Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
    at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
    at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
    at coherence::component::util::Initiator::openConnection
    at coherence::component::net::extend::PofConnection::open
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::io::IOException: socket disconnect
    at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
    at coherence::net::Socket::readInternal
    at coherence::net::Socket::SocketInput::read
    at coherence::io::BufferedInputStream::fillBuffer
    at coherence::io::BufferedInputStream::read
    at coherence::component::util::TcpInitiator::readMessageLength
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
    at coherence::component::util::Daemon::run
    at coherence::lang::Thread::run
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
              <protocol>Tls</protocol>
              <local-certificates>
                <certificate>
                  <url>c:\Cert\</url>
                  <password>password</password>
                  <flags>DefaultKeySet</flags>
                </certificate>
              </local-certificates>
            </ssl>
thanks
Bala

Similar Messages

  • Could not establish TLS connection on port 7001 - "unable to get local issuer certificate"

    tvcs: Event="Outbound TLS Negotiation Error" Service="SIP" Src-ip="10.0.7.168" Src-port="29127" Dst-ip="<Public IP>" Dst-port="7001" Detail="unable to get local issuer certificate" Protocol="TLS" Common-name="ewe.<domainname>.com" Level="1" UTCTime="2014-11-12 12:48:20,071" 2014-11-12T15:48:05+03:00
    Getting above error on Expressway-C server while establishing TLS connection with Expressway-E in DMZ. I have enabled static NAT on Expressway-E and give the Public IP on peer address of Expressway-C. At that time, i was getting DNS resolution error  on Expressway-C so we added a host record on local DNS for Public IP. Later, I created CSR from both Expressway C & E server and ask local microsoft team to issue Local CA certificates. After uploading, i was getting above error (Failed to establish TLS). Also i have uploaded company (wilcard) Public certificates (issued from Geotrust) and we are getting the samer error and Expressway server could not establish TLS connection on port 7001. Firewall connections are done and i double checked it. 
    Expressway ver 8.2

    Yes, Exp-C > Peer Address (FQDN of Exp-E)
    Certificate of Exp-E -> When generating CSR from Exp-E, automatically FQDN (Exp-E(hostname).domainname.com) will be shown. Then this CSR will be send to local CA or Public CA to generate a certificate. OR you meant to say in Exp-E CSR we need to add FQDN of Exp-C server also in alternative name and vice versa too.
    Yes, root certificates & intermediate certificates are uploaded to trusted CA.

  • Is there a workaround for coherence::net::messaging::ConnectionException in C++ client?

    Hi,
    When debugging our C++ app we often set Visual Studio 2012 to break on exception which we use to handle... well... exceptional circumstances. However, when connecting, Coherence always throws few (handled) exceptions such as below. Does anyone know a workaround?
    Thank you!
    Michal
    First-chance exception at 0x000007FEFD73940D in cmd.exe: Microsoft C++ exception: coherence::lang::throwable_spec<coherence::net::messaging::ConnectionException,coherence::lang::extends<coherence::io::pof::PortableException,std::runtime_error>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::throwable_spec<coherence::io::pof::PortableException,coherence::lang::extends<coherence::lang::RuntimeException,std::runtime_error>,coherence::lang::implements<coherence::io::pof::PortableObject,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::throwable_spec<coherence::lang::RuntimeException,coherence::lang::extends<coherence::lang::Exception,std::runtime_error>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::throwable_spec<coherence::lang::Exception,coherence::lang::extends<coherence::lang::Object,std::exception>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::TypedHandle<coherence::lang::Object const > >::hierarchy>::hierarchy>::hierarchy>::bridge at memory location 0x0000000000156108.
    First-chance exception at 0x000007FEFD73940D in cmd.exe: Microsoft C++ exception: coherence::lang::throwable_spec<coherence::io::InterruptedIOException,coherence::lang::extends<coherence::io::IOException,std::ios_base::failure>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::throwable_spec<coherence::io::IOException,coherence::lang::extends<coherence::lang::Exception,std::ios_base::failure>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::throwable_spec<coherence::lang::Exception,coherence::lang::extends<coherence::lang::Object,std::exception>,coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void>,coherence::lang::TypedHandle<coherence::lang::Object const > >::hierarchy>::hierarchy>::bridge at memory location 0x00000000062CED88.

    JM140 wrote:
    Hello,
    when I delete an email, it deletes from all of my devices and none of hers (i have an iPad, macbook, and iPhone)
    when she deletes an email it deletes from all of hers and none of mine. (she has an iPhone and macbook)
    So its kind of like a POP3 server splitting to two separate IMAP servers;  my wife's and mine.
    Any ideas everyone?
    Nope, its a POP server acting like a pop server where the settings on each device have it so email is left on the server and only deleted from the devices.
    This means all devices can download the email from the server, but its never really removed from the server, only from the devices upon deletion, unless one of the devices is set to have it deleted from the server when its deleted from the device. 
    Basically, what you want is not possible, as you want an IMAP functionality on only specific devices. IMAP is designed to sync actions across all devices using the account.  Because basically what happens is actions take place on the server, and then trickle down to the devices.
    On POP accounts its the opposite. Actions take place on the Devices and then if configured as such may move up to the server.

  • Network adapter could not establish a connect from external server

    hi,
    I've set up a jdbc thin driver properly using
    the following input:
    "jdbc:oracle:thin:@ipaddress:1521:DBname",
    "username", "password"
    When outside users try to connect externally (outside the network) there is a different ipaddress. Although they are able to ping,
    telnet, run jsp etc... using the external address, they get the following error when they try the thin driver connection:
    i/o exception: network adapter could not establish a connection
    They change the ipaddress in the connection string to match the external ip. We are using oracle 8i, JRun on Linux. I have a feeling it has something to do with the tnsnames.ora file but I can't be sure.
    Any ideas?
    Thanks in advance!

    this is expected behavior ...
    the jdbc thin driver requires the use of an ip address that the calling program has acces to ...
    internally you have one ip address exposed.
    apparently you have another ip address set up for the external customer.
    fyi
    jdbc thin driver don'ts use the tnsnames.ora file -- they use "host:port:sid" because they are required to be platform independent and not access local datafiles or environment variables on the execution platform.
    jdbc oci drivers do use tnsnames.ora which provides the host:port:sid info in their entries.

  • SCS-SSM-10 failover - could not establish a connection

    Hi,
    I'm trying to set up Cicso asa csc-ssm-10 modules for failover, and see the following messasge, when setup is complete and after system failover has been enabled:
    InterScan for CSC SSM could not establish a  connection. The software, hardware, and patch version on the peer  devices must match. Please reconcile the mismatch that was detected and  try again.
    What could be the issue?

    Yes, Jouni you are absolutely right, both devices should be Identical from hardware, software and licensing perspectives here are the output from show module 1 details command from both devices
    ciscoasa# show module 1 details
    Getting details from the Service Module, please wait...
    ASA 5500 Series Content Security Services Module-10
    Model:              ASA-SSM-CSC-10
    Hardware version:   1.0
    Serial Number:      JAF1125001C
    Firmware version:   1.0(11)2
    Software version:   CSC SSM 6.6.1125.0
    MAC Address Range:  001b.54f7.8d00 to 001b.54f7.8d00
    App. name:          CSC SSM
    App. Status:        Up
    App. Status Desc:   CSC SSM scan services are available
    App. version:       6.6.1125.0
    Data plane Status:  Up
    Status:             Up
    HTTP Service:       Up
    HTTPS Service:      Up
    Mail Service:       Up
    FTP  Service:       Up
    Activated:          Yes
    Mgmt IP addr: x.x.x.11
    Mgmt web port: xxxxx
    Peer IP addr:   x.x.x.1
    show module 1 details
    Getting details from the Service Module, please wait...
    ASA 5500 Series Content Security Services Module-10
    Model:              ASA-SSM-CSC-10-K9
    Hardware version:   1.0
    Serial Number:      JAD164401TU
    Firmware version:   1.0(11)5
    Software version:   CSC SSM 6.6.1125.0
    MAC Address Range:  30f7.0dbc.ca96 to 30f7.0dbc.ca96
    App. name:          CSC SSM
    App. Status:        Up
    App. Status Desc:   CSC SSM scan services are available
    App. version:       6.6.1125.0
    Data plane Status:  Up
    Status:             Up
    HTTP Service:       Up
    HTTPS Service:      Up
    Mail Service:       Up
    FTP  Service:       Up
    Activated:          Yes
    Mgmt IP addr:      x.x.x.22
    Mgmt web port:      xxxxx
    Peer IP addr:       x.x.x.2

  • Could not establish secure connection with server

    Hi ,
    We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution?  We would appreciate your quick response..

    hi Alfonso,
    Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
    To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
    start with the CAM and view the hosts table
    cat /etc/hosts
    To check what domain u used to setup the CAM
    cat /etc/resolver.conf
    edit the hosts file so appears like so
    192.168.10.1 cam1.mycompany.com cam1
    192.168.15.2 cas1.mycompany.com cas1
    Verify with 'cat /etc/hosts'
    Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
    Next edit the hosts file for cas1 so that it appears like so
    192.168.15.2 cas1.mycompany.com cas1
    192.168.10.1 cam1.mycompany.com cam1
    Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
    HTH
    George

  • Why does itune keep telling me it could not establish a connection with the software update server

    i have an iphone 3g running on 3.1.3 firmware and every time i plug into my pc running windows 7 it says that it is contacting the software update sever then after about ten seconds it says that update failed could not establish a connection with the server i have tried to disable my firewalls completely and it seems that nothing works nothing is wrong with the iphone it sync's properly and works fine someone plz help me so i can update

    Everybody is tryng to connect to apple,s servers. Try tomorrow, it will be quieter

  • Io exception : The network adapter could not establish a connection

    Hi,
    I installed an agent on Solaris 9 hosted database 9.2.0.1. All is up But when I try to connect database, I receive this error message :
    Io exception : The network adapter could not establish a connection
    thanks for your help
    David

    Thanks for the solution. Today I was stucked up because of same issue and your solution worked for me too ...
    Thanks,
    Sujit

  • Client could not establish a connection to the remote computer

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

  • Help : Cluster Fail over Test - Could not establish a connection

    Hi All
              I'm trying to do Cluster fail over test with two Weblogic 8.1 sp2 instances in cluster.
              During that testing, I'm restarting the one of the instance which is handing my request, to make sure the session is replicated smoothly to the other instance,so that can continue accessing my application without any interuption. But when I restart the instance, I'm getting following exception
              Error 500--Internal Server Error
              java.rmi.ConnectException: Could not establish a connection with 8909815174098071019S:dappsn03:[8201,8201,-1,-1,8201,-1,-1,0,0]:dappsn03-04:TNL:tnl1_81dappsn03, java.rmi.ConnectException: Destination unreachable; nested exception is:
                   java.net.ConnectException: Connection refused; No available router to destination
                   at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:316)
                   at weblogic.rjvm.RJVMImpl.getRequestStream(RJVMImpl.java:488)
                   at weblogic.rjvm.RJVMImpl.getOutboundRequest(RJVMImpl.java:584)
                   at weblogic.rmi.internal.BasicRemoteRef.getOutboundRequest(BasicRemoteRef.java:91)
                   at weblogic.rmi.internal.activation.ActivatableRemoteRef.invoke(ActivatableRemoteRef.java:69)
                   at com.sns.pfk.ejb.PfkSessionBean_mz6mqm_EOImpl_812_WLStub.getPortalRecord(Unknown Source)
                   at com.sns.pfk.servlet.PfkMainServlet.getInfofromSB(Unknown Source)
                   at com.sns.pfk.servlet.PfkMainServlet.doActionDisplay(Unknown Source)
                   at com.sns.pfk.servlet.PfkMainServlet.doGet(Unknown Source)
                   at com.sns.pfk.servlet.PfkMainServlet.doPost(Unknown Source)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                   at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
                   at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:607)
                   at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:400)
                   at com.sns.ana.ui.servlet.AuthorisationBaseServlet.service(AuthorisationBaseServlet.java:109)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                   at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
                   at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
                   at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
                   at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              Buddies, anyone hit this issue before, pls show up some light to escape this hickup.
              With Regs
              -SHAN

    Hi,
              Thanx for ones, spend time on reading this thread.This problem was due to some missing entries in weblogic-ejb.xml. This got fixed as we got support from BEA.
              With Regs
              -SHAN

  • Network adopter could not establish a connection

    Hi iam new to sql developer
    When Ever i try to connect databse which is placed on server
    it reports an Network Adopter failure error
    Can you tell me why it is so?

    i am using sql developer 3.0 and using 10g database
    I want to also mention that database is on server and i am using client machine
    i am using parameters like
    connection name = Apps
    username = xyz
    password = ******
    then selecting Tns as connection type
    in network lais field all tns entries are shown
    and i select my required alias and click test then Fillowing error occurs
    Test failed ; Network adapter could not establish the connection
    Edited by: Green on Apr 22, 2011 10:29 PM

  • HT4623 my i phone could not connect to itunes  .. prompt says could not establish secure connection to iTunes

    my iphone 4 wont connect to itunes... everytime i plug it in to my computers prompt saying " itunes could not connect to this iphone.Could not establish a secure connection to this device.
    help!

    https://discussions.apple.com/thread/4057670?start=15&tstart=0

  • Safari could not establish secure connection to my localhost with self signed certificate

    was using maven+grizzly+jersey to start my own server. I created self signed certificate so that my server can support https. I case you are curious, following is how I generated my certificate
    I was testing this on my iMac (Running Mavericks) Now, I added the server.cert to the system keychain so that all users can trust this certificate. Also, I change the trust level to "Always Trust".
    I get this work in Chrome and Firefox. They asked me to add exception for this certificate, I did and then everything goes fine. However, I have never make Safari(7.0) happy. I always get the error saying that Safari cannot establish secure connection to my localhost.
    Does anyone have any idea why it happened? Or is there better way to debug this problem so that I will be able to tell at which step things goes wrong.
    Thank you in advance. I really appreciated it.

    Any help much appreciated!

  • "Could not establish secure connection to requested site" error

    When in DW Live view I get the popup error numerous times (regardless of whether I click No or Yes). I think it might be related to my code - in there I have an https: script that calls to google maps on a button action but I'm NOT clicking any button so I'm not sure why it's happening within DW but it's a serious workflow issue. The file seems to work fine in Safari here: http://artichokemedia.com/Parkhopper/

    Any help much appreciated!

  • Java.sql.SQLException: Io exception: The Network Adapter could not establish the

    Dear all,
    I have been trying to connect to Oracle 8 from Java but without success.
    I am using the following driver: oracle.jdbc.driver.OracleDriver
    and the thin protocol as follows:
    jdbc:oracle:thin:userid/password@databasename:1512:sid
    I am getting the error message:
    java.sql.SQLException: Io exception: The Network Adapter could not establish th
    connection
    I am using jdk1.3 with classes12.zip added to the classpath settings.
    Can anybody help please.
    Regards,
    [email protected] or [email protected]
    null

    Dear colleague,
    I am using a stand alone database running on my windows 98 laptop.
    I connect successfully via sql plus using the user id: scott and password tiger.
    Below is the entry of my tnsname.ora:
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    I am finding difficult to specify a host, but I have tried the following combinations:
    DriverManager.getConnection ("jdbc:oracle:thin:@koudry:1521:PLSExtProc","scott", "tiger");
    where the machine name is koudry and PLSExtProc the sid.
    DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:PLSExtProc","scott", "tiger");
    and also 127.0.0.1 which is the ip address of the localhost. All these give me the following error:
    Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
    ter could not establish the connection
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
    at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:263)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
    va:365)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at web.main(web.java:10)
    When I use the oci protocol like:
    DriverManager.getConnection ("jdbc:oracle:oci8:@127.0.0.1:1521:PLSExtProc","scott", "tiger");
    I get the following error:
    Exception in thread "main" java.lang.UnsatisfiedLinkError: make_c_state
    at oracle.jdbc.oci8.OCIDBAccess.make_c_state(Native Method)
    at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:233)
    at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:249)
    at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
    va:365)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
    at java.sql.DriverManager.getConnection(DriverManager.java:517)
    at java.sql.DriverManager.getConnection(DriverManager.java:177)
    at web.main(web.java:10)
    Below is the entry for autoexec.bat:
    set classpath=.;c:\oracle\ora81\jdbc\lib\classes12.zip;
    mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
    mode con codepage select=850
    keyb uk,,C:\WINDOWS\COMMAND\keyboard.sys
    SET Path=c:\Oracle\Ora81\lib;c:\Oracle\Ora81\bin;"C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN";C:\WINDOWS;C:\WINDOWS\COMMAND;C:\;C:\DOS;C:\JDK1.3\BIN;C:\MSSQL7\BINN;C:\JDK1.3\SRC;
    Can anyone see what I am doing wrong.
    Thanks,
    Richard Koudry
    null

Maybe you are looking for

  • Zire 21 Problems with Vista- No Users?

    Hi. When I open Palm Desktop, it prompts me to select a user, but there isn't one there. I've tried re-installing my palm software several times. the strangest part is that when I first installed Palm Desktop, it worked fine, but then I re-installed

  • USB Ports on 17"

    I remember reading in one thread or another that one of the USB ports puts more power than the others. I think someone was trying to address why their external BUS powered USB HDD wasn't working. Someone suggested switching USB ports because of the p

  • Running Crystal Reports

    How do I restrict users to being able to run Crystal Reports via "schedule" only? (version X1)

  • Table cell borders not always visible

    I created a PDF out of an existing Word doc. The doc is a table. The visibility of the table borders is unpredictable in the PDF. At certain zoom levels some disappear/reappear, and there doesn't seem to be a consistent pattern or behavior. Any thoug

  • Will Adobe make a product that is Adobe Muse combined with Adobe Edge Reflow?

    I love how Adobe Muse works, its simple and very easy to learn. The only issue I have with the program is, the sites that I produce from Muse is not a fully responsive site. I was wondering if Adobe will allow us to set-up our own breakpoints in the