CCMS registering

Hi all,
while registering the ccms agent through the visual admin , after entering the admin user and then the CSMREG user details its givin the error the service SAPCCMS service canot be started. i tried manual restart also . but  its again of no use.
any suggestions or advice..:)
regards,
Rahul.

Hi Rahul,
     Check these links, it may help you out:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b2548389-0901-0010-3486-f511248c428b [original link is broken] [original link is broken]
Regards,
Subhasha Ranjan

Similar Messages

  • Problems in conference bridge after migrating to 4.1.3SR3 from 4.1.3

    very recently i upgraded my CCM from 4.1.3 to 4.1.3 SR3. i use 3725 with DSP farm as conference bridge ( the ios code on 3725 is 12.3.11 T7 )
    the conferencing stopped working for me as soon as press conference on my after callint the 2md party, both my calls get dropped.i see that the CCM registers the bridge and also in SCCP config of gateway i see the CCM registered.
    for testing purpose i configured one my 3845( with same version) over WAN as my conference bridge and then conference worked fine for me.
    there are few command difference in 3725 and 3845 . In 3845 i can configure CCM version as 4.1 and in 3725 i can do only 3.1 or greater. i am not sure if this is problem or not.
    in CCM traces i got this unusal error which is attached
    please let me know any pointers on this
    thanks
    manish

    We are also having the same issue, 3725 used as conf resource, as soon as we press conf button all calls are dropped with fast busy. we are using CM 3.3.5 and IOS 12.3.7T12.
    cisco TAC poked around and could not find anything wrong with config (of course, we have other sites with identical config all working ok). so they said it must be bad DSPs even thou there are no DSP errors on the router. i doubt it is DSP issue but i'll let you know when TAC figures it out.

  • Gatekeeper Drop First Digit

    Hi
    I have a gatekeeper with multilple CCM registered and also Multiple PSTN gateways.
    When a call to the PSTN is dialed it is prefixed with a 9 but the plans on the gatekeeper dont have a 9 as on inbound calls there is no 9.
    Is there a way i can drop the 9 on calls from the CCM when the gatekeeper decides where to route the call without having 2 copies of the number?
    example of my zone prefix. It does not match the call outbound as there is no 9, but i need the 9 to be there when it hits the other gateway.
    zone prefix gk-ht-zn-ccm-01 0845123222* gw-priority 10 N4-DRY-HOST-VGW-RL_1 N4-DRY-HOST-VGW-RL_2
    Thanks
    Andy

    Hi Andy,
    Unfortunately, gatekeepers don't manipulate digits - they basic just resolve phone numbers to IP address.
    You'll need to translate the dialed number on the inbound voip leg dial-peer of the gateway.
    HTH,
    Michael

  • H.323 Gateway is not Registering in CCM 4.1.2

    H.323 Gateway. I am using cisco2620
    ========================================
    nafay#sh run
    Building configuration...
    Current configuration : 966 bytes
    version 12.2
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    hostname nafay
    ip subnet-zero
    mgcp
    mgcp call-agent 192.168.0.111
    mgcp dtmf-relay codec all mode out-of-band
    call rsvp-sync
    voice class h323 1
    h225 timeout tcp establish 3
    ccm-manager mgcp
    interface FastEthernet0/0
    ip address 192.168.0.55 255.255.255.0
    duplex auto
    speed auto
    interface Serial0/0
    no ip address
    shutdown
    ip classless
    ip http server
    voice-port 1/0/0
    voice-port 1/0/1
    voice-port 1/1/0
    voice-port 1/1/1
    dial-peer cor custom
    dial-peer voice 100 voip
    preference 1
    destination-pattern 1...
    voice-class h323 1
    session target ipv4:192.168.0.111
    dtmf-relay h245-alphanumeric
    ip precedence 5
    dial-peer voice 101 voip
    preference 2
    destination-pattern 1...
    session target ipv4:192.168.0.111
    dtmf-relay h245-alphanumeric
    ip precedence 5
    line con 0
    line aux 0
    line vty 0 4
    end
    nafay#
    =========================================

    Is this config is OK. Still not registering
    =====================================================
    service timestamps debug uptime
    service timestamps log uptime
    hostname nafay
    ip subnet-zero
    call rsvp-sync
    voice class h323 1
    h225 timeout tcp establish 3
    interface FastEthernet0/0
    ip address 192.168.0.55 255.255.255.0
    duplex auto
    speed auto
    interface Serial0/0
    no ip address
    shutdown
    ip classless
    ip http server
    voice-port 1/0/0
    voice-port 1/0/1
    voice-port 1/1/0
    voice-port 1/1/1
    dial-peer cor custom
    dial-peer voice 100 voip
    preference 1
    destination-pattern 1...
    voice-class h323 1
    session target ipv4:192.168.0.111
    dtmf-relay h245-alphanumeric
    ip precedence 5
    dial-peer voice 101 voip
    preference 2
    destination-pattern 1...
    session target ipv4:192.168.0.111
    dtmf-relay h245-alphanumeric
    ip precedence 5
    line con 0
    line aux 0
    line vty 0 4

  • Error while registering the CCMS agent

    Dear All,
    When i am trying to register the SAPCCM4x agent in my landscape i am getting the error "104 RFC_ERROR_SYSTEM_FAILURE'
    can anyone tell me the what are the possible reason for this error and solutions to resolve.
    and
    what authorisations for the CEN user and RFC connection should exist before registering the CCMS agent.
    It will be great help if you comment on this,
    thanks & regards,
    Krishna Joish

    Hi Krishna,
    Please check for the authorization object S_RFCACL for the RFC user.
    Check the RFC connection properly.
    Please elaborate the error if it persists.
    Regards,
    Sunny

  • Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895 Problem installing sccm 2012 client

    Hi,
    I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
    <![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
    context="" type="3" thread="8096" file="msiutil.cpp:300">
    <![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
    <![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
    ExitCode: 1603
    Action: SelfRegModules.
    ErrorMessages:
    Module C:\Windows\CCM\StatusAgentProxy.dll failed to register.  HRESULT -2147010895.  Contact your support personnel.
    I've already checked this forum but nothing helped .
    Please provide a valid action plan to resolve this issue.
    I'd highly appreciate any help.
    Thanks and regards
    Arsalan

    Hi,
    Restart those server might be helpful.
    After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CCMS agent is not registered at central CCMS system

    Hi,
    I have standalone DB (AIX) and CI (AIX) with 4 application servers. (only Abap  - unicode system)
    In CI sto6 and OS07 i am not getting any info regarding DB server and also in EWR in solution manager.
    I came to know that ccms agent not registered.
    plz help in CI which client i want to create the user csmreg and config file.( in 000 or working client)
    After creating config file in which path should i copy the config file in OS level in AIX.
    and how to start it.
    Please suggest me.
    Thanks,
    Hari

    Hi,
    Check below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
    Thanks
    Sunny

  • CCMS agent not getting registered

    Hello,
    No activities carried out on Solman 7.1 & managed system CRM 7
    As I was getting error in RZ21 of solman for agent of our CRM7 system while testing connection,I was trying to re-register sapccm4x agent on managed system CRM 7
    So first I stopped the current sapccm4x agent on CRM7 & de-registered it & re-registered which solved one problem of "hostname unknown"
    But instead started giving new error shown below :
    ERROR: can't register at SOLMAN. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
    RFC Error Info for SALF_CSM_AGENT_REGISTER
    message: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
    status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
    CSMREG user in SOLMAN 000 has this role SAP_BC_CSMREG assigned & it works fine for all other managed systems.
    Kindly request your help  to solve this problem & sapccm4x agent registered.
    Thanks
    Shradha

    Hi Shradha,
    1. what is the version of ccms agent.
    2. what is the SAP_BASIS component level and patch level.
    3. add   SALF_CSM_AGENT_REGISTER   into SAP role   SAP_BC_CSMREG
    With Regards
    Ashutosh Chaturvedi

  • CCMS Agent configuration register button

    Dear Experts,
    I am trying to configure ccms agent at remote system for central system through visual administrar at remote monitor system . I have copied the csmconf file to its location and giving the password of administrator user and CSMREG user but register button is not highlighted .
    I have copied the file csmconf created at CEN system to remote monitoring system .
    Pl. advice .
    Thaks in advance .
    Regards
    Kaja S

    Hi Kaja
    Please check if the following links help you:
    http://help.sap.com/saphelp_nw04/helpdata/en/b7/95ae409567912ae10000000a155106/content.htm
    and
    http://help.sap.com/saphelp_nw70/helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
    Regards
    Chen

  • Registering a CCMS Agent  on MDM

    hello All,
    could anybody help me  to know the procedure for registering CCMS agent on MDM ....

    Hi,
    You can refer following link
    https://websmp208.sap-ag.de/~sapidb/011000358700003240702001E.
    you need a S UserID  for this link
    Reward points if helpful
    Regards
    Nisha

  • Why we dont' see H323 gateway and SIP trunk "registered" in CCM?

    in CCM admin, we see the status of H323 gateways and SIP trunks have no "registered to xxxx" status.

    Unlike devices with other protocols, there is no registration mechanism for these.

  • IPVC-3515-MCU12 cannot register CCM 4.1(3)

    We've got the IPVC-3515-MCU12 with version 5.5.0.0.54 to integrate with CCM using SCCP. But, we find CCM cannot register it. Is there any configuration setting need to aware for it?

    How did you set the MCU in the Call Manager? As Conference Bridge? or not?. In the MCU have yoy enable the SCCP protocol?

  • Cannot register MGCP gateway to CCM 4.1

    Hello,
       I am running an application which simulates a MGCP gateway vs. a real CCM 4.1. I am not able to register the endpoints as you can see from the snapshot attached. I guess the problems lies in the 200 response to the following AUEP:
    AUEP 89 AALN/S0/SU0/[email protected] MGCP 0.1
    F: X+SRTP/A
    200 89 OK
    X: 2
    L: p:20, a:PCMU, b:64, e:ON, s:ON
        I have also attached the trace file and CCM logs.
       I have 2 questions on this matter:
    what is the correct format of the 200 message which needs to be sent to AUEP with SRTP?
    how can I configure CCM not to sent this AUEP with SRTP(I have a similar one in my setup which is not sending this AUEP)?
    Thanks in advanced for you support,
    Ionut

    Restrictions for Cisco Multiservice IP-to-IP Gateway Configuration:
    Restrictions for SIP-to-SIP Call Signaling:
    Transcoding is not supported.
    SIP-to-H.323 Call-Signaling Features:
    Codec transcoding (G.711-G.729) - supported
    other:Transcoding is not supported on the Cisco 7200 and the Cisco 7301
    copied from:cisco Multiservice IP-to-IP Gateway
    http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_guide_book09186a0080409b6d.html
    I have not found a solution, but i'd be interested in what you find though.

  • CCM won't register IP Phone

    Hi I'm running CCM4.0(2a)sr2a. When I attempt to register any phones(7960) After the phone goes thru VLan Config etc.. I end up with Registration Rejected and it just hangs there? Can anyone help me?
    Thank you in advance

    Do you have your CCM server setup for auto registration? Did you preconfigure your phone in CCM before booting? I ran into this problem recently and found I hadn't turned on auto registration on my cluster. I set it to 25 extensions. Then I just search for the extension and make any necessary changes. Just remember to nuke the UnassignedDNs every now and then, so you don't use them all up.

  • Error 1904. Module C:\Windows\SysWOW64\CCM\x64\ccmcore.dll failed to register. HRESULT -2147024703. Contact your support personnel.

    I'm getting this error while installing client on server 2008 Sp1 box.
    Steps i tried:
    1.I did try manually registering oringinally but when the client fails to install, it removes all the source files including the ccmcore.dll.   So, ccmcore.dll doesn't reside on the system after failing to install the client or at least not that
    I can see. 
    2. I have tried timing it just right so that my "regsvr32 ccmcore.dll" is run during the install process while the file is in the CCM folder but that didnt work either.
    3. I had manually created the directory CCM\x64\ccmcore.dll and copied the file from a working client and try to register but it gave me an error "  Failed to load .dll"
    4. i have tried uninstalling the client from ccmclean as well but no luck.
    I'm running SCCM 2007 Sp2 native mode and trying to manaully install the client.
    Please help?

    *complete...

Maybe you are looking for