Gatekeeper Drop First Digit

Hi
I have a gatekeeper with multilple CCM registered and also Multiple PSTN gateways.
When a call to the PSTN is dialed it is prefixed with a 9 but the plans on the gatekeeper dont have a 9 as on inbound calls there is no 9.
Is there a way i can drop the 9 on calls from the CCM when the gatekeeper decides where to route the call without having 2 copies of the number?
example of my zone prefix. It does not match the call outbound as there is no 9, but i need the 9 to be there when it hits the other gateway.
zone prefix gk-ht-zn-ccm-01 0845123222* gw-priority 10 N4-DRY-HOST-VGW-RL_1 N4-DRY-HOST-VGW-RL_2
Thanks
Andy

Hi Andy,
Unfortunately, gatekeepers don't manipulate digits - they basic just resolve phone numbers to IP address.
You'll need to translate the dialed number on the inbound voip leg dial-peer of the gateway.
HTH,
Michael

Similar Messages

How to retrieve the first digit of a number

Hi,
In my smartform (PO Form)I have to check a condition with respect of the first digit of company code. To be more clear i need to check that if the first digit of the company code is '1' (like in case of 1000, 1002, 1003 & so on) then my PO should be a 3rd party consignment. how do i do that?

Hi,
thanks for ur quick reply.
but i just wanted to verify that can i use this condition directly under the condition tab of my smartform as i never used like this.
Now i have put the condition like IS_EKKO-BUKRS+0(1) = '1'
And one thing to let u know that the filed size of company code is always same. i.e.4

When I sort a column of figures, it sorts by the first digit. How do I get it to sort by the whole number?

I have a column of numbers, Specifically: 5.2, 42.0, 25.5, 2.4, 11.8, 0.9, 0.5. Notice how it has sorted by the first digit, not the whole number. In other words 5.2 is ranked higher than 42, because 5 is larger than 4. What do I turn on or off to make it behave sensibly?
Any answers would be appreciated.
Martin

Hi Martin,
Are the cells formatted as Text (left aligned, as in Column B)?
Data Format in Column C
Column C will sort as Number.
Regards,
Ian.

First digit disappears

I am facing a peculiar situtation in our multiple forms application. The situation is like this-
In form A I have a text field named TEXT1 with data type as number.I navigate from form A to Form B and perform some update in Form B. After this I come back to Form A and type a number in the field TEXT1. The first digit that I type in this field almost always disappears. If I do not perform any update in form B this does not happen and things work fine. I am messing up something that I am not aware of.
Does any body have any clue?
Thanks for help.

I've experienced this peculiarity sporadically as well. From what I can tell, sometimes it does this: you navigate to the text item, you enter first char, magically this char gets selected, next char you write replaces selection and from there on everything seems normal.
I think it's a bug in the java gui part, and some of these things have gotten better with new Jinitiators. 1.3.1.8 on Unix was horrible, 1.3.1.9 (windows) was better and I don't see it happening (much?) with 1.3.1.13 (also on windows).
Some people tend to experience it more often than others. I've hypothesized somewhat about mouse drivers and that sort of thing ...?
Regards,
Jesper Vad Kristensen

Dropping first product from vendor punch-out catalog

Hi,
We are having classic scenario implemented with GOA on SRM server 5.5 and support pack 9 with CCM2.0.
Currently we are facing an issue for one vendor punch-out catalog. When we are choosing multiple products from vendor catalog,it is dropping first product and bringing remaining products in the shopping cart. We have checked OCI mapping , it looks fine . I have also checked all configuration for catalog call structure. Can anyone answer what could probable reason for this issue?
Thanks in advance.
Regards,
Umesh

Hi,
This issue resolved after vendor inbound OCI format.
Regards,
Umesh

Limit the amount of characters of a text field based on first digit

Hello and thanks in advance for your help!
I would like to limit the amount of characters of the text field based on the first digit of the number (the text field is only limited to a number format...no decimals, no commas).
For example, if the number begins with a 3, I would like to limit the text field to allow only ten characters. I have three scenarios but if I could get started with some code and what is the best place to add it (keystroke or validation?) I can take it from there. Thanks again for your help!!

I've written this code for you that does that. Use it as the field's custom Keystroke code:
// Validate that only digits are entered
if (event.change) {
    event.rc = /^\d+$/.test(event.change);
// Validate string length if it starts with 3
if (/^3/.test(AFMergeChange(event))) {
    event.rc = AFMergeChange(event).length <= 10;
    if (!event.rc) app.alert("If the number starts with \"3\" it may not be longer than 10 digits.",1); // optional error message
You can duplicate the second part of it for additional conditions, but keep in mind that this code won't even let you remove the first character in the field if the result is an invalid one.
For example, if you enter "234567890123456" then you can't remove the "2" at the start because that would result in an invalid number. You can remove any of the other digits, though, and when it's 10 digits or less then you could remove the starting "2" as well.

Zero a a first digit

How do you enter zero as a first digit in a cell? I want to enter zip codes and those from the east coast begin with zero.

W3,
Use Custom Format and set for 5 digits, no separator and "Show Zeros for Unused Digits"
Regards,
Jerry

"#" key as the first digit of site prefix code

The plan at present is to implement the centralized CCM cluster design with a main office and 10 remote sites in Asia where the first digit of site prefix code is "#" follows by two digits of country code and 4 digit internal extension. So that a remote site in Tokyo would be #816200. Can "#" key be used as first digit of site prefix code? Thanks.

Yes, you can use the # to route calls.

Allowing a zero as the first digit in an insert record form field

I have a form that has an insert record behavior applied to
it. I would like to be able to put a number into one of the form
fields that begins with the letter zero (i.e. 010507). The trouble
is that when I insert any number beginning with a zero, the first
zero in the number gets dropped when it is entered into the
database. This occured even when I tried changing the field type
from number to text in Access.

Oh, I failed to change the field type to "text" in the insert
record dialogue box as well.

Copy/Paste Dropping First Character

The first character is dropped every time I copy and paste a block of text in Word (2008) and Photoshop CS6, but strangely not in my email client or Google Docs. I am using an iMac running OS 10.9.5. Has anyone else ever encountered this, or does anyone have any suggestions for a remedy? Thanks!

http://forums.adobe.com/message/4248993

Bug: dropping first table collapses connection tree

Hi,
if you drop the first table in the table list, using the delete key, the entire connection tree is collapsed completely (i.e. reoppening the connection does not remember what was previously expanded in that connection).
It doesn't disconnect the connection though.
(919 on 9.2.0.6.0 db)
BTW the bug where the commit/rollback buttons aren't enabled with you add the first row to a one column table still exists.
regards,
William

Not that I am aware of; I just did the following:
create table a (a number);
refreshed the table tree
selected the table "a", and hit the delete key, followed by "yes" and the tree collapses.
Not sure what else I can add to that :)
I've just tried it a few times, and it happens every time on all my connections; it only happens if you drop the table with the delete key.
regards,
William

Asp drop - First TCP packet not SYN (tcp-not-syn)

I have many tcp-not-syn:
First TCP packet not SYN (tcp-not-syn) 46841247
For sure it is not a routing issue cause ie 10.32.3.230 usually can connect to 192.168.16.2 which is a proxy server. Sometimes it can't and I get the
tcp-not-syn error. So after a capture I got the following,
ASA# capture asp-drop type asp-drop tcp-not-syn
ASA# sh capture asp-drop | i 10.32.3.230
2397: 16:11:31.904295 802.1Q vlan#8 P0 10.32.3.230.2322 > 192.168.16.2.8080: R 556133793:556133793(0) win 0
2398: 16:11:31.905272 802.1Q vlan#8 P0 10.32.3.230.2322 > 192.168.16.2.8080: R 556133793:556133793(0) win 0
2400: 16:11:31.908583 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2401: 16:11:31.908613 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2402: 16:11:31.908629 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2403: 16:11:31.908659 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2404: 16:11:31.908766 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2405: 16:11:31.908796 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2406: 16:11:31.908812 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) ack 4258924744 win 0
2407: 16:11:31.909071 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2408: 16:11:31.909102 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2409: 16:11:31.909132 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2410: 16:11:31.910490 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2411: 16:11:31.910521 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2412: 16:11:31.910551 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2413: 16:11:31.910566 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2414: 16:11:31.911192 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2415: 16:11:31.911207 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2416: 16:11:31.911238 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2417: 16:11:31.915205 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2418: 16:11:31.915235 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2419: 16:11:31.915296 802.1Q vlan#8 P0 10.32.3.230.2321 > 192.168.16.2.8080: R 1839687588:1839687588(0) win 0
2420: 16:11:31.915327 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2421: 16:11:31.915357 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2422: 16:11:31.915815 802.1Q vlan#8 P0 10.32.3.230.2320 > 192.168.16.2.8080: R 55902087:55902087(0) win 0
2432: 16:11:33.102426 802.1Q vlan#8 P0 10.32.3.230.2317 > 192.168.16.2.8080: R 4189536219:4189536219(0) win 0
2433: 16:11:33.102457 802.1Q vlan#8 P0 10.32.3.230.2317 > 192.168.16.2.8080: R 4189536219:4189536219(0) win 0
2434: 16:11:33.102487 802.1Q vlan#8 P0 10.32.3.230.2317 > 192.168.16.2.8080: R 4189536219:4189536219(0) win 0
syslog message says:
deny tcp (no connection) from 10.32.3.78/1646 to 192.168.16.2/8080 flags RST on interface inside
The question is how can I define it is:
1. the proxy 192.168.16.2 itself is too slow responding to the syn packet sent from the client 10.32.3.78
2. a reset is sent by the proxy 192.168.16.2 and then forwarded by the ASA to the client 10.32.3.78
3. an idle timeout tuning needed on firewall
4. anything else
Thanks

Hi,
Since it is a RST packet coming from client IP destined to proxy server IP on ASA's interface (of course with no associated connection in ASA state table), ASA will drop it as first tcp packet not syn.
When a packet arrives on ASA, it checks to see if it belongs to an existing flow, if not, it has to be a new connection but since SYN flag is not set here, it gets dropped under above reason code.
Now, you would probabaly want to capture the entire traffic stream from client to server on ASA interface to understand what caused those resets. May be client sent some new requests (SYN's) and proxy was too busy to respond. Again, complete capture in pcap would be needed for further analysis.
Regards,
Sourav Kakkar

CCM 4.1 ad hoc conference drops first participant

Hi All,
Not sure if anyone can help here:
My problem is in one of my locations, when a user does an ad-hoc conference using the softkey, and they join another party in to the conference, the first dialled number is being dropped...
Has anyone come across this before? Any known fixes?
Thanks

Hi!
It could be caused by a codec issue. Check what codecs are you using between regions. Remember that if you are using a SW CFB it only speaks G.711 so probably you will invoke a XCODER. If the first user does not have a XCODER on the MRGL on his DP the call might fail.
Hope this helps.

Keyboard dropping first letter

My apples is starting to drop the first letter of everything I type no matter what I am in. If I go back then restart my typing it is ok. but the first letter is always missing when I begin. What is going on? Heard about this on an outside forum, does anyone have an idea of where to begin. I have the 27" Mac on the Safari.Thanks for the help.

welcome to macbook forum,
I never had that problem, maybe the first stroke count as a wake up call to the application.
Try to move mouse or touch the pad before start typing.
Good Luck

SQL Developer dropping first column in a SQL SELECT

Am not too certain who to report this to... but I just noticed that SQL Developer will not return the first column in a SELECT statement when there is a comment just after the SELECT reserved word when running the query in the SQL Worksheet. For instance:
SELECT -- > HEADER INFORMATION STARTS HERE <--
w.stu_id HDR_STU_ID,
w.wiser_id HDR_WISER_ID,
iep.wiep_id HDR_WIEP_ID,
sis.wisis_id HDR_WISIS_ID,
FROM wiser_exit exit
INNER JOIN wiser w
ON exit.wiser_id = w.wiser_id
INNER JOIN wiser_iep iep
ON w.wiser_id = iep.wiser_id
INNER JOIN vw_wiser_iep_sis sis
ON iep.wiep_id = sis.wiep_id
will just return columns 2 - 4 (HDR_WISER_ID, HDR_WIEP_ID, and HDR_WISIS_ID), and NOT column HDR_STU_ID.
I verified this by running the same query in SQL Commands in the SQL Workshop of APEX, and the resultset returned all the columns including HDR_STU_ID.
Just ran another quick test in SQL Developer, and get the same results from a SELECT against a single table:
SELECT -- > HEADER INFORMATION STARTS HERE <--
county_cd,
odd_even_flg,
street_name
FROM dime
Did not return the county_cd column.
I know, it's just a minor quirk, but I thought I would mention it.

John,
Thank you. I replaced the '--' comments with the '/*' '*/' style and it picked up the first column.
I guess I'll just have to break an old habit I've been doing for years for comments. Dang, I hope all that old code doesn't break...
Thomas
Spoke too soon. I followed up by checking what Oracle's 'Oracle Database 10g The Complete Reference' had to say about the issue of using '--' for comments and under '-- (Comment)' it says "-- tells oracle a comment has begun. Everything from that point to the end of the line is treated as a comment. These delimiters are used only within SQL itself or in PL/SQL ..."
So I guess I can continue using '--', but need to keep in mind that in certain circumstances it might not work as expected. YMMV
Edited by: Thomas 8246 on Feb 19, 2010 8:09 PM

Gatekeeper Drop First Digit

Similar Messages

Maybe you are looking for