Cfid & cftoken keep resetting everytime time the page refreshes!!!!

I need some assistance. I have setup several CF applications and never had any issues with session/application management. However this time around every time I refresh the page it gives me a new cfid and cftoken. Obviously it won't allow me to keep my session and I get redirected to the log in page. Here is how I am setting up my application. Does anyone see any issues with this?
<cfscript>
This.name = 'ApplicationName';
this.clientmanagement="no";
This.sessionManagement = "yes";
This.applicationtimeout = CreateTimeSpan(0,1,0,0);
This.sessionTimeout = CreateTimeSpan(0,0,20,0);
This.scriptProtect="All";
This.setclientcookies = "no";
This.setdomaincookies = "no";
</cfscript>
Side question, when is the cfid and cftoken suppose to change? When I land on the page for the first time before I log in the cfid & cftoken get set. That will be the same cfid & cftoken for the full session. Then the cfid & cftoken gets dropped once the application has timed out? (maybe a dumb question...)
Please Help!!!

If you setclientcookies to be FALSE ("no", whatever), then you need to deal with the CFID & CFTOKEN values yourself (generally by passing them on every URL in your site. Which is a right PitA.
Are you sure you meant to set it to FALSE?
Adam

Similar Messages

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

How do I make a web page that changes every time the user refreshes it? Is it possible in Muse?

Hi, i'd like to make quite a simple website where the main text in the centre of the page changes every time the user refreshes the page in their browser. I assume i'll have to make one master, and multiple pages that are all the same except for the changes in the text, but i'm not sure how to make it so that every refresh directs to a different page and not just the home page? Is this even possible in Muse?
This is an example of what i'm going for: :: procatinator ::
Thanks!

You can't do it with Muse alone. Would probably be fairly simple to do with a bit of Javascript. Check the widget directory as it is possible someone has made a widget for random content. If not, maybe I will make one this weekend. ;-)

My magic mouse keeps jumping all over the page

Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.

Thanks so much for replying Barry. Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work. Have to wait over a week to get into Apple store so I guess I've just got to wait. This is my second magic mouse and its driving me crazy. Touch pad also playing up but thanks for the advice and have a good day.
Megs

I have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

i have a problem mackeeper keep opening up another tab and these little green circle stuff keep popping up on the page and overtime my cursor hover over it it pops up a little box with stuff in it does anyone have an idea how to get rid of it?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.2c232f1e4d12129e.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.2c232f1e4d12129e.daemon.plist
/Library/LaunchDaemons/com.2c232f1e4d12129e.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/2c232f1e4d12129e
/System/Library/Frameworks/v.framework
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

TS3899 I am unable to access my mail account. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

I am unable to access my mail account on my iphone, which I have been able to do previously. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

Close the mail app, double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

HT4550 My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do i remove it

My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do I remove it.

Hold the shift key down and launch Safari.
If not, try suggestions made in this article.
http://reviews.cnet.com/8301-13727_7-57393558-263/tackling-macs-that-always-boot -to-safe-mode/
Best.

My iPhone 3GS keeps resetting every time I push the button at the bottom to turn

My iPhone 3GS keep rebooting every time I try to turn on iPhone pushing button at the bottom of iPhone
Now the iPhone will not do anything unless I plug charger into iPhone then it still try's to reboot and then turn off
ANY HELP WOULD BE GREATLY APPRECIATED. THANKS AND HAVE A GREAT DAY
SUMMEROG

#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

Shouldn't variables reset each time the frame plays?

In my flash program I have everything on one frame. In the actionscript on that frame, I made a variable called currentButton and set it to the first button, to keep track of which button is currently pressed. In the click function this variable is changed to whatever button was clicked.
Now, I didn't think this would work, because seeing that the one frame is being played over and over, (there's no stop() command in there) I thought currentButton would keep being reset every frame. To my surprise, it worked just fine. Not that I'm complaining, but I'd like to know why it's doing that. Shouldn't all the code on the frame be done every time the frame is played, including the part that sets currentButton to button1?

The frame is not played over and over... you can easily test by just putting trace("hello"); in frame 1 and testing. You'll see hello only one time. Unless you have more than one frame, the stop is automatic.

JSF and ADFBC: How to Run a method every time the page is posted back

Hi everyone,
I am using ADFBC and JSF in my project, and there is a page which runs the following logic: The page displays a set of radio options and a submit button. It has a total of 4 options, but they never display all at once. For example, when user enters the page for the first time, only selectItem 1 displays. When it clicks on the submit button, the page is posted back and hides the first select item, showing now the second, and so forth. The steps i did to achieve this are:
1 - Created a method on the App Module that inserts a row corresponding to the select item choice.
2 - Created another method that verifies which is the lastly entered row and returns a string containing the relevant attribute, for example, "E".
3 - Created the methodAction binding to run the insertMethod (1) and retrieveMethod (2).
4 - Created an invokeMethod executable for the retrieveMethod (2) and set the refresh property to "always".
5 - Created a variableIterator with a variable to hold the retrieveMethod return, also setting the refresh to "always".
6 - Lastly, bound the "rendered" attribute of each select item to the variable's value, for example "#{bindings.returnVariable == 'E'}
When i run the page, the logic works almost fine, except for one detail: When the user clicks the button that calls insertMethod, the page is posted back, and i assume the selectItems should be re-rendered accordingly. Yet, the button click inserts the row in the DB (called insertMethod) but keeps showing the previous radio item. If i restart OC4J, when i enter the page again the radio is now correct, showing the next option.
Do you know how can i tell the page that the model has been refreshed, so it runs the retrieveMethod again, alters the variable and the radio options without having to leave the page or restarting OC4J?
Thanks in advance for your help!
Regards
Thiago Souza

Hi all,
It seems i have figured out the error. It was a logic mistake on my method, ADF was doing the refreshes just fine. There is another little question i wanted to ask now: I need to execute a JSF Navigation Case when the page loads, in order to navigate to another page due to a certain condition. is there any way to run some logic to redirect the request before the page has been rendered, just like the onLoad() javascript event runs on the body every time it gets loaded?
What i'm trying to do exactly is this: When the login.jspx page runs the "success" navigation case, it goes to "page1.jspx". But before "page1.jspx" is loaded, i need to run an Application Module method to check for a certain situation; if this criteria is not met, i must run "fail" navigation case, from "page1.jspx" to "page2.jspx" without ever displaying page1.jspx.
Is it clear enough? Can you guys give me some pointers on how to do it?
Thanks a lot!
Thiago

The scroll bar stops moving with the cursor after the frist inch or so down the page, even though the cursor keeps moving as does the page itself.

This problem started about 4-5 days ago.
After i scroll down a bit on a longer page, the scroll bar is still near (not at) the top. The page is scrolling at that point based only on me continuing to move the cursor in the scroll bar vertical column - even though not in line with the actual scroll bar itself. Then when I put the cursor on the actual scroll bar the page jumps back up to near the top of the page.
Thanks for any help.

Are you using code in userContent.css or Stylish?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
Firefox Safe mode also disables the customizations in the userChrome.css and userContent.css files.
See also:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=787465 bug 787465] - scrollbars don't update sometimes

Web garden - first time the page loads only one chart appears

I have a page with 2 charts in a web garden(it's a sharepoint application). The charts are created programmatically in the Page Load ethod of a custom webpart. Originally we had issues with charts appearing and disappearing but I have changed
the config setting to the following and both charts appear most of the time:
<add key="ChartImageHandler" value="storage=file;timeout=20;dir=C:\inetpub\wwwroot\wss\VirtualDirectories\Myweb\uploadertemp\;" />
The problem I'm having is that the first time a user views the page only one of the charts appears. If i navigate away and return to the page both charts appear. Is there and issue with my config settings that is causing this behaviour?
Thanks
Karen

The answer to this (after months of toying with settings and permissions) is not to user the chart control in a web garden. I have seen the same issue multiple times on-line, with no concrete solution offered .
My workaround is to save the chart to a memory stream and write it to the page as an image, not as a chart control:
Chart chart = new Chart();
//Add data and chart settings here........
using (var chartStream = new MemoryStream())
chart.SaveImage(chartStream, ChartImageFormat.Png);
System.Web.UI.WebControls.Image chartImage =
new System.Web.UI.WebControls.Image();
chartImage.ImageUrl =
"data:image/png;base64," + Convert.ToBase64String(chartImage.GetBuffer());
chartParentControl.Controls.Add(chartImage);

How do you keep your place on the page

we are trying to go paperless in my office, but the biggest complaint form the user is.
"Hey when we did this on paper we never lost our place because we put a ruler under the line we were working on. We would stop printing if you can tell us how to to the EXACT same thing with the pdf's"
to let you know they are looking at scanned imiages that have been locked. so even if i could get them to accept highliting (which they flat out rejected) it does not work with imiages.
in practice what they really want is a way to throw up semi transpartent box, that would highlight where they currently were, that they could simply use the arrow keys to move up and down the page.
Does adobe (reader of full) have any function close to this? does some one have a viable alternative? might there be an addon or plug in that achieves this?
Thank you in advance for your help
Kevin

Thank you for the help.
How ever since the documents are locked the commenting tools will not enable.
as well that would not meet managements requirements. of Simple to move up and down the page like a ruler.

On a page change, GIFs in the orignating page stop animating - how can I keep them animating until the page actually changes?

On some pages in my application I put up a mask and a loading dialog when changing page. This dialog has a GIF as a background image as a loading/waiting indicator. This GIF plays one or two frames and stops when the pages begins its redirection to the target page.
Page change initiated using javascript: location.href ...
FF 19 MAC OSX

You can render the ebook on an instructional application called Zankura. Not only can you control the screen scrolling, but all the students can freely annotate with their stylus. www.zankura.com.

Pleae Help: Youtube keeps loading/Downloading after a page refresh

I'm on 10.6.6 and using Safari 5.0.5. I have disabled extensions in Safari just to make sure. Also, I have no addons in Safari.
Here is the problem:
When I load a Youtube video, it starts loading and I can see the download speed in my menubar using iStatmenus.
Problem is if I click on the video and load it a bit then I change my mind and go to another Youtube clip, I refresh the page and the video keeps downloading. No mater what I do, it keeps downloading. The only way to stop the download is to quit Safari. I do not see this behavior in Chrome or Firefox.
Could someone try it out and tell me if it's normal or if it's my configuration that's messed up, thanks!

There are very few "sure fire fixes" for a browser problem. The best we can do is offer suggestions. I stick with the basics for the most part. If you are running an older version of the Mac OS X, then try the combo update.
You might try removing the Downloads.plist file from ~/Library/Safari then restarting your Mac.

Cfid & cftoken keep resetting everytime time the page refreshes!!!!

Similar Messages

Maybe you are looking for