Cfreturn variable return separate fields

I am creating a report in CF 10 report builder. I have a function that returns two separate fields in one variable I need to have the two fields returned separately, my output is an excel worksheet. Any advise will be greatly appreciated.

Cozmo2 wrote:
I am creating a report in CF 10 report builder. I have a function that returns two separate fields in one variable I need to have the two fields returned separately, my output is an excel worksheet. Any advise will be greatly appreciated.
A function can only return a singe value.
If you need two values you will need two functions or you will need to call the same function twice with a parameter indicating which value you want returned.

Similar Messages

File Sender, Content Conversion - how to define variable length last field?

XI 3.0 SP17
With a File Sender communication channel, that uses Content Conversion - how do I define a 'variable length' last field?
The scenario - the input file has four fields, of which the first three are a known fixed length, and the last (fourth, trailing) field is variable in length.
Using a Message Protocol of 'File Content Conversion', how do I define that last variable length field (field name 'WOData' below) in the Content Conversion Parameters section?
My current parameters are:
Recordset Structure - Row,*
ignoreRecordsetName - true
Row.fieldFixedLengths - 1,12,5,99999
Row.fieldNames - WOType,WONum,WOLine,WOData
I've tried the following for 'Row.fieldFixedLengths' to no avail -
'1,12,5,*'
'1,12,5,0'
'1,12,5,'
'1,12,5'
The last two were grasping at straws )
The only thing I've got to work is specifying a 'large' value for the final field (99999 above).
In addition, does anyone know if specifying a large value (e.g. 99999) for the final trailing field will give rise to performance issues when the file is being processed?
In the help for "Converting File Content in a Sender Adapter", it states -
<Begin Quote>
NameA.fieldFixedLengths
If you make a specification here, the system expects a character string that contains the lengths of the structure columns as arguments separated by commas.
If you also specify a separator for the columns, you must not add its length to the length of the columns.
This entry is mandatory if you have not made an entry for NameA.fieldSeparator.
<End Quote>
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

<< note that fieldFixedLengths will not take any wildcard entries like *. So in these case it is ideal to provide a maximum char length. But note that while the file is being created that many spaces will be created in your file !!! >>
Hi Shabarish,
Yes, no wildcard is the conclusion I came to, hence my maximum )
The message size did not increase by any 'blank padding'. When I look in [Message Display Tool (Detail Display)] 'Audit Log for Message: X' -
2006-10-17 18:22:42 Success Channel X: Entire file content converted to XML format
2006-10-17 18:22:42 Success Send binary file "X" from FTP server "X", size 103290 bytes with QoS EO
2006-10-17 18:22:42 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-10-17 18:22:42 Success Trying to put the message into the send queue.
2006-10-17 18:22:42 Success Message successfully put into the queue.
2006-10-17 18:22:42 Success The application sent the message asynchronously using connection AFW. Returning to application.
The input flat file in non-XML format was 92,132 bytes and the message payload into XI was 103,290 bytes.
My understanding is that trailing spaces are stripped from XML nodes.

What is the Function MOdule that returns the fields in database table order

Hello Folks
I have a dynamic internal table with fields ( which are not in order). I want to display them in the order of which they are present in the database table? Is there any function module that returns the fields in database order?
FAQ. Please search before posting your question.
Edited by: Suhas Saha on Oct 10, 2011 10:19 PM

Hi,
You can use this BAPI.
BAPI_SALESORDER_GETLIST
Reward if useful.
Regards,
Vimal

How to return all field names in a table

How do you write a report to return all field names in a table? I prefer the field names in a column.
Thanks
Wayne

Hi,
In Oracle it is,
Select column_name from user_tab_cols where table_name = 'Table_Name';
Note: Table_Name should be in capital letters
In MS SQL Server it is,
SELECT Column_Name + ', '
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Table_Name'
Hope this helps!
Thanks
-Azhar

Sending an Email with a cursor that returns multiple fields.

I was investigating about sending emails from apex, and I'd like to know if you can help me, I need to send an Email report with multiple fields, I m using this code :
DECLARE
CURSOR c1 is
select id,gk,creation_date,sr_count,issue_notes,sr_impacted,oldest_creation_date
from gk_report where id = (select max(id) from gk_report);
reg c1%ROWTYPE;
begin
IF (c1%ISOPEN = TRUE) THEN
CLOSE c1;
END IF;
OPEN c1;
FETCH c1 INTO reg;
CLOSE c1;
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => 'Hourly GK Log',
p_body_html =>
'GK: '||to_char(reg.gk)||' 
CREATION DATE: '||to_char(reg.CREATION_DATE,'DD-MON-YYYY HH24:MI:SS')||' 
SR COUNT: '||to_char(reg.SR_COUNT)||' 
ISSUE NOTES: '||to_char(reg.ISSUE_NOTES)||' 
SRs IMPACTED: '||to_char(reg.SR_IMPACTED)||' 
OLDEST CREATION DATE: '||to_char(reg.OLDEST_CREATION_DATE,'DD-MON-YYYY HH24:MI:SS'),
p_SUBJ => 'Hourly GK Log: ' || to_char(reg.CREATION_DATE,'DD-MON-YYYY HH24:MI:SS'),
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
end;
In this code there is a cursor that returns just one field, But what about if the cursor returns multiple fields, How can I insert a Loop into this code.?
Thanks,
Pablo.

Hi,
DECLARE
p_collection_name VARCHAR2(9000) := 'Report_collection';
begin
IF (apex_collection.collection_exists(p_collection_name => p_collection_name)) THEN
 apex_collection.delete_collection(p_collection_name => p_collection_name);
END IF;
apex_collection.create_collection_from_query(
 p_collection_name => 'Report_collection',
 p_query => 'SELECT DISTINCT AUD_SR AS SR, C.USER_NAME AS AUDITOR, F.ERROR_NAM , A.AUD_OBSERV AS AUDIT_OBS,D.FEEDBK_OBSERV AS FEEDBACK_OBS , E.ANALYSIS_OBS ,A.AUD_STATUS
FROM AUDIT_PROCESS A, MICC_AT_DATA B, MICC_AT_USER C, FEEDBACK_PROCESS D, MICC_AT_ANALISYS E, MICC_AT_ERROR F
WHERE B.DATA_MONTH = :P27_MONTH AND B.DATA_SR = A.AUD_SR AND C.ID = B.DATA_AUDITOR AND F.ERROR_ID = A.AUD_ERROR AND A.FEEDBACK_COD = D.FEEDBACK_COD AND D.FEEDBK_AGREE = 'N' AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR');
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => p_collection_name ,
p_body_html => '',
p_SUBJ => 'hi',
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
END;
Error
ORA-06550: line 18, column 176:
PLS-00103: Encountered the symbol " AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR" when expecting one of the following:
) , * & = - + < / > at in is mod remainder not rem
<> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
The symbol "," was substituted for " AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR" to continue.
1. DECLARE
2. p_collection_name VARCHAR2(9000) := 'Report_collection';
3. begin
I got out the 'N' quotes of the N :
DECLARE
p_collection_name VARCHAR2(9000) := 'Report_collection';
begin
IF (apex_collection.collection_exists(p_collection_name => p_collection_name)) THEN
 apex_collection.delete_collection(p_collection_name => p_collection_name);
END IF;
apex_collection.create_collection_from_query(
 p_collection_name => 'Report_collection',
 p_query => 'SELECT DISTINCT AUD_SR AS SR, C.USER_NAME AS AUDITOR, F.ERROR_NAM , A.AUD_OBSERV AS AUDIT_OBS,D.FEEDBK_OBSERV AS FEEDBACK_OBS , E.ANALYSIS_OBS ,A.AUD_STATUS
FROM AUDIT_PROCESS A, MICC_AT_DATA B, MICC_AT_USER C, FEEDBACK_PROCESS D, MICC_AT_ANALISYS E, MICC_AT_ERROR F
WHERE B.DATA_MONTH = :P27_MONTH AND B.DATA_SR = A.AUD_SR AND C.ID = B.DATA_AUDITOR AND F.ERROR_ID = A.AUD_ERROR AND A.FEEDBACK_COD = D.FEEDBACK_COD AND D.FEEDBK_AGREE = N AND E.COD_ANALYSIS = A.COD_ANALYSIS ORDER BY AUDITOR');
APEX_MAIL.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => p_collection_name ,
p_body_html => '',
p_SUBJ => 'hi',
p_cc => NULL,
p_bcc => NULL ,
p_replyto => NULL
END;
Error : ORA-20104: create_collection_from_query Error:ORA-20104: create_collection_from_query ParseErr:ORA-00904: "N": invalid identifier
If you can help me would be great, and if you see another mistake please let me know i have not may reach out the solution about it.
Thanks,
Pablo.

How do I get the datatype of a variable or a field in table?

Dear Friends,
In Pl/SQL, How do I determine the datatype of a variable or a field in a table?
While writing pl/sql code, I need to determine the datatype. Is there any option or function in pl/sql or in d2k.
waiting for your response...
Sanjai

write a function based on this code with column_name and table_name
as parameter and you get the data type as output.
SQL> create table mytable(empno number, ename varchar2(32))
2 /
Table created.
SQL>
SQL> set linesize 100
SQL> column table_name format a32
SQL> column data_type format a32
SQL>
SQL> select table_name, data_type
2    from user_tab_columns
3   where table_name='MYTABLE'
4 /
TABLE_NAME                       DATA_TYPE
MYTABLE                          NUMBER
MYTABLE                          VARCHAR2

Change "Return-From" field in mail.app messages

I need to be able to change the "Return-From" field in some of my outbound emails using the mail.app. I can't find a way to do this. Can anyone help? Here is what I am basically trying to accomplish:
I need recipients of the email to be able to select Reply and have the email come back to the same email address as the From field, but if they have an out of office turned on, or if the email is no longer a valid email address, I need those messages to go to a different email box so they don't clutter up the real messages that need to be worked.
Any suggestions or ideas are appreciated.

You can add any headers you want to Mail, with the defaults write com.apple.mail UserHeaders command in Terminal. However, it is easy to get it wrong, particularly if you already have added headers, so I would suggest you try Cricket's Applescripts for Mail, which includes one for doing it.
That said, is there a Return-From header? I cannot recall having noticed one.
AK

Displaying variable no. of fields for different records

Hi,
I have the requirement of displaying variable no of fields for different type of record in the business object.How can this be done in VC. For example i have to show an extra field for country "IN"
Thanks in advance,
Regards,
Anupam

Hi Anupam,
Please explain ur requirement more clearly.
If understanding is right ,you are creating a Table/Form with the information of a particular company ,and u r interested to add another column to this table and this column should not be visible when to select another company. Am I right?
What is the data source is it a BAPI or Query or Query View?
1)Drag and drop a table from the Query(if suppose).Or form if u want to include in the form.
2)And if u want another field(if it is to be calculated) in ur table u can have include an expression box by clicking a "+" sign in the table and specify the formula for it in the Expression field uder the Data source field in the General Tab.
3)And if u want to hide this field when u select another country then u can set a visibility condition.
4)Go to control properties window of the new field.U can get this by selecting the new added field and by clicking on configure or by left clicking the new field and then selecting the properties.
5)Inside the General Tab, u have UI Control,below that u have Hidden which is a check box, just check it.And click on condition. Then type the condition for it to be hidden.Then it is hidden.
Please try doing the above.
Reward me with points if its helpful.
Thanks,Regards,
Sripriya Srinivasan.

How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

You have to use custom JavScripting to concatenate the first 2 fields. You cannot use the first 2 calculation options because they force the values of the fields to a numeric value or ignore string values.
Possible scripts for the 3rd field are:
event.value = this.getField("Text1").valueAsString + " " + this.getField("Text2").valueAsString;
or
event.value = this.getField("Text1").valueAsString.concat( " ", this.getField("Text2").valueAsString);
If you do not want change the separator or not show the separator when on or the other field is empty, you will need to add more code to adjust for change.
The above scripts will also concatenate number because the field values are read as strings and not numbers.
There is also a generalized user written function to concatenate up to 3 fields with a separator that adjust for missing data.

How to convert the table with separate fields for every period

Hi there,
I have the table in R/3 called COSP. The table contains the separate fields for values of separate reporting periods, let's say Amount01, Amount02 etc. I need to extract this data to BW and load it into ODS, which contains the data like common key figure for amount and info object Fiscal Period. How to extract and tansform the data to be able to load it there?
I mean, how to change the row like:
100 100 200 200....
for rows like:
001 100
002 100
003 200
004 200
I hope you'll help,
Kooyot

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

Selection Wizard problem - element variable returns container

Hello,
I am quite new to Sirius and I am trying to create my representations for an existing ecore model.
I am not sure I completely understood the behavior of the Selection Wizard, and Pane Based Selection Wizard tools. How can I access the elements that have been selected by the user? From my understanding they are in the 'element' variable.
However, in my setup such variable returns the element on which the user ran the tool (the one he clicked on), rather than the selected elements. Is this the intended behavior? If yes, where can I find the list of elements selected by the user?
Thanks,
Leonardo.

Hi Leonardo,
Le 24/02/2015 14:59, Leonardo Montecchi a écrit :
> Hi Maxime,
>
> Maxime Porhel wrote on Thu, 19 February 2015 03:58
>> The element variable (child of the Selection Wizard / Pane Based
>> Selection Wizard) and available for the model operation you will add
>> to specify the behavior of the tools will reference the selected
>> elements. It will be a Collection if the tool is a Pane Based
>> Selection Wizard or a Selection Wizard with Multiple set to true and
>> and a single EObject if the tool it a Selection Wizard with Multiple
>> set to false (General tab in the properties view when a Selection
>> Wizard is selected).
>>
>> Note that you can rename this variable (and all variables displayed as
>> children of the tools).
>
>
> Thank you for your answer. It is working now. I was accessing the
> variable directly, I did not realize that it was a collection.
> From the documentation I understood that the definition of the tool
> would be executed N times, each time with the i-th element from the
> selected elements as context. That is my fault probably! However a
> sentence that the variable can be a collection may clarify.
> [/quote]
>
> Maxime Porhel wrote on Thu, 19 February 2015 03:58
>> You should have the selected element. I tried on a simple VSM with a
>> SelectionWizard and a PaneBaedSelectionWizard and in the model
>> operations I get the element(s) selected in the wizard as value of the
>> element variable.
>
>
> Actually using the collection variable directly as context was returning
> return the container elmement. For example, adding a "Set" expression to
> set the name of the object, would change the name of the container
> element. I am not sure this is the expected behavior.
If the result of the browse expression of a Change Context is a
collection, it will do nothing and the context will still be the same as
before the operation.
If you use a Selectin/PaneBased selection wizard with multiple=true and
want to place the context on the selection which will be a collection,
you have to use a For operation and use var:element as expression for
example. Then you have to put the Set operation as child of the For element.
>
>
>
> It was something like:
>
> changecontext(element)
> set(name) = 'Test'
>
> After executing this the name of the object on whith the pane based
> selection tool was applied was changed to 'Test'.
>
> Thanks,
> Regards,
> Leonardo.
>
>
Regards
Maxime - Obeo
Need professional services for Sirius?
http://www.obeodesigner.com/sirius

Bpel variables return Http 503 (problem building schema) error

First of all if I have posted this in the wrong forum, I apologise in advance.
I have recently installed the Oracle SOA suite and I have downloaded JDeveloper 10.1.3.3, I am running the (http://download.oracle.com/otndocs/products/bpel/orderbooking.pdf) Oracle® BPEL Process Manager Tutorial and when attempting to create a copy rule I have noticed that some of my variables return the following error:
Exception - Problem building schema
expanded error:
Exception: Server returned HTTP response code: 503 for URL: http://MYID.MYDOMAIN.com:80/orabpel/default/CreditRatingService/CreditRatingService?wsdl
I can access the WSDL directly and it is visible in my Bpel console window too, yet JDeveloper seems to be having trouble with it. I have setup an integration server connection to the BPEL server and from there, when I attempt to validate WSDL I don't get any problems.
I was wondering if anyone could help as this has got me stuck and I can't continue any further.
Edited by: Saheem on Jun 8, 2009 3:33 PM

Disable the proxy settings in JDeveloper.
Marc

Local variable hides a field

hi everyone ,
i am creating a button but it will show that local variable hides a field . this not an error or warning
JRadioButton a1Btn = new JRadioButton("Physical connectivity");
a1Btn.addActionListener(this) ;here a1Btn shows local variable hides a field.

Correct, it is not an error to have a local variable with the same name as a field of the class.
IDE's such as Eclipse often have options that will flag such name shadowing as a warning, so you'll know when you accidentally do this.
But note that you can always access the class's field by prepending "this.", for example, "this.a1Btn".

LOVs again! How to return multiple fields to calling form

Hi
Newbie question, any help GREATLY appreciated :)
Is there a simple and easy way to return more than one field from a LOV.
I need this as I have a composite fk comprised of 2 fields, and as such need to return 2 fields from the LOV to the calling form.
(My environment: JDeveloper 9.0.5.2 build 1618)
CM

Thanks, you put me on the right track here. Further investigations show the following sample provided by OTN shows how to use both the session request/response values or a JavaBean to do this:
http://www.oracle.com/technology/sample_code/products/jdev/10g/ADF_UIX_UserInput.zip
As such I post my solution to my original post. Hopefully it's useful to someone beside myself. I have to write up my notes anyhow so it's no fuss to submit them to the forum. I must admit I'm a newbie and slightly demented Forms programmer so such solutions aren't so obvious to me. With this in mind please include the "standard disclaimer" here, with the addition "mileage may vary" warranty.
For these notes I've used the "HR" demo Oracle schema. In particular the tables departments and employees. As you know there is a master-detail relationship between these 2 tables, where each department may have one or more employees.
We have the requirement on a webpage to:
1) Provide an input-form-with-navigation to edit the employees.
2) Display the relating department_name field, rather than just showing the department_id which is meaningless to the user. For example if the employees.department_id = 40, we wish to show the department name "Human Resources" on the employees record.
3) Provide a LOV for the department ID field to allow the user to change the underlying department_id to a different master departments record.
4) Update 2) given a change via 3).
To do this do the following:
Entity Objects
1) Create default EO/VOs on both tables.
2) In the employees EO, create a new field "DepartmentName" to represent the derived department name field.
3) Set the new EO attribute's selected-in-query field.
4) In the query-column-expression field, enter a query to derive the department name field for each record in the detail-employees-EO.
eg. (SELECT dpt.department_name FROM departments dpt WHERE dpt.department_id = employees.department_id)
Ensure to include the brackets.
5) Apply the changes and accept the warning to create default data-type settings for the new attribute.
View Object
6) In the employees VO, include the new field DepartmentName as a selected attribute from the EO.
7) Apply the changes and accept the warning to create default data-type settings for the new attribute.
8) Test the model by running the ADF BC tester. Once running select the employees VO and step through the records, making sure the DepartmentName field has a value and changes appropriately according to the relating parent department_id.
UIX input-only-form
9) Create a new UIX web page employeesEdit.
10) From the data-control pallete, drag in the employees VO as an input-form-with-navigation.
11) For testing purposes it is also useful to have a create, delete, commit and rollback button, so includes these too.
12) Within the employees VO data-control, also drag across a messageLovInput for the DepartmentId. Position it under the existing DepartmentId messageTextInput within the UIX page. We'll remove the existing messageTextInput later, but it's useful to leave it in for testing purposes initially when the LOV returns values.
UIX LOV
13) Navigate to the default LOV page that has just been created for you.
14) Within the data-control pallete, expand the departments VO, select department ID then LOV-table from the drop-down, and drag this item onto the LOV page.
15) Save your changes.
16) Run your application. For an existing employee, invoke the department LOV and select an alternative department. Note on returning to the employees page the DepartmentID (both the messageTextInput and messageLovInput fields) are updated, but the DepartmentName is not. To do this we need to create a JavaBean to return multiple fields from the LOV to the original form.
JavaBean
17) Within your ViewController project, expand the ApplicationSources-View node.
18) Select the new button, and create a standard JavaBean.
19) Name the bean DepartmentsLov.
20) Via the class editor, add 2 private scope fields DepartmentId and DepartmentName with String data-types, ensuring the create get/set method checkboxes are checked.
21) Make and save your changes.
22) From the navigator drag the newly created java file into the data-control palette.
UIX LOV
23) Return to the LOV webpage.
24) Your LOV page will have a lovSelect event handler something like the following:
<event name="lovSelect">
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
25) Change the lovSelect as follows:
<event name="lovSelect">
<compound>
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
<set value="${bindings.DepartmentId.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentId}"/>
<set value="${bindings.DepartmentName.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentName}"/>
</compound>
26) Within the UI model navigator, right-click on the top node, then create-binding, input, text field.
27) Select the AppModuleDataControl, then DepartmentView, then the DepartmentName field, and then the ok button.
28) In the UI model select the new field, then in the structure pane rename the field to DepartmentName.
29) Within the UI model navigator, right-click on the top node, then create-binding, data, iterator.
30) Select the DepartmentsLovDataControl and name the new iterator DepartmentsJavaBeanIterator.
31) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
32) Select the DepartmentsLovDataControl then departmentId field, then the ok button.
33) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentId.
34) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
35) Select the DepartmentsLovDataControl then departmentName field, then the ok button.
36) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentName.
UIX input-only-form
37) Return to the main employeesEdit UIX form.
38) Your UIX page will have a lovUpdate event handler something like the following:
<event name="lovUpdate">
<null/>
39) Change the lovUpdate as follows:
<event name="lovUpdate">
<compound>
<set value="${bindings.JavaBeanDepartmentId.inputValue}"
property="inputValue"
target="${bindings.DepartmentId}"/>
<set value="${bindings.JavaBeanDepartmentName.inputValue}"
property="inputValue"
target="${bindings.DepartmentName}"/>
</compound>
</event>
40) Repeat steps 29 through 36 for this page.
41) Within the UIX page find the entries for the departmentId LOV, and the DepartmentName. They should look something like the following:
<messageLovInput id="${bindings.DepartmentId.path}"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"/>
<messageTextInput model="${bindings.DepartmentName}"
columns="10"/>
42) Modify these 2 entries as follows:
<messageLovInput id="DepartmentId"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"
partialRenderMode="multiple"
partialTargets="DepartmentId DepartmentName"/>
<messageTextInput id="DepartmentName"
model="${bindings.DepartmentName}"
columns="10"/>
43) Finally delete the original DepartmentId messageTextInput field, leaving the DepartmentId messageLovInput.
Testing
44) Open your UIX input-only-form.
45) Call the LOV and change the department for an existing employee record.
46) Return to the employees page and note that the department ID and name have changed.
47) Commit your changes.
48) With your favourite data inspection tool (a'la Toad), check that the employee record's department ID has been appropriately saved to the database.
<The End>
Phew!

How to return all fields when updating?

When I update a lead, it only returns fields that are modified but not all fields in the XML.
I noticed the LeadID and LeadFullname values are still being returned when updating which is good.
How can I make it so it will return ALL fields that have values and not just the modified ones when updating?
Thanks

I have to query it after getting it back from the queue.

Cfreturn variable return separate fields

Similar Messages

Maybe you are looking for