CF9 Not Rendering Flash Charts

We just upgraded two Windows Server 2008 R2 servers, one development, one production, from CF7 to CF9 (9.01). Did the same installation on both. For some reason, the Dev server will not render charts (created in Web Charts 3D) in Flash, but will using JPG or PNG. However, the Prod server will render Flash, JPG or PNG.
Not sure how this can happen. Is there a setting for this? The Flash player is not installed on either server, as far as I can tell. Isn't it correct, that Flash player doesn't need to be installed on the server, but the client, for proper rendering?
Appreciate any tips/advice on this, or what to check. Thank you.
Gary

Could you plz check the JDK version you are using. It shud be more than 1.5_12 I guess. I had this issue, I upgraded the JDK I could see the graphs

Similar Messages

Excel Chart High-Low Lines Not Rendering when Chart Object Contains No NumCache and StringCache

I have a number of Excel xlsx files which contain a Chart object configured with High-low Lines. The High-Low Lines render without issue when the Number Cache & String Cache exist in the file. A process updating the files removes the Number
Cache and String Cache from the Chart Object. After this process has updated the files Excel no longer observes the High-Low Line configuration. I have verified that the files still contain the setting for the Chart to have High-Low Lines (<c:hiLowLines
/>). Excel does not recognize that the setting is set (not rendered when viewed or preserved in the file settings after saving in Excel). Excel does not present any errors and everything else works fine.
Reproduction of Issue:
1. Create an Excel Document containing a Chart Object with High-Low Lines enabled.
2. Manually edit the chart1.xml file (in the xlsx file), removing all the Number Cache and String Cache entries from the document (<c:numCache/>, <c:strCache/>).
3. Open the Document in Excel and view the Chart. It will not draw the High-Low Lines and if saved the file will no-longer contain the hiLowLines setting.
The issue has been confirmed in Excel 2010 and Excel 2013.

The issue has been tested on different computers, 11 in total. The OS ranges from Windows 7 to Windows 8.1.
I have not tried in other file formats. Due to the requirements of the project I'm restricted to xlsx.
The application interacting with the files is proprietary.
I've simulated the issue by removing the Number Cache & String Cache manually from the Chart1.xml file. This causes the issue to occur. I will note that if i only remove one of the cache entries from the file the High-Low lines will be observed
in Excel. It seems to only happen if all of the cache entries are removed. The file is never interpreted by Excel as corrupt under any of the modifications.
The issue seems like Excel fails to evaluate the High-Low Lines property when the cache is completely removed. I'm not sure what Excel is doing to negate the property under the condition of no cache. After the files is opened with Excel and saved
the High-Low Lines property no-longer exists in the file.

Can not display flash charts

The exception is" Unexpected end of file encountered. 4 bytes were requested and 0 bytes were read"
how to fix it?

Could you plz check the JDK version you are using. It shud be more than 1.5_12 I guess. I had this issue, I upgraded the JDK I could see the graphs

Flash Chart Legend Not In Capitals

I have created a flash chart based upon a function returning sql. The chart displays fine but the legend column names for some reason are converted to initial capitals from all originally being in capitals, eg "SERIES" now equals "Series". I really need the legend to display all capitals as it is in the sql.
For example:
The function returns a string similar to this .......
select NULL as "LINK",
WEEK as "LABEL",
VALUE1 as "VALUE1,
VALUE2 as "VALUE2"
from MY_TABLE
order by WEEK
When the flash chart is rendered on the page the legend displays the two series values as "Value1" and "Value2". Somehow the chart ignores the capital case of the column names and applies initial capitals only over riding the original case.
There appears to be no over ride for the legend case so where is it coming from ? It shouldn't make any difference but the chart type is a "3D column" style. Not sure if this is a XML question or maybe a Flash Player issue.
Regards,
Jack.

I had the same problem.
To fix it:
1. Find a font that is strictly caps. I used Felix Titling.
2. Edit the flash chart & under the chart attributes set USe Custom XML to yes.
3. Scroll down almost to the bottom and find the legend tag.
4. In the font tag for the legend substitute the font you chose.
This will capitalize ALL the letters in the legend.
I don't know how to selectively capitalize letters.
Bob Richards

Flash Chart Error "A Start-tag was not matched with an end-tag."

All of the Flash charts on a page started displaying the error "A Start-tag was not matched with an end-tag." The charts were all working prefectly and no changes were made to the page. Any thoughts?
Thanks.

Here is what I get when I click Show XML in debug mode. Thanks.
<?xml version="1.0" ?>
- <root>
- <styles>
<style type="background" id="background" background_type="solid" color="0xffffff" alpha="0" />
<style type="deal_background" id="dealBackground" enabled="yes" color="0xdddddd" alpha="100" />
<style type="deal_border" id="dealBorder" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style type="deal_position" id="dealPosition" left="146" top="169.1707317" />
<style type="deal_size" id="dealSize" startAngle="0" endAngle="180" innerRadius="0" outerRadius="109.5" />
<style type="indicator_background" id="indicatorBackground" enabled="yes" color="0x000000" alpha="100" />
<style type="indicator_border" id="indicatorBorder" enabled="yes" color="0xFFFFFF" thickness="1" alpha="0" />
<style type="scale_size" id="scaleSize" length="7.3" />
<style type="scale_position" id="scalePosition" radius="102.2" />
<style type="scale_lines" id="scaleLines" enabled="yes" thickness="1" color="0x000000" alpha="100" />
<style type="scale_labels_position" id="scaleLabelsPosition" radius="109.5" />
<style type="scale_labels_background" id="scaleLabelsBackground" enabled="no" />
<style type="scale_labels_border" id="scaleLabelsBorder" enabled="no" color="0x000000" />
<style type="scale_labels_text" id="scaleLabelsText" font="Verdana" size="10" color="0x000000" bold="no" italic="no" underline="no" align="right" />
<style type="scale_labels_size" id="scaleLabelsSize" />
<style id="areaBackground0" type="area_background" enabled="yes" color="0x669999" alpha="100" />
<style id="areaBackground1" type="area_background" enabled="yes" color="0xCCCCCC" alpha="100" />
<style id="areaBorder" type="area_border" enabled="yes" thickness="1" color="0xFFFFFF" alpha="100" />
<style id="areaBorder0" type="area_border" enabled="yes" thickness="1" color="0x666666" alpha="100" />
<style id="areaSize" type="area_size" outerRadius="105.85" innerRadius="36.5" />
<style type="circle_object_border" id="dotBorder" enabled="no" />
<style type="circle_object_position" id="dotPosition" left="146" top="169.1707317" />
<style type="circle_object_size" id="dotSize" radius="7.3" />
<style type="circle_object_background" id="dotBackground" enabled="yes" color="0x000000" alpha="100" />
<style id="emptyBorder" enabled="no" />
</styles>
- <shapes>
- <shape id="indicatorShape" type="polygon">
<point x="0" y="-4" />
<point x="-97.82" y="0" />
<point x="0" y="4" />
<point x="0" y="-4" />
</shape>
</shapes>
- <objects>
<circle sizeStyleId="dotSize" positionStyleId="dotPosition" backgroundStyleId="dotBackground" borderStyleId="dotBorder" />
</objects>
- <data>
<deal minimum="0" maximum="100" sizeStyleId="dealSize" positionStyleId="dealPosition" backgroundStyleId="dealBackground" borderStyleId="dealBorder" />
- <areas>
<area startValue="1" endValue="99" backgroundStyleId="areaBackground1" borderStyleId="areaBorder" sizeStyleId="areaSize" />
</areas>
- <scales>
<scale startAngle="0" endAngle="180" angleStep="18" labelsPrefix="" labelsPostfix="%" decimalPlaces="0" sizeStyleId="scaleSize" positionStyleId="scalePosition" linesStyleId="scaleLines" labelPositionStyleId="scaleLabelsPosition" labelBackgroundStyleId="scaleLabelsBackground" labelBorderStyleId="scaleLabelsBorder" labelTextStyleId="scaleLabelsText" labelSizeStyleId="scaleLabelsSize" />
</scales>
<indicator value="51.7412935" backgroundStyleId="indicatorBackground" borderStyleId="indicatorBorder" shapeId="indicatorShape" />
</data>
</root>

Flash chart with dynamic sql query does not display

Hi,
In my schema SIVOA I have a lot of tables declared like this :
CREATE TABLE "SIVOA"."EVV_xxxx"
   (     "CLEF_VAR" NUMBER(4,0),
     "DATE1" DATE,
     "VALEUR" NUMBER(16,8) Only the last part of the name changes "xxxx". For example E009, E019, etc....
I am making a chart page with report and want the user to select a name of a table and I will display using dynamic sql query, the table report and chart.
P184_ENAME is a select list returning the last part of the name of the table, fro example 'E009', 'E019', etc.
P8_CLEF_VAR is an item containing a value. This value is a key retrieved like this :SELECT CLEF_VAR
FROM SIVOA.SITE_ECHELLE
WHERE SITE = :P184_ENAMEI built a classic report using a sql dynamic function :DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = :p8_clef_var' ;
RETURN (x);
END;:p8_clef_var is an itme containing the value '4544'.
This works perfectly fine !
When I use this sql fucytion into a flash chart it does not work. I get this message "No data found".
I do not understand why a the report get a result and not the chart !
But if i hard-code the number of the CLEF_VAR instead of fetching it from :p8_clef_var I get a nice chart ! Go figure !DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = 4544 ' ;
RETURN (x);
I cannot stay with the key (CLEF_VAR) hard-coded unformtunately !
My question is how to get the chart displaying properly ??
Thank you for your kind answers.
Christian

Alex,
Using your request, with the classic report I get results (data), but I get the same message with the Flash chart : "No data found" ! I don't know how to investigate this. i tried many things but nothing works.
Christian
PS I tried this :
DECLARE
   X   VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, ROUND(VALEUR,2) FROM SIVOA.EVV_'
      || UPPER (:p184_ename) ||
      ' WHERE CLEF_VAR = '
      || :p8_clef_var ||
      ' AND DATE1 BETWEEN TO_DATE ('''
||:P8_DATE_DEBUT||''', ''DD/MM/YYYY HH24:MI'') AND TO_DATE ('''
||:P8_DATE_FIN||''', ''DD/MM/YYYY HH24:MI'')'
RETURN (X);
END; But it does not work either. I could find that the SLQ syntax generated is good becaus I put it into an item which display the return done by the pls/sql.
What is sttange also with the classic report is that if I do click on next or previous to see another rows, I get the message "No data found". If I try to export the report I get an excel file with "No data fouid".
Does anybody already tried my "need" here ? i find strange thant I should not be the firs one trying to get a report an tables which name would be "dynamic".
Tahnk you.
Edited by: Christian from France on Feb 13, 2009 3:05 AM

Flash Forms Not Rendering in IE7, Flash 9

We're having a problem with flash forms in IE7 and Flash
Player 9 not rendering the entire form. The form works fine in
Firefox 2. It looks to be a problem with how the Flash player is
able to pull back data in IE7. Likely this pertains to how IE7
handles security of plug-ins.
Oddly, we've noticed that uninstalling the Flash 9 player and
then reinstalling results in the form rendering correctly the first
time, but on subsequent views the form no longer renders correctly.
Specifically, we're not seeing data that is being called via
Flash remoting in cfselect tags (state and country information).
And we're not seeing text rendered that is in cfformitem tags. Our
dev url is:
http://hopeequity.beaconfire.com/loggedout/index.cfm?event=StartInvesting_StartAGroupStep1
If anyone has an idea of why IE7 might not be able to render
the form correctly, or might have security-related issues with
remoting and Flash 9, please reply.

I was granted access to the manuals on our prod server (the
site is set up where you have to log in to see the manuals). The
manuals are behaving differently on the prod server than in our dev
server. The following is happening on the prod server:
- the flash menus are appearing on our prod server in FireFox
only.
- I had reported in our dev area that when I right clicked on
the left hand side where the menus are to appear in IE that the
Flash menu displayed. This is not the case in our production area.
- I get the "This page contains both secure and nonsecure
items" when viewing the site on our prod server through IE
I've asked them what version of RoboHelp they are using and
no one seems to know. It seems they don't regenerate their help
files (manuals) very often.

Flash chart does not appear on the PC of a user

Hi,
I have an application which is working nicely. But suddenly, one user cannot see the flash charts on his PC. On my PC it works well, I can see the charts. I don't know why on his PC the flash chart do not appear. She is using IE 6.
The application is using APEX Anychart 5.12.
How to check if Flash is working well on his PC ?
Regards,
Christian

I think that PC is missing the flash plugin.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Flash not rendering in 100% in Firefox

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3265183615_52741
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi!
I have a pop up window which goes full screen when opens
(index_pop.html).
In index_pop.html I have a flash movie (swf) set to 100%. It
is meant to
take over the screen entirely. The problem I have is in
Safari and IE, it
works fine but when tested on Firefox, it is this tiny movie
while
index_pop.html opens to a full window. Is there anyway I can
work around
this?
Thank you.
°K.
--B_3265183615_52741
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Flash not rendering in 100% in
Firefox</TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Arial"><SPAN
STYLE=3D'font-size:12.0px'>Hi!<BR>
<BR>
I have a pop up window which goes full screen when
opens (index_pop.h=
tml). In index_pop.html I have a flash movie (swf) set to
100%. It is meant =
to take over the screen entirely. The problem I have is in
Safari and IE, it=
works fine but when tested on Firefox, it is this tiny movie
while index_po=
p.html opens to a full window. Is there anyway I can work
around this? <BR>
<BR>
Thank you.<BR>
<BR>
<BR>
<B>°K.</B><BR>
</SPAN></FONT>
</BODY>
</HTML>
--B_3265183615_52741--

This is a multi-part message in MIME format.
------=_NextPart_000_0008_01C7B32E.D63789E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Flash not rendering in 100% in FirefoxKelvin,
This may be due to your HTML document's DOCTYPE. See this
brief =
article for details.
http://www.quip.net/blog/2006/flash/how-to-fix-wrong-sized-firefox/
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."
"Kelvin Chen" <[email protected]> wrote in message
=
news:C29EBF7F.828F%[email protected]...
Hi!
I have a pop up window which goes full screen when opens =
(index_pop.html). In index_pop.html I have a flash movie
(swf) set to =
100%. It is meant to take over the screen entirely. The
problem I have =
is in Safari and IE, it works fine but when tested on
Firefox, it is =
this tiny movie while index_pop.html opens to a full window.
Is there =
anyway I can work around this?=20
Thank you.
=B0K.
------=_NextPart_000_0008_01C7B32E.D63789E0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD><TITLE>Flash not rendering in
100% in Firefox</TITLE>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16481"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial
size=3D2>Kelvin,</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2> This may be due to =
your HTML=20
document's DOCTYPE. See this brief article for =
details.</FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial
size=3D2> <A=20
href=3D"
http://www.quip.net/blog/2006/flash/how-to-fix-wrong-sized-firefo=
x/">
http://www.quip.net/blog/2006/flash/how-to-fix-wrong-sized-firefox/</=
A></FONT></DIV>
<DIV><FONT face=3DArial
size=3D2></FONT> </DIV><FONT
face=3DArial =
size=3D2>
<DIV><BR>David Stiller<BR>Adobe Community
Expert<BR>Dev blog, <A=20
href=3D"
is the=20
residue of good design."</DIV>
<DIV></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"Kelvin Chen" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>>
=
wrote in=20
message <A=20
=
href=3D"news:C29EBF7F.828F%[email protected]">news:C29EBF7F.828F%kelvi=
[email protected]</A>...</DIV><FONT=20
face=3DArial><SPAN style=3D"FONT-SIZE:
12px">Hi!<BR><BR>I have a pop =
up=20
window which goes full screen when opens (index_pop.html).
In =
index_pop.html I=20
have a flash movie (swf) set to 100%. It is meant to take
over the =
screen=20
entirely. The problem I have is in Safari and IE, it works
fine but =
when=20
tested on Firefox, it is this tiny movie while
index_pop.html opens to =
a full=20
window. Is there anyway I can work around this?
<BR><BR>Thank=20
=
you.<BR><BR><BR><B>=B0K.</B><BR></BLOCKQUOTE></SPAN></FONT></BODY></HTML>=
------=_NextPart_000_0008_01C7B32E.D63789E0--

Flash Charts not working after 3.1 install

I installed Apex 3.1 and ran the sample application. Everything seems to work fine except the chart page. I get some lines but no graph. I am using the PL/SQL gateway if that makes a difference. This is the first time I've not used the HTTP server.
Has anyone else had this problem?

user447071,
I would check:
1) Can you access the flash files directly? Look at the page's HTML to find reference to an SWF file, then try to access that from the URL.
2) Is the XML coming back properly? Run the page in debug mode, then click the "Show XML" link after the Flash chart.
- Marco

APEX Flash Chart labels not displaying

Hi there
I am trying to create a 2D Stacked Column Flash chart, it is month based and for each month I have 3 Columns
So the query for the series returns a result set like so..
'Jan-11_Col1',10
'Jan-11_Col2',20
'Jan-11_Col3',30
'Feb-11_Col1',10
'Feb-11_Col2',20
'Feb-11_Col3',45
'Dec-11_Col1',20
'Dec-11_Col2',80
'Dec-11_Col3',100
I want to display a chart where the first column of the result set is my x-axis and the second column is my y-axis. I have have created the chart but I find I don't get a label for every columm on my x-axis, I only get one for every third column, and I can't see a way of doing it, can anybody tell me how?
thanks... Anil
ps I am using APEX 4

Hi Anil,
I have seen similar behaviors in 2D Column Charts. What I have found is that most often, for me, the issue has been that the chart is not wide enough. This is not specifically an APEX issue but rather a Flash issue. When the chart exceeds the dimensions that you specify for the chart, the charting engine must squish some part of the chart. Most often, the labels are what get removed, in my experience.
There are options to investigate this. You can make the chart wider in APEX and see if the problem goes away. You could rotate your X-Axis text by 45 degrees or so to see if they all appear. I have also seen the labels appear when you use your browser to zoom feature. This is a Flash behavior as well. If you zoom your browser to 200%, you may see more of your labels.
Finally, it would appear from your sample data set, that you may not be getting stacked column. Is that the case? If you are getting a single column for each record in your data set, then you probably have 36 columns on your chart which is a lot. You will need to make the chart very wide in APEX and possibly rotate the labels.
If you need help with anything else, just ask.
Austin

Apex Flash Chart Not showing all rows

I am using APEX 4.0.2 and have created a flash chart. I added a scroll bar, but don't get all of the rows that I expect. I ran the sql in a PL/SQL develoepr session and get all of the expected data. Where do I tell APEX to return all data found?
Thanks!

Thanks for the reply!
This tool is so robust, its easy to overlook what is right in front of you.
Second half of the question:
I have about 1500 rows reporting in the horizontal chart. It seems that the chart has to be sized HUGE to keep the chart readable even though there is a scroll bar. Is there a way to force the hight of each horizontal bar rather than what it appears to be doing, which is shrinking each bar to the point it's not readable.
Thanks!

The flash chart Link not opening in oracle Apex 4.1

I have created a flash chart (Pie chart ) on the latest version 4.2.
Everything is workinfine when I have created a hidden item and associated a computation to it and added that in custom color option in chart attributes
I am able to customize this again in this version
But When I have done same thing in Apex 4.1
I am able to see the output .but When I try to change the color and click on chart attributes it throws an error showing no data found
Kindly help me in solving this error .

Hi,
To assist in resolving your issue, could you please outline the steps you've carried out in your 4.1 environment? Also, could you please confirm exactly what version of APEX you are referring to - 4.1.0 or 4.1.1?
Regards,
Hilary

Auto refresh flash chart not working (APEX 3.1)

Hi All
I followed the instructions on how to update auto refresh flash charts on the following page:
http://www.inside-oracle-apex.com/2007/04/auto-refresh-flash-charts-in-apex-30.html
Is there anything else that needs to be done? I dont get a 'last refreshed' date, nor does the chart refresh itself.

user447071,
I would check:
1) Can you access the flash files directly? Look at the page's HTML to find reference to an SWF file, then try to access that from the URL.
2) Is the XML coming back properly? Run the page in debug mode, then click the "Show XML" link after the Flash chart.
- Marco

Apex flash Chart not working after upgrade to #5.1.3

Hi,
I am using oracle apex 4.0,database11g and i upgraded the apex flash chart to #5.1.3, also i am using the partial page refresh (html_PPR_Report_Page) in every 5 sec time interval.
However after about 5 seconds the charts dissapear and never come back unless you manually refresh the browser.
Could y please suggest.
Regards,
Saroj

Like junkyardheart, mine cleared up. After talking with tech support for 2 to 3 hours trying all kinds of things they opened a ticket to have a technician checkout the local cell tower. The next day tech support called me and I told them it was worse. Then they had started looking at my past reports on "Mark the Spot" app and open several more tickets and had a crew checkout the area.
I received a call two days later and they had two bad cell sites. With the next day being Saturday they had the whole weekend scheduled as an outage to fix the problems. By noon on Saturday everything was great.
I even checked out my download speed using a few speed apps and I was pulling 2-3 Mbps down and pushing 1+ Mbps up.
I think the update exposed a serious problem that had existed for a while.

CF9 Not Rendering Flash Charts

Similar Messages

Maybe you are looking for