Unable to save a report that includes a datasource of "Microsoft SQL azure" type
I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?
Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
UNABLE TO SAVE PORTAL REPORTS OUTPUT TO DISK WHEN USING INTERNET EXPLORER
Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
TimTim,
Are you trying to save the HTML output ? You might encounter probs. with that, but that is more due to IE security
settings than the Portal.
You might want to check your IE security settings.
Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
Tim -
Unable to save webi report in excel format
Hi All,
I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
Can someone please advise me on this??
Please hel as it is very urgent.Hi All,
Trying to replicate WEBI Excel Download issue.
Operating system : Windows 7
Internet Explorer : IE8 Version 8.0.7600.16385CO.
Jre Version : 1.6_ greater than 1.8 version.
If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results. -
This relates to the following thread:
Why does refreshing a report in the EPM Add-In need to edit the Ownership Manager?
Since I've received no responses on the above thread, I thought I might approach this from a different angle.
If we have a report that includes both Scope and Entity, in SAP BPC 10 NW (801 SP03) / EPM Add-In 10.0 SP 16 Patch 1, does this require a user to have elevated permissions in order to refresh the report? I ask because I have users who have rights to view reports, but they error out when they try to refresh a report's data, only where Scope and Entity are used in the report. The tasks that error are:
P0081
Run Consolidation Tasks
P0082
View Ownership Manager
P0083
Edit Ownership Manager
I do not understand why any of these should even be called by refreshing the report, as the user is simply "viewing" data that already exists in the environment.
Can someone please shed some light on this or point me in the direction of how I can go about resolving this issue?
Your help is greatly appreciated.
JeffHi
I am facing the same issue despiste the elevated app permission as per
https://msdn.microsoft.com/en-us/library/office/jj822159.aspx?f=255&MSPPError=-2147217396
I still had the error 401
the solution for me was
Under list settings -> advanced settings update the Create and Edit access settings from "Create and edit all items"
the add the user the right to add only ( no edit , no delete) .
Eric Caron -
With the new update I am unable to save my work that I have done when using the CS6 software, this is a real problem as I need to be able to save any changes I do. I also can't search files on my USB when I go to file-open while in Photoshop, Illustrator or Indesign. Please help as this is a real issue and has only been happening since the new Maverick update.
Thanks, Julia.nirdgirl wrote:
Being that Adobe stopped supporting CS6 a while ago, that is likely not going to happen. They're trying to force everyone to use CC, which I heard is having troubles since Marvericks as well. At least they will get a free Adobe update.
This is incorrect information. Adobe has issued updates for several CS6 products since CC came out, consistent with their official statements that they will continue to support CS6, which they still sell new (though the links are hard to find on their store).
Photoshop released a 13.0.6 update for CS6 on Nov. 7, it would be a good idea to make sure you have gotten the latest version even though a save problem is not mentioned in the release notes. Maybe it'll help anyway. -
Report that includes Item Details?
Hello:Is there a report that includes item details?In the previous PPal interface there was an option to "Include Shopping Cart details" in the history download section, but that is no longer present.Thanks.
The old download history page is still available. But the interfaces are different for different account types and getting to the link/page is difficult than earlier. These are the ways I have figured out so far.Merchant Account - Transaction -> Activity -> Download Link on the right hand side.Consumer Account - Activity -> Click on Statements DropDown on right hand side -> Activity Export. Irrespective of the account type, direct link https://history.paypal.com/us/cgi-bin/webscr?cmd=_history-download works fine and I have bookmarked and using the same.
-
Can UCCX 10 / CUIC Provide Historical Reports That Include Email Content?
Hi,
Can UCCX 10 / CUIC provide historical reports that include email content?
Currently I can only see email subject within historical reports, but on supervisor real time you can see email content.
Our customer wants to be able to report historically on email content, as its used for reviews etc.
Thanks in advance.
Mike.Hi
Having looked at the DB schema I see that only the to/from/subject fields are logged in the database. That's all the would be available to CUIC.
(http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_5/reference/guide/dbschema.pdf?mdfid=286265496)
That's not to say it's completely impossible - but it would be very complicated. You'd need to somehow extrac the content of the emails on the Exchange server into a database where it could be read in to CUIC. That could be very difficult, take up lots of space...
Aaron -
Unable to create a rule that includes "dimming" setting for lights
Just a quick head's up to the team who is monitoring the forums to correct issues with the new portal: I was unsuccessful with creating a new rule to turn on a light to a specific dimming setting. For example: "I want to create a rule for Living Room Light to turn on at 50% when Front Door is open." I am able to move the slider bar to select a 50% dimmer setting, but the rule still turns the light on to 100%. Going in to edit the rule, it appears that it saved a 100% dimmer setting. I've tried creating the rule on two different Windows 7 machines, using both Internet Explorer 11 and Chrome. I reverted to the original version of the portal, and creating the dimming rule worked fine. Thanks!
Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Unable to connect to report server - on Win 8.1 and SQL Server 2014
unable to connect to report server on Win 8.1 and SQL Server 2014 version
Microsoft SQL Server 2014 - 12.0.2000.8 (Intel X86)
Feb 20 2014 19:20:46
Copyright (c) Microsoft Corporation
Express Edition on Windows NT 6.3 <X64> (Build 9600: ) (WOW64)
ThanksHi,
I suggest you check out the following article for the steps of installing
Database Engine Services and SQL Server Reporting Service.
http://msdn.microsoft.com/en-us/library/ms143711.aspx
Best Regards,
Tracy
Tracy Cai
TechNet Community Support -
I had Itunes on my PC (Windows Vista, 64-bit) and it worked fine with my Ipod. I purchased an Ipod nano, and it was not recognized by Itunes and I was instructed to un-install and re-install. After un-installing Itunes, I am unable to reinstall. I receive the following error message: microsoft.VC80.CRT.type="win32".version="8.050727.6195".publickeytoken="1fc8b3b 9a1e18e3b".processorarchitecture="x86". HRESULT: 0x80070424.
I am also having trouble with Windows Updates, and receive the same error message: 80070424. Perhaps the 2 issues are related?
If anyone is able to help resolve the issue so I can successfully install Itunes, I would greatly appreciate it!I ran the sfc /scannow command, and yes the response was: Windows Resource Protection could not start with the repair service.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
Unable to Save - Crystal Reports 9
Post Author: RDel
CA Forum: General
I am experiencing an issue where I am unable to save a new file in Crystal Reports 9. If I click File - Save or File - Save As nothing happens, I am never prompted for a location to save the file. If I close, I am prompted to save (Yes or No), if I click Yes nothing happens.
Anyone ever experienced this issue before?
Thanks in advance for any assistance you can provide.Hi,
I would suggest you to manually register u201CFiledialog.dllu201D as follows:
1. Click 'Start' then 'Run'.
2. Type the following with quotes as shown:
regsvr32 "C:\Program Files\Common Files\Business Objects\3.0\bin\filedialog.dll"
The following confirmation appears: "DLLRegisterServer in C:\Program Files\Common Files\ Business Objects\3.0\bin\filedialog.dll succeeded".
Note :Path of filedialog.dll will be not exactly same because it depends on the versions.
Hope that helps!!
Regards,
Shweta -
My old computer crashed and I was unable to save the music files that I had imported using CDs but I have the music on my IPOD touch. How can I transfer the music from my IPOD without haveing to import the CDs again? My purchases have been transferred with no problem. Thank you
Try the shareware Phone to PC.
-
Unable to save PDF's that have editable fields
I am unable to save forms that have editable fields. I get the error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk"
I am running windows xp, and started with reader 10.1.4 having this issue, now i upgraded to 11 and same results. My co workers can save the same form and i have over 80 gb of free space on my hard drive which is where i am saving it to. I have tried saving it to other locations on my hard drive but get the same message. I can however save pdf files that have no fillable forms in them just fine.
I could really use some help.
ThanksFigured out prtected mode was set to enabled on startup. Turned that off and no more problems.
-
Unable to Save Crystal Reports(With Dynamic Parameters to Infoview)
I am using Crystal Reports 2008 and BOXI 3.1. I have 5 dynamic parameters and can't save my report to Infoview, but If I use Static parameter then I am able to save it.
Any help would be highly interested?
thanks
nisnikiWhat is the exact error message and the version of crystal reports.Can you also check that all the BOE services are up and running
-
Unable to save a report in Unified Intelligence Center
Hello,
When I generate any report it displays fine but when I tried saving it using IE9.0 64 or 256 bit it tries to save the report but the status stays as "Saving New Report Agent detail report" until I close the browser. I'm able to save the report using the Firefox browser. Please let me know if there are any browser settings I need to modify.Hi,
As per the BOM, below are the qualified browsers
Qualified Browsers
• Microsoft Internet Explorer version 7.0
• Microsoft Internet Explorer version 8.0
• Mozilla Firefox version 3.x
Not sure, you can try adjusting some compatability settings in IE9.
Regards,
Senthil
Maybe you are looking for
-
I have an Iphone 5 and downloaded the new ios7 and now my phone is locked. It says I need to enter a passcode. but I never had a passcode, and I can not get into my phone. Please help me...
-
Keyboard shortcut for Sub Menu item Only works AFTER using it
I have a Custom MOVE TO READ Mailbox shortcut. This is a SUB Menu item.. MESSAGE/Move To/READ FOLDER. It is really sweet to clear out my INBOX and save emails. So, what is ODD is that that menu has to be Clicked on and shown each time MAIL is run for
-
How can I get an Image's resolution?
how can i get the resolution of images been read into my paint application?
-
I hope you'all experienced users can help. I come from a background of having worked for a County Govt. where we as the IT staff had Blackberrys. I am guessing they had a BES. I got used to that function! Now, I just bought an 8830 through Verizon, a
-
Adobe photoshop/premiere elements 10 and windows 8
Is adobe photoshop elements 10 and adobe premiere elements 10 compatible with windows 8?