CF10 CFML tag, functions and attributes autofill in Dreamweaver CS5.5

We have Coldfusion 10 and Dreamweaver CS5.5 in my company. We want to be able to see all the CF10 CFML functions, tags and attributes in the autofill when writing code. I have found an Adobe link to a download for them but it doesn't say what version of Dreamweaver is required for it to work. Can someone please tell me? Will it work with CS5.5?
(This window won't let me paste in the link I have but it's in the Coldfusion Support Center Downloads | Coldfusion 10 Devleoper Tools | Adobe Coldfusion 10 Extensions for Dreamweaver. Also note that we do have CS5.5 in my company but I don't have an install available for me to test so I'm hoping it will be easier to get an answer to this question here rather than obtain one....thanks)

This is what you are looking for : http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec1896 9-7fff.html
Download MXP from here : http://www.adobe.com/support/coldfusion/downloads.html#cf10devtools
Insatll and then launch Dreamweaver CS 5.5

Similar Messages

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

Copy and Paste Problem in Dreamweaver CS5.5

Hi All,
I saw the posts for Dreamweaver CS4 for copy and paste problems. I tried all the suggestions but to no avail. My copy and paste would not work. Then I found what worked for me...
I went to Edit --> Keyboard Shortcuts --> and I changed from "Dreamweaver Standard" to "Dreamweaver Mx2004". For the moment, it is working. I am on XP Professional.
From the other posts the suggestions were...
Switch to Classic Mode
Delete the Configuration file
Uncheck "Enable related files"
It was a problem for sure, and hopefully I won't be back for this one :-) Good luck

Hello,
The problem has been solved by over writing the � font.properties � file in jre/lib/� .
The changes given as follows:
# Exclusion Range info.
# exclusion.dialog.0=0500-20ab,20ad-ffff
# exclusion.dialoginput.0=0500-20ab,20ad-ffff
# exclusion.serif.0=0500-20ab,20ad-ffff
# exclusion.sansserif.0=0500-20ab,20ad-ffff
# exclusion.monospaced.0=0500-20ab,20ad-ffff
That is, we comment the lines having Red foreground color.

Help! Split and Design modes in Dreamweaver CS5 is disabled.

The first time I launched Dreamweaver CS5 I didn't like the default code / design view my files appeared in. So I choose a preference setting where files appear in a single pane in code view. Unfortunately I don't remember where this setting is located. I'm not sure if this is the culprit but I somehow lost the ability to toggle Split, Design, Live Code, Live View, and Inspect on any web file (.html, .htm, .asp, etc.). Could someone help me figure out how to enable these modes?

I am having the same problem, except the solution suggested by John Waller isn't working for me.
I opened a .css file and was prompted by a suggestion above the code/design windows stating "Inspect mode is most useful with certain workspace settings." and I clicked the "Switch now" option to which I was trapped in a code only mode without the option to edit anything other than css!
Please help.
Best,
Nela

Remove white space and indent code in Dreamweaver CS5

Ive inherited some code which has loads of randomly placed spaces and line breaks. With Dreamweaver CS5 is it possible to clean up the code so its nicely indent like this?:
<div>
     <div>
          <div>
          </div>
     </div>
</div>

Yes, you can have Dreamweaver indent your code by going to the "Format Source Code" button on the toolbar and selecting "Apply Source Formatting".
You can edit the way that your text is formatted in Preferences > Code Format

How do i download my PHP site and edit it with Dreamweaver CS5?

I have followed the instructions and installed MAMP for mac. Connected and downloaded the entire site.
When i open the index.htm file it appears with a URL for the main website.
When i place it in live view the website code and design appear, but i cant edit it.
When i copy the code and save it then open the index.htm file the design appears without the links to the flash, gifs, etc and looks pretty basic.
the page appears with the following meta tag
<meta http-equiv="refresh" content="0;url=http://playconcert.com">
Can anyone help!
Thanks in advance.

I have followed the instructions and installed MAMP for mac. Connected and downloaded the entire site.
When i open the index.htm file it appears with a URL for the main website.
When i place it in live view the website code and design appear, but i cant edit it.
Have you tried Inspect mode? If not try this:
Open your page in Split Design/Code view. Start Live View. Start Inspect mode.
Move the mouse around in Live View. Notice that the element under the mouse is automatically selected in Code View. Click on the element that you'd like to edit. Make your edit in Code View. Press F5 to refresh Live View.
Repeat, if necessary
HTH,
Randy

BSP Applications functions and working

Step by step procedure based on the functions and attributes of each and every technical terms
Modertaor message : Wrong forum. Read rules of engagement before posting. Thread locked.
Edited by: Vinod Kumar on Jul 15, 2011 5:25 PM

Hi Yann,
Code will be generated as class. IF you want the class name of current webdynpro component that is generated, right click on the webdynpro component -> select check -> extended syntax check. New window will be opened in which program name will be specified. Remove the "" ==CP" suffix and remaining part is the class name of the current webdynpro component.
Thanks,
Prashanth

Downloading and editing an existing WordPress site in Dreamweaver CS5.

Hello! New to the forums, here.
I'll try to be brief. I've got a WordPress site in-place at metalmeter.com that is hosted through HostGator. Basically, what I'm looking to do is get the site from the remote server and edit it in Dreamweaver CS5, previewing all changes on a local testing server before putting the updated contents back on the remote server.
Now, let me be clear: I've tried plenty of the tutorials. I've watched hours of videos. I still can't get it configured properly. I've got the FTP connection to the remote server running smoothly. I've got XAMPP installed. I'm having difficulties (and I apologize for being vague), and I just don't know where the problem is located. In my htdocs folder for XAMPP, I've got two subfolders 'metalmeter' for the remote server's downloaded contents, and 'wordpress' for the wordpress installation that every page seems to be pointing me toward. What confuses me is that when I try and open the uppermost index.php file on the remote server, the dynamically discovered content is not being displayed in the live view with my local testing server. I want to be viewing my existing WordPress site in its entirety exactly as I see it online while I'm editing it, and then pushing back updated files to the /public_html/ root directory of the remote server so that I can edit the site from my local client. I'm extremely new to Dreamweaver, so any help you could offer would be greatly appreciated.
If you know how to do exactly what I'm trying to do and have been successfully viewing and editing your existing WordPress site in Dreamweaver for upload, please take some time to explain the set-up. I'd be forever in your debt!

Nancy O. wrote:
I've been following this discussion for a while now and I don't understand why you hope to edit articles from DW. That's what the WP Admin panel is specifically designed for. Besides, you won't find your articles in any of the site files because they don't exist there.
I agree I don't see any reason to want to edit a Wordpress site in Dreamweaver. If you are using Wordpress then you may as well put Dreamweaver in the bin. Although people do actually want to edit and manipulate the design in Dreamweaver (including myself) and from what I've read its possible but I've never found a source which explains fully how to achieve this and those that I have it seems too much effort to even bother about.
I guess the Dreamweaver environment feels more like home and is more user friendly.
To put it another way, a typical WordPress installation contains around 800 files in some 80 folders. Those files don't contain any content, just a whole lot of PHP code. In fact, the only page most people ever see on your site is the index.php page which is dynamically created over & over by the server with content from the MySql and various include files.
For sure and that's why people who use Dreamweaver and feel the need to manipulate a Wordpress site in Dreamweaver because Wordpress is 'in vogue' get lost. Wordpress just containes a lot of pages with nothing to see apart from some php, many of who will not understand one jot.
Unless you're a coding guru, you should definitely NOT touch any of the core WP files as this could cripple your site. If you want to customize your Theme, look at the CSS and include files in your Themes folder. See Anatomy of a WordPress Theme:http://yoast.com/wordpress-theme-anatomy/
lol your not wrong there!
For a quick tip on Theming, open your remote site in Firefox equipped with the 'Web Developer Toolbar'. Edit CSS on screen. Save changes to your local site and upload it to the remote server. No testing server required.
Wordpress is Wordpress and Dreamweaver is Dreameaver. As far as I can make out the two don't mix.
Ideally you would just choose a Wordpress theme which most relates to the nice site you have designed in Fireworks of which you won't find any however goodthe themes are. Then manipulate the themes css that's if you can understand it. Even for a seasoned css expert its heavy going because everyone produces css differently to achieve the same results.
Leave Wordpress well anlone unles you're going to use it out of the box so to speak or as a web-developer don't mind a bit of reverse engineering.

CF 10 CFML function, tag definitions and help files in DW cs6

I'm unable to view the new CF 10 CFML function, tag definitions and help files in DW CS6 after using the ColdFusion10_Tags_for_DW.mxp update file. I see that the 'CF10 Extensions' are enabled in Adobe Extension Manager CS6.
When I pull up the Reference tab Book: 'Adobe CF Function Reference', I don't see canonicalize in the drop down of 'CFFunctions'.
Is there an issue with updating the extensions within DW CS6?
Any help would be great.
Garth

I am afraid http://forums.adobe.com/community/coldfusion is more suitable for this question.

Get all tags and attributes from schema

Mapping question
I have a mapping requirement where the customer needs all the tags and attributes from the schema whether it has a value or not. The schema has almost 1500 tags and each of them has a attribute. We are mapping only about 50 of them, so the rest of them has to be blank. Actually about 700 of the attributes has fixed values like CHAR. Normally I would create a second mapping and use exists otherwise map a empty tag, but in this case the number of tags is high. Is there a easy way to create all the blank tags during runtime similar to using generate instance in test mode or generate sample file in xmlspy.
The scenario is IDOC to SOAP with BPM customer is using a custom schema
Thanks in advance
Asif

Any hint or suggestion with the use of java/xslt/abap mapping or any other way to avoid mapping each of these tags manually will be appreciated.
thanks
Asif

Open hub destination of text and attribute for Functional Area

Hi Expert
I have a requirement to accommodate both attribute ( 0FUNCT_LOC_ATTR) and text ( 0FUNCT_LOC_TEXT ) for functional area in open hub destination .For this a DSO has been created from both 0FUNCT_LOC_ATTR, 0FUNCT_LOC_TEXT data sources .Problem is that DSO has 0FUNCT_AREA ( Functional Area ) as only key fields . So text for both english ( EN ) and Dutch ( NL) for particular 0FUNCT_AREA not getting loaded .If we assign both 0LANGU and 0FUNCT_AREA as composite key of dso , data from attribute transformation is loaded as blank as there is no language filed in attribute data source ( 0FUNCT_LOC_ATTR ). Please let me know how can I design to accommodate both text for different language and functional area for open hub destination .
I know that I can create separate open hub destination for master data TEXT and Attribute.
Any help is highly appreciated.
Regards
Saikat

HI Saikat,
You can create an additional characteristics counter and make it a key field in the DSO.After that we can populate this characteristics in the end routine .It value would increase by 1 everytime different text comes for the same functional area.
Sample code
data: counter type n,
w_farea type /bio/oifunc_area.
Sort result_package by func_area.
count =0.
*checking whether we have the same functional area or we have a different functional area.
Loop at result_package assigning <Result_fields>.
if w_farea is initial or w_farea = <result_fields>-func_area.
count = count +1.
else
count =1.
endif.
w_farea= <result_fields>-func_area.
<Result_fields>-zcount = count.
ENDLOOP.
Clear w_farea.
This way the value of counter would get increased by one everytime a new text comes for the same functional area.We can have any number of texts for the same functional area by this method.
The only issue would be when some delta update comes for the existing text in this method.If you are doing a full load to the DSO from the datasource, then there would be no issue with this method.

[svn:fx-trunk] 7671: The SWF metadata tag has optional attributes widthPercent and heightPercent .

Revision: 7671
Author:   [email protected]
Date:     2009-06-09 07:31:19 -0700 (Tue, 09 Jun 2009)
Log Message:
The SWF metadata tag has optional attributes widthPercent and heightPercent. The expected format is "[ws]double%[ws]". For example, [SWF (backgroundColor="#FFFFFF", widthPercent="92%", heightPercent="81%", frameRate="60" )]. Don't blindly strip off the last non-whitespace char and allow the % to be optional.
QA Notes:
Doc Notes:
Bugs: SDK-21436
Reviewers: Pete
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21436
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java

CHTMLB dexcription tags and attributes

Hi everybody,
I am new in CRM WEb UI.
Do youk now where I can find description of the tags/attributes and some explanations /examples ?
Thanks in advance
In SE80 in the tag libraries I found all the tags from CHTMLB byut when I clik F1 on the tag or the attributes, I receive nothing .. is that normal ?
Thanks for your help,
Marie

.oO(gaurav_ch)
> @Michael Fesser - If IE does not support XHTML, this
means that it is
>rendering it as HTML inspite of the XHTML DOCTYPE used in
making pages? OMG!!!
>I really hate Microsoft for this. Thanks for telling me
this. I never knew that.
Exactly. IE accepts XHTML only if the server delivers it as
text/html.
But then it's not really XHTML anymore.
Real XHTML should be delivered as application/xhtml+xml,
which would let
modern browsers like Opera and FF use their XML parsers
instead of the
old and bloated tagsoup parsers, but until now IE doesn't
support this.
Not sure about the coming IE 8, though.
>Still my question is unanswered - do I really need to
learn each and every
>attribute of an xhtml element or each and every tag that
xhtml throws at me,
>from the point of interview or is it sufficient to know
those attributes and
>elements which make me make accessible websites and
validated markup?
You should know at least most of the elements and attributes,
so that
you can use them where appropriate. Same for CSS and its
properties. Of
course you can't (and don't have to) remember them all.
That's where a
quick reference guide or a "cheat sheet" comes in handy.
In my Opera browser for example I have these pages as sidebar
panels for
a quick lookup (should also work in FF):
http://people.opera.com/rijk/panels/html4.01-online/elem.html
http://people.opera.com/rijk/panels/css2.1-online/prop-visual.html
Here are some more panels with previews:
http://people.opera.com/rijk/panels/
You also might find some of these cheat sheets quite useful:
http://www.addedbytes.com/cheat-sheets/
Micha

Xhtml tags and attributes

Hi,
I was going through some xhtml reference text and found that
there are many attributes to xhtml tags that i did not knew of.
There were many tags which I never used. For eg.,
<big></big> and some attributes like <select
dir=""></select>.
What I want to know is that - do I really need to learn each
and every attribute of an xhtml element or each and every tag that
xhtml throws at me, from the point of interview or is it sufficient
to know those attributes and elements which make me make accessible
websites and validated markup?
What do you all suggest?
Gaurav
www.gauravchandra.info

.oO(gaurav_ch)
> @Michael Fesser - If IE does not support XHTML, this
means that it is
>rendering it as HTML inspite of the XHTML DOCTYPE used in
making pages? OMG!!!
>I really hate Microsoft for this. Thanks for telling me
this. I never knew that.
Exactly. IE accepts XHTML only if the server delivers it as
text/html.
But then it's not really XHTML anymore.
Real XHTML should be delivered as application/xhtml+xml,
which would let
modern browsers like Opera and FF use their XML parsers
instead of the
old and bloated tagsoup parsers, but until now IE doesn't
support this.
Not sure about the coming IE 8, though.
>Still my question is unanswered - do I really need to
learn each and every
>attribute of an xhtml element or each and every tag that
xhtml throws at me,
>from the point of interview or is it sufficient to know
those attributes and
>elements which make me make accessible websites and
validated markup?
You should know at least most of the elements and attributes,
so that
you can use them where appropriate. Same for CSS and its
properties. Of
course you can't (and don't have to) remember them all.
That's where a
quick reference guide or a "cheat sheet" comes in handy.
In my Opera browser for example I have these pages as sidebar
panels for
a quick lookup (should also work in FF):
http://people.opera.com/rijk/panels/html4.01-online/elem.html
http://people.opera.com/rijk/panels/css2.1-online/prop-visual.html
Here are some more panels with previews:
http://people.opera.com/rijk/panels/
You also might find some of these cheat sheets quite useful:
http://www.addedbytes.com/cheat-sheets/
Micha

Clipboard functionality and Multi Value in an attribute of component WD_SELECT_OPTIONS_20

Hi All,
Clipboard functionality and Multi Value in an attribute functionalities are not working.
I tried to look into the standard component and could not found relevant piece of code.
Our system is on 7.3 EHP1 SP9 but functionality does not seem to work.
Does anyone know in which EHP of 7.3 NetWeaver these functionalities are delivered.
Any note avalibale compatible with our system level?
Regards
Sounak

Hi All,
Clipboard functionality and Multi Value in an attribute functionalities are not working.
I tried to look into the standard component and could not found relevant piece of code.
Our system is on 7.3 EHP1 SP9 but functionality does not seem to work.
Does anyone know in which EHP of 7.3 NetWeaver these functionalities are delivered.
Any note avalibale compatible with our system level?
Regards
Sounak

CF10 CFML tag, functions and attributes autofill in Dreamweaver CS5.5

Similar Messages

Maybe you are looking for