Cfdocument - Save ColdFusion Report to RTF without save prompt

I am attempting to save a Coldfusion report directly to an RTF file. The following example creates a RTF file but with the SAVE PROMPT windows. Is there a way to by-pass the save prompt window and save directly to RTF file?
<cfdocument format="rtf">
SitePoint.com - Introduction to ColdFusion 7
<h1>PDF Generation</h1>
<hr />
This is an example of PDF generation using ColdFusion 7.
</cfdocument>
Thanks Alex

http://forums.ni.com/t5/LabVIEW/Save-Report-to-File-vi-does-not-work-when-built-into-executable/td-p...

Similar Messages

How to save to .doc or .rtf without loosing formatting

Hi, I have to submit academic assignments with either .doc or .rtf file extensions. However, in the University there is a protocol for headers and footers so that the assignment is anonymous and when quoting from reference documents we have to indent paragraphs. When writing this is pages and exporting to .doc or .rtf all of the formatting gets lost. If I submit these without the right formatting, I will get marked down. They will not accept .pdf, which works OK - how can I save in .doc or .rtf without loosing the formatting?

Hi Peter Breis, you have suggested soemthing that works which is the first line and left paragraph indents but this still does not work with tabs. The .rtf is not a solution becaue of the need for headers and footers (with pages numbers). In the .rtf file they just appear at the end of the text rather than a header and footer.
Anyway, in summary, thank you Peter, you have given me a solution that works which is to indent using first line and left paragraph indents and to export into a .doc document. The headers and footers export without a problem using this method. I will nominate all the extra marks that I will get from following the University's protocol to you!, Thanks!

How do I save CS4 documents in CS5 without save as dialog?

At my college, they have CS4 (master suite) and at home I've got CS5 (design premium). I can save files in CS5 as CS4 so they can be read at college (by Flash) but I have to do it via the "save as" every time I save. After a couple of times, it get rather irritating. Is it possible for me to save in the usual way (as if it was a CS5 document) without the save as dialog every time I save my work?

I know that. Basically, every time I save, I need to do the following:
If I save as usual I get the following pop-up (see image)
So I have to open the "Save As" Dialog, save the file, I get the do you want to save over previous query and I'm done. I know this doesn't sound like much but it gets a bit frustrating to have to do that every time I want to save. Why can't I just do the usual Ctrl+S as this format and be done with it? I save quite a lot so as not to risk losing changes if Flash crashes.

To save oracle Reports 6i in RTF format.

Hi to all....
I want t o save a report in RTF format in oracle 6i.Kindly help me to solve the issue.
Scernario.
After clicking the button(Ex payroll report button) in oracle forms 6i ,the Save Dialog box should be opened to save the report in RTF format.
The report previewer should not open. How to avoid the report previewer and call the save dialog box to save the report.
A timely help needed here....
With Regards
Sprity......

No problem,
Try 1 of 3 Solutions...
The First Solution :*
1.open ur form > drop the pll & Delete it's plx file> save and close the form and builder > sign-in >compile & Run
(pls. notice is the internal error exists while compiling or running the form) y/n ?
2. Then,open ur form > re-attach the library
3. do the Ctrl-Shft-k and Ctrl-T > save the form > Run it.
(pls. notice is the internal error exists while compiling or running the form) y/n ?If it still fails, close the Form Builder Try...
The Second Solution :*
1.open ur form > sign-in > open the d2kwutil library, Ctrl-Shft-K *the library*> save and close it.
2. drop the attached library from ur form module > reattach it > sign-in >Pls press Ctrl-Shft-K, Ctrl-T. with the fresh new compiled version of the pll libery...If it still fails, close the Form Builder then finally Try...
The Third Solution :*
1.debug ur form >u will got a message indicating a missing DLL, its name 'd2kwut32.dll'.
2. Attached this Dll from the following path : C:ORANT\BIN directory, then the problem will be successfully solved.If it dramatically fails the am sorry .. am out of suggestions :(
But u can try if the same problem exists for other forms then i recommend to re-install ur Developper < the worest choice i am afraid to do it ...!
Best Regards,
Abdetu...

Unable to save webi report in excel format

Hi All,
I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
Can someone please advise me on this??
Please hel as it is very urgent.

Hi All,
Trying to replicate WEBI Excel Download issue.
Operating system : Windows 7
Internet Explorer : IE8 Version 8.0.7600.16385CO.
Jre Version : 1.6_ greater than 1.8 version.
If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results.

Unable to save a report that includes a datasource of "Microsoft SQL azure" type

I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

CAN´T OPEN OR SAVE OUTPUT REPORT

We need to view an output, but we get error message "The file is damaged and cannot be repaired". We executed customized report, it finished without errors. But when we press button "View Output" then we get error "File is damaged and it can´t be repaired"
If we download the output from server we can see it, so we confirm that the issue is not the report. Then we can´t save the report too.
Do you know what can be happening?
Thanks in advanced,

Hi,
I believe you should be prompted to (Open/Save As/Cancel) when clicking on the 'View Output' button. Make sure you add the application URL to the trusted sites list from the browser, and set the profile options at the application/user level as per the following documents.
Note: 165473.1 - Viewing Reports In Applications Fails Due to File Type Not Set Correctly
Note: 184375.1 - How to Setup The Report Output to Different Viewer Types in Oracle Applications 11i
Regards,
Hussein

In oracle 2.5 version report builder how to add option to generate/save the report as pdf file?

I am working with reports of 2.5 version and i got a requirement for adding an option to save the report in pdf format. Can anybody please help me on this asap
Thanks & Regards

Are u sure about the report version.
Please do upgrade while even in oracle they almost stopped for new version -Developer suite

Save the report in PDF format on the server: is it possible?

Hi all,
Is it possible to save the report in PDF format on the server?
In other words, in a web application:
1) the user requests a report
2) the report produced in PDF format, is saved on the server, where is the Java Reporting Component
3) the report, in PDF format, is sent to the client's user
Thanks a lot

PrintOutputController.export, get the byte stream, save on server.
Sincerely,
Ted Ueda

How do I save a Report to file using Report Generation vi's?(not HTML)

Hi,
Sorry about re-stating the problem. I am using the Report Generation vi's to create a report. There is an option to save HTML reports to file, however I must use Standard Report because I need to print in Landscape mode. HTML reports will not print in Landscape. One of the requirements is to save the report to file on the hard disk. I have tried to use the standard Open File and Write File vi's. A file is created, but the report is not saved into the file. How do I connect a report so that it will be saved in the file? I already tried simply wiring the report refnum into the data input of the Write File vi.
I have attached an example of my code.
I am using V7.1 Full Version. I have V8 available if that is any help.
Any ideas?
Thanks,
Chris
Attachments:
ReportExample.vi ‏52 KB

I did find this KB: How to Save Standard Reports?
Attached is an example of how to do this. You will have to relink the subVI's or else you will have a broken arrow. One is in LV7 and the other is in LV8
Message Edited by Sam R on 12-15-2005 02:25 PM
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
Standard_to_HTML_LV70.zip ‏23 KB
Standard_to_HTML_LV80.zip ‏29 KB

How to save classical report as pdf file

hi all,
i have created a classical report and now the requirement is to save that report as a pdf .
is there any FM or any other method to do so?
regards
vijay

Hi Vijay,
Here is what I did for the same requirement:
Calling for the PDF File name and path to save the file
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title         = 'Quote Bom PDF File'
      default_file_name    = l_file_name
      initial_directory    = l_fullpath
      prompt_on_overwrite = 'X'
    CHANGING
      filename             = l_file
      path                 = l_path
      fullpath             = g_path
      user_action          = l_user
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF l_user = 0.
Please follow the following order for the subroutines which is creating the Spool Number, writing the*
statements on to the screen and then create the PDF file*
    PERFORM get_spool_created.
    PERFORM write_lines.
    NEW-PAGE PRINT OFF.
    g_spool_no = sy-spono.
    PERFORM download_as_pdf.
Spool Number is getting created in this routine*
FORM get_spool_created .
DATA: pripar TYPE pri_params,
          arcpar TYPE arc_params,
          lay    TYPE pri_params-paart,
          lines TYPE pri_params-linct,
          rows   TYPE pri_params-linsz.
DATA: val(1), val1(1).
DATA: dest TYPE pri_params-pdest VALUE 'LP01'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination              = dest
      no_dialog                = 'X'
      immediately              = ' '
    IMPORTING
      out_archive_parameters   = arcpar
      out_parameters           = pripar
      valid                    = val
      valid_for_spool_creation = val1
    EXCEPTIONS
      archive_info_not_found   = 1
      invalid_print_params     = 2
      invalid_archive_params   = 3
      OTHERS                   = 4.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
pripar-linsz = '132'.
pripar-paart = 'X_65_132'.
pripar-prdsn = 'LP01'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      in_archive_parameters    = arcpar
      in_parameters            = pripar
      no_dialog                = 'X'
      list_name                = name
    IMPORTING
      out_archive_parameters   = arcpar
      out_parameters           = pripar
      valid                    = val
      valid_for_spool_creation = val1
    EXCEPTIONS
      archive_info_not_found   = 1
      invalid_print_params     = 2
      invalid_archive_params   = 3
      OTHERS                   = 4.
IF sy-subrc EQ 0.
    NEW-PAGE NO-TITLE NO-HEADING PRINT ON
    NEW-SECTION
    PARAMETERS pripar
    ARCHIVE PARAMETERS arcpar
    NO DIALOG.
ELSE.
    WRITE:/ 'Unable to create spool'.
    EXIT.
ENDIF.
ENDFORM.                    " GET_SPOOL_CREATED
Write all your statements in this routine*
*&      Form WRITE_LINES
      text
--> p1        text
<-- p2        text
FORM write_lines .
CALL THE ROUTINE WHICH WRITES ALL LINES TO THE SCREEN
ENDFORM.                    " WRITE_LINES
*Download the file as PDF
*&      Form DOWNLOAD_AS_PDF
      text
--> p1        text
<-- p2        text
FORM download_as_pdf .
DATA:
          l_no_of_bytes TYPE i,
          l_pdf_spoolid LIKE tsp01-rqident,
          l_jobname     LIKE tbtcjob-jobname,
          l_jobcount    LIKE tbtcjob-jobcount,
          i_pdf         TYPE TABLE OF tline,
          i_cpdf        TYPE TABLE OF tline,
          l_spono       TYPE tsp01_sp0r-rqid_char,
          l_fullpath    TYPE string.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = g_spool_no
      no_dialog                = ' '
    IMPORTING
      pdf_bytecount            = l_no_of_bytes
      pdf_spoolid              = l_pdf_spoolid
      btc_jobname              = l_jobname
      btc_jobcount             = l_jobcount
    TABLES
      pdf                      = i_pdf
    EXCEPTIONS
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
l_spono = g_spool_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
    EXPORTING
      spoolid = l_spono.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize            = l_no_of_bytes
      filename                = g_path
      filetype                = 'BIN'
    TABLES
      data_tab                = i_pdf
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6.
ENDFORM.                    " DOWNLOAD_AS_PDF
Thanks.
Respond if you need any more help.

Save SSRS Report as pdf using Reporting Services

I've been trying to convert a SSRS Report to PDF and save to
my local drive using the Reporting Web Services. Though I'm able to
generate the corresponding pdf file but the contents of the file are
missing. I've checked that the report I'm trying to convert is not an
empty one. Only the header section is present there within the generated
pdf files. Below is the code I'm using:
protected void GeneratePDFFromReport(object sender, EventArgs e)
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = new System.Net.NetworkCredential("username", "password", "domain");
rsExec.Credentials = new System.Net.NetworkCredential("username", "password", "domain");
//rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://servername/reportserver/reportservice2005.asmx";
rsExec.Url = "http://servername/reportserver/reportexecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "PDF";
Byte[] results;
string encoding = String.Empty;
string mimeType = "application/pdf";
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
// Path of the Report - XLS, PDF etc.
string fileName = @"C:\Report\MemberReport.pdf";
// Name of the report - Please note this is not the RDL file.
string _reportName = @"/ReportFolder/ReportName";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
try
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
results = rsExec.Render(format, deviceInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
Guid siteID = SPContext.Current.Site.ID;
GuidwebID = SPContext.Current.Site.OpenWeb().ID;
stringbudgetName = string.Empty;
try
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSitesite = newSPSite(siteID))
using(SPWebweb = site.OpenWeb(webID))
web.AllowUnsafeUpdates = true;
web.Files.Add(web.Url + "/Shared Documents/SharepointMemberExpenseReport_" + DateTime.Now.ToShortDateString().Replace('/','-') + ".pdf", results, true);
web.AllowUnsafeUpdates = false;
catch{ }
try
FileStream stream = File.Create(fileName, results.Length);
stream.Write(results, 0, results.Length);
stream.Close();
catch { }
results = null;
catch (Exception ex)
throw ex;
Any help would highly be appreciated. Thanks.

use this code, save the byte array into format of pdf
public static byte[] ExportReportInPDF(ReportViewer ReportViewerCompetency)
Warning[] warnings;
string[] streamids;
string mimeType;
string encoding;
string filenameExtension;
byte[] bytes;
if (ReportViewerCompetency.ProcessingMode == ProcessingMode.Local)
bytes = ReportViewerCompetency.LocalReport.Render("PDF", null, out mimeType,
out encoding, out filenameExtension, out streamids, out warnings);
else
bytes = ReportViewerCompetency.ServerReport.Render("PDF", null, out mimeType,
out encoding, out filenameExtension, out streamids, out warnings);
return bytes;
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

How to auto save pdf report through forms 6i

we are using the forms-6i and database 9i. and report builder-6i
here our requirement is calling the rdf report at the time of saving the form. and rdf report has opened pdf . that should be save into client machine automatically with prescribed file name. report is opening successfully. but i don't know how to save automaticcaly. can anybody help me how to o this
thank you

FORM BUILDER VERSION
Forms [32 Bit] Version 6.0.8.11.3 (Production)
Oracle Toolkit Version 6.0.5.35.0 (Production)
PL/SQL Version 8.0.6.0.0 (Production)
Oracle Procedure Builder V6.0.8.11.0 Build #449 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.0.0 - Production
Oracle Virtual Graphics System Version 6.0.5.35.0 (Production)
Oracle Tools GUI Utilities Version 6.0.5.35.0 (Production)
Oracle Multimedia Version 6.0.5.34.0 (Production)
Oracle Tools Integration Version 6.0.8.10.2 (Production)
Oracle Tools Common Area Version 6.0.5.32.1
Oracle CORE Version 4.0.6.0.0 - Production
Report Builder Version
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
Data Base: Oracle 9i
And we are developing the report by using above mentioned report builder and saved as a .rdf file. from the form. and calling that report from the form runtime by passing the parameters. i mentioned already report is opening fine and accurately. we want to that after opening the report that will be like a save as in pdf format of client_machine at specified location. there is no need to save the user manually and to avoid the user from these steps like to go report window file menu save as . can you pls suggest me how to do
sample coding for report calling
RUN_REPORT_OBJECT_PROC(FIND_REPORT_OBJECT('R_CRITICAL_xseries_multiple'),:Global.report_server,
'PDF',CACHE,:Global.path||'R_CRITICAL_xseries_multiple.rdf','paramform=No',:Global.reportserver_path,rep);

Unable to save a report in Unified Intelligence Center

Hello,
When I generate any report it displays fine but when I tried saving it using IE9.0 64 or 256 bit it tries to save the report but the status stays as "Saving New Report Agent detail report" until I close the browser. I'm able to save the report using the Firefox browser. Please let me know if there are any browser settings I need to modify.

Hi,
As per the BOM, below are the qualified browsers
Qualified Browsers
• Microsoft Internet Explorer version 7.0
• Microsoft Internet Explorer version 8.0
• Mozilla Firefox version 3.x
Not sure, you can try adjusting some compatability settings in IE9.
Regards,
Senthil

Unable to save a report created with CR

Hi Experts !
I've created a report using CR for SAP BO. When I try to save it on SAP, I receive the following error message: "RPC server not available. (Exception HResult:0x800706BA)".
What does this means and what can I do to save my report in SAP BO ?
Thanks for your help

Hi,
What is your B1 version/PL, your OS version/bits?
Thanks,
Gordon

Cfdocument - Save ColdFusion Report to RTF without save prompt

Similar Messages

Maybe you are looking for