How to return all fields when updating?

When I update a lead, it only returns fields that are modified but not all fields in the XML.
I noticed the LeadID and LeadFullname values are still being returned when updating which is good.
How can I make it so it will return ALL fields that have values and not just the modified ones when updating?
Thanks

I have to query it after getting it back from the queue.

Similar Messages

How to return all field names in a table

How do you write a report to return all field names in a table? I prefer the field names in a column.
Thanks
Wayne

Hi,
In Oracle it is,
Select column_name from user_tab_cols where table_name = 'Table_Name';
Note: Table_Name should be in capital letters
In MS SQL Server it is,
SELECT Column_Name + ', '
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Table_Name'
Hope this helps!
Thanks
-Azhar

Workflow - How to configure to send all fields when updating

Record type: Lead
Workflow trigger: When modified record saved
Workflow action: Create integration event
Only modified fields are in the XML file. How can I make it so it will pass all fields that have values and not just modified ones?
Thanks

I have to query it after getting it back from the queue.

How to show all fields when we do not enter any data

Hello all,
Here i am creating the SSRS reports on SharePoint list data, Report is created successfully but the requirement is that when generation of report if i do not enter value of employee name that time .....I want the report must display all records of all employees.
Please suggest me....

Hi Anil,
If I understand correctly, you have create a report use SharePoint list as the datasource. When you run the report, you need to enter value of employee name to display corresponding values.
If we are use SharePoint list as datasource, we have two method to add parameter in the report.
Method1: Add filter in the dataset Query Designer dialog box.
In this situation, if we configure the filter with “(blank)” in the Value dialog box, we will get the situation as your post. In this method, we are get a single value parameter in the report.
Method2: Add a dataset parameter. Please refer to the steps below:
Create another dataset (DataSet2) in the report with EmployeeName field.
Add a parameter (ReportParameter1) in the report. Select “Allow multiple values” option in the General dialog box.
Click “Available Values” in the left pane, select “Get values from a query”. Please refer to the values below:
Dataset:     DataSet2
Value field:    EmployeeName
Label field:    EmployeeName
Click “Default Values” in the left pane, select “Get values from a query”. Please refer to the values below:
Dataset:     DataSet2
Value field:    EmployeeName
Right click DataSet1, select DtaSet Properties. Click Filters in the left pane. Please refer to the values below:
Expression:   [EmployeeName]
Operator:    In
Value:   [@ReportParameter1]
Reference: http://msdn.microsoft.com/en-us/library/dd220464.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

How to return all columns starting with E?

How to return all columns starting with E in emp table?
My attempts (below) were unsuccessful.
SQL> SELECT E* from emp;
SELECT E* from emp
ERROR at line 1:
ORA-00936: missing expression
SQL> SELECT E.* FROM EMP;
SELECT E.* FROM EMP
ERROR at line 1:
ORA-00904: "E": invalid identifier
SQL> SELECT EMP.E* FROM EMP;
SELECT EMP.E* FROM EMP
ERROR at line 1:
ORA-00936: missing expression

You need to do it dynamically:
SQL> var cur refcursor
SQL> declare
co varchar2(40);
begin
for c in (select column_name from cols where table_name = 'EMP' and column_name like 'E%') loop
    co := co || c.column_name || ',';
end loop;
open :cur for 'select '|| rtrim(co,',') || ' from emp';
end;
PL/SQL procedure successfully completed.
SQL> print cur
     EMPNO ENAME
      7369 SMITH
      7499 ALLEN
      7521 WARD
      7566 JONES
      7654 MARTIN
      7698 BLAKE
      7782 CLARK
      7788 SCOTT
      7839 KING
      7844 TURNER
      7876 ADAMS
      7900 JAMES
      7902 FORD
      7934 MILLER
14 rows selected.

LOVs again! How to return multiple fields to calling form

Hi
Newbie question, any help GREATLY appreciated :)
Is there a simple and easy way to return more than one field from a LOV.
I need this as I have a composite fk comprised of 2 fields, and as such need to return 2 fields from the LOV to the calling form.
(My environment: JDeveloper 9.0.5.2 build 1618)
CM

Thanks, you put me on the right track here. Further investigations show the following sample provided by OTN shows how to use both the session request/response values or a JavaBean to do this:
http://www.oracle.com/technology/sample_code/products/jdev/10g/ADF_UIX_UserInput.zip
As such I post my solution to my original post. Hopefully it's useful to someone beside myself. I have to write up my notes anyhow so it's no fuss to submit them to the forum. I must admit I'm a newbie and slightly demented Forms programmer so such solutions aren't so obvious to me. With this in mind please include the "standard disclaimer" here, with the addition "mileage may vary" warranty.
For these notes I've used the "HR" demo Oracle schema. In particular the tables departments and employees. As you know there is a master-detail relationship between these 2 tables, where each department may have one or more employees.
We have the requirement on a webpage to:
1) Provide an input-form-with-navigation to edit the employees.
2) Display the relating department_name field, rather than just showing the department_id which is meaningless to the user. For example if the employees.department_id = 40, we wish to show the department name "Human Resources" on the employees record.
3) Provide a LOV for the department ID field to allow the user to change the underlying department_id to a different master departments record.
4) Update 2) given a change via 3).
To do this do the following:
Entity Objects
1) Create default EO/VOs on both tables.
2) In the employees EO, create a new field "DepartmentName" to represent the derived department name field.
3) Set the new EO attribute's selected-in-query field.
4) In the query-column-expression field, enter a query to derive the department name field for each record in the detail-employees-EO.
eg. (SELECT dpt.department_name FROM departments dpt WHERE dpt.department_id = employees.department_id)
Ensure to include the brackets.
5) Apply the changes and accept the warning to create default data-type settings for the new attribute.
View Object
6) In the employees VO, include the new field DepartmentName as a selected attribute from the EO.
7) Apply the changes and accept the warning to create default data-type settings for the new attribute.
8) Test the model by running the ADF BC tester. Once running select the employees VO and step through the records, making sure the DepartmentName field has a value and changes appropriately according to the relating parent department_id.
UIX input-only-form
9) Create a new UIX web page employeesEdit.
10) From the data-control pallete, drag in the employees VO as an input-form-with-navigation.
11) For testing purposes it is also useful to have a create, delete, commit and rollback button, so includes these too.
12) Within the employees VO data-control, also drag across a messageLovInput for the DepartmentId. Position it under the existing DepartmentId messageTextInput within the UIX page. We'll remove the existing messageTextInput later, but it's useful to leave it in for testing purposes initially when the LOV returns values.
UIX LOV
13) Navigate to the default LOV page that has just been created for you.
14) Within the data-control pallete, expand the departments VO, select department ID then LOV-table from the drop-down, and drag this item onto the LOV page.
15) Save your changes.
16) Run your application. For an existing employee, invoke the department LOV and select an alternative department. Note on returning to the employees page the DepartmentID (both the messageTextInput and messageLovInput fields) are updated, but the DepartmentName is not. To do this we need to create a JavaBean to return multiple fields from the LOV to the original form.
JavaBean
17) Within your ViewController project, expand the ApplicationSources-View node.
18) Select the new button, and create a standard JavaBean.
19) Name the bean DepartmentsLov.
20) Via the class editor, add 2 private scope fields DepartmentId and DepartmentName with String data-types, ensuring the create get/set method checkboxes are checked.
21) Make and save your changes.
22) From the navigator drag the newly created java file into the data-control palette.
UIX LOV
23) Return to the LOV webpage.
24) Your LOV page will have a lovSelect event handler something like the following:
<event name="lovSelect">
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
25) Change the lovSelect as follows:
<event name="lovSelect">
<compound>
<set property="inputValue"
value="${bindings.DepartmentId.inputValue}"
target="${data.employeesEdit.DepartmentId}"/>
<set value="${bindings.DepartmentId.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentId}"/>
<set value="${bindings.DepartmentName.inputValue}"
property="inputValue"
target="${bindings.JavaBeanDepartmentName}"/>
</compound>
26) Within the UI model navigator, right-click on the top node, then create-binding, input, text field.
27) Select the AppModuleDataControl, then DepartmentView, then the DepartmentName field, and then the ok button.
28) In the UI model select the new field, then in the structure pane rename the field to DepartmentName.
29) Within the UI model navigator, right-click on the top node, then create-binding, data, iterator.
30) Select the DepartmentsLovDataControl and name the new iterator DepartmentsJavaBeanIterator.
31) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
32) Select the DepartmentsLovDataControl then departmentId field, then the ok button.
33) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentId.
34) Again in the UI model navigator, right-click on the top node, then create-binding, input, text field.
35) Select the DepartmentsLovDataControl then departmentName field, then the ok button.
36) In the UI model select the new field, then in the structure pane rename the field to JavaBeanDepartmentName.
UIX input-only-form
37) Return to the main employeesEdit UIX form.
38) Your UIX page will have a lovUpdate event handler something like the following:
<event name="lovUpdate">
<null/>
39) Change the lovUpdate as follows:
<event name="lovUpdate">
<compound>
<set value="${bindings.JavaBeanDepartmentId.inputValue}"
property="inputValue"
target="${bindings.DepartmentId}"/>
<set value="${bindings.JavaBeanDepartmentName.inputValue}"
property="inputValue"
target="${bindings.DepartmentName}"/>
</compound>
</event>
40) Repeat steps 29 through 36 for this page.
41) Within the UIX page find the entries for the departmentId LOV, and the DepartmentName. They should look something like the following:
<messageLovInput id="${bindings.DepartmentId.path}"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"/>
<messageTextInput model="${bindings.DepartmentName}"
columns="10"/>
42) Modify these 2 entries as follows:
<messageLovInput id="DepartmentId"
model="${bindings.DepartmentId}"
destination="lovWindow1.uix"
partialRenderMode="multiple"
partialTargets="DepartmentId DepartmentName"/>
<messageTextInput id="DepartmentName"
model="${bindings.DepartmentName}"
columns="10"/>
43) Finally delete the original DepartmentId messageTextInput field, leaving the DepartmentId messageLovInput.
Testing
44) Open your UIX input-only-form.
45) Call the LOV and change the department for an existing employee record.
46) Return to the employees page and note that the department ID and name have changed.
47) Commit your changes.
48) With your favourite data inspection tool (a'la Toad), check that the employee record's department ID has been appropriately saved to the database.
<The End>
Phew!

How can I hide fields when printing?

On a form I have created for our field staff, we have many conditions of what options will show based on different selections on the form. When printing their responses, the entire form prints, even with items that have nothing to do with the selection as they were hidden from the person filling out the form. How do I hide/ suppress these blank fields?

Hi,
Thanks for asking. FormsCentral currently only support hide fields in html form, not pdf form. So printing from a pdf form would show all fields.
Regards,
Perry

How to enable all fields in DTP Semantic Group....

Hi
In BI, for one of my Master Bearing Infoobjects DTP-> Semantic Group is enabled for all fields. But for 2nd master bearing infoobject, only its primary keys are enabled & non-primary keys r disabled in its semantic group. Even both structure have same DTP settings and both have data.
Could u pls. let me know why is it so & how can i enable all fields in semantic group.
Thanks...

Hi Harpal,
What are your target and source objects?
Take a look to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Choose This graphic is explained in the accompanying text Semantic Groups to specify
how you want to build the data packages that are read from the source (DataSource or
InfoProvider). To do this, define key fields. Data records that have the same key
are combined in a single data package.
This setting is only relevant for DataStore objects with data fields that are
overwritten. This setting also defines the key fields for the error stack.
By defining the key for the error stack, you ensure that the data can
be updated in the target in the correct order once the incorrect data
records have been corrected.
Regards, Federico

Lost all data when updating iPod Touch

I've managed to update my iPod software and after it was updated, all the music files disappear except for the apps. I did the restore option and it erase ALL of data inside which irritates me greatly. Now, the music and the apps are gone. I want to know how to restore all the music and apps that I have before the update. i noticed that when I update the software, it ask me to backup and so I did. However, I cannot seem to know how to execute this kind of backup.
Any help would be appreciated.

I'm not sure if that will work, iTunes have already exported my music library and the music contained inside the iPod isn't located inside this computer. So it should means that iTunes will sync the music library, not from the lost data. This situation stands at updating my iPod this morning and it eradicated all the previous music data it have inside, I've tried to restore from backup but only able to restore on two time periods.
Message was edited by: Apple2011

How to clear all data when the form loading at the first time

hi
I am using JDevloper 10g and I have adfForm page, I want to clear all data when I load the page for the first time.
When I did it using RefreshCondition on the pageDef in the executables like(
<executables>
<iterator id="FinCompaniesInformaton1ViewIterator" RangeSize="10"
Binds="FinCompaniesInformaton1View"
DataControl="AppModuleDataControl" *RefreshCondition="#{adfFacesContext.postback==true}"* />
</executables>
the form didn't bring any data but the problem is the field in the form at the run time changed to read only. So how to make it inputText and clear the data inside it at the run time
best regards
Tarek Al Soudani

thank you for your help,my spec is I have ADF Form and I have creat and Edit CommandButton I made it befor also Commite to save.
so when I run the form the Field should be disabled and there are no data inside it,and when I chose the creat button the fields should be enabled and I have to insert data inside it then I save.
So I have FinCompaniesInformatonView as view object based on entity object name FinCompaniesInformaton and applicationMoudul.
I tolde you befor that I made refreshcondition to solve the data clearence problem but the field changed to read only so please if you now any way to leave the fields as inputText whitout make the form as creation form
beast regards

URGENT : Return all rows when parameters null

Hi !
I have a simple question for you guys.
I have some problems creating an SQL.
Effectively, I want to be able to return all the rows of a table when my parameters are null.
Here is an example of what I'm saying.
SELECT COPY_TRANSACTION.DATE_TRANSACTION,
       COPY_TRANSACTION.CODE_NT,
       COPY_TRANSACTION.NOM_GROUPE,
       COPY_TRANSACTION.NOM_PROVENANCE,
       COPY_TRANSACTION.NOM_SUJET,
       COPY_TRANSACTION.NOM_ACTION,
       COPY_TRANSACTION.NOM_SOURCE,
       COPY_TRANSACTION.NOM_SYSTEME,
       COPY_TRANSACTION.VOLUME
FROM GESTACHE_OWNER.COPY_TRANSACTION COPY_TRANSACTION
WHERE (COPY_TRANSACTION.DATE_TRANSACTION Between ? And ?)
      AND (COPY_TRANSACTION.PEIN_CREATION=?)
      AND (COPY_TRANSACTION.CODE_NT In (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)
      AND )I want that when ? is null, every data of my table will be selected.
Anyone can help me ??

Not pretty but you could try:
SELECT CT.DATE_TRANSACTION,
       CT.CODE_NT,
       CT.NOM_GROUPE,
       CT.NOM_PROVENANCE,
       CT.NOM_SUJET,
       CT.NOM_ACTION,
       CT.NOM_SOURCE,
       CT.NOM_SYSTEME,
       CT.VOLUME
FROM GESTACHE_OWNER.COPY_TRANSACTION CT
WHERE (   (    ?1 is null
            and ?2 is null
            and ?n is null)
        or (    CT.DATE_TRANSACTION Between ?1 And ?2
            AND CT.PEIN_CREATION=?3
            AND CT.CODE_NT In (?4,?5,?6,?7,?8,...?n)
            AND )How is this being called - a procedure, script, form? Depending on the use it might be beter to have 2 queries - one for NULL parameters, and one for the non-NULL parameters

In background how to display all fields using reuse_alv_list_display

Hi all,
        I have output table with 100 fields,when i ran in background its giving the output with out alignments,how to make the whole record in a single line,presently it displays each record in a 3 rows,please help me
thanks
Sriman

Hi,
   In fore ground it displaying all columns but when i ran in background its giving all fields but the each record contains rows,i need to make it as single line
the code i have written for this is.
for background is there any parameter to add for this code.help me
ls_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = repid
      it_fieldcat        = it_fieldcat
     it_events          = events_b
      is_layout          = ls_layout
    it_events          = it_events
        is_print           = ls_print
      i_save             = 'X'
    TABLES
      t_outtab           = t_ce1jab1.
thanks
sriman

How to retrieve all fields from Entiy Bean

Is there a simpler way to retrieve all fields from the entity bean than calling each individual get method?
I need to retrieve the entire record not the contents of the entire table.
Though, I may eventually need to do that also.
I have 56 fields on this table. It does not make sense to code a get statement for every field.
If you can direct me to sample code that would be good.
Also, are there any good examples out there of how to create an entity bean or session bean using a local interface?
Thanks,
Jim

I think you are confusing an EJB with a DAO.
If you want to access the database why not just use JDBC?

How to return all fields when updating?

Similar Messages

Maybe you are looking for