CFIMAGE not working when there is a . in the file path?

I’m trying to use CFIMAGE for the first time and running into an issue. I am guess it is because my path has a period in it but I am not sure and I am not sure how to get around it if that is indeed the problem.
I’m using ExpandPath to get the directory path but I have tried it other way with the same result. The path is
C:\Websites\mywebsite.com\www\images
I’m just trying to take a file in the C:\Websites\mywebsite.com\www\images\temp directory and resize it then rename it to the memberid with 300 on the end and save it to this directory C:\Websites\mywebsite.com\www\images\members
        <cfimage
        action = "resize"
        height = ""
        source = "#ExpandPath("..\images")#\temp\#TempFileName#"
        width = "300"
        optional
        destination = "#ExpandPath("..\images")#\members\"
        name = "#ARGUMENTS.MemberID#300"
        format = "jpg"
        overwrite = "yes">
I keep getting the folowing error.
The com\www\images\members\ image format is not supported on this operating system.
Any ideas?

was the fact that I ahd both destination and name being used
at the same time.
Using both "destination" and "name" works fine for me on windows. Though as I said, it is usually more common to use one or the other (not both).
all I did was copy and paste
from Adobe's example.
Given the fact that your code contained the word "optional", you may have inadvertently copied a usage/syntax description rather an actual code example. Most of the descriptions contain the word "optional" to separate the mandatory and optional attributes. They are just descriptions not working code. Look for the actual code examples further down in the page (usually in a mono-font like courier).

Similar Messages

  • I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

    I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
    regards
    Hemang

    Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc.  The more information we have about your environment will help us assist you better.  But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

    my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

    Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

    All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

    They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
    Mylenium

  • It is not working when jsp is outside of the Controller(.jpf) directory

    Hello,
    I am new to Portal. I am using Weblogic 8.1SP2. The problem is when there is a general jsp I want to put it common directory. It is working fine when I run starting from individual Controller but When I put its portlet in Portal, then the action is NOT falling into its caller's Controller but into the root Controller. Is this normal ? Is there a way to have the action call back to its caller Controller ? The director structure is :
    ../portalWeb
    + flowControllers
    + common
    search.jsp
    + portlet1
    Portlet1Controller.jpf
    Portlet1Controller.portlet
    + portlet2
    Portlet2Controller.jpf
    Portlet2Controller.portlet
    Controller.jpf
    And in the search.jsp file I have javascript snippet code like :
    if ( <%= type%> == 1 ){
    document.forms0].action="startPersonSearch.do"; //Portlet1Controller action
    if ( <%= type %> == 2) {
    document.forms[0].action="startCompanySearch.do"; //Portlet2Controller action
    document.forms[0].submit();
    Please help. Any thought will be greatly appreciated.
    Christina
    Thanks in advance.

    Yes. I did try to put directory path in front of the action to tell which Controller it should go. It didn't throw exception but It acted like called directly from that Controller. It is not under portal.
    Does anyone think the approach to have the common used jsp outside the Controller feasible ?

  • HT201290 why is QuickTime Player not working when i try to open this files i got in a external hard drive some one els lend me ???

    i have a macbook that was resantly upgrade we running Yosemite 10.9 OS and the external hard drive is fairly current brand name WD capacity 500GB with 147GB free lots of its contents are QuickTime Player videos that will like to open some other media is available in different format and is working properly, i have download a more current version of QuickTime Player and it sound better at list sound like it is going to star playing but it don't... so please if some one can help me with some answers will be real appreciate , thank you kindly looking forward to hear from you is my first time asking questions about apple it feels a bit like a shoot in the dark !

    Is the friend's external drive where you said these files are, correctly formatted
    for use with Mac OS X, or is it set up for use solely with a Windows format?
    If you copy one of the QuickTime files into a folder, in your computer and try
    to run it from there, does it work at that point? It may not. Could be the drive
    you borrowed from a friend has some other issue; perhaps creator account
    and permissions may also be limited by how the content was added there.
    There is way too much missing information for me to guess, but I wonder about
    how the hardware was set up and if the files are actually available to your Mac.
    The QuickTime support page itself should be a portal to more information...
    QuickTime
    The above link is part of this larger section:
    http://www.apple.com/support/mac-apps/
    Perhaps someone will see this ASC discussion thread later in the day (2AM here)
    and maybe can offer a more direct reply. There are several articles in Apple Support
    database for applications and other items (such as QuickTime) & the support site is
    searchable. Sometimes the database is hard to find exact articles or topics, though.
    Hopefully the issue is not too difficult to determine the cause...
    Good luck & happy computing!

  • Why does the "Move to new window" function that I used to use not work when I right click on the tab anymore?

    It used to be when I right clicked on the tab in Firefox that I could use the "Move to new window" option. Now when I go down to that option it looks as though it is going to work, but nothing happens. The other day I changed a few options in Firefox, but I don't remember changing anything that sounded as though it would have this effect and now I can't find any options that seem to fix it. Thanks in advance for any help.

    Hello Beorn, probably the problem is an extension that isn't working correct.'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    thank you

  • Ajax tabs not working when asp dropdown list in the tab

    I am using asp.net 3.5 framework. My page has modelpopup in that ajax tab controls used. one of the tab has asp:dropdownlist, this dropdown list is binding data from dataset. the tab which has dropdown lists is not working. it is working fine in IE9.0.
    Sys.WebForms.PageRequestManagerServerErrorException: Sys.WebForms.PageRequestManagerServerErrorException: Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.

    changed to enableEventValidation="false", then it is working fine.

  • My bookmarks have disappeared and the 'restore' process is not working - Firefox is 'unable to load the file' I selected as the backup file.

    Yesterday, I was unable to access Firefox at all and had to use another browser. Today, Firefox is back but all my bookmarks seem to have disappeared. I followed the procedure for restoring bookmarks from a backup file. I selected the file to back up from, but I received an error message saying that Firefox could not access that file.

    Did you install the Places Maintenance extension and checked the places.sqlite database file?
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • MouseClick trough a vector shape not working when there is a bitmap below it?

    Hello, I got something strange going on.
    I have one class called Person that extends a Sprite.
    First i have a bitmap that i add to the sprite class:
    This bitmap is a transparent PNG.
    addChild(_imageBitmap);
    then i did some drawing in Flash that has the shape of this person and extended this to
    the SimpleButton. This way, only the edge or the inner shape is clickable.
    then i add this shape to this Person class too.
    addChild(_personShape);
    This way, the shape is on top of the bitmap.
    Now i have an clickable item behind this person. This item is visible because it  is in the
    transparent area of the bitmap and shape.
    This clickable item does not respond on the mouse click! Only when i disabel the imageBitmap
    (I tried uncomment the line addChild(_imageBitmap) and then it works just fine!
    This means that the bitmap is causing the problem to get a click trough.
    Is there a propertie for a bitmap like MouseChildren = false? or something else to make use
    of a click trough within a shape?
    Regards,
    Chris.

    Hello Ned,
    Thanks for the advise, but i already tried the mouseChildren properties.
    The bitmap has no property mouseChildren, so i created a new Container (sprite) and added
    this bitmap to it and set the mouseChildren property to it. and the MouseEnabled too, but nothing happend differently.
    The strange thing of this, is the fact that the rollOver and the RollOut item behind the bitmap image works just fine.
    It has probably something to do with the fact that the clickable item is an displayObject3D (Papervision)
    But what i also don't understand is when i don't use this bitmap, and only the vector shape it works just fine.
    So i did a little trick, i did a break apart from he image and cut out the shape of the person with the lasso tool.
    And i replaced this with the image shape and now it works.
    Regards,
    Chris.

  • Why does my volume control on my iPod touch only work when i have Earbuds or Headphones or a speaker connected to the headphone jack, and not also when there is nothing in the jack?

    I can't adjust the volume of the iPod Touch when it has nothing plugged into the headphones jack, but i can adjust it when i have earbuds or headphones or a speaker ;plugged into the iPod Touch

    Try cleaning out/blowing out the headphone jack. Insert/remove the the headphone plug a dozen times or so.
    Try the following to rule out a software problem.:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. Could be a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Tabbed browsing does not work when i click on (+) or thru file-new tab also?

    When i wish to open a new tab either by clicking mouse over the + sign on the current tab or by file-new tab menu access, tabs are not opened. it works only when clicking on links in present window. earlier i could open tabs at will.

    Disable or uninstall the Ask Toolbar extension, there's a problem with it in Firefox 3.6.13.

  • Javascript not working when pdf is rendered in the browser IE9

    I have a javascript on the initialize event of a field and it works fine when doing a Preview PDF but not when i render the PDF in the browser
    if(F.Page_1.field1.rawValue == null)
               F.Page_1.field1.presence = "invisible";
               F.Page_1.field2.presence = "visible";
    Can some one pelase help?
    Thanks,
    F.Page_1.field1::initialize - (JavaScript, client)

    Hi,
    The initialize event is supported in browsers, but the issue may be if the form is saved as a Dynamic XML Form in the save-as dialog in LC Designer. Or if you using LC Enterprise Suite to render the forms at runtime, if you have set the render in LC Designer: File > Form Properties > Defaults to Dynamic XML Form:
    Changing an object's presence requires a dynamic form.
    Niall

  • Flash Vars is not working when we accessing from other class files

    Hi all, I'm currently developing a flex application where i
    need to pass the data from the flash vars to the other class files
    instead of the main actionscript class file.
    Does any body know how i should go about doing that?? you can
    see this below code : please help me out if u know how to solve
    testnew2.as file
    package {
    import flash.display.Sprite;
    import flash.display.LoaderInfo;
    public dynamic class testnew2 extends Sprite {
    public var
    xmlfile:String=String(root.loaderInfo.parameters.lists);
    public function testnew ():void{
    package {
    import flash.text.TextField;
    import flash.display.Sprite;
    import flash.display.LoaderInfo;
    public dynamic class testnew extends testnew2 {
    public function testnew () {
    var myText:TextField = new TextField();
    // this assumes that you are going to pass in an id variable
    // on the end of the myFile.swf?id=12345 or
    // use FlashVars in the HTML parameter list for instance
    // 'FlashVars', 'id=123456', 'width', '1024',
    myText.text = new testnew2().xmlfile;
    addChild(myText);
    but if we access in same file it is working fine:
    package {
    import flash.text.TextField;
    import flash.display.Sprite;
    import flash.display.LoaderInfo;
    public dynamic class testnew extends Sprite {
    public function testnew () {
    var myText:TextField = new TextField();
    myText.text = String(root.loaderInfo.parameters.lists);
    addChild(myText);

    Pass the data into the main app, then from there either pass
    it into the sub-components or use
    Application.application.parameters, or bind to the values.
    Tracy

Maybe you are looking for