CFL for user defined object in matrix
I am creating CFL for city .For this I created a user defined table and later registred it to create the object of City.I created the CFL for City as ,
Private Sub AddCFL()
Dim intI As Integer
Dim objCFLsName As SAPbouiCOM.ChooseFromListCollection
Dim objParaName As SAPbouiCOM.ChooseFromListCreationParams
Dim objCFLName As SAPbouiCOM.ChooseFromList
Dim objCons As SAPbouiCOM.Conditions
Dim objCon As SAPbouiCOM.Condition
Try
objForm = SBO_Application.Forms.ActiveForm
For intI = 0 To objForm.DataSources.UserDataSources.Count - 1
If objForm.DataSources.UserDataSources.Item(intI).UID = "CityName" Then
Exit Sub
End If
Next
objForm.DataSources.UserDataSources.Add("CityName", SAPbouiCOM.BoDataType.dt_SHORT_TEXT)
objCFLsName = objForm.ChooseFromLists
objParaName = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
objParaName.MultiSelection = False
objParaName.UniqueID = "CFL"
objParaName.ObjectType = "City"
objCFLName = objCFLsName.Add(objParaName)
objCons = objCFLName.GetConditions
objCon = objCons.Add
objCon.Alias = "U_Active"
objCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
objCon.CondVal = "Y"
objCFLName.SetConditions(objCons)
Catch ex As Exception
SBO_Application.MessageBox("AddCFL()=" & ex.Message)
End Try
End Sub
I want to load city names in matrix using this cfl.For this, I added few blank rows in matrix.Then I binded the matrix as ,
Private Sub BindMatrix()
Dim objColumns As SAPbouiCOM.Columns
Dim objColumn As SAPbouiCOM.Column
Dim matDetails As SAPbouiCOM.Matrix
objColumn = objColumns.Item("CityName")
objColumn.DataBind.SetBound(True, "", "CityName")
objColumn.ChooseFromListUID = "CFL"
objColumn.ChooseFromListAlias = "CityName"
objColumn.Editable = True
matDetails.LoadFromDataSource()
End Sub
Problem is created by ChooseFromListAlias .It gives error as,
Data Source - Alias Not Found
If I remove that statement, the cfl fires when I press tab in the matrix.But I can not set value in the matrix.
I created CFL as,
Private Sub AddCFL()
Dim intI As Integer
Dim objCFLsName As SAPbouiCOM.ChooseFromListCollection
Dim objParaName As SAPbouiCOM.ChooseFromListCreationParams
Dim objCFLName As SAPbouiCOM.ChooseFromList
Dim objCons As SAPbouiCOM.Conditions
Dim objCon As SAPbouiCOM.Condition
Try
objForm = SBO_Application.Forms.ActiveForm
For intI = 0 To objForm.DataSources.UserDataSources.Count - 1
If objForm.DataSources.UserDataSources.Item(intI).UID = "CityName" Then
Exit Sub
End If
Next
objForm.DataSources.UserDataSources.Add("CityName", SAPbouiCOM.BoDataType.dt_SHORT_TEXT)
objCFLsName = objForm.ChooseFromLists
objParaName = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
objParaName.MultiSelection = False
objParaName.UniqueID = "CFL"
objParaName.ObjectType = "City"
objCFLName = objCFLsName.Add(objParaName)
objCons = objCFLName.GetConditions
objCon = objCons.Add
objCon.Alias = "U_Active"
objCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
objCon.CondVal = "Y"
objCFLName.SetConditions(objCons)
Catch ex As Exception
SBO_Application.MessageBox("AddCFL()=" & ex.Message)
End Try
End Sub
Private Sub BindMatrix()
Dim objColumns As SAPbouiCOM.Columns
Dim objColumn As SAPbouiCOM.Column
Dim matDetails As SAPbouiCOM.Matrix
Try
If SBO_Application.Forms.ActiveForm.UniqueID = "TourDetails" Then
matDetails = SBO_Application.Forms.ActiveForm.Items.Item("matDetails").Specific
Else
matDetails = objForm.Items.Item("matDetails").Specific
End If
objColumns = matDetails.Columns
objColumn = objColumns.Item("#")
objColumn.DataBind.Bind("objDT", "#")
objColumn.Editable = False
objColumn = objColumns.Item("CityName")
'If strPara = "Edit" Then
objColumn.DataBind.Bind("objDT", "CityName")
'Else
' objColumn.DataBind.SetBound(True, "", "CityName")
'End If
objColumn.ChooseFromListUID = "CFL"
'objColumn.ChooseFromListAlias = "CityName"
objColumn.Editable = True
objColumn.Width = 290
objColumn = objColumns.Item("NoOfVisits")
objColumn.DataBind.Bind("objDT", "NoOfVisits")
objColumn.Editable = True
objColumn = objColumns.Item("FromDate")
objColumn.DataBind.Bind("objDT", "FromDate")
objColumn.Editable = True
objColumn.Width = 80
objColumn = objColumns.Item("ToDate")
objColumn.DataBind.Bind("objDT", "ToDate")
objColumn.Editable = True
objColumn.Width = 80
matDetails.LoadFromDataSource()
Catch ex As Exception
SBO_Application.MessageBox("BindMatrix()=" & ex.Message)
End Try
End Sub
Edited by: Dilip Kumbhar on Mar 31, 2010 10:02 AM
Similar Messages
-
Crystal Report Templates for User-Defined Objects
Hello Experts,
I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
Any help would be appreciated.
Thanks,
PraneethIf this is still a problem please re-post to the SAP Integration Kit forum.
-
Portal Entitlements for user defined objects
Hi,
The UUP aggregates the user profile information from different backed data sources.
One of the properties in the propertyset is a multivalued property. I populate
this by the following code:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,"DA_Privilege");
String str="LAB1_CAPLinks_ViewReports" + "," + "LAB1_CAPLinks_EditReports"; //hardcoded
for testing
propertyCache.put(propertyMapKeyM,str);
(This code resides in the MyEntityPropertyManager)
When I go to the portal administration screen, I do not see the values, it instead
only gives me the object id of the java String array.
Could someone please help me with the following questions:
1. How do I populate the multivalued property ? I see in documentation that there
is 2 different PropertyCache implementation......confused which one to use and
how.
2. Is there a way to define user defined objects in UUP and have portlets entitled
to the state of the object ? (a custom entitlement code)
3. Any sample code would be helpfull
Thanks,
UdayThank You Greg. Now it works.
-Uday
Gregory Smith <[email protected]> wrote:
I'm not totally sure, but I would imagine you want to put a List of
Strings into the propertyCache if the property is supposed to be
multivalued text, e.g.:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,
"DA_Privilege");
List strs = new ArrayList(2);
strs.add("LAB1_CAPLinks_ViewReports");
strs.add("LAB1_CAPLinks_EditReports");
propertyCache.put(propertyMapKeyM, strs);
I know that all of the code that calls the UUP and property sets code
expects a Collection back from a multivalued property (but I'm not sure
about a UUP implementation).
Greg
Udayraj Nair wrote:
Hi,
The UUP aggregates the user profile information from different backeddata sources.
One of the properties in the propertyset is a multivalued property.I populate
this by the following code:
PropertyMapKey propertyMapKeyM = new PropertyMapKeyImpl(null,"DA_Privilege");
String str="LAB1_CAPLinks_ViewReports" + "," + "LAB1_CAPLinks_EditReports";//hardcoded
for testing
propertyCache.put(propertyMapKeyM,str);
(This code resides in the MyEntityPropertyManager)
When I go to the portal administration screen, I do not see the values,it instead
only gives me the object id of the java String array.
Could someone please help me with the following questions:
1. How do I populate the multivalued property ? I see in documentationthat there
is 2 different PropertyCache implementation......confused which oneto use and
how.
2. Is there a way to define user defined objects in UUP and have portletsentitled
to the state of the object ? (a custom entitlement code)
3. Any sample code would be helpfull
Thanks,
Uday -
Transaction Notification For User Defined Object
Dear Expert,
I want to create a transaction notification for my user defined form. I have a matrix on my form which has a field as 'Code'. I want that this field (On Row Level) should have unique values all the time while adding or updating the form.
Object Type: MaterialMaster
Table Name: MaterialDetails
FieldName: U_Code
Plz help me to get this notification.
RegardsHi Amit,
Please check below query.
IF @object_type = 'MaterialMaster' AND @transaction_type IN('A','U') and @error = 0
BEGIN
IF ( SELECT COUNT(*)
FROM MaterialDetails A
WHERE A.U_Code IN (SELECT U_Code FROM MaterialDetails WHERE U_Code = @list_of_cols_val_tab_del)
GROUP BY A.U_Code
HAVING COUNT(*) > 1
) >1
BEGIN
set @error = -10
set @error_message = 'You can not Add Dublicate Code'
END
End
Hope this help
Regards::::
Atul Chakraborty -
Make CFL for user defined tables in Crystal Report 8.8 ?
Hi Experts
Use Follwing qry for CFL ( user defined tables) in Crystal Report But its not Show CFL after run the Report in SAP B1 8.8
Period@Select T0.* from @OICC T0
Thanks & Regards
Dinesh LadeHi,
As far as i know, SBO can't figure out in such instance what are you doing, try linking it to an original table.
I usually use OADM for this purpose.
Hope this helps.
Regards,
Daniel -
Document numbering for User Define Object
Hi,
Anyone know how to use numbering series in UDO?
I've created 3 doc series for the object. one off the series is the default. When i select other doc series on my form, after I add the doc, the series code is captured but the the number is wrong. it took the default number.
eg..
Series A: 1-999 as default
Series B: 1000 -1999
I pick B and add, Series code is ok but the number taken is from series A.
Q.Hi Andy,
The system is supposed to get the correct number as you would expect. However there is a bug in SAP Business One 2007 A Release.
If you have access to the Note 1266379 you can see the detailed scenario as described by you.
Currently the issue is planned for fixing in February 2009 patch for 2007A. You can check the info.txt file to see if the fix was included.
Kind Regards,
Friederike
SAP Business One Forums Team -
How to popup form according to query by CFL for user defined tables?
Hi Experts!
Please write a simple code for adding CFL in UDO and popup the window according to query. suppose i want to execute query
"select code,name from [@WITM]". I want to add CFL in edittext which is on UDO. how can we add CFL in that Edittext by code.
Thanking You
vishwajit kumarHi Vishwajit,
Please response to your previous posting or close it first. Whatever the answer working or not, you need reply.
Thanks,
Gordon -
Using User Defined Object in B1if
Hello Expert,
I am trying to configure the B1if scenario for User Defined Object, But when i check the consistency of the scenario there are three issues
1. 0142 vBIU warning - inbound - channel: defined object identifier is not listed in the repository
2. 0259 vBIU inconsistency - outbound - details: 'Service Method Identifier' is not correct
3. 0262 vBIU inconsistency - outbound - details: 'Get Method Identifier' is not correct
I have prepared the Test as a UDO in SAP B1.
*CONFIGURATION*
Scenario Step Definition INBOUND - CHANNEL
Channel : INB_B1_EVNT_ASYN_EVT
Type : SAP Business One
Mode : Asynchronous
Trigger : B1Event
Object : Test
Identification Parameter : n.a.
Namespace Definition : n.a.
Retrieval
Method : Retrieval
Adapter : DI API
Type : Service
Rule Document :
id : GeneralService
type : get
method : getByParams
tag : TestParams
keys : Code(Code)
Outbound Phase
Channel : OUT_B1
Type : SAP Business One
Format : DI Service
Regards
Vijay BarapatreHi All,
I have a UDO with one Table and Code and Name as fields, when I add data in SAP with the default screen I want to trigger it in B1IF, I have tried identifier 152, 153 and many more.
But my trigger keeps returning blank so it doesn't go through to my processes.
<?xml version="1.0" encoding="utf-8" ?>
- <Msg xmlns="urn:com.sap.b1i.vplatform:entity" xmlns:b1il="urn:com.sap.b1i.sim:b1ilog" xmlns:b1im="urn:com.sap.b1i.sim:b1imessage" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" MessageId="13102816541180273503C0A80079CC46" BeginTimeStamp="20131028165411" recording="true" logmsg="0009" msglogexcl="false" MessageLog="true">
- <Header>
<msglog step="Default message log" always="false" b1ifactive="true" />
- <Resumption>
<starter ipo="/vP.0010000119.in_BEAE/com.sap.b1i.vplatform.runtime/INB_B1_EVNT_ASYN_EVT/INB_B1_EVNT_ASYN_EVT.ipo/proc" />
</Resumption>
<IPO Id="INB_B1_EVNT_ASYN_EVT" tid="13102815571480273490C0A8007961AC" />
<Sender Id="0010000119" />
</Header>
- <Body>
- <Payload Role="T" Type="B1Event" add="">
- <Event xmlns="" B1EventFilter="false">
- <b1e:b1events xmlns:b1e="urn:com.sap.b1i.sim:b1event">
- <b1e:b1event>
<b1e:eventsource>MobiPay</b1e:eventsource>
<b1e:objecttype>FC_PODO</b1e:objecttype>
<b1e:transactiontype>A</b1e:transactiontype>
<b1e:usercode>manager</b1e:usercode>
<b1e:userid>manager</b1e:userid>
- <b1e:keys count="1">
- <b1e:key>
<b1e:name>Code</b1e:name>
<b1e:value>test 2</b1e:value>
</b1e:key>
</b1e:keys>
<b1e:sourcesite>BDRAPER</b1e:sourcesite>
<b1e:sourceport>1433</b1e:sourceport>
<b1e:sourcetype>6</b1e:sourcetype>
<b1e:sld value="BDRAPER!!MobiPay" />
</b1e:b1event>
</b1e:b1events>
- <b1ie:B1IEvent xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" SysId="0010000119" SysTypeId="B1.9.0" Task="I" LocalObjectType="FC_PODO">
- <b1ie:PrimaryKeyList>
<b1ie:PrimaryKey Key="Code" Value="test 2" />
</b1ie:PrimaryKeyList>
</b1ie:B1IEvent>
</Event>
</Payload>
<Payload Role="S" />
</Body>
</Msg>
Please help,
Regards,
Brenden Draper. -
What is the Object Type for User Define table ?
Dear All Experts,
I create one of the User Define Table with no. of UDF's
I already register User Define Table with Unique ID.
As per my knowledge, Unique ID is our Object type for that User Define Table.
I want to add Transaction Notification Code for created Used Define Table.
This Transaction Notification prevents user to must enter name in that form.
IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
BEGIN
If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del )
begin
SET @error = 1
SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Please help me for this problem.
Thanks & Regards,
Nishit MakadiaHi All,
Thanks for your replay.
Below code is working for User Define Table's Transaction Notification
IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
BEGIN
If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del)
begin
select @error = 10
select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Necessary to Remember 4 Things. That are mentioned below.
1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
4) Use error code as 10 Number
Thanks & Regards,
Nishit Makadia -
Approval Templates for the User Defined Object(UDO)
Hi,
I just wanted to check whether the Approval Templates for the User Defined Object(UDO)...i.e. Said to the User Defined Form..
if possibe how it can be done.....
Thanks in Advance,
With Regards,
MadhuSudhana Rao.GHi MadhuSudhana Rao,
The function you requested is not available yet.
Thanks,
Gordon -
Problen in ChooseFromList & User Defined Object
Hello.
I'm trying to use a [ChooseFromList] that calls info from one User Table called @LABS this table is MasterData type.
I add a User Defined Object in runtime, called UO_Labs
Then, I add one ChooseFromList to my form (This form was made in ScreenPainter)
The user object was created fine, the ChooseFromList is added fine, the form loads fine, but, when I press tab or the button of the ChooseFromList I get this error: "Internal error (-1003) ocurred [Message 131-183]"
I try to use my ChooseFromList in one Matrix and in one EditText objects. And gives me the same error in both objects.
I'm using SAP 2007 PL 35
This is my code:
Adding the User Defined Object -
Dim UO As SAPbobsCOM.UserObjectsMD
UO = CompanyObj.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserObjectsMD)
UO.ManageSeries = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanCancel = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanClose = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanDelete = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanFind = SAPbobsCOM.BoYesNoEnum.tYES
UO.CanLog = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanYearTransfer = SAPbobsCOM.BoYesNoEnum.tNO
UO.CanCreateDefaultForm = SAPbobsCOM.BoYesNoEnum.tYES
UO.Code = "UO_Labs"
UO.Name = "Laboratory Info."
UO.ObjectType = SAPbobsCOM.BoUDOObjType.boud_MasterData
UO.TableName = "LABS"
If UO.FormColumns.Count = 0 Then UO.FormColumns.Add()
UO.FormColumns.SonNumber = 0
UO.FormColumns.FormColumnAlias = "Code"
UO.FormColumns.FormColumnDescription = "Code"
UO.FormColumns.Add()
UO.FormColumns.SonNumber = 0
UO.FormColumns.FormColumnAlias = "Name"
UO.FormColumns.FormColumnDescription = "Name"
If UO.Add() <> 0 Then
Application.MessageBox(CompanyObj.GetLastErrorDescription)
End If
END Adding the User Defined Object -
This code adds my UDO and it works fine, has data and do the work.
Adding the [ChooseFromList] Object -
'// form object is send in parameters.
Dim oCFLs As SAPbouiCOM.ChooseFromListCollection = f.ChooseFromLists
Dim oCFL As SAPbouiCOM.ChooseFromList
Dim oCFL_CP As SAPbouiCOM.ChooseFromListCreationParams
Dim matrix As SAPbouiCOM.Matrix = form.Items.Item("matrix").Specific
oCFL_CP = App.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_ChooseFromListCreationParams)
oCFL_CP.MultiSelection = False
oCFL_CP.ObjectType = "UO_Labs"
oCFL_CP.UniqueID = "cfl_Labs"
oCFL = oCFLs.Add(oCFL_CP)
matrix.Columns.Item("labCode").ChooseFromListUID = "cfl_Labs"
matris.Columns.Item("labCode").ChooseFromListAlias = "Code"
form.Refresh()
END Adding the [ChooseFromList] Object -
Thanks for your time...
Greetings
Gabriel Vasquez.Hi Gabriel,
Please check in B1 if the UDO is created correctly, specifically the CanFind option. I got that error once, with one of my addons, that somehow was created with CanFind=tNo, despite my code indication CanFind=tYes...
Also, try adding the CFL directly in the XML form.
<column uid="C_labCod" type="116" title="Lab. Code" description="Laboratory Code" visible="1" AffectsFormMode="1" width="70" disp_desc="1" editable="1" right_just="0" val_on="Y" val_off="N" backcolor="-1" forecolor="-1" text_style="0" font_size="-1" ChooseFromListUID="cfl_Labs" ChooseFromListAlias="Code">
<databind databound="1" table="@LABS" alias="U_labCode"></databind>
<ExtendedObject linkedObject="" LinkedObjectType=""></ExtendedObject>
</column>
<ChooseFromListCollection>
<action type="add">
<ChooseFromList UniqueID="-1" ObjectType="-1" MultiSelection="0" IsSystem="1"></ChooseFromList>
<ChooseFromList UniqueID="cfl_Labs" ObjectType="UO_Labs" MultiSelection="0" IsSystem="0"></ChooseFromList>
</action>
</ChooseFromListCollection>
Also, it's a good practice to your SAP partner's NameSpace as prefix to UDOs, UDTs, UDFs and UDKeys, in order to avoid conflicts with other partner's add-ons.
Regards,
Vítor Vieira -
Add rows in User Defined Object
Hi all,
I've created a simple User Defined Object.
I have a Master Data table (with the fields code and name)
and a Master Data Line (with just on field itemCode)
I want to use my own form to fill the information. For that I created a form, with two edit text items (link to the field Code and Name) and a matrix with one column bounded to my table Master data Line
it works fine if I want to add data only in the master data table, witout related record in the master data line atble.
The probleme I have is to add more than one record in my matrix. When I try something like oMatrix.Addrow, it adds the rows in the matrix, but it doesn't update or add the data in the table
If I use the default form option for the UDO object, I can se that the related table is feeded in a second form, but I need to have the Master Data and the master data line in only one form.
I hope the explanation of my problem is understandable
Thanks for your help
SebastienI have the answer, the DBDatasources needs to be cleared :
oForm.DataSources.DBDataSources.Item("MyUserTable").Clear()
oMatrix.AddRow(1) -
I developed our own Authentication, Identity Assertion & Authorization providers
for weblogic 8.1 SP1. In the authenticator MBean i have one method which takes
user defined object as a argument and returns a user defined object. i am able
to call all the methods which takes java objects(for example: String, int, ArrayList,
HashMap, Etc...) as a argument and returns also a java object but when i user
any user defined object then it gives exception. if in the argument i used user
defined object then it is not able to call that method telling NoSuchMethodException.
Is there any way to use user defined object as an argument to MBean method?
can anyone please help us as we r in the final stage of the project?
Thanks
Lakshmi"Lakshmi Padhy" <[email protected]> wrote in message
news:3fc2f50c$[email protected]..
>
I developed our own Authentication, Identity Assertion & Authorizationproviders
for weblogic 8.1 SP1. In the authenticator MBean i have one method whichtakes
user defined object as a argument and returns a user defined object. i amable
to call all the methods which takes java objects(for example: String, int,ArrayList,
HashMap, Etc...) as a argument and returns also a java object but when iuser
any user defined object then it gives exception. if in the argument i useduser
defined object then it is not able to call that method tellingNoSuchMethodException.
>
Is there any way to use user defined object as an argument to MBeanmethod?
>
I seem to remember that jmx only supports scalar datatypes. Ask in the
weblogic.developer.interest.management newsgroup. -
Manual document number in User-Defined Object
Hi Experts,
I have a user-defined object of document type. I am trying to post a document using the General Service. However, I cannot assign manual document number. There is no handwritten property available. Is it possible to assign manual document number in user-defined objects using the DI API?
Thanks.
MelvinHi,
This issue has been resolved. For the benefit of those who will be encountering this error, it was resolved by manually assigning the Handwrtten field to 'Y'. Here is the code fragment:
shipmentHeader.SetProperty("Handwrtten", 'Y')'; -
DTW user-defined object issues
Dear all,
I've tried to import a user-defined object with a template through DTW.
However, I got an error message "To generate this document, first define the numbering series in the Administration moduleApplication-defined or object-defined error.
Any ideas?
Pls help.
ThanksHi,
It is a limitation of the UDO that it is not possible to enter new values via DI or DTW.
There is a way to automatically fill your object's user tables. Please see the Note [804685|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=804685] for more details regarding the issue description and the workaround available.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team
Maybe you are looking for
-
WiFi connection problem from HP Photosmart C4780 to MacBook Pro
I have an HP Photosmart C4780 that will not connection to my MacBook Pro. I am operating on the Mac OS X 10.6.8. It was working just fine when I was using my Apple Airport to project the WiFi in my house, but I recently bought a Apple Time Machine
-
I should get Infinity on 1st July, however...
With Infinity just about to arrive on my door step, I decided, once my Hub 5 arrived, to re-do my wiring from phone to hub to pc. My PC is up stairs. The only 'phone socket is in the lounge, downstairs. Before hand, I used to run a telephone cable up
-
DVCPRO sequence to Panasonic DVCPRO H1200 [missing] deck can't record IN
I have a Panasonic DVCPRO HD1200 tape deck and I am using DVCPRO 1080i/50 film. I have not many troubles getting footage from my DVCPRO tapes into FCP via Firewire, but I cannot get the sequence on the timeline to record back IN the tape deck as I ne
-
How can I get a copy of hp recovery disc's to re-install windows 7 home premium I have the ENVY laptop model # 15-1150NR product # WA843UA#ABA This question was solved. View Solution.
-
Accounting Documents and invoice
Dear All, My queries are as below. Hope everyone able to help / explain it to me. Thanks! 1)T-code for create MM invoices and generate ZG, ZH and ZZ accounting documnent? 2)T-code for create FI invoices and generate ZG, ZH and ZZ accounting docs? 3)W