Change Bubble Location in Know It mode
Does anyone know how to change the default bubble location for instruction text in Know It mode? Currently, the Bubble defaults to the middle right-hand side of the screen, which covers up a portion of the screen shot. I would like to move the bubble to appear at the top right corner of the screen.
Is there way to change the bubble location for individual frames and/or for the entire recording?
Thanks!
Hi Darkxceed
My recommendation for doing a HAL i TestStand would be to use an object oriented approach.
Create a class hirachy of your instruments like the following inside of LabVIEW:
Then use Dynamic Dispatch to make TestStand choose the instrument of interest. There is an example of using Dynamic Dispatching in TestStand here:
TestStand Using LabVIEW OOP Truck Example
https://decibel.ni.com/content/docs/DOC-24098
This solution will offcourse require you to read up on creating applications using object oriented programming in LabVIEW. We at NI have a course that walks you through both the theory and practical implementation. It is called Object Oriented Programming in LabVIEW. If you have a SSP agreement, you should be able to find it as Self Paced Online Training as a part of your contract.
There is also a good introduction to OOP in LabVIEW and HAL here:
https://decibel.ni.com/content/docs/DOC-32506
(There is a video embedded in the PDF)
Best Regards
Anders Rohde | CLD | Platinum Applications Engineer | National Instruments Denmark
Similar Messages
-
Like an idiot I changed the location of my iTunes Media File in the Advanced section of my Preferences - now half my songs won't play as they can't be found....I know they are there as I played these songs yesterday.....help !!!....
.....what folder do I need to reset it to so I can play my entire library??
Frankie CYou can also reset the location fo the media folder in the advanced tab.
-
I Have iTunes since 2008. I have changed computers and I know have old libraries in my Hard Disk but iTunes do not locate a lot of songs when I try to play it. How can I correct this situation?
When iTunes say that try to find the file you want iTunes to play in your iTunes > Media folder. If iTunes offers to find others, let it. If it does not find them all you will have to find them yourself or re-add the files from your drive to iTunes (use Automatically Add to iTunes folder).
iTunes 9: Understanding the "Automatically Add to iTunes" folder. - http://support.apple.com/kb/HT3832 - Files put into this folder are actually moved from this folder onto the correct location in the iTunes Media folder. -
Changing the location of archive log from flash recovery area PLZ HELP!!!
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMuser10243788 wrote:
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMPointing the archive log dest (and/or the FRA) to a new location, or enlarging them, will do no good if you are not performing regular housekeeping on the archivelogs. You will just keep knocking down the same problem over and over.
If you simply delete the archivelogs at the OS level, the database will never know about it and it will continue to think the destination is full, based on records kept in the control file.
For regular housekeeping, you need to be doing something similar to this in rman:
run {
backup archivelog all not backed up 1 times tag='bkup_vlnxora1_arch';
delete noprompt archivelog all backed up 1 times to device type disk;
run {
delete noprompt obsolete;
crosscheck archivelog all;
delete noprompt expired archivelog all; -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How to change file location path at run time in OWB 10g
Hello all,
We want to load several files with the same name but from different folders into a single table.
The information about the paths is stored in an oracle table.
Is there any best practice to achieve this?
Our approach is to loop on the number of sources and execute the mapping after changing the location path. We found how to make the loop, and have the apropriate OMB command to update the location path, but we are still looking for a way to call this OMB plus command in a process flow or a mapping. Any idea?
We also succeeded in loading the file from an unregistered location, which is necessary to be able to update the path, but I'm not sure this is really the best approach. Any advise?
Thanks in advance for your help!
best regards
Cedric.Hi,
I can provide you with an idea on this, dont know if it will work or not.
Suppose, you need to load 5 files in different folder locations into a single table. Call the mapping 5 times in a process flow. If you log in to the database, and go the table all_directories in your target schema, you will find an entry for the actual path of the file you are trying to laod. I think if this path is updated before each run of the mapping, you can load all files into the target table. Only thing you have to do is call a procedure which will update this record in all_directories table with the different locations each time you want and then plug in this procedure before each call to the mapping in a process flow and see if it works or not?
Regards
-AP -
I just installed a new hard drive and transfered my i-tunes library to the new drive. How can I make a bulk change of the location the program looks for the current songs. I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs. I have already changed the location that new files are stored to the new hard drive.
The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
tt2 -
How to change the location of all fotos in the iPhoto library?
my iPhoto 11 library is stored locally on my macbook.
however, my fotos (the actualy bits) are stored externally on a NAS box.
(or in other words: option "Importing: [ ] Copy items to the iPhoto Library" is not checked)
recently i purchased a timecapsule and i now want to move all fotos from the NAS box to the timecapsule.
i am looking for a way to batch-change the location of all fotos from let's say "/Volumes/MyNas/..." to "/Volumes/MyTimecapsule/...".
can this be done? any ideas?
thank you.
ps: i know how to deal with xml and .db/.apdb files. so don't be gentle on me ;-)Not really unless you search the forums and find the older post describing how to hack the SQLite database to accomplish this
Or use Aperture which can do this easily
However if you are using your Time Capsule as a Time Machine bakcup volume it is not a good place to put your photos - if you do you have no backup of them which means that sooner of later you will lsoe them - and sooner or later TM will fill the volume and make it impossible to add photos
LN -
How to change the location value after it is registered
hello,
I want to change the location (A) to a new schema. From what I am understanding, I need to unregister the old locatin(A) in repository browser, and then re-register it in control center, and change the schema name to my new target.
Now, I have unregisted A in the repository browser. When I come back to control center, and click the register, everything is grey out which means I cannot change the value (but i need to change the value for service name and schema), except the password value. and on the top, it says 'this location has not been registered. please complete the location parameters'.But I know on the old version, like owb 9.0.5, the grey out means this location is registered. So I am really comfused now. The location is unregisted, why cant I change the value of this location?
any suggestion will be appreciated.Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.
-
How can i change my background color in "albums" mode back to black in iTunes 11
how can i change my background color in albums mode back to black in iTunes 11?
Themes work in Thunderbird - duggabe was not refering to Firefox.
Another useful addon is theme and font changer:
* https://addons.mozilla.org/fr/thunderbird/addon/theme-font-size-changer/
However, Thunderbird allows you to modify all sorts of things.
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
Help > Troubleshooting Information
Click on 'show Folder' button
a window opens shwoing profile folder name
Close Thunderbird now - this is important
In the profile name folder, Create a new folder called '''chrome''' - note the spelling
It should be in the same place as the 'Mail' folder.
see first image below.
Open Notepad
Can be located : Start > Programs > accessories
Copy everything shown between the lines below.
Paste into Notepad.
Save as '''userChrome.css''' - note the spelling (edit updated - this was a typo error)
This should be saved in the '''chrome''' folder.
see second image below.
Restart Thunderbird.
I have chosen a yellow for you
<pre>
#f6f58c = a yellow....it is a hex code for a colour.
</pre>
You can change it if required. Remember when updating anything in the profile folders, you must close Thunderbird first.
More info on colours.
* http://www.yourhtmlsource.com/stylesheets/namedcolours.html
<pre>
* Do not remove the @namespace line -- it's required for correct functioning
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*Background colour for message list*/
#threadTree > treechildren::-moz-tree-row {
background-color: #f6f58c !important;
</pre>
------------------------------------------- -
HT201210 Why can't I change the location of my device backups?
Why can't I change the location of my device backups?
iTunes seems to force me to use my c:\ drive as the destination for all backups.
Background: I have set up my c:\ drive only for programs - all data is stored on separate drives - including my iTunes library and all media. So, I can't skinny down the c:\ drive any more without uninstalling programs.
The issue is that my 10,000 rpm, 280 GB - C:\ drive is fast but small and is now FULL after I got about 1/2 way through a 128 GB backup of my ipad. (Yes, all movies have been deleted off of the iPad to minimize the size of the backup.)
I deleted the partial iPad backup, moved all the Mobile Applications to another drive, emptied the recycle bin and tried again with my much smaller iPhone. You guessed it: the io7 update hung and both of my devices are now paper weights.
Which leaves me f*cked, anyone know how I can un-f myself?SPURCHASE wrote:
The issue is that my 10,000 rpm, 280 GB - C:\ drive is fast but small and is now FULL after I got about 1/2 way through a 128 GB backup of my ipad. (Yes, all movies have been deleted off of the iPad to minimize the size of the backup.)
iTunes movies are not part of an iDevice backup.
Videos & photos you take with the camera (in the Camera roll) are part of the backup but those should be sync'd to the computer and removed from the camera roll. -
once I have clicked a video, the colour of the link no longer changes to let me know I have watched that video; why?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
How to change my ipad passcode knowing that i lost my old one
how to change my ipad passcode knowing that i lost my old one
If you've forgotten your passcode then you'll need to connect the iPad to the computer that you normally sync to, and you should then be able to restore your content from your computer : http://support.apple.com/kb/HT1212 - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
-
I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN. What should I do now ????
To answer the second question first, the owners of the music (and that is not Apple) decide where their music can be sold. If they decide (for whatever reason) not to sell their music in a particular country, they will not let a music retailer (that is Apple this time) sell it in that country. So the "system" is beyond Apple's control.
As for your first post; (if I understand you correctly), the iTunes Store knows that you are in Russia, so using a credit card registered in Vietnam is simply going to look like you're trying to get round the system.
The credit card is tied to an address, and therefore to a country. Simply using a different country's address is not going to work.
By the way, this is a world-wide situation. It's not a matter of having to use a Russian card, whatever card you use has to be registered at an address in Russia.
Use the support link in the iTunes Store to contact Apple and see if you can straighten out whether you can buy songs, where ever you are and with whichever card you have. -
Specify field mapping when changing table location
I want to change the tables in a report to refer to database tables with a different schema, and specify the mapping of fields in code.
I already have code that changes table locations successfully when the schema does not differ, using the RAS API. As far as I can tell, the RAS API doesn't have a way of handling schema differences. Is that true?
OTOH, the higher-level CR API does appear to have a mechanism to do field mapping, using the FieldMapping event in the ReportDocument class. I've been trying to use this API for the job, but I don't seem to be able to change the location of a table in the report.
Here's an example scenario:
The report was created using an ODBC data source Source1 that contains a table Table1
I have an ODBC data source Source2 that contains Table1 as well as a table Table2 that is identical to Table1 except that the field names are all slightly different
I want to change the report so that it uses Table2 in Source2
I've managed to get the report switched to Source2 with code like this:
report.DataSourceConnections[0].SetConnection("Source2", "", id, pwd);
Here's the code I'm using to try to change the report table to refer to Table2:
Table table = report.Database.Tables[0]; // only one table in the report
TableLogOnInfo logOnInfo = table.LogOnInfo;
logOnInfo.TableName = "Table2";
table.ApplyLogOnInfo(logOnInfo);
report.VerifyDatabase();
I've also tried the simpler
table.Location = "Table2";
Neither approach changes the table location. I know this because when I preview the report I see data. Since the field names are all different, changing the location should have removed all the fields from the report. (Also, the event handler I have hooked up to the FieldMapping event is not called. Yes, I did enable the event in the ReportDocument.)
So:
How do you change the location of a table using the high-level API?
If you change the location using the RAS API, is the FieldMapping event fired? (Haven't tried this, but somehow I doubt it.)
Is there a way to do field mapping with the RAS API?
Thanks!
- rick cameronHi Rick
This is not considered a bug. It is a limitation that has been discusses extensively in many of our internal meetings. The implementation job proved to be much too massive and with highly limited ROI. E.g.; the number of requests for the feature is just not there...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Maybe you are looking for
-
Windows 8 does not remember secondary SATA hard drive letter
So, I bought an HP Pavilion with a 1TB HDD with Windows 8 installed. I burned the recovery disks, wiped the 1TB (Seagate) drive and installed a 250GB (WD) drive. I installed the WD as the primary boot and OS, and formatted the Seagate as a basic driv
-
I have found myself switched out of U.S. App Store. I am told to update my apps but I need to switch back to the US store. But mot told how to do so. Please help me somebody........
-
Installation of ASM, RMAN repository
All, I have a database instance running on a server together with its associated ASM group. I wish to create another database but when I go through the dbca assisstant and get to the page which asks the question about selecting the storage mechanism
-
FAQ: Is the Photoshop CS6 beta feature set complete?
By definition, a beta is not the final build of a product. Feature suggestions gathered during the public beta may influence future releases of the software.
-
Hello Folks, just wanted to share a little tip we came up with. Not sure if it's new or not, trawled the forums could find nothing so I'll post it and if you already know then no harm done. We were looking for a video pipeline solution for a multi sc