Center HTML Report

Hi,
I want to know if is possivel to center the HTML generated by
Reports. I'm developing the report for a resolution of 800x600,
but if I want to view the report in 1024x786 the report is align
at left and not (as i want) at center.
Carlos Dias

Hi, Carlos
Please, try the following:
In the Navigator, select the report name and open the property
palette.
Under "Report Escapes", look for "Before Report Value" property.
Change it from
<html>
<body bgcolor="#ffffff">
to
<html>
<body bgcolor="#ffffff">
<center>
Now, look for "After Report Value" property.
Change it from
</body></html>
to
</center></body></html>
You might have to adjust the width of the report, under Layout
Model, Main Section.
Hope this helps,
Pedro das Neves
[email protected]

Similar Messages

Page break in html report

Hi all,
I am sending a report to external user e-mail id from SAP. The user is receiving the report in html format.
The user asks me they need a page break on the report after each customer data. I am wondering is it possible to have a page break in html report? If yes, how it is possible?

Hi,
I insist : it is not possible with HTML to insert Page breaks. BUT, Tammie is right! You can use CSS (Cascade Style Sheet) to insert page breaks thanks to few lines of code in your HTML page.
Follow this link to have a look at a very simple piece of code to illustrate this :
http://www.codeave.com/css/code.asp?u_log=4016
Here it the code if you don't have access to this URL :
<html>
<head>
<title>CodeAve.com/CSS - Page Break</title>
<body bgcolor="#FFFFFF">
<center>
Page 1
<br style="page-break-before:always;">
Page 2
<br style="page-break-after:always;">
Page 3
<p>
Use print preview on your browser to see how<br>
this page would print out to three pages
</center>
</body>
</html>
Hope it helps.
Don't forget to close the post if solved (so that search in the forum is easier), and reward points (so that SDN members are happy !)

Batch file to html report generator:

I want to create reports based of the batch file that I run.
I created a batch file to run a number of programs for this PC tune up service that we do at the University I work at. This is mostly a "learn for my own benefit" project, but if it works and looks nice I would like to make it availible to
my co workers.
Here is what I have so far for the batch:
@echo off
:start
echo.
echo Do you need to install
echo Microsoft Antivirus?
echo Type y / n (lowercase)
set /p antivirus=
if %antivirus%== y goto msantivirus
if %antivirus%== n goto mbam
goto start
:msantivirus
echo ProgramFiles(x86) var:
if not defined ProgramFiles(x86) (
start mseinstall32.exe
else (
start mseinstall64.exe
:mbam
echo.
echo Do you need to install
echo Malwarebytes?
echo Type y / n (lowercase)
set /p malwarebytes=
if %malwarebytes%== y start mbam-setup-2.0.2.1012.exe
if %malwarebytes%== n goto cleaner
goto mbam
:cleaner
echo.
echo Do you need to install
echo CCleaner?
echo Type y / n (lowercase)
set /p CCleaner=
if %CCleaner%== y start start ccsetup416.exe
if %CCleaner%== n goto msconfig
goto cleaner
:msconfig
echo.
echo Do you need to run
echo MSCONFIG?
echo Type y / n (lowercase)
set /p microsoftconfig=
if %microsoftconfig%== y start msconfig
if %microsoftconfig%== n goto print
goto msconfig
:print
echo.
echo Do you want to print
echo a report?
echo Type y / n (lowercase)
set /p print=
if %print%== y start (i don't know what to do here)
if %print%== n goto done
goto done
:done
echo.
echo You have finished the Zonetech scan. Press any key to exit.
pause >null
Here is what I have for the HTML (its based of another site I made so there is some leftover stuff in it):
<!DOCTYPE html>
<html>
<head>
<title> Zone Tech Computer Health Form </title>
<meta name= "viewport" content="width=device-width, initial-scale=1.0">
<link href= "css/bootstrap.min.css" rel= "stylesheet">
<link href= "css/styles.css" rel= "stylesheet">
</head>
<body>
<div class="navbar navbar-inverse navbar-static-top">
<div class= "container">
<a href= "#" class= "navbar-brand"> BOISE STATE UNIVERSITY ZONE TECH</a>
<button class = "navbar-toggle" data-toggle = "collapse" data-target = ".navHeaderCollapse">
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
<span class = "icon-bar"> </span>
</button>
<div class= "collapse navbar-collapse navHeaderCollapse">
<ul class = "nav navbar-nav navbar-right">
<li class= "active"><a href = "#">Home</a></li>
<li><a href = "#">Blog <b class= "caret"></b></a></li>
<li class = "dropdown">
<a href = "#" class = "dropdown-toggle" data-toggle = "dropdown">Social Media</a>
<ul class = "dropdown-menu">
<li> <a href = "#">Twiter</a></li>
<li> <a href = "#">Facebook</a></li>
<li> <a href = "#">Google +</a></li>
<li> <a href = "#">Instagram</a></li>
</ul>
</li>
<li><a href = "#">About</a></li>
<li><a href = "#contact" data-toggle="modal" >Contact</a></li>
</ul>
</div>
</div>
</div>
<div class = "container text-center">
<div class ="jumbotron">
<h1> Computer Health Report</h1>
<img src="img/smallerbroncologo.png" />
</div>
</div>
<div class= "container" >
<div class = "row">
<div class = "col-md-3">
<h3><a href = "#">Virus Scan </a></h3>
<p>A Virus Scan checks your computer to see if any malicious software is present.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Adware Scan </a></h3>
<p>We check your computer for programs that may present themselves as legitimate services to "repair" your computer for money or sites that redirect your internet browser.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Registry Scan </a></h3>
<p>Sometimes programs you have installed don't uninstall right or fully. Othertimes your programs may stop working because there is wrong infomration in the registry. We clean and optimize the registry
to help make your computer work better</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
<div class = "col-md-3">
<h3><a href = "#">Start Up Scan </a></h3>
<p>If your computer is booting slowly, sometimes the cause is to many programs trying to start up when windows starts up. If to many programs try to start up at once it clogs up the computers processor and makes
it run slow. We check to make sure that only the essential programs are running so your computer runs better.</p>
<a href = "#" class = "btn btn-default" > read moe </a>
</div>
</div>
</div>
<div class = "navbar navbar-inverse navbar-fixed-bottom" >
<div class = "container" >
<p class = "navbar-text pull-left"> Site by Travis </p>
</div>
</div>
<div class = "modal fade" id = "contact" role = "dialog">
<div class = class "modal-dialog">
<div class = "modal-content">
<div class = "modal-header">
<p> Contact Tech Site </p>
</div>
<div class= "modal-body" >
<p>There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable. If you are
going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text. All the Lorem Ipsum generators on the Internet tend to repeat predefined chunks as necessary, making this the first true generator on
the Internet. It uses a dictionary of over 200 Latin words, combined with a handful of model sentence structures, to generate Lorem Ipsum which looks reasonable. The generated Lorem Ipsum is therefore always free from </p>
</div>
<div class = "footer">
<a class= "btn btn-default" data-dismiss = "modal" >close</a>
<a class= "btn btn-primary" data-dismiss = "modal" >close</a>
</div>
</div>
</div>
</div>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/latest/jquery.js"> </script>
<script src="js/bootstrap.js"> </script>
</body>
</html>
Here is what I want to do:
I want to make an interactive html report based on an HTML site I made. I want to take the y (meaning yes) inputs for the strings( anitivirus, malwarebytes, ccleaner, and Microsoftconfig which are from the batch) and make them indicate something has
been done on the HTML that I created. Essentially, I see the yes inputs putting check marks (or something) in the sections of my HTML document that are related to the programs I ran in the batch. The sections in the HTML page are called Virus Scan,
Adware Scan, Registry Scan, and Start up scan and they are paired to the variables antivirus, malwarebytes, ccleaner, and microsoftconfig.
I hope this makes sense.
Thanks for any help

This is the way I was looking at it. Essentially a html file is a text file. I have already written the html file I want to have displayed. I just want the batch to make a slight change to the text in part of it. If I could
do that I would be happy. Is there any way to do that with the batch?
Editing files never has been and is still not something that batch files do easily. I ti si not the intention of batch to do this.
If you are trying to learn something, try learn-ing something that is not obsolete. Batch is not worth the time when we have PowerShell, If you ant to alter an HTML dynamically then use an HTA. It is easy and well supported.
¯\_(ツ)_/¯

How to change color in html report with MARKUP HTML ON?

While generating html reports using MARKUP HTML ON with in sqlplus, I would like to highligh the records with different colors. how can do this?

Here is an example - it produces nice output and sets the background. It displays in red if database is in NOARCHIVELOG mode. You can go further and use CASE statements for certain conditions to display different colors, font sizes.
set markup html on spool on entmap off -
     head '-
     <style type="text/css"> -
        table { background: #eee; font-size: 90%; } -
        th { background: #ccc; } -
        td { padding: 0px; } -
     </style>' -
     body 'text=black bgcolor=fffffff align=left' -
     table 'align=center width=99% border=3 bordercolor=black bgcolor=white'
spool logmode.html
select 'Archive Log Mode :'|| decode(log_mode,'NOARCHIVELOG','<font color=red>Database in '||log_mode||' mode </font>',log_mode) "Archive Log Mode"
from v$database
spool off
set markup html off

Print HTML Report.vi doesn't scale properly.

LV 8.5.1, Report Generation Toolkit, XP. Our application uses the Print HTML Report.vi to print an HTML report.
We found that on some installations the resulting page does not scale properly. Instead of being one page wide,
the printout is about 1.5 pages wide (and proportionately longer), leading to our report being truncated.
Tried different printers, different print drivers, no difference.
Finally we noticed that the affected computers all had Internet Explorer 6 installed. Updating to Internet
Explorer 7 fixed the problem. Don't know about IE8, I expect that will work as well.
Hopefully this will help someone else who runs across this problem. I couldn't find any reference to
an IE > 6 dependency in the Report Generation Toolkit readme system requirement.
Matt

Hi Charlie,
The layout option is not wired to anything in the Standard, HTML, Excel and Word Report, but it is used in the Quick Print default case. The Help document for this VI mentions that the layout option is ignored on Standard and HTML Reports but does not mention the Excel or Word Reports.
This was discovered a little while ago in this discussion forum. And a report has be filed to R&D by Ben.
Justin Parker
National Instruments
Product Support Engineer

Print HTML Report Automatically after Each UUT

Hello
I saw the document on NI site called "Print HTML Report Automatically after Each UUT". That's exactly what I want to do with XML files. So I put it in my sequence file and it works fine, but when it opens the xml file at the first step, there's a pop-up from IE who say that "Scripts are generally safe, do you want to authorise this script" (This message is also displayed when I open my file in files explorer).
So, the print is not automatically anymore as I must answer to this pop-up. does anybody has a solution to bypass this pop-up ?
I tried to use the property silent on the class IWebBrowser2. Inded, the pop-up doesn't appear anymore, but my XML file isn't correctly printed. I supposed the default response of the pop-up (which is no) is applied. So the script isn't executed.
I also tried to configure IE to not display this pop-up : No result
Regards
Laurent

Hello,
I think that you need to configure your browser, can you take a look a this article:
http://www.maxi-pedia.com/scripts+are+usually+safe+do+you+want+to+allow+scripts+to+run
Regards,
Nacer M. | Certified LabVIEW Architecte

Correct URL path for images on HTML reports

We are using Reports Server 6.0 and rwcgi60.exe to display HTML reports on the web. A number of our reports have embedded charts in them which get converted into gifs when the HTML report gets generated.
The problem is that the HTML report has a <base href="http://machinename/cache/xyz.html"> at the top of the report. In our case, the machinename is the name of the web-server. However, when folks go to our website, they actually see our domain name rather than the internal machine name of the web-server. Hence, the images do not show up as the URL associated with the image is not accessible by folks coming from outside the web-server.
Is there some setting that will help us set the base href associated with generated reports? Or is there some other way to get the reports to show up with images on the web?
Thanks

You can't change the base tag - but I'm not sure I understand the problem. If machinename.domain is the full name of the machine running the webserver, and this is what was used when calling the CGI, then this is what the base tag will have. Does your machine have 2 names or something - and only 1 gets resolved to some folks?
Regards
The Oracle Reports Team http://technet.oracle.com

Difference in Profit Center Payables report and Vendor Balance report

Hi Gurus,
After posting an invoice, i can see that invoice posted if i execute FBL1N or FBL3N but if i execute Profit Center Payables report, balances are not updated.
Is there any PC Push facility in SAP, which updates the balance of PC Payable report after executing this PC Push? Please let me know.
Thank You
Regards,

Dear,
Are you able to see the General Ledger View of that entry?
mukesh

Difference between pdf and html report format

Why HTML report printouts truncate from the right-end side, compare to the pdf report format ?, do i need to change anything
while running report through HTML format

The printing from html output is majorly affected by browser settings. Once you try to change the left and right margins in page setup before printing, I solved this problem in this way , it may work for you. Let me know if it works or if you overcome it by other ways.
with regards
wara

Animated gif to html report

Hello All
Is it possible to save an animated GIF to a html report (for publishing to web and still maintain animation)
Regards
Ray

Mike
Firstly, thanks for showing an interest in my problem.
I've done some searching here on the forum using keywords like html, animated gif, report etc, but haven't seen anything close to what I want to do.
I csn save FPs as a whole into a html report, but am unsure where to even begin for an embedded item such as the gif.
The animated gif was placed on the FP by simply cut and paste and I'm not sure how to go about saving just the gif (sans rest of the FP) to a html report and still maintain the animation properties.
Regards
Ray

Problem with NIReport.llb\Print HTML Report using IE.vi on different machines

We have 5 machines here in our workgroup which have the same state regarding security patches and other system updates. We recently found out that there is a problem with the NIReport.llb\Print HTML Report using IE.vi on the different machines.
If I would open the VI on MachineA the control could be loaded. If I would open the VI on MachineB the control could be loaded. If I would copy the VI from MachineB to MachineA and open the VI the control could not be loaded. If I would copy the VI from MachineA to MachineB and open the VI on MachineB the control could be loaded. MachineB could load the version from MachineA and MachineB but on MachineA only the own version will load. I have seen that both versions have the same GUID for the Microsoft Webbrowser but are different in some other aereas.
Since printing HTML Reports is part of the application which will be distributed as application I want to know if someone else have seen such a behaviour or has got problems distributing an application.
Also I want to know which additional information is stored in an Active-X container about the control beside the GUID.
We have Win XP Prof SP2 with MS IE 6.0.2900.2180 on all machines in the workgroup.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi Tom,
this is the VI <vi.lib>\Utillitiy\NIReport.llb\Print HTML Report using IE.vi copied from a machine that can load and run the VI and it will print. On this machine the control in the VI is white.
This VI will give the "Control could not be loaded" message on my machine.
The file shdocvw.dll is 2006-10-23 16:18 size 1.460 KB and I verifyed that both machines have the same version of this file.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions
Attachments:
Print HTML Report using IE.png ‏11 KB

Need a help on HTML report

Hi,
am going to generate an HTML report for a table by using below code
SET heading off
SET pagesize 80
SET MARKUP HTML ON SPOOL ON HEAD "<TITLE>Job Comparison Report</title> -
STYLE TYPE=’TEXT/CSS’></STYLE>"
SET ECHO OFF
SPOOL "C:\Jc\Reports\LoadUnmatchedCustomerHistory.htm"
select * from TB_JOB_REPORT;
SPOOL OFF
SET MARKUP HTML OFF
SET ECHO ON
its working fine.
but in my TB_JOB_REPORT table contains more than hundred accounts information also which is having only two fileds one is ACCT_NUM another one is TEXT_REPORT. i just want to geenrate individual report for each account as of now am getting all accounts information in a single report.
is there any possibility to generate a report for individual accounts.
like select * from TB_JOB_REPORT where ACCT_NUM=???, i just want to pass a loop to get corresponding account information but not sure how to implement this logic in for loop.
any ideas to do this please share me...
Thanks in advance

Last week I have played with something like below (not tested!!! not very sure I remember all :( - just to get an idea ;)
html attributes (fonts, colors, borders, ... you name it - I'm not even aware of) were filled in by others
with
the_data as
(select 1 a_number,'abc' a_string,sysdate a_date from dual union all
select 2,'qwertzuiop',trunc(sysdate) - 2 from dual union all
select 3,'qwxy',to_date(null) from dual union all
select 4,null,to_date('1.5.2000','dd.mm.yyyy') from dual union all
select null,'?',trunc(sysdate) from dual
select xmlelement("table",
         xmlagg(
           xmlelement("tr",
             xmlelement("td",xmlattributes('right' as align), 2 * a_number),
             xmlelement("td", initcap(a_string)),
             xmlelement("td", to_char(a_date,'yyyy-mm-dd hh24:mi:ss'))
         order by a_number desc nulls first
                 ).getclobval()
from the_dataRegards
Etbin

Specifically controlling the width of a table in an HTML report

I am generating an HTML report that consists of several detail tables
followed by a summary table at the end. Each detail table is
generated within a for loop. The summary table is generated
separately at the end. The detail tables all have the same column
width and same number of columns. However, I cannot get the summary
table to have the same column width even though it has the same number
of columns and the same column width setting.
Does anyone have any suggestions?
Thanks!

Hi,
What VI are you using to create the tables using the for loop? What VI (Append Table to Report.vi?) are you using to create the table at the end?
If you are using the Append Table to Report.vi to create the tables in the for loop, can you change the width of the columns and see expected behavior?
Let me know, and I should be able to help you out further.
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

Open & print an existing HTML report

I want to open a previously created, saved & closed HTML report for printing. I don't see any thing in the Report Generation vi group for opening existing reports and wasn't sure how to go about it (if at all possible) using the standard file open options to get to a report. Any ideas? Thanks.

Hello,
To print and view an HTML report you have already saved to disk, just create a new report, and use the "Append User Formatted HTML to Report.vi" to append the entire HTML content of the report to a new report. Then use the "Print Report.vi" and "Open HTML Report in Browser.vi" to print and view it. This is the easiest way I can think of...here is a screenshot showing what I mean:
Hope this helps,
-D
Message Edited by Darren on 04-18-2006 01:31 PM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
print_and_save_report.jpg ‏84 KB

Generate HTML report with ANT

Hello,
I'm new to FlexPMD. I have just generated my firsts reports. I try to generate HTML reports.
I browse the documentation, this forum and the web and I find informations to :
- generate documentation with Hudson
- generate documentation with Maven
- generate documentation with XSLT pmd.xml -> html
Ok, I try to keep it simple. So I don't want to use Hudson.
I'm using ANT, and I currently don't want to install/learn Maven.
I'm using FlexUnit with ANT. And It's really simple to generate reports :
<junitreport todir="${report.flexunit.loc}">
            <fileset dir="${report.flexunit.loc}">
                <include name="TEST-*.xml" />
            </fileset>
            <report format="frames" todir="${report.flexunit.loc}/html" />
</junitreport>
I'm really new to FlexPMD, so I don't have currently a big knowledge, but it seems impossible to generate a HTML report just like junitreport. (1 line in an ANT task)
I test the XSLT transformation found on this forum (thread "XSLT pmd.xml -> html"). It's really cool. But it's seems difficult, for example, to extract the wrong code part and add it to the HTML page.
So, what is the simpler solution to generate HTML report just with FlexPMD/ANT ?
Thanks !

Hello,
Currently you generate a PMD report with ANT like this :
<! -- define taskdef -->
< taskdef name="pmd" classname="com.adobe.ac.pmd.ant.FlexPmdAntTask" classpath="${build.pmd.loc}/flex-pmd-ant-task-${flexpmd.version}.jar">
         < classpath>
             < path refid="flexpmd.base" />
             < pathelement location="${build.pmd.loc}/commons-lang-2.4.jar" />
             < pathelement location="${build.pmd.loc}/flex-pmd-core-${flexpmd.version}.jar" />
             < pathelement location="${build.pmd.loc}/flex-pmd-ruleset-api-${flexpmd.version}.jar" />
             < pathelement location="${build.pmd.loc}/flex-pmd-ruleset-${flexpmd.version}.jar" />
             < pathelement location="${build.pmd.loc}/plexus-utils-1.0.2.jar" />
         < /classpath>
< /taskdef>
then generate XML report like this :
< pmd sourceDirectory="${src.loc}" outputDirectory="${report.loc}" ruleSet="${build.pmd.loc}/rules.xml"/>
The XML contains some file nodes :
< file name="/Users/user/workspace/AS3_UTILS/src/utils/align/gridAlignSpaceNumber.as">
       < violation beginline="22" endline="22" begincolumn="0" endcolumn="27" rule="adobe.ac.pmd.rules.naming.TooShortVariable" ruleset="All Flex Rules" package="utils.align" class="gridAlignSpaceNumber.as" externalInfoUrl="" priority="5">This variable name is too short (3 characters minimum, but 1 actually). Detects when a field, local, or parameter has a very short name< /violation>
< /file>
The message is in the text node < violation>TEXT< /violation>
For me, we miss an important part of the message : the portion of the "bad" code.
It could be very usefull if PMD can generate something like this :
< file name="">
       < violation beginline="" endline="" begincolumn="" endcolumn="" rule="" ruleset="" package="" class="gridAlignSpaceNumber.as" externalInfoUrl="" priority="">
        < description>TEXT< /description>
        < code><CDATA[MY CODE
MY CODE
MY CODE]>< /code>
    < /violation>
< /file>
With this, we can generate "full" HTML report with XSLT transform easily.
I understand that it modify the standard XML schema of the output.
So, perharps it could be an option like this :
< pmd fullDescription="true" sourceDirectory="${src.loc}" outputDirectory="${report.loc}" ruleSet="${build.pmd.loc}/rules.xml"/>
What do you think ?
Thanks !

Center HTML Report

Similar Messages

Maybe you are looking for