CFGFWK-64072 - One of the following needs to be selected

Installing OAM returns this error. Problem is, neither component exists to select and the installation will not proceed. The goal is to install components necessary to enable SSO with Forms/Reports 11g, and OAM is one of them.
CFGFWK-64072: One of the following needs to be selected:
Oracle WebCenter Composer Extension - 11.1.1.0 [Oracle_FRHome1]
Oracle WebCenter Composer Extension - 11.1.1.0 [Oracle_common]
Any help would be greatly appreciated.
Thanks

Found reference to similar issue being caused by Windows User Access Control (UAC) being enabled in User Comments, but can anyone confirm?
http://onlineappsdba.com/index.php/2010/08/17/part-v-create-domain-oracleidm-11g-step-by-step-installation-of-oam-oim-oaam-oapm-oin/

Similar Messages

  • Error: this type needs one of the following values('true','false')

    I'm trying to use <c:if> in a jsp (in Workshop 8.1), as in:
                   <c:if test="1 == 1">
              <!-- something here -->
              </c:if>
              But, I get the following message when I hover over the error indicator
              at the test:
              Error: this type needs one of the following values('true','false')
              It will actually work if I do:
                   <c:if test="true">
              <!-- something here -->
              </c:if>
              but, of course, that's useless.
              Am I missing something here?

    David Karr wrote:
              > The value of the "test" attribute needs to be an Expression Language expression. Try changing it to "${1 == 1}", and that should work.
              Actually, I had tried that, and it would have worked that way if I had
              the right taglib declaration -- I had accidentally left in the rt
              versions, so a <%= test %> type of expression worked.
              But, that's not the way I wanted to do it, so I put the non-rt versions
              in, along with tld and jar files that I had in some other directories,
              then it worked fine. In the process, when searching my hard drive for
              standard.jar, I noticed I had four or five different versions, each with
              a slightly different size. Of course, I had to tinker, and downloaded
              the zip from Apache, figuring it would be best to have a matched set of
              tlds and jars.
              And now I get an error that the matching class cannot be found:
              > ERROR: response.jsp:1: Package org.apache.taglibs.standard.tag.el.core contains no member type of this name.
              and
              > ERROR: response.jsp:14: The tag handler class was not found "org.apache.taglibs.standard.tag.el.core.IfTag".
              But, if I navigate the standard .jar that is in my WEB-INF/lib
              directory, lo and behold, there is the file IfTag.class in what appears
              to be the correct package.

  • How do I fix this error message, The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (connectag

    We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
    Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address."
    Help please

    This is for a special URL that starts with
    connectagent://
    instead of with
    http://
    is that right?
    Two thoughts:
    (1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    Find your Garmin plugin change "Ask to Activate" to "Always Activate".
    Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
    (2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons?

  • Firefox doesn't know how to open this address, because one of the following protocols (itms-service) isn't associated with any program or is not allowed in this

    Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address."
    tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
    trying to download an app related to a rewards gift card
    firefox and os versions are up to date on MacBook Air

    Hello!
    Would you please provide the link you were trying to visit?
    Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
    I hope we can help you solve your problem.

  • PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow

    Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
    Code:
    -- AUdit Code Begin
    -- Note: Ony for those tables having 'AUDIT' UDP
    -- Value set to 'T'
    IF (Select Count(*) From DBConfiguration
    Where ConfigurationCode = 'AUDIT' AND
    ConfigurationValue = 'T') > 0 THEN
    WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
    :old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
    :old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
    :old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
    :old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
    CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
    :old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
    :old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
    :old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
    CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
    :old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
    End;
    WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
    CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
    CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
    CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
    CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    End if;
    -- Audit End
    Error:
    95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
    ( - + case mod new not null others <an identifier>
    <a double-quoted delimited-identifier> <a bind variable> avg
    count current exists max min prior sql stddev sum variance
    execute forall merge time timestamp interval date
    <a string literal with character set specification>
    <a number> <a single-quoted SQL string> pipe
    <an alternatively-quoted string literal with character set specification>
    <an alternativ
    97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
    * & - + ; / at for mod remainder rem <an exponent (**)> and
    or group having intersect minus order start union where
    connect || multiset

    Here is the code:
    -- AUdit Code Begin
    -- Note: Ony for those tables having 'AUDIT' UDP
    -- Value set to 'T'
    IF (Select Count(DBConfigurationValue) From DBConfiguration
    Where DBConfigurationCode = 'AUDIT' AND
    DBConfigurationValue = 'T') > 0 THEN
    WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
    :old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
    :old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
    :old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
    :old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
    CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
    :old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
    :old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
    :old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
    End;
    WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
    CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
    :old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
    End;
    WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
    CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
    CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
    CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
    Begin
    Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
    VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
    CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
    End;
    End if;

  • PLS-00103: Encountered the symbol "" when expecting one of the following:

    Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
    <CFQUERY DATASOURCE="CRM">
    create or replace trigger AWC_ACCESSROLESID_TRI
    before insert on AWC_ACCESSROLES
    for each row
    begin
    select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
    end;
    </CFQUERY>
    But the created trigger is not compiled, it is giving the following error
    "Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
    If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
    Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
    Thanks in advance,
    Vinod

    So it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
    Cheers, APC

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

    When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
    * This site may be experiencing a problem
    * The site may not be a member of the Windows Live Network
    You can:
    * You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
    However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

    Hi
    I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
    I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
    On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
    All the time I am getting below error,
    coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
        at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
    ction(void)(TcpInitiator.cpp:307)
        at coherence::component::util::TcpInitiator::openConnection
        at coherence::component::util::Initiator::ensureConnection
        at coherence::component::net::extend::RemoteCacheService::openChannel
        at coherence::component::net::extend::RemoteService::doStart
        at coherence::component::net::extend::RemoteService::start
        at coherence::component::util::SafeService::startService
        at coherence::component::util::SafeService::restartService
        at coherence::component::util::SafeService::ensureRunningServiceInternal
        at coherence::component::util::SafeService::start
        at coherence::net::DefaultConfigurableCacheFactory::configureService
        at coherence::net::DefaultConfigurableCacheFactory::ensureService
        at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
        at coherence::net::DefaultConfigurableCacheFactory::configureCache
        at coherence::net::DefaultConfigurableCacheFactory::ensureCache
        at coherence::net::CacheFactory::getCache
        at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
        at _onexit
        at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
        at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
        at BaseThreadInitThunk
        at RtlInitializeExceptionChain
        at RtlInitializeExceptionChain
        on thread "main"
    Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
    RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
        at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
    etResponse(void)(AbstractPofRequest.cpp:203)
        at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
        at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
        at coherence::component::util::Initiator::openConnection
        at coherence::component::net::extend::PofConnection::open
        at coherence::component::util::TcpInitiator::openConnection
        at coherence::component::util::Initiator::ensureConnection
        at coherence::component::net::extend::RemoteCacheService::openChannel
        at coherence::component::net::extend::RemoteService::doStart
        at coherence::component::net::extend::RemoteService::start
        at coherence::component::util::SafeService::startService
        at coherence::component::util::SafeService::restartService
        at coherence::component::util::SafeService::ensureRunningServiceInternal
        at coherence::component::util::SafeService::start
        at coherence::net::DefaultConfigurableCacheFactory::configureService
        at coherence::net::DefaultConfigurableCacheFactory::ensureService
        at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
        at coherence::net::DefaultConfigurableCacheFactory::configureCache
        at coherence::net::DefaultConfigurableCacheFactory::ensureCache
        at coherence::net::CacheFactory::getCache
        at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
    ,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
    ,void,void,void> >::sizeOf(bool)
        at _onexit
        at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
        at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
        at BaseThreadInitThunk
        at RtlInitializeExceptionChain
        at RtlInitializeExceptionChain
        on thread "main"
    Caused by: coherence::io::IOException: socket disconnect
        at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
        at coherence::net::Socket::readInternal
        at coherence::net::Socket::SocketInput::read
        at coherence::io::BufferedInputStream::fillBuffer
        at coherence::io::BufferedInputStream::read
        at coherence::component::util::TcpInitiator::readMessageLength
        at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
        at coherence::component::util::Daemon::run
        at coherence::lang::Thread::run
        on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

    We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
    <ssl>
                  <protocol>Tls</protocol>
                  <local-certificates>
                    <certificate>
                      <url>c:\Cert\</url>
                      <password>password</password>
                      <flags>DefaultKeySet</flags>
                    </certificate>
                  </local-certificates>
                </ssl>
    thanks
    Bala

  • Discovery data couldn't be inserted to the database. This could have happened because of one of the following reasons:

    Discovery data couldn't be inserted to the database. This could have happened because  of one of the following reasons:
      - Discovery data is stale. The discovery data is generated by an MP recently deleted.
      - Database connectivity problems or database running out of space.
      - Discovery data received is not valid.
     The following details should help to further diagnose:
     DiscoveryId: ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2
     HealthServiceId: ab069276-c6dc-13d7-3ef5-28e780c34953
     Microsoft.EnterpriseManagement.Common.DiscoveryDataUnresolvedClassPropertyNameException,Unable to resolve the class property name specified in the discovery data item. Try using a fully qualified name.
    Class property name: 12f3e541-ec4d-7310-be57-fa3bde0bed06
    Rule ID: ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2
    Instance:
    <?xml version="1.0" encoding="utf-16"?><ClassInstance TypeId="{6ce7ab22-1880-0eb1-40ba-86d9a8c3d5f5}"><Settings><Setting><Name>0b3944af-12ff-1e1f-ac5c-55485fc10671</Name><Value>MANAGED
    REAL TIME APPLY</Value></Setting><Setting><Name>12f3e541-ec4d-7310-be57-fa3bde0bed06</Name><Value>rac2</Value></Setting><Setting><Name>18900065-cbab-1788-0c0e-2c97ef41d7d2</Name><Value>LGWR</Value></Setting><Setting><Name>1a42a2bc-9e87-029a-6db6-f512f8d00ca2</Name><Value></Value></Setting><Setting><Name>5c92d602-346f-9202-e2b4-7cfdc7226661</Name><Value>Common</Value></Setting><Setting><Name>5e763b8d-1979-d0e9-08bf-ea857c67fbaa</Name><Value></Value></Setting><Setting><Name>7dd3b6cb-8180-d58a-fae2-985730c3ffb8</Name><Value></Value></Setting><Setting><Name>7ecb288d-50c8-dd5b-419f-5d4712ef4b75</Name><Value>Database
    Physical</Value></Setting><Setting><Name>8c62b4e5-a737-b8d7-9017-4e8ea4c5a4ac</Name><Value></Value></Setting><Setting><Name>99cdac55-6b00-2485-cb26-bed62d37c926</Name><Value>Common</Value></Setting><Setting><Name>9ed7463c-fa1e-00ea-6743-5e54b928b7e8</Name><Value></Value></Setting><Setting><Name>a606d019-eff4-c6b9-eec9-32d43913fa58</Name><Value>DatabasePhysicalMP</Value></Setting><Setting><Name>aa9fbc8a-e274-91e8-7731-ba324682cab9</Name><Value>DatabasePhysical</Value></Setting><Setting><Name>afb4f9e6-bf48-1737-76ad-c9b3ec325b97</Name><Value>rac2</Value></Setting><Setting><Name>b60a9e0e-5baa-9b0a-8201-6ddd697d060d</Name><Value></Value></Setting><Setting><Name>bf194186-a061-ccf1-94de-971988a79003</Name><Value></Value></Setting><Setting><Name>c2ec02fc-fa4d-65c9-82da-fa76476433eb</Name><Value>rac2</Value></Setting><Setting><Name>d87b0cd0-2149-5736-ab85-42ebddab12a2</Name><Value></Value></Setting><Setting><Name>e1165cbd-8778-5bc1-de07-af341d420068</Name><Value>GRD</Value></Setting><Setting><Name>f56fc436-4a31-48dc-3127-745e5a6d2800</Name><Value></Value></Setting><Setting><Name>fda3d28f-3f34-e51c-e1ad-b1413a70c4ac</Name><Value>GUARD</Value></Setting></Settings></ClassInstance>.

    Try to reimport the MP. You should use the following sql to query the problematic MP
    select d.discoveryid, d.discoveryName,mp.mpfriendlyname from discovery d inner join managementpack mp on d.managementpackid=mp.managementpackid where d.discoveryid='ae39d630-f82d-77ee-d5d9-dd4c4a2e7bc2'
    Discovery data couldn't be inserted to the database: Event IDs: 33333 and 10801
    http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/5f826064-d3f5-43f0-a328-c2f3eb56e932
    Insert Discovery Data Fails
    http://social.technet.microsoft.com/Forums/en-US/operationsmanagerauthoring/thread/8b1387f0-ca4a-480b-a0f0-557d14c3fa89
    Event ID: 10801 in RMS server
    http://social.technet.microsoft.com/forums/en-us/operationsmanagergeneral/thread/5467A6A7-0B26-45C1-BF69-368E5A7AB841
    Roger

  • Error processing your request  Error We're sorry, we encountered an error processing your request.  Please try your request again. You may wish to try one of the following links:

    Cannot download trial version of Livecycle Designer:
    I select English windows then click download.  It then takes me to this page.
    Error We're sorry, we encountered an error processing your request.  Please try your request again. You may wish to try one of the following links:
    What gives?????

    I get this same error message when I try to download it, but I have purchased the full version and have a license key. I get this error screen when I try to download it from both Safari and Chrome on a Mac running OSX. A screenshot is attached.

  • I bought a full album but one of the songs needs authorization to play on a computer that is already authorized?

    I bought a full album but one of the songs needs authorization to play on a computer that is already authorized?

    Delete and redownload it if doing so is free in your country.
    (121606)

  • Rule Development - "one of the following"

    Hi there,
    I'm having trouble with my rule base. This should be a basic solution but I can;t think of it. I am writing about Food Claims, and I would like to say:
    1) Your food claim is permitted if it is one of the following.....(then list all the options within that if statement).
    2) Then,  If it is one of the following, does it meet the requirements?
    3) If it does not meet the requirements, then you cannot have that food claim on your package.
    However, when I am writing my rule base and test it, if the user selects a food claim and it ends up not meeting the requirements, it doesn't say you cant have that on the package, it just goes back to Question 1 and asks if your food claim is the next one on the list?
    How do I write my rules so that the user can only select one food claim and see if it meets the requirements? Rather then going through each food claim individually until all options have been investigated.

    Assuming your rules look something like this:
    [conclusion] Your food claim is permitted if
    [Level 1] any
    [Level 2] your food claim is (option 1) or
    [Level 2] your food claim is (option 2) or
    [Level 2] your food claim is (option 3)
    [Level 1] and
    [Level 1] your food claim meets the requirements
    [conclusion] Your food claim meets the requirements if
    [Level 1] your food claim meets requirement 1 and/or
    [Level 1] your food claim meets requirement 2 etc
    Or perhaps you have individual rules with the requirements for each option(?). Either way, if the options are mutually exclusive (only one per person) you might want to set them using a single text variable:
    [conclusion] your food claim is (option 1) if
    [Level 1] the food claim type = "option 1"
    [conclusion] your food claim is (option 2) if
    [Level 1] the food claim type = "option 2"
    That way the interview will collect the food claim type once and set all of your options from there so it won't ask it again. Does that help?
    Fiona

  • Disable Or Remove Extensions in Safari Open Safari. Click the Safari button, and then click Preferences. Under Preferences, click Extensions, and then do one of the following: To disable ALL extensions, click the toggle switch from ON to OFF. To disable a

    I FINALLY FOUND A WAY TO UNINSTALL "COUPON-DROP-DOWN" ANNOYING POP-UPS.
    Disable Or Remove Extensions in Safari
    Open Safari.
    Click the Safari button, and then click Preferences.
    Under Preferences, click Extensions, and then do one of the following:
    To disable ALL extensions, click the toggle switch from ON to OFF.
    To disable a single extension, click it, and then uncheck the Enable box.
    To remove a single extension, click it, and then click the Uninstall button.
    Click the X in the top right.

    Hello Wontsey & Welcome
    On 6-4-06 I installed Norton Internet Security 3.0.1 for Mac. I thought maybe my problem was related to the firewall part so I unistalled it and turned the Apple firewall that came with the computer back on.
    This did not help. In fact, when I try to open “Help” from the desktop menu the program opens and then immediately closes so I can’t access it.
    I hate to have to tell you this Norton is the problem, looking into uninstalling it, the uninstallers that came with it are not effective so no matter you do not have the CD/DVD go to their site to get the Uninstaller
    UseCocktail or OnyXto find the invisable files. Just follow Macjacks directive.
    This is covered in this Topic thread,abandoning Norton Internet Security see the files Macjack speaks of in the topic thread. If you have questions post in the same forum a new topic this thread is archive, click on the link and then click"back to topic list". This is why i first came to Apple discussions, to get help with the mess Norton can make on Panther and found help as you will. It is not a Safari issue per say, rather a Norton problem.
    Best of luck.
    Regards; )
    Eme~

  • IPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

    iPhoto: I was downloading photos from my iPhone every day during my holidays and suddenly one day: the following file could not be imported unrecognized format. And it's still same iPhone 4S and same format JPEG

    What version of iPhoto?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

Maybe you are looking for

  • That's great I can see my iCloud calendar in Outlook, but can't see my Outlook calendar in iCloud???

    That's great I can see my iCloud calendar in Outlook, but I can't see my Outlook calendar in iCloud. Any ideas on this one? I don't want to copy the calendar into iCloud, because they wouldn't be in sync. How do I view my Outlook calendar in iCloud s

  • Monitors Incompatibility List

    Somebody plz tell me if there is a list of incompatible monitors with the mac mini. I am going to buy a mac mini and simply wish to know if the monitor Samsung Syncmaster 773s will be compatible with it. Has anybody had any problems with this particu

  • Analize authority checks in web dynpro processing

    Hi, I'm facing strange things here. A user was reported not to be able to successfully use a function provided in our system: We provide a function for use of our call center agents that will reprocess and output document and send it by mail to the c

  • Mouse 'drift' in windows

    I am sure I am not alone in this but when pressing a click in windows bootcamp the mouse kind of drifts up wards, you have to be very very specific with it. Is there any adjustments that can be made to prevent this? I have windows XP

  • Scanning a sketch issues

    Hi friends , I wanted to scan a sketch using photoshop , so I went to File>Import>Wia Support , Photoshop recognizes my scanner Canon lide 110 , I choose Black and White 300 dpi and scan it . Now I got the sketch in bitmap format openned, the problem