album art? I've checked the User manual and that doesn't help.

    Why don't you, instead of taking time to do that, just backup, and then restore your iPod?
    Just a suggestion..

  • Set Busy cursor doesn't change until mouse is moved

    Hello,
    When I use the "Set Busy.vi" to control mouse cursor appearance, it doesn't actually change until the pointer is moved. Similarly, the "Unset Busy.vi" doesn't change appearance until the mouse is moved. Is there a way to fix this?
    Thanks,
    -Dave

    Hi Dave,
    I've tried this and it seems to work okay for me... do you have any example code you can post? Which version of LabView are you using?
    Charlie Rodway
    Test Design Engineer
    Rolls-Royce Controls and Data Services Ltd

  • My ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

    my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?

    Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?

  • Changing resolution and image size doesn't change result on screen?

    I'm using Photoshop CS3. I am trying to change the resolution of several images that will be printed in a newspaper. So the current images are 72 ppi and really huge -- for example 36 x 27 inches (document size), and when I change them to 300 ppi, the image sizes shrink to about 8 x 6 inches, as I expect. But the image I see on the screen doesn't change. So, for example, when I open up the image originally, it's at 33% and the entire image is visible. After I change the resolution, and the image size has changed accordingly, the image still appears the same and it remains at 33%. Shouldn't the image shrink on the screen since its size has shrunk? Or if it remains the same on the screen, shouldn't the percentage shift? I mean if the document size is now 8 x 6, it should be able to be displayed at 100% and not fill my whole screen... I'm so confused. Thanks...

    gradded,
    The "Document Size" area of the Image Size dialog is just to indicate the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor doesn't care anything about ppi. The monitor contains a certain number of pixels and after you change that ppi setting, the monitor will still have that same number of pixels.
    As long as you leave the "Resample Image" box unchecked, your image size (Pixel Dimensions) will not change. You will see no change on your monitor. If you check the "Resample Image" box, then your image size (in pixels) will change.
    Hope this helps.

  • This app tab feature doesn't work for me: "Links to new websites open in a new tab so that your App Tab doesn't change".

    I installed the new firefox 4 browser today. In the description about the new app tab the following feature is claimed:
    "Links to new websites open in a new tab so that your App Tab doesn't change."
    This doesn's seem to work for me. When I click a link in an app tab i just get redirected and my app tab changes. Is this a bug or a setting?

    This is what the article here claims you need mobile share plan to work.
    It shows it will work fine over wifi.
    http://www.ubergizmo.com/2013/03/bbm-video-chat-on-att-will-require-a-mobile-share-plan/

  • When i change permission of folder why it doesn't change the permission inside that folder?

    When i change permission of folder why it doesn't change the permission to inside  files of that folder?

    have to select "apply to enclosed items" options

Maybe you are looking for