Certificates Time Validity

Hello:
I am facing an issue with my certificates once I generate them using Apple Developer or Android Keytool. I have to wait 5 hours at least to compile my app (look at the screenshot). It happens with the developer certificate, the keystore or the push notifications certificates.
Any further ideas why this is going on?
Saludos,

Yes, this is a known bug with DPS App Builder. You can either wait a few hours before App Builder finally understands that your new certs are valid, or you have change the date/time settings on your computer if you're really in a hurry. Unfortunately, this bug isn't scheduled to be fixed until v27.

Similar Messages

Timestamped document with expired certificate - not validating

Hi,
I have a document that was timestamped and certified on 2010/11/23 15:32:16 -03'00'. The timestamp certificate is still valid, but the certifier's certificate expired on 2010/12/11 07:00:00 -03'00'.
The Reader can't validate this certificate, eventhough the Security configuration says that it should use the "secure time" and accept expired timestamps.
In "Signature Properties" it says:
The signer's identity is unknown because it has expired or is not yet valid.
In "Certificate Viewer" it says:
The selected certificate has errors: Not time valid
Shouldn't the validation use the timestamp as a source for time validation?
Thanks!!
-RCT.

Hi Melvin,
First check to see if the certificate is in the store
PowerShell: Get-ChildItem cert:\LocalMachine\My\ to list the certs in the store
Screenshot from my desktop
Cheers,
-Ivan
-Ivan

Anywhere Access - CERTIFICATE NOT VALID OR PASSWORD INCORRECT

Setting up Server Essentials 2012. During the "Anywhere Access" wizard I followed a link to get an SSL for the company's URL that is directed at the server. I chose one of the two options that was presented during setup and purchased a "SSL
Cert for SSL Certificate - Comodo Essential" from Enom Inc.
Once I got the certificate in email, and continued the wizard I get the following error:
CERTIFICATE NOT VALID OR PASSWORD INCORRECT
Either the certificate is not supported or the password is incorrect. Please try again.
I've tried everything I can to get it in the wizard to no avail. If I manually push it into the certificate manager it accepts it there properly but the Essentials Dashboard still thinks it's no installed so I believe I have to complete this wizard. I
cannot find ANY support on this currently on the internet on searching. Anyone able to help?
(By chance the server is also unable to install two critical updates. I am taking things one at a time in the order they come right now though.)
KevenD.

The PFX file is only allowed in the wizard if you are importing a previously created SSL. Here's the steps that got me to the dead end I'm in:
Step 1 - Setup process - Set up Anywhere Access
Step 2 – It asks what domain name we have pointing to the server, configures the firewall routing services etc and then gets to the SSL portion which I will depict below.
Step 3 – Domain Set up in the Anywhere Access wizard: Entering name of our domain to use.
Step 4 – SSL Certificate set up. I select “I want to purchase..”, clicked on the two links provided, decided on one from eNomCentral and made the purchase.
Step 5 – Cert request is issued and a link to GoDaddy and eNomCentral are given. It was eNomCentral which sold me on the Comodo SSL.
Step 6 – Park and wait.
The next time I go into the wizard to continue (once the certificate was issued) I get the errors I earlier depicted from the wizard stating:
CERTIFICATE NOT VALID OR PASSWORD INCORRECT
Either the certificate is not supported or the password is incorrect. Please try again.
I get two methods of importing it, copy/paste or upload. I've tried both methods and each generates a different error.
KevenD.

Firefox is asking me to add an exception for security for a website that has told me its certificate is valid.

I am running Firefox 31.0 on a Windows 8.1 o/s. When I attempt to access my email provider in its' "secure" mode, I am advised that the connection is untrustworthy. (Parenthetically, this does not occur on my other two systems running respectively, Windows 7 and Windows XP.) I am asked to provide an authorization for an 'exception' prior to completing the connection. The option of making the exception permanent is NOT available, so I go through this every time I begin a new internet session. I have contacted the email provider and been advised that their digital certificate is valid. So, as I see it there are three problems: (1) if the certificate is valid, as is suggested by the provider, why does Firefox not recognize this, (2) why does the exception window not allow me the option to make the exception status enduring, and (3) why is this problem present only on my Windows 8.1 system?

Try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
If that didn't help then remove or rename secmod.db (secmod.db.old) as well.

ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.

Im trying to connect to my azure subscription via powershell on my machine but keep getting the following error when i run a command:
ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated with this subscription.
The steps i have taken so far are:
1. get settings file
Get-AzurePublishSettingsFile
2. Import settings file
Import-AzurePublishSettingsFile -PublishSettingsFile "C:\Users\me\Downloads\credentials.publishsettings"
3. I then run Get-Azuresubscription with the following output:
SubscriptionId : 699385c3-b83a-44af-a651-bxxxxxxxxx
SubscriptionName : Windows Azure MSDN - Visual Studio Premium
Environment : AzureCloud
SupportedModes : AzureServiceManagement
DefaultAccount : 3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4
Accounts : {3B68902B5170D5EC91BFCBE4CC27E2A8838F61C4, 26B118D7F3C598FB8FE9CDC49AB5DE5E450C967C,
03E1E1F0B8C7717F11FB58A14138C35524AB3F8D, 9A2E1FD267ECCC0E9B8C151BD931FC4824E89184...}
IsDefault : True
IsCurrent : True
CurrentStorageAccountName :
TenantId :
I run Get-AzureAccount and get the following:
Id Type Subscriptions Tenants
3B68902B5170D5EC91BFCBE4CC27E2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
A8838F61C4
26B118D7F3C598FB8FE9CDC49AB5DE Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5E450C967C
03E1E1F0B8C7717F11FB58A14138C3 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
5524AB3F8D
9A2E1FD267ECCC0E9B8C151BD931FC Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
4824E89184
85AD02CB8EB8AB20CF2C44FD9D19F2 Certificate 699385c3-b83a-44af-a651-xxxxxxxxx
9B6BB2FCD2
Finally, when i try to run Get-AzureSQLDatabaseServer, to list my databases, i get this error:
WARNING: Client Session Id: '5911f288-7b02-4c94-bb9d-37b9ea5fc187-2015-01-13 11:47:54Z'
WARNING: Client Request Id: '3e5f7ea9-092a-46fd-a6a6-6916b9161b77-2015-01-13 15:25:41Z'
Get-AzureSqlDatabaseServer : ForbiddenError: The server failed to authenticate the request. Verify that the certificate is valid and is associated
with this subscription.
At line:2 char:1
+ Get-AzureSqlDatabaseServer
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-AzureSqlDatabaseServer], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Server.Cmdlet.GetAzureSqlDatabaseServer
I would appreciate any help in figuring out what i am doing wrong here.
Thanks,

OK. That won't work in Azure Automation though, as mentioned above. OrgID (recommended) or cert-based auth will need to be used. PublishSettings file won't work.
Correct, but the original question was:
<Quote>
Im trying to connect to my azure subscription
via powershell on my machine
</Quote>
I wanted to test automation script's core functionality without having to wait for the very very long time taken for an automation runbook
to spin up, actually run and provide output (can often take 2+ minutes for a trivial script). Although i cant run Workbooks on my pc, i can run the core modules (view virtual machines, databases etc) to ensure my logic is sound.

SSL Certificate appears valid in Server Admin, but as expired in browsers

I've imported a certificate from Thawte that expires June 29 2008. It shows the correct dates within the Certificates tab of Server Admin, and everthing looks fine, but when I load an https: page on my server, the browser tells me that the certificate expired June 30 2007.
This is a fairly new Mac Pro running OSX 10.5.2 Leopard Server, and Apache 2.2.
If you click on the embedded icon from Thawte that links to their site for verification, it also shows that the certificate is valid.
I've deleted and re-imported it a few times, and rebooted the server, but it always shows as expired in browsers.
Sample page with link to Thawte;
https://cstore.uvic.ca/index-ssl.lasso
Thanks in advance to anyone who can help me get this fixed.
Brad.
Message was edited by: FastCompany

Camelot,
Thanks for the reply. I'm not offended by your suggestion that it's something simple that I've overlooked, rather I'm hoping that it is.
I have selected the certificate on the appropriate site on the web panel. When you visit the site link In my original message, you'll see that the correct certificate is being served, but it appears as expired to the browser, even though it shows as valid in Server Admin.
I also found it in the Keychain utility, and it also shows as a valid certifcate there. I did find an entry in the Keychain utility for an earlier attempt at installing an expired certificate, so I deleted that entry.

Certificate signature validation failed

Hi!
I'm getting nuts over how to get Acitve Directory to work with java.
I have a root-certificate for the domain (supposed to work for everything according to our networking expert) but when using it I get: "Certificate signature validation failed".
When looking in C:\ on the ADS I find another certificate but then my javaprogram says: "No trusted certificate found".
So, now after much searching where I seems to find everything but what I'm looking for I have to ask: What should I be looking for? Hopefully when looking for the right thing I will find the answers. :-)
Thanks you very much in advance
Roland Carlsson

Please! Anyone? How can I get a correct certificate from our ADS? The certificate-server on is on our Exchange-server. I have a certificate that is supposed to work all over the domain and I have check several other certificate that I found on our servers but I still havn't found anything that works.
I'd would really like to get some ideas about where how to find the working one.
Thanks in advance
Roland

Time Validation question

I am using the time validation and it works well, however my
case (which I think would be common) doesn't seem to be supported,
or I am just not sure how to configure. I want someone to enter in
a time such as '8:45 AM' or '11:30 PM'. It seems as though it
requires either a leading zero, or a single diget, but not a way to
do both. The code below allows for the '8:45 PM' option. But not
11:45 PM.
<script type="text/javascript">
var eventtime = new
Spry.Widget.ValidationTextField("eventtime", "time", {format:"h:mm
tt", hint:"8:00 AM", validateOn:["blur", "change"],
useCharacterMasking:true});
</script>
The example on this page is forces the leading zero.
http://labs.adobe.com/technologies/spry/samples/validationwidgets/TextfieldValidationSampl e.html
Am I missing something or does that pretty much require users
to always do leading zero in order to enter the full range of
time?

The textfield validation widget implementation doesn't
support variable length for time format. To cover your use-case you
might use the "hh:mm:tt" format and add the leading zero for single
digit case.
The time formats that are accepted are: "HH:mm" (default),
"HH:mm:ss", "hh:mm tt", "hh:mm:ss tt", "hh:mm t", "hh:mm:ss t".

N79 NAM RM350 server certificate not valid "firmwa...

i have updated my phone frm v11 to v20 but nw wen i go to devices update to update to latest firmware
it says " SERVER CERTIFICATE NOT VALID"
i want to update to v30 plzz help anyone
reguards
zain
Message Edited by kaskay on 21-Aug-2009 10:42 AM

i am not sure that v30 had been released for nam devices, if it has have you tried NSU ?
http://europe.nokia.com/get-support-and-software/download-software/device-software-update
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Time validator

I am trying to come up with some way of producing an applet that will deal with the following:
In this task you are required to design, create and test a new class called newTime.
1. Design a solution for a new class called newTime.
a. public boolean valid24Time (int hh, int mm)
     The hours (hh) can only be in the range 0-23 and the
minutes (mm) can only be in the range 0-59.
     This method must return true if the time is valid and false
if the time is invalid.
     b. public String convert24ToStd (int hh, int mm)
     The time is passed to the method as hours (hh) and minutes
(mm)with the time in 24
     hour format. The 24 hour format must be changed into standard
format in the form
     hh:mm AM for a morning time and hh:mm PM for an afternoon time.
     This method must return a string containing the time in
standard format.
     c. public int convertStdTo24 (String hhmm)
     The time is passed to the method as a string in standard format
in the form hh:mm
     AM for a morning time and hh:mm PM for an afternoon time. The
standard format     must be changed into 24 hour format.
     This method must return an integer containing the time in 24
hour format.
     d. public int addTime (int hh1, int mm1, int hh2, int mm2)
     Two times are passed to the method in 24 hour format as hours
and minutes (hh1 and mm1, hh2 and mm2). The two times must be
added together.
     This method returns the calculated time as an integer in 24
hour format.
     e. public int subtractTime (int hh1, int mm1, int hh2, int mm2)
     Two times are passed to the method in 24 hour format as hours
and minutes (hh1 and mm1, hh2 and mm2). The second time must be
subtracted from the first.
     This method must return the calculated time as an integer in 24
hour format.
2. Error handling routines must be included to deal with exceptions.
3. Write the code for the newTime class.
4. Design and create a testnewTime class which tests the methods in the newTime class.
Document the layout of any input and output screens used.
5. Create test data to test the newTime class and determine the expected results.
6. Prepare a test plan.
7. Test the software, compare the actual results to the expected results keeping a log for
each test which identifies any discrepancies between actual and expected results and
records any amendments made to correct errors.
8. Produce technical documentation to describe the class interface and purpose and
operation of the newTime class.
9. Produce a printed program listing.
Any help would be grateful
Regards
Rary Geddi

I've have tried all ways to get this to work but with out any luck.
What am I doing wrong?
public class Frame1 extends JFrame {
String inputHour;
String inputMin;
int hh = 0;
int mm = 0;
boolean isHourValid;
boolean isMinValid;
public boolean valid24Time ( int hh, int mm)
{ boolean isHourValid = ( hh>= 0 && hh<24);
boolean isMinValid = ( mm>= 0 && mm <60);
return (isHourValid & isMinValid);
private JPanel contentPane;
private JPanel jPanel1 = new JPanel();
private JButton jButton1 = new JButton();
private JButton jButton2 = new JButton();
private JButton jButton3 = new JButton();
private JButton jButton4 = new JButton();
private JButton jButton5 = new JButton();
private GridBagLayout gridBagLayout1 = new GridBagLayout();
private GridBagLayout gridBagLayout2 = new GridBagLayout();
void jButton1_actionPerformed(ActionEvent e) {
inputHour = JOptionPane.showInputDialog("Enter Hour");
hh = Integer.parseInt(inputHour);
inputMin = JOptionPane.showInputDialog("Enter minute");
mm = Integer.parseInt(inputMin);
if ( isHourValid & isMinValid )
JOptionPane.showMessageDialog
(null,"Time invalid" hh mm,"Invalid time", JOptionPane.PLAIN_MESSAGE);
else
JOptionPane.showMessageDialog
(null, "Time valid" hh mm, "Valid time", JOptionPane.PLAIN_MESSAGE);
}

How to monitor a certificate period validity installed on the ACS ?

Hello,
I have to monitor a certificate period validity installed on the ACS with Centreon.
Someone can help me ?
Thanks,
Regards,
Oliver.

Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Certificate Setup.
Cisco Secure ACS displays the Installed Certificate Information table on the ACS Certificate Setup page.
Note If your Cisco Secure ACS has not already been enrolled with a certificate, you do not see the Installed Certificate Information table. Rather, you see the Install new certificate table. If this is the case, you can proceed to Step 5.
Step 3 Click Enroll New Certificate.
A confirmation dialog box appears.
Step 4 To confirm that you intend to enroll a new certificate, click OK.
The existing Cisco Secure ACS certificate is removed and your CTL configuration is erased.
Step 5 You can now install the replacement certificate in the same manner as an original certificate. For detailed steps, see Installing a Cisco Secure ACS Server Certificate.

Date and Time validation together...

Hi,
I want to have the date and time validation together. Is it posible?
I am not able to do it using "AT SELECTION-SCREEN".
e.g.
DATE1 - DATE2 is 12/22/2009 - 05/27/2010
TIME1 - TIME2 is 15:00:00 - 01:00:00
This will result in error because the time1 is more than time2 but it is correct when it is tied to date1.
I tries to validate them together but it gives the standard error all the time.
Please help me.
Thank you.

Hi,
You could have a normal range for your date field and two parameters for the times...no?
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) ttime FOR FIELD p_time1.
PARAMETERS: p_time1 type t.
SELECTION-SCREEN COMMENT 54(2) tto FOR FIELD p_time2.
SELECTION-SCREEN POSITION 60.
PARAMETERS: p_time2 TYPE t.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
ttime = 'Time'.
tto = 'to'.
Kr,
Manu.

SAProuter Certificate's validity.

Dear All,
Our SAP Certificate's validity going to end tomorrow.What is the steps needs to be taken to renew?
PLEASE EXPLIAN THE PROCEDURE....
Regards,
SACHIN

Do not create multiple users...
Juan

Help! Certificate name validation failed.

Hi. Im new to Windows Server 2008 and Active Sync.
I recently installed Windows Small Business Server 2008 which installed the Exchange Server Role Automatically.
I have sucessfully created some mailboxes/users and now I need to access them from outlook and mobile devices
My Company website is in the format www.mydomain.com. The MX records have not yet been directed to the server from the domain host.
When i tried Microsoft Connectivity Analyzer to check connections with Active Sync, it passes all tests except where it says "Certificate name validation failed".
It also states that "Host name www.domain.com doesn't match any name found on the server certificate CN=Sites."
I do not know why this occurs. my internal domain name is in the format "domain.local". I wondered if i was supposed to make it the same as the public www.domain.com format.
Please assist in any way you can.

You need a certificate that is trusted by your mobile devices. Unless you can put your root certificate or self-signed certificate in the trusted certificates store on every mobile device, which is really hard to do, you should buy a UCC SSL certificate
with the Common Name (CN) of your Exchange server URL public hostname, e.g., mail.domain.com, not mail.domain.local, and a Subject Alternative Name (SAN) with Autodiscover.domain.com where domain.com is your e-mail domain. Those are the
minimum names that you need in your certificate and for most smaller customers they're all you need.
Consider deploying split-brain DNS so that you can use the same names, e.g., mail.domain.com, and quit using the AD domain name domain.local for Exchange URLs. It will make your whole certificate experience much easier and probably make things easier
for your users as well.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

SSL certificate not valid

Just started receiving 'server's security certificate not valid for palm.imap.mail.yahoo.com' error early this morning. I have a (Sprint) Palm Pre (P100EWW) on version 1.4.1.1. How do I correct?

I have tried removing palm and still cannot get it to work! any other ideas? I did notice it changed the port to 995 when I first was entering my email info. It used to be set to 993?
Also, what do you put in the username.... is that the beginning part of the yahoo id prior to @yahoo.com?

Certificates Time Validity

Similar Messages

Maybe you are looking for