CFCHART gives different display in 6.1 and 7.0.2

We have CFMX 7.0.02 installed on AIX plat form. This was
recently upgraded from MX 6.1. After the upgrade the CF chart
display doesn't work fine. The same code give fifferent display in
2 versions. The Bar chat is shown as lines and the X axis entries
are missing some times.
The code is shown below. The same code gives barchart in 6.1
and shows lines in 7.0.2. The colors are different in both the
versions.
<html>
<body>
<cfchart Format="flash"
chartHeight="250"
chartWidth="400"
showXGridlines = "no"
showYGridlines = "yes"
gridlines="5"
xOffset="0"
yOffset="0"
dataBackgroundColor= "##CECFFF" showborder="no"
font="Arial"
fontsize="12" fontbold="no" fontitalic="no"
labelFormat = "currency"
show3D="yes" rotated="no" sortxaxis="no"
showlegend="no"
showmarkers="no"
backgroundColor = "##CECFFF">
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jun" value="100">
</cfchartseries>
</cfchart>
<br>
<cfchart Format="flash"
chartHeight="250"
chartWidth="400"
showXGridlines = "no"
showYGridlines = "yes"
gridlines="5"
xOffset="0"
yOffset="0"
dataBackgroundColor= "##CECFFF" showborder="no"
font="Arial"
fontsize="12" fontbold="no" fontitalic="no"
labelFormat = "currency"
show3D="yes" rotated="no" sortxaxis="no"
showlegend="no"
showmarkers="no"
backgroundColor = "##CECFFF">
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 May" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jun" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jul" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 aug" value="100">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Sep" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Oct" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Nov" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Dec" value="100">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Jan" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Feb" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Mar" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Apr" value="100">
</cfchartseries>
</cfchart>
</body>
</html>

Hi Ken,
Thanks for the response. Couple follow up questions:
As far as the migration/configuration wizard goes, here is
what I am looking to migrate:
- Data Sources
- custom tags
- email server setup
- missing template settings
- Java and JVM -- Server Settings
I think that's it. So, given that, what would the below
adminConfig.xml need to look like? Again, I am upgrading from MX6.1
to MX7.0.2. Let me take a stab at it:
<setupconfig>
<runsetupwizard>true</runsetupwizard>
<runmigrationwizard>false</runmigrationwizard>
<runmxmigrationwizard>true</runmxmigrationwizard>
<migratecf5>false</migratecf5>
<migratecf6>true</migratecf6>
<setupoptions>
<sampleapps>false</sampleapps>
<odbc>true</odbc>
<enablerds>false</enablerds>
</setupoptions>
</setupconfig>
My second question might be irrelevant, but I am curious. The
way it is setup now, I can't get into the CF Admin page (since the
uninstall of CFMX7 removed it), but I know I am running 6.1 because
I tried to hit a test page with a <CFDOCUMENT> tag, and CF
said it didn't know what that tag was. But, when I go into IIS and
look a the Application Configuration for .cfm extensions, it has a
mapping to C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll. Any
ideas?
Thanks so much for your help.
-tom

Similar Messages

ABAP WD: Different display in Test window and enterprise portal

Hi,
I am using Table and TreeByNestingtable column in ABAP webdynpro(Basis 710 release). When I run the application using test, table captions are not in bold and there is no difference between TreeByNestingtable column and other columns in background color.
But when I display the same component in Enterprise portal using iview(EP 6), the table captions appear in bold and TreeByNestingtable column and other columns appear in different background color.
Has anybody encountered this issue? And how do we resolve it?
Regards,
Srini.

Please see OSS Note 903662 on restrictions and steps for running ABAP Web Dynpro in older releases of the portal. In particular you should disable the portal style sheet.

Different display page layout in Display Layout mode and in Preview mode

Hi everyone,
can anybody help me to understand why it is different display page layout in
Display Layout mode:
I have 2 collumns
and in Preview mode:
I have only one column
is there some option that I didn"t check in layout page properties?

The only thing you can try, is to have a defined number of lines, where the last line only consists of a few words. That may(!) give enough room for different browser rendering. But there is definitely no guarantee.
You may as well force the text frame to be converted to an image (Place one single character – point, space – out of a system font. This will force Muse to convert the text into an image – thus preventing txt reflow)

My iphone won't let me update or download apps and it keeps asking me to sign in and give different billing info.

My iphone won't let me update or download apps and it keeps asking me to sign in and give different billing info.

it declines it when u put in a different card that has $ available on it? have u updated the billing address to match the new card?
also, u can try using an itunes gift card instead.

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

tbreezy wrote:
THANK U!! K ONE MORE QUICK QUESTION. HOW DO I GET RID OF THAT POP UP BOX?
Not sure, try googling "the global template normal.dotm is already open as an add-in program"

Why not exists and minus give different result

HI,
I am writing thes query by using two different operators they should give me the same output but they dont. Please can anybody explain why they give different output.
query 1
SQL> SELECT COUNT(*) FROM
2 (select orig_idx
3 from rel15_au_poi a
4 MINUS
5 SELECT ORIG_IDX
6 FROM REL14_1_AU_POI_INTERM B) ;
COUNT(*)
244312
query 2
SQL> select count(*)
2 from rel15_au_poi a
3 where not exists
4 (select null from rel14_1_au_poi_interm b where a.orig_idx=b.ORIG_IDX) ;
COUNT(*)
245341
best Regards,

Because you have duplicates in rel15_au_poi which are counted with exists and removed with minus.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/queries004.htm#sthref3147
MINUS Example
The following statement combines results with the MINUS operator, which returns only unique rows returned by the first query but not by the second:
SELECT product_id FROM inventories
MINUS
SELECT product_id FROM order_items;

TTF and OTF versions of SourceSansPro are differently displayed in Swing (Nimbus L&F)

Can you confirm this?
I am using Java SE 7 U 25 on Windows 7 Pro 64bit
When I switch between the otf and the ttf version of the same font (Source Sand Pro by Adobe) then I see some differences (see the space above the "O")
But why? Is this a bug? My Java app uses the Swing L&F Nimbus
https://github.com/adobe/source-sans-pro/issues/32
java - TTF and OTF versions of SourceSansPro are differently displayed in Swing (Nimbus L&amp;F) - Stack Overflow

I know. But I have tried it also with another font - same problem
Take a look at https://github.com/adobe/source-sans-pro/issues/32#issuecomment-23402790
There is indeed a bug with the display of ttf/otf fonts in Java / Swing

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

My iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Can anybody give me the difference between Catt and Ecatt

Hi gurus,
Can any body give me the difference between catt and ecatt.

Hi,
I think this is new technology in sap.
I know little bit of this can u go through this.
eCATT (extended Computer Aided Test Tool)
What is eCATT?
eCATT is an SAP Testing Tool used to automate & test business scenarios in R/3. Each test generates a detailed log that documents the test process and results. If the testing is smooth without any errors, this means that the business scenarios mapped in R/3 are correct. If the test results in error then the problem can be analyzed using the error log that is generated.
eCATT enables automatic testing in SAP GUI for Windows and SAP GUI for Java.
Features of eCATT:
Following functions can be performed using eCATT:
Test transactions, reports and scenarios.
Call BAPIs and function modules.
Test remote systems.
Check authorizations (user profiles).
Test updates (database, applications, GUI).
Set up customizing tables.
Test the effect of changes to customizing settings.
Perform load testing.
Check system messages.
Integrated with Test Workbench, so allows proper management of scripts using SCAT transaction.
Supports CATT migration to eCATT.
All eCATT Objects are Repository Objects. Therefore one can take advantage of Standard SAP Transport Tools.
eCATT Objects can easily download & upload in XML with XSD format.
There can be several versions of Test Scripts, which allows different implementations with different releases.
The separation of Test Scripts, Test Data & System Data allows for a considerable degree of reuse.
Why eCATT?
CATT is no longer supported by SAP for the creation of new developments. Hence all the test scripts developed in CATT are now need to migrate/Update to eCATT. Comparative to manual testing, the following are advantages of using eCATT:
Due to automation, testing time is reduced to a large extent.
Due to automation, less manpower is required for testing. This helps financially.
Due to automation, manual errors are reduced to large extent. Hence results in error free testing. This helps, as no further problems will occur while the usage of R/3 system by end users and hence increases the efficiency.
Proved to be extremely useful in implementation projects.
In regression testing, automated test scripts are an ideal method of quickly detecting errors. Automatic test logs make it easy to reproduce test results, enabling fast analysis and planning of further activities, leading to cost savings for the customer.
Differences between CATT and eCATT?
Till date, CATT could only be used with the R/3 system. eCATT (which is available with SAP Web Application Server 6.20) covers the automatic testing in SAPGUI for Windows and SAP GUI for Java. For other GUIs and Applications, eCATT provides an interface for external tools. This allows companies to perform automated tests from an SAP system in a complete IT solution landscape across system boundaries. These new options enable complete automation of solution landscapes under standard Windows and Web-based user interfaces- resulting in low-cost operation of an IT Solution.
eCATT (extended Computer Aided Test Tool)
eCATT requisites
Web Application Server (WAS) 6.20 or more.
SAPGUI 6.20 or more.
R/3 4.6C or more. (Target system must have sufficient support package level (Details available in SAP Note 519858) or SAP R/3 Enterprise Release 4.7).
Before creating Test Scripts using eCATT, some system settings need to be done:
Maintain table T000.
1.      Go to transaction SM31
2.      Enter T000 and chose MAINTAIN.
3.      In the Change View Clients: Overview screen, select the relevant client and choose Details
4.      In the CATT and eCATT Restrictions field, select CATT and eCATT allowed.
5.      Click on SAVE.
Enabling scripting at the Front-end
1.      On any SAP GUI screen, choose Customizing of Local Layout.
2.      Choose Options
3.      Choose Scripting Tab
4.      Select Enable Scripting
5.      Click Apply and then OK.
Enabling Scripting on the Application Server
1.      Go to transaction RZ11.
2.      On the Maintain Profile Parameters screen, enter sapgui/user_scripting.
3.       Choose Display.
4.      If the Current Value is not set to TRUE, then click on Change Value:
5.      Enter TRUE in the New Value.
6.      Click on SAVE.
eCATT is an SAP Testing Tool used to automate & test business scenarios in R/3. Each test generates a detailed log that documents the test process and results. If the testing is smooth without any errors, this means that the business scenarios mapped in R/3 are correct. If the test results in error then the problem can be analyzed using the error log that is generated.
eCATT enables automatic testing in SAP GUI for Windows and SAP GUI for Java.
Features of eCATT:
Following functions can be performed using eCATT:
Test transactions, reports and scenarios.
Call BAPIs and function modules.
Test remote systems.
Check authorizations (user profiles).
Test updates (database, applications, GUI).
Set up customizing tables.
Test the effect of changes to customizing settings.
Perform load testing.
Check system messages.
Integrated with Test Workbench, so allows proper management of scripts using SCAT transaction.
Supports CATT migration to eCATT.
All eCATT Objects are Repository Objects. Therefore one can take advantage of Standard SAP Transport Tools.
eCATT Objects can easily download & upload in XML with XSD format.
There can be several versions of Test Scripts, which allows different implementations with different releases.
The separation of Test Scripts, Test Data & System Data allows for a considerable degree of reuse.
Why eCATT?
CATT is no longer supported by SAP for the creation of new developments. Hence all the test scripts developed in CATT are now need to migrate/Update to eCATT. Comparative to manual testing, the following are advantages of using eCATT:
Due to automation, testing time is reduced to a large extent.
Due to automation, less manpower is required for testing. This helps financially.
Due to automation, manual errors are reduced to large extent. Hence results in error free testing. This helps, as no further problems will occur while the usage of R/3 system by end users and hence increases the efficiency.
Proved to be extremely useful in implementation projects.
In regression testing, automated test scripts are an ideal method of quickly detecting errors. Automatic test logs make it easy to reproduce test results, enabling fast analysis and planning of further activities, leading to cost savings for the customer.
Reward points if it is helpful.
Rgds,
P.Nag

No virtual desktops in Win10 (please fix)?: Dangerous game promoting app switching on different displays as virtual desktops

Seems virtual desktops are overpromoted - and in fact not about virtual desktops (changing content on the desktops). The socalled virtual desktops are right now
no more than app switching on different displays.
Dangerous game again from Microsoft promoting things as something they are not.
Virtual desktops are already a well-defined concept - and people will expect the desktop to be able to change content (be dynamic) ... the data and launching programs for documents, different backgrounds.
... but as others may already have stated in other threads: (Right now) Windows 10 does not contain virtual desktops/displays/screens. Not at all.
A skeptical hypothesis - hopefully it is not so, and we will be able to work with data in a valuable way. The data is on the desktop anyway today - so why not make it real virtual desktops? I simply do not understand the decision.
So here comes the skeptical hypothesis - it's not a Steve thing. It's Microsoft still looking for that next revamped business model to finance their future.
So the freak kind of virtual desktops (virtual desktops in Win10 a lie?) will disappoint - have already begun to do so - and seems Microsoft is just taken up with inserting an additional intermediary step towards relaunching the appstore and hiding
all the user data in cloud again. Really, hiding the difference between data availability - not making the cloud something MORE but making the local system something LESS. The NEXT BIG thing? So we're going to loose file system, folders and the general ability
to form concepts of our own - and get a freak system? The NEXT BIG thing - data integration? Because data was hidden away now. Also in local systems. Artificially creating new problems - rather than solving new interesting ones?
We need to able to pin the data onto the display whether desktop, start screen, what ever. It's also on the feature requests. Desktops/Start Screen/Original displays for workflows/whatever actual starting points on login ... needs to have
more links than application from appstores and application containers linked to them.
If any more app (read: not cloud, data) but appstore, appstore, appstore
application containers hiding the data away comes into the UI I am going with Linux. I am that close ...

A better name would be Virtual Display Layouts ... Virtual Screens ... Virtual Start Screens (please let us be able to pin files/folders to the Start Screen, a requested voted for feature for Windows 10).
You see, go back and read the topics for Windows 8 ... you will learn the Start Screen is/was the new desktop - and should have been made virtual.
So please get your act together and stop confusing everything ... and make on coherent system. Drop the Start Screen - and go with the virtual desktop
(put the Start Screen technology into the virtual desktop - and let users pin folders and files there as requested ... both local and in the cloud)

Different LOVs in af:query and af:form for the same VO attribute

Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?

We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel.

HI all pls give me diff btwn upload ws_upload and GUI Upload

HI All,
         pls give me difference between
        upload
        ws_upload and
        GUI Upload
Thanks & regards .
Bharat Kumar

Hi,
WS_* Function modules are replaced by GUI_* FMs from 4.7 SAP version.
GUI_* modules have additional parameters when compared with WS_* FMs.
Both FM are used for uploading data .
But ws_upload is obsolete now .
WS_UPLOAD and WS_DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. WS_UPLOAD and WS_DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
WS_UPLOAD, GUI_UPLOAD FMs are used in BDCs.
WS_UPLOAD loads files from the Presentation Server to Internal ABAP Tables.
This is used upto SAP 4.6 version.
GUI_UPLOAD is used to loads a file from the PC to the server. The data can be
transferred in binary or text format. Numbers and data fields can be
interpreted according to the user settings.
You can check this for some info
http://help.sap.com/saphelp_erp2005/helpdata/en/79/c554a3b3dc11d5993800508b6b8b11/frameset.htm
http://www.sapdevelopment.co.uk/file/file_otherpc.htm
Regards,
Priyanka.

CFCHART gives different display in 6.1 and 7.0.2

Similar Messages

Maybe you are looking for