CFFORMGROUP and child alignment issues

Hi All,
I have several issues that i am trying to resolve.
The most important one right now is the alignment of
checkboxs in a cfformgroup type="hbox" tag.
for stupid reason it aligns them vertically not horizontal.
WTF?
i have set the size of the hbox to be plenty wide enough to
accomidate the children. i have also set several style propertys
but none of them make a difference its like they are ignored.
Below is my code, can someone please tell me what i am doing
wrong?
Thanks in advance.
Tim
<cfsavecontent variable="daysStyle">
marginLeft: 0;
horizontalAlign: 'left';
horizontalGap: 1;
</cfsavecontent>
<cfformgroup type="hbox" style="#daysStyle#" visible="yes"
enabled="yes" width="550">
<cfinput type="checkbox" name="day1" value="1" label="M"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day2" value="2" label="T"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day3" value="3" label="W"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day4" value="4" label="T"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day5" value="5" label="F"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day6" value="6" label="S"
labelPlacement="top" checked="yes">
<cfinput type="checkbox" name="day7" value="7" label="S"
labelPlacement="top" checked="yes">
</cfformgroup>

well its a good thing i did not wait on a reply :)
Here is how i fixed the issue:
The answer is use a TILE group type around the outside.
<cfformgroup type="tile" style="#daysStyle#" >
<cfformgroup type="vbox">
<cfinput type="checkbox" name="day1" value="1" label="M"
labelPlacement="top" checked="yes" width="12" >
<cfinput type="text" width="30" name="hours1"
value="0">
</cfformgroup>
<cfformgroup type="vbox">
<cfinput type="checkbox" name="day2" value="2" label="T"
labelPlacement="top" checked="yes" width="12" >
<cfinput type="text" width="30" name="hours2"
value="0">
</cfformgroup>
</cfformgroup>
hope that hels someone
tim

Similar Messages

Score Editor: Force Syncopation and Note Alignment issue

Two issues here:
1 - Is it possible to get the A in the Left Hand to align with the Right Hand Chord on the second half of Beat 3?.... Dont understand why the problem is here and it looks dreadful to read
2 - Upper Example is with Force Syncopation ( ie following Ski's past rule that he leaves Syncopation Unchecked in the inspector and Forces Sync on individual note groups).
Lower Example is without Force Syncopation.
In both examples I cannot get what I would like it to display which is dotted quarter notes in the Right Hand Chord tied across the imaginary middle of the bar line to the notes on Beat 3
All suggestions welcome
best
M S

Just to say - the Layout Tool cured it.. just moved the A bass note along to the right till it lined up with the chord above.. (credit to iS in 'another place')
Still havent found a way to split the first chord in the right hand over an invisible barline in the middle.
ie with the first note a dotted quarter note tied to the 3rd beat..
Can Logic do this?
Message was edited by: musicspirit

APEX 4.2 aligning issue of Stop and Start Grid Layout item

My APEX application application is in the process of moving from 4.0 to 4.2. I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them. Earlier I had an issue with the border itself not showing up in the 4.2 application. I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line. I have tried a number of different things but none of them have worked. This seems like a very simple issue to fix but I am having a tough time resolving it.
I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item. It seems that the above CSS code does not work on the new grid. I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
Any suggestions?
Thanks
Ajay K

I deleted and added back the Stop and Start Grid Layout items not aligning properly. This worked. Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly. Deleting and adding them back resolved the issue.

Session expiration issue with parent and child window

Hi,
We have two applications (App1 - Implemented using JSF, Spring and Hibernate and App2 -Implemented using Spring MVC, Spring JDBC).
I have implemented 'Test Access Content' functionality in App1.
First admin user (Role- Manager) needs to login to App1
As part of 'Test Access Content' functionality, he enters URL with encrypted key and click 'Test Access' button.
It opens new window (implemented using java script - window.open) and hits spring controller of App2.
In spring controller of App2, I am decrypting the key to get user details. After that i am setting user details in session, constructing final URL to display actual content.
Problem is parent window maintains session till child window renders response. Once child window renders response, parent window loosing session.
So, if i click any button in parent window after child window renders response, it displays login page as there is no session for parent window.
Please note that App1 and App2 are sharing same domain. only context paths are different for both apps (app1 and app2).
Any suggestions on this issue are much appreciated. Please let us know if you have any questions.

Hi,
When you open a child window from parent window then you can access child data in the parent window through javascript.
We have a main web page. There are quite many links on it from which >user can open new web pages but the data is saved when the submit >button on the main page is clicked. Also data that user entered on the >other sub pages is not displayed in the main window.
1 is this a case of parent and child window.case 1 When you are submitting the main page you need to run javascript function and get data from child windows and save that to database or session. next time when you are displaying the main window you need to query session or database to display the child window data in the main window.
Case 2> closing child window and you need data in the parent. This can be done in two ways.
1> When you are closing the child window populate some variables of the main window using javasript.
2> Save the values in the database or session and refresh the main window and extract data from database or session
Where should the data be saved that user enetered on the sub pages as the data is not shown in the main page - should it be stored in the session?It is design decision. You can store data in either session or database when you are closing the child window. But ifyou are saving the data on the main page then you can populate main page with child windows data using javascript. Save the data t database when main window data is saved. Depends on business requirements.
In short if you are saving child windows data in session or database then you need to refresh main screen to pull that data otherwise populate main screen using javascript.
I hope i answered your questions :) best of luck

Alignment Issues between dreamweaver and browser

Hi
Hoping someone can help, i'm trying to learn how to make
better sites with advanced tools like apDIV's but seem to be
running into an alignment issue. When I make the html file in
dreamweaver I seem to have to off set the images and div tags
inorder for the site to show up aligned properly in firefox,
explorer, etc. I'm thinking there might be a problem in the actual
code causing this but am not good enough yet to find it or the
problem, any ideas or guidence would be greatly accepted. below if
the links work is the difference I see between dreamweaver and when
its launched in a browser.
DreamweaverScreen
BrowserScreen

> over a centered frame
You are not using frames - that's a table.
Yes - there's a way to do this, but it will involve your
working in code.
Make your page left aligned by removing any centering.
Then position your layer so that it is properly located over
the table.
Change this -
</head>
to this -
<style type="text/css">
#wrapper { width:760px; margin:0 auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
</style>
</head>
(you may need to adjust this width so that it's consistent
with the width of
your centering table)
change this -
<body ...>
(the ellipsis represents any other attributes that might be
mentioned in the
body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -

</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vinx21" <[email protected]> wrote in
message
news:ge9t3e$92s$[email protected]..
> thanks for the help osgood, I see now what my problem is
and am just
> wondered
> if there was a way to place the absolute layer over top,
in the right
> position,
or will have i have to remake one of the elements a
> different way???
>
> thanks again, dave
>

Check for same parent and child combination

hi all i am using oracle 10g. can you please help me in this issue.
how do i know if the same combination of parent and child present in the table
key value and value are the values given by user.
if the user try to create a same profile with same set of key_value and value then that should be avoided
so how to achieve that.
example profile already in the table
-- PROFILE_ID,DETAIL_ID,PARENT_DETAIL_ID,KEY_VALUE, VALUE, LAST_IND
100,               1,               NULL,                      1,              CDE,     N
100,               2,              1,                            2,              XXX,     N
100,               3,              1,                            2,              YYY,    N
100,               4,              1,                            4,              NEW,    Ynew profile by user -- it should throw an error saying that same profile already present
-- PROFILE_ID,DETAIL_ID,PARENT_DETAIL_ID,KEY_VALUE,VALUE,LAST_IND
101,               5,               NULL,                      1,              CDE,    N
101,               6,              5,                            2,              XXX,    N
101,               7,              5,                            2,              YYY,    N
101,               8,              5,                            4,              NEW,    YEdited by: DeepakDevarapalli on Dec 9, 2009 9:48 AM
Edited by: DeepakDevarapalli on Dec 9, 2009 9:59 AM

sir i have used your logic, each query works fine and displays the correct results below are the results.
SELECT   SUBSTR (t.ptxt, 2, LENGTH (ptxt)) profile_values
    FROM (SELECT     SYS_CONNECT_BY_PATH (rtxt, ',') AS ptxt
                FROM (SELECT key_value || '/' || VALUE AS rtxt,
                             ROW_NUMBER () OVER (PARTITION BY profile_id ORDER BY key_value,
                              VALUE) AS rnum
                        FROM sp_profile_detail
                       WHERE profile_id IN (100, 101))
               WHERE CONNECT_BY_ISLEAF = 1
          START WITH rnum = 1
          CONNECT BY rnum = PRIOR rnum + 1) t
GROUP BY ptxtresults from query 1
profile_values
1/CDE,2/XXX,2/YYY,4/111
1/CDE,2/XXX,2/YYY,4/222
SELECT   SUBSTR (s.ptxt, 2, LENGTH (ptxt)) profile_values
    FROM (SELECT     SYS_CONNECT_BY_PATH (rtxt, ',') AS ptxt
                FROM (SELECT key_value || '/' || VALUE AS rtxt,
                             ROW_NUMBER () OVER (ORDER BY key_value,
                              VALUE) AS rnum
                        FROM sp_profile_detail1)
               WHERE CONNECT_BY_ISLEAF = 1
          START WITH rnum = 1
          CONNECT BY rnum = PRIOR rnum + 1) s
GROUP BY ptxtresults from query 2
profile_values
1/CDE,2/XXX,2/YYY,4/111
but when i tried to combine both and do a minus it throws me an error .
ORA-00600: internal error code, arguments: [expcmo_strdef1], [27], [27], [], [], [], [], []
-- target
SELECT   SUBSTR (t.ptxt, 2, LENGTH (ptxt)) profile_values
    FROM (SELECT     SYS_CONNECT_BY_PATH (rtxt, ',') AS ptxt
                FROM (SELECT key_value || '/' || VALUE AS rtxt,
                             ROW_NUMBER () OVER (PARTITION BY profile_id ORDER BY key_value,
                              VALUE) AS rnum
                        FROM sp_profile_detail
                       WHERE profile_id IN (100, 101))
               WHERE CONNECT_BY_ISLEAF = 1
          START WITH rnum = 1
          CONNECT BY rnum = PRIOR rnum + 1) t
GROUP BY ptxt
MINUS
-- staging
SELECT   SUBSTR (s.ptxt, 2, LENGTH (ptxt)) profile_values
    FROM (SELECT     SYS_CONNECT_BY_PATH (rtxt, ',') AS ptxt
                FROM (SELECT key_value || '/' || VALUE AS rtxt,
                             ROW_NUMBER () OVER (ORDER BY key_value,
                              VALUE) AS rnum
                        FROM sp_profile_detail1)
               WHERE CONNECT_BY_ISLEAF = 1
          START WITH rnum = 1
          CONNECT BY rnum = PRIOR rnum + 1) s
GROUP BY ptxt

Problem with Master and Child table

Hi,
Working in jdev 11.1.1.2.0. I have one strange issue. i have master and child tables, the model is working fine with the view link. but when drag drop the same into my jsff. when i query the result 1st time 2 tables are refershing properly and data is coming. but the when i trying to select another row in the 1st table my 2nd table(child table) is not refreshing.
i put partial trigger of the 2nd table as 1st table id.
can any one help wht is issue here.
Edited by: user5802014 on Jul 15, 2010 3:44 PM

Check this post might help you
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html

Delivery document how to print the BOM Parent and Child items

Hi,
I have a production BOM. In Delivery document how to print the Parent and Child items Item Code and Qty.At the time
of add a delivery document Inventory stock redused only in Parent Item not child item because child item stock already reduced in issue for production.

If you need to print both the BOM Parent and Child items, you have to create your own report. BOM is only for production if it is not Sales type.
Thanks,
Gordon

OBIEE 11g Calendar alignment issue

Facts: OBIEE 11g - 11.1.5 on Windows 2003 server.
There's an alignment issue going on with OBIEE calendar, wich happens only when the month is october. For all other months, the calendar is displayed properly. It does not depend on the year. You may change the year and select October, you'll get the error.
You might see what happens on the link below.
http://img210.imageshack.us/img210/7876/firefoxds.jpg
This behavior may occur when using IE9 (both using compatibility mode or not), Mozila Firefox and Google Chrome.
I've looked over Metalink and the forums and could not find any information about this error.
Any tips?!
Thanks!
Marcos
Edited by: BI_Creation on Dec 1, 2011 11:37 AM
Edited by: BI_Creation on Dec 1, 2011 11:40 AM

Hi there. Does anybody noticed this issue on calendars?! That only occurs when the month is october....
Just updating, the correct version of OBIEE is 11.1.1.5.0.
Thanks in advance.
Marcos

Update column data to Upper Case in parent and child table

Hi ,
I am facing issue while updating column value to upper case in parent table and child table. How can i do that ?
when updating parent row:
ORA-02292: integrity constraint (XXXXXXXXXXXXXX_FK) violated - child record found
When updatng corresponding child row:
ORA-02291: integrity constraint (XXXXXXXXXXXXXXXX_FK) violated - parent key not found
how can i update on both the places ?
Regards,
AA

I am facing issue while updating column value to upper case in parent table and child table. How can i do that ?
Why do you need to do that?
That is just ONE of several questions you should answer before you start modifying your data.
1. What is your 4 digit Oracle version? (result of SELECT * FROM V$VERSION)
2. If both values are the same case what difference does it make what that case is?hen you don't need to alter your original data.
3. What is the source of the column values you are using now? If you change your data to upper case it will no longer be identical to the source data.
4. What is your plan for enforcing future values to be stored in UPPER case? Are you going to use a trigger? Have you written and tested such a trigger to see if it will even work the way you expect?
5. Why aren't you using a surrogate key instead of a 'business' data item? You have just demonstrated one reason why surrogate keys can be useful: their actual value is NOT important.
You should reexamine your problem and architecture and consider other alternatives.
One alternative is to add a new 'surrogate key' column to use as the primary key. Just create a new sequence and use a trigger to populate the new column. Your current plans will require a trigger to perform the case conversion so instead of the just use the trigger to provide the value.
If the change is being done to facilitate searching you could just add a VIRTUAL column UPPER_MY_COLUMN and index that instead. Then you could search on that new virtual column and the data values would still be identical to the original data source.

Insert data Flatfile table to Parent and child tables

Hi All,
I have Flatfile table which is we getting from daily txt files and i want to populate flatfile data to parent as well as child tables. parent table has primary key as ID. This ID is foreign key of child tables.
Here i have mentioned our process.
1. Flatfile duplicates has to remove with condition of daily date.
2. Before Insert parent table have to check duplicate(we have Unique key of 4 columns in parent) if duplicate is there we have to delete duplicate then Insert into parent table unique records(Primary key is ID).(here why we are delete duplicate record meaning
we getting daily files so if any records updated in future that record should be insert to parent and child table so only we delete old records and insert new records).
3.After insert parent we have to populate child tables from Flatfile table as well as we have to insert parent table primary key as foreign key of child tables.
4. if any truncation error occurs that errors should go to error log table.
Right now we are using cursor for this concept and cursor has performance issue. so we are trying to optimize other way to populate parent and child table to increase performance to populate.
Please help us to which way to do this process increase of performance .
Please can any one reply.

Hi RajVasu,
Since this issue is related to Transact-SQL, I will move this thread to Transact-SQL forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Master control attribute value discrepency between Master and child org.

Hi Guru,
We are facing a strange issue in Track install Base Attribute values. There are some 60K item having discrepency in the value of the this attribute between master and child.
We are wondering how it happens as this attribute is master controlled one and we never changed this attribute control and kept as Master controlled. The master value is true
If you guys experience this issue, please let us know the solution that you had applied to fix this issue.
regards
venkat

Try executing the vo1 query before setting the bind variable for vo2, then execute the vo2 query (if that's what you want to do).

More alignment issues

hi,
I'm hardly an expert - but I have made great strides because of helpful people who throw me a hint.
my site: www.kirarmerica.com
I still have JUST a FEW alignment issues. I like to have everything centered, so now I am just down to my spec sheets.
I know that they might not be configured ALL the same, but I am hoping I can change a few things
please look at Kira America | Products
click on any spec sheet and you will see that the headers menu and sometimes the footer stays centered, but the spec info jumps to the left of the page.
I've found the correct .css to edit. but I cant quite figure out how to align the columns vertically on the page.
for example if I put a margin on #right_column it put it in the right spot, but then the rest of the content jumps all over the page.
any hints would be helpful!

These changes will center content in white area
#container h1, #container h2, #container h3, #container h4, #container h5, #container h6 {
    border-bottom: 1px solid #DEDACB;
    padding-bottom: 8px;
    text-align: center;
.excel214 {
    border: medium none;
    color: #000000;
    font-family: Calibri,sans-serif;
    font-size: 11pt;
    font-style: normal;
    font-weight: 400;
margin-left: auto;
    margin-right: auto;
    padding-left: 1px;
    padding-right: 1px;
    padding-top: 1px;
    text-decoration: none;
    vertical-align: bottom;
    white-space: nowrap;

Parent and Child Both Variant in Subcontracting.

Dear MM Experts.
I have a scenario in subcontracting where both the material Parent and Child are having variant class.
At the time of PO creation I am able to configure the Parent Item from the characteristics but the child item is not showing me the parameters of Child when we explode the components.
Can anyone help me resolving the issues.
Yogesh Walde

yes you can
<mx:TitleWindow>
<mx:Script>
<![CDATA[
import mx.core.Application;
]]>
</mx:Script>
</mx:TitleWindow>

Loading date different in SBOM Header and Child Material.

Hi All,
We are implementing the SBOM Functionality for our Client. We are facing unusual issue while going through a Testing Phase. We are using the same SBOM Master data for all our testing purpose. I have created 4 Sales Orders for same SBOM Material. In some Sales Orders I am getting same Loading Date for SBOM Header and Chil Materail in Shipping Tab Page in Overview Screen. In some Sales Orders we are getting different Loading date for SBOM header and Child Item.. I have enclosed the details in the attached document with screen shot
I have check all configurations of Availabilty Check. Why the system is giving dates inspite of using same SBOM Master data in other Sales Order.
Please could you help in fixing this Issue where I need to make the changes. so I could get same dates for both. I am uable to attach the document in which I have given the screenshots.
Thanks
Farhan.

CFFORMGROUP and child alignment issues

Similar Messages

Maybe you are looking for