Different display page layout in Display Layout mode and in Preview mode

Hi everyone,
can anybody help me to understand why it is different display page layout in
Display Layout mode:
I have 2 collumns
and in Preview mode:
I have only one column
is there some option that I didn"t check in layout page properties?

The only thing you can try, is to have a defined number of lines, where the last line only consists of a few words. That may(!) give enough room for different browser rendering. But there is definitely no guarantee.
You may as well force the text frame to be converted to an image (Place one single character – point, space – out of a system font. This will force Muse to convert the text into an image – thus preventing txt reflow)

Similar Messages

Parameter Page Displays "Page Cannot Be Displayed" while running report

Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
Nagaraj

Parameter Page Displays "Page Cannot Be Displayed" while running report

Macbook spontaneously goes into sleep mode and screen off mode

Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
Any ideas as to how I might rectify the problem? Thanks very much in advance,
Danny

When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

How to print Neat mode and Quick & Draft Mode.

Hi,
How we can Print Neat Mode and Quick & Draft Mode. We are Using OKI DATA Micro LIne Dot Matrix Printers SAp B1 43 2005 B. Wethere we need to Install Drivers for Draft Mode.
Please give me your Advise. if set Draft mode in Printers it automatically Changeing to another one how we can set in PLD's are Printers.
Regds,
Samapth Kumar Devunuri.

Hi Samabth,
please note that only specific matrix printers are supported for SAP Business One, for instance for 2007A those are: Citizen PROdot 300 and Epson FX-880.
Please see the Administration Guide for this information.
Rgds,
Julius

[Forum FAQ] Troubleshoot the error "The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode"

Symptom
RD License server is a key component of RDS. It licenses users to access RDS servers.
After purchase the required RDS CALs, we need to activate the RDS License server and install the purchased RDS CALs. However, during the installation or after installation, we may face errors
about RDS License.
In most cases, the following error may occur.
Error:
The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server "Server name" does not have any installed licenses with the following
attributes:
Product version: Windows Server 2012
Licensing mode: Per User
License type: RDS CALs
Troubleshooting
1. Check whether the RD License Configuration is configured properly and there are no Warnings in the Event.
2. The License Server should be part of 'RD Server License' group in Active Directory Domain Services.
3. Check if the Licensing Mode is correct.
- To change the Licensing Mode we can use RD Licensing diagnose, PowerShell cmdlet and Group Policy.
Via PowerShell cmdlet:
To change the licensing mode on RDSH/RDVH:
$obj = get-wmiobject -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value)
# Value can be 2 - per Device, 4 - Per user
Via Group Policy
Path: Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
Use the specified RD license servers = FQDN of server name
Set the Remote Desktop licensing mode =
Per User
However, if issue persists, please provide detailed information and post the question in the
Remote Desktop Services (Terminal Services) forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Richard,
You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
Thanks,
Umesh.S.K

AutoTrim & Include Subfolders From A Folder & Preserve Subfolder Structure & Auto Shut Down Computer - ALL In Batch Processing Mode And Match Volume Mode ?

Hi! I salute you all!
First of all I want to excuse my english (it's not my native language)!
In 2014 we are dealing with thousands of files (video, audio, etc.), because of the present powerful technology, still... we are missing very important and useful parts for doing our jobs properly and very quickly!
In this case is Adobe Audition too, in my oppinion!
Adobe Audition is a great program, which help us to edit in many ways our audio files, but... unfortunatelly has major missing parts, which would be nice to be implemented as soon as possible!
Some of them are are right below this line:
1. AutoTrim (for removing silences from audio files, before and after)
2. Include Subfolders From A Folder (when adding a folder for working with, we should have the possibillity to add its subfolders too)
3. Preserve Subfolder Structure (when exporting a folder with its all subfolders, we should have the possibillity to export the exact structure like the original)
4. Auto Shut Down Computer (when all the tasks/jobs are done, we should be able to auto close the program and auto shut down our desktop/laptop as well)
When you will add these features which are so wanted, to have them all in Batch Processing mode and Match Volume mode as well, please?!
Many other audio softwares have all of these "old" possibillities, like "GoldWave" for instance (I am not advertising it at all), but the Adobe Audition which is more complex...doesn't so far!
I thank you all and I really wait for these very next future feature requests!
Have a nice day!
P.S.: Is this message/question read by Adobe stuff members (persons who can take decissions in this way) too, or only by us, the comunity members?!

Hello Kavans,
Thank you for the details of the issue you are experiencing with your MacBook Pro. I recommend reviewing the following article for this issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Thank you for using Apple Support Communities.
Best,
Sheila M.

When using Flash Player 11.4 and IE9, some sites display "Page cannot be displayed"

I am also having the similar problem with IE9 on windows 7 x64. IE9 showing "Page canno tbe displayed" for some of the sites (one of them is netbanking site for ICICI), however if I disable the shockwave flash object in addons, everything works fine just flash content is not dispalyed.
I tried every bit of setting for other browser these sites are working. I tried chrome.
Any solution? I already on the latest flash playe.
It is very annoying to first disable the flash then access these sites and then reenable it.

Jeromie/Chris-
Appreciate the effort to create this util, but this isn't a valid solution. Up until 11.3, there was no issue installing Flash regardless of the user profile that you were logged in as. That obviously changed in one of the 11.4 builds. Considering Flash is one of the MOST attacked and exploited pieces of code on user's PCs; as evidenced by all of the updates, these updates need to be quick and seemless without all of the extra steps which you are describing. Please dedicate some staff to review the code and figure out where the permissions problem is so all of us can stop wasting our time with this issue. Your installer should be able to write the necessary ACLs to eliminate this problem without having us jump through all of these extra hoops.
Again the problem stems from the fact that our users run as standard users and do not have rights to install software. Keeps our network nice an clean for the most part. Whenever staff visits a PC, they apply the latest version of Java and Flash using an admin account. Until version 11.4 this worked fine. Now if we are not logged in as the user (all accounts are in AD domain) it will appear to work fine, until the user logs back in. The solution we have found is to uninstall Flash, login as user accout and install with elevated perms.

Correctly Hide Edit Mode Elements in Preview Mode

Hello,
I wanted to know how I should modify the code below to correctly show content in the correct mode? The code below works, but when switching to preview mode, I have to manually refresh the page to get the "Preview/Publish mode text" to disappear. I'm aware I could modify the sidekick to force a refresh, but I'd prefer to do it similarly to how CQ does it (eliminate all edit mode components immediately without refreshing the page). Thoughts?
import="com.day.cq.wcm.api.WCMMode"
<%
    if ((WCMMode.fromRequest(request) == WCMMode.EDIT) || (WCMMode.fromRequest(request) == WCMMode.DESIGN)) {
        %><div>Edit mode only text</div><%
    } else {
        %><div>Preview/Publish mode text</div><%
%>

Hi,
As the above code is evaluated server side and edit/preview is triggered client side this approach will not work for you.
You could use the fact that CQ is adding "cq-wcm-edit" class to page body in edit mode and "cq-wcm-preview" in preview and hide your divs by CSS.
Br

Phone rings even in silent mode and in vibrate mode

Whenever I get a call on my xperia z1 compact it rings even when phone is in silent mode. I even tried to it in vibrate mode, still the phone rings. So every time I want my phone to be in silent mode I have to put the airplane mode on. It's very irritating. Plz help me.
Solved!
Go to Solution.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Do you experience the same behaviour if you boot your phone into safe mode and uses it in silence/vibration mode?
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Canon Vixia HV 40 HDV mode and HD 24f mode help

Hi everyone,
I just did a 2-camera shoot-- problem is, I shot in HDV mode, and my partner shot in HD24f.
I am new to HD--how can I cut footage from both modes and not have them look different?
Are there capture issues between the two modes? Thanks for your help!

I'm not familiar with the cameras, but a quick look says both are HDV and likely either 30 or 24 fps.
You should be able to Log and Capture using the appropriate HDV codec. Depending on the performance of your capture machine, you can either transcode on-the-fly to the ProRes codec of your choice or capture as HDV and subsequently transcode to ProRes codec of your choice.

Can a single Access Point support both bridge mode and Access Point mode at the same time

Hi Guys
Does anyone know which access point can work in both bridge mode and AP mode ?
Cheers

Well what are you trying to cover. If its really a large outdoor area, then look at the mesh AP. Those require a WLC. Autonomous or stand alone ap can perform bridging on one radio and client access on another. You can also look at AP that support indoor mesh that also controlled by a wlc. If your putting APs outdoors, then look at the outdoor mesh.
Thanks,
Scott Fella
Sent from my iPhone

POP capabilities are gotten in authorization mode, and not transaction mode

I am using Javamail in an email client that requires UIDL support for POP3 servers. There are some servers that return the UIDL capability only in transaction mode, not in authorization mode (eg. pop.aol.com). I am unable to connect to such servers once I upgraded to javamail 1.4.4, since it is now looking at the capabilities before executing the UIDL command. However, it gets the capabilities in authorization mode, and servers like the one above do not send the UIDL capability in this mode. If the capabilities were refreshed in transaction mode (once login was done), UIDL would be returned. This looks like a bug. Is there a workaround for this?

This definitely looks like a bug in AOL's server, please report it to them.
RFC 2449 says:
   A capability description MUST document in which states the capability
   is announced, and in which states the commands are valid.
   Capabilities available in the AUTHORIZATION state MUST be announced
   in both states.
   If a capability is announced in both states, but the argument might
   differ after authentication, this possibility MUST be stated in the
   capability description.
   (These requirements allow a client to issue only one CAPA command if
   it does not use any TRANSACTION-only capabilities, or any
   capabilities whose values may differ after authentication.)
6.8. UIDL capability
   CAPA tag:
       UIDL
   Announced states / possible differences:
       both / noThis says to me that the UIDL capability, if supported, must be announced in both states
and must not change between states.
You can set the session property mail.pop3.disablecapa to "true" to disable the use of the CAPA
command, which will cause it to assume UIDL is supported.

Frequent state between agressive mode and calming down mode

I have a cisco 1841 router, on which ip inspection is enabled (IPS). The inspect max-incomplete for high is 500 and for low is 400. This is a gateway to an ISP (for internet) with 512K bandwidth. I get frequent transitions between aggressive and calming down modes, which is causing connection interruption. It was working fine, but it is happening currently. Can anybody help me with this?

Hi, please review this doc for a discussion of IOS Firewall and IPS DoS protection configuration:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5708/ps5710/ps1018/prod_white_paper0900aecd804e5098.html

How to set input ready query to display mode and set edit mode in WAD?

when I create A input ready query but not set query propery start query in change mode ,but I want to set this query in input ready mode ,how to set this in WAD?
hope anyone can help me
regard by
wenlong

Hi,
      You can get all the info from this thread , try it out
       WAD - set data entry mode
       Hope it helps.
Regards,
Priya.

Print the report on page has width larger than height and not landscape mode

Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....

Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Different display page layout in Display Layout mode and in Preview mode

Similar Messages

Maybe you are looking for